SQL Server 2014 :: Linking Parameter To Multiple Values
Feb 17, 2015
Attempting to build a report were you can place a specific code in the parameter field and it will return all row values based on that particular code. I have a similar report that works great, but the specific code is just in 1 column, the one I'm trying to create has the potential to have that code in up to 20 different spots. I have the report built, but the issue I'm facing is linking the parameter. Is there a way to link 1 parameter to multiple column options?
Here's an example:
Docflo Distribution Group Queue Status Pend1 Pend 2 Pend 3 Pend 4 Pend 5
ABC ABC1 Catch All NEW 123 126 125 621 129
ABC ABC1 Various PENDED 621 123 872 542 630
Right now if I were to link the parameter to the Pend1 field, I would get every line I wanted that had Pend "123", but it would not include any of the lines where Pend "123" was in Pend 2, Pend 3, Pend 4, so on.
How would I link the parameter to more than 1 column so it would return all rows with a specific code no matter which Pend column it was in?
Is it possible to assign multiple columns from a SQL query to one variable. In the below query I have different variable (email, fname, month_last_taken) from same query being assigned to different columns, can i pass all columns to one variable only and then extract that column out of that variable later? This way I just need to write the query once in the complete block.
DECLARE @email varchar(500) ,@intFlag INT ,@INTFLAGMAX int ,@TABLE_NAME VARCHAR(100)
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT) INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT) INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H SET CHANNEL1= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=1 -- updates only channel1 UPDATE H SET CHANNEL2= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=2 -- updates only channel2 SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
If I have a Select statement like this in my C# code: Select * From foods Where foodgroup In (@foodgroup) And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter? I tried meat, dairy, fruit 'meat', 'dairy', 'fruit' but neither worked. Is this possible?
I have some 5 parameters which I've specified as multi-valued and my report uses a stored procedure. When I select all values in my dropdown (parameters) within my reports nothing shows up. How can I pass multiple values of a parameter into my stored procedure such that it works?
I have a parameter "country" that currently has something like 50 labels (each with a different value) for different countries. I want to be able to design this so that I can select US, Canada and World. This requires me to put multiple values under the "World" label.
I need to somehow set up a third parameter which allows me to control the tag quantity type either by ALL - % , IS NULL, or IS NOT NULL.
I tried TAG_QUANTITY LIKE :Tags but this would only work if I had the % option select and not the IS NULL or IS NOT NULL
Any thoughts on how to format the select statement?
SELECT ORGANIZATION_ID, TAG_ID, PHYSICAL_INVENTORY_ID, TAG_NUMBER, CREATION_DATE, VOID_FLAG, TAG_QUANTITY, TAG_UOM, SUBINVENTORY, LOCATOR_ID, COUNTED_BY_EMPLOYEE_ID FROM INV.MTL_PHYSICAL_INVENTORY_TAGS WHERE (ORGANIZATION_ID = ite) AND (PHYSICAL_INVENTORY_ID = :InventoryID) AND (VOID_FLAG = 2) AND TAG_QUANTITY IS NULL ORDER BY TAG_NUMBER
I reviewed many threads and looked through many pages in my book, I cannot find my answer.
I have a report in need of carrying multiple values per parameter label. Here is the report parameter and how it is used;
Our IS system considers A-Active, L-On Leave, P-Paid Leave to be "Active" Our IS system considers T-Terminated, D-Deceased to be "Termed"
Instead of having to have the user click upon three options (A, L, P), I would like to group these and have the Label appear as "Active", while the two options for "Termed" (D, T), would appear as the second parameter option.
Does anyone know how I would get this correctly setup in the Report Parameters... module?
I am trying to select some values as default for a parameter, I add my data set,add my parameter then I  select the values in the default pane, when I run the report I get :
'the default value expression for the query parameter contains an error[BC30451] name is not declared.
When I look at the expression of the default parameter (in the report data pane under the specify values) it appears like
=new Object() {[Sty].[ST].&[1], [Sty].[ST]..&[15]} with a red scrible under the ()Â
I am using RS2005. i have a requirement in which i need to pass more than 1 value to a parameter. this parameter is used in a dataset for filtering.
Eg: if i have a parameter as @years, i want to assign values 2005, 2006 to it and use it in the dataset to filter like select.... where year in (@years).
I need to write SP where user select SUN to MON check boxes. If user select Class A with sun,mon and wed check boxes then i need to insert data as below
ALTER PROC [dbo].[sp_GetInvitationStatusTest] ( @invited_by NVARCHAR (50) ) AS BEGIN -- SELECT * FROM dbo.Merck_Acronym_Invitations WHERE invited_by=@invited_by select distinct t1.invited_isid as 'ISID', t1.invited_name as 'NAME',t1.invitation_status as 'STATUS',
[Code] ....
If you look at the where clause i have invited by , i get the desired output if i just provide 1 name in the execution such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj' But my requirement is to make the procedure work with more than one input variable such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj','sujith' now i should get the output for 2 people but if i run this i receive the following error Procedure or function sp_GetInvitationStatusTest has too many arguments specified.
how to make my procedure work with more than 1 input variable?
Below is the stored procedure i have it works fine if i have 1 value passed to @invited_by but i want to modify but i want this code to be working for multiple inputs .Lets say if i do
exec [dbo].[sp_GetInvitationStatusTest] 'Test1 . I get the desired output but i want this procedure to work for exec [dbo].[sp_GetInvitationStatusTest] 'Test1,Test2'. USE [merck_acronyms] GO
I have a stored procedure that accepts one parameter called @SemesterParam. I can pass one string value such as €˜Fall2007€™ but what if I have multiple values separated by a comma such as 'Fall2007','Fall2006','Fall2005'. I still would like to include those multiple values in the @SemesterParam parameter. I would be curious to hear from some more experienced developers how to deal with this since I am sure someone had to that before.
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
we can  assign one parameter value for each excecution of  [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??) 2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
I am trying to insert a value in the table. Sometimes the value has this symbol at the end. I just want insert the entire value except this symbol. The values can be like this that I am insert in the table
Insert into Table1(col1) Values (12345§ )
The values can be, below is just an example
12345§ 3456DER§ 5678D FGR564
I want to insert only these values from the above data
I need to compare two consecutive rows (if BEGDA of second row is 1 day greater than ENDDA of first row then I need to pick First row BEGDA and 2nd row ENDDA)
How can I accomplish the above. I need to insert distinct column from TableA to RecordProcess and col1+'Tr' to recordprocessExt.I can do it with cursor. I don't know any other way.
Also, there are other columns in Table A. I am using sql server 2005.
WE have a query which pulls revenue by country and client for the last 3 years. Right now we have each year being reported in separate columns but we would like to have the revenues for each year for each client to appear on one row. Below is the current query we have setup.
SELECT p.country_code, p.local_client_code, wwc.local_client_name, case when pr.fiscal_year = 2015 then sum(pr.local_consulting_fees*er.rate) + sum(pr.local_product_fees * er.rate) + sum(pr.local_admin_fees * er.rate) + sum(pr.local_misc_fees * er.rate) else 0 end as '2015 Revenue',
URL...let's say every student in the left table, has a corresponding table to the right. If we were to take the average of all the classes in the corresponding table, how would you be able to transfer that in the table to the left, assuming there could be thousands of these individual tables.
I am trying to write a query to calculate the running difference between data on different dates. Below is what my table of data looks like. Basically I want to calculate the difference between the total_completed for each state and date.
below is my code (I almost have what I need) I just can't figure out how show 0 as the completed_difference for the first Date for each state since there is no prior date to calculate against.
MRR_TOTALS_WEEK_OVER_WEEK AS ( SELECT T1.[Date] ,T1.States ,T2.Total_Completed ,ROW_NUMBER() OVER(PARTITION BY T1.States ORDER BY T1.States,T1.[Date]) AS ORDERING FROM TOTAL_CHARTS T1 LEFT JOIN TOTAL_COMPLETED T2 ON T1.[Date] = T2.[Date] AND T1.States = T2.States )
I have a script that needs to be run for 50 different @ClientID. I dont want to run this script individually for each clientid. Would 'SET @clientID in (111, 222, 333) work? I've been told that it wouldn't. Short version of the script is.....
Hello, I have a table called "ShoppingCart" which has fields for CartID, UniqueID and Quantity. At the moment I haven't specifed a primary key for this table becuase none of the fields are unique. I need to be able to link this ShoppingCart table to a table called "Size" using the UniqueID (both tables contain a field for UniqueID) in order to obtain the ProductID and CategoryID of the data item. I then need to link the ProductID and CategoryID I obtained from the first part of the SQL statement to a table called "plants" in order to get information from the following fields in the plants table: Common_Name, Latin_Name and Thumb_URL. So far I've been able to use an INNER JOIN with the Size table to obtain the ProductID and Category ID using.... SELECT * FROM ShoppingCart INNER JOIN Size ON ShoppingCart.UniqueID = Size.UniqueID WHERE CartID = @CartID ORDER BY ProductID I now need to be able to use the ProductID and Category ID I've obtained from this part of the query to reference the Common Name, Latin Name etc of the data item from the plants table. Is there any way that I could do this? I do sometimes wonder if I'm making this whole thing a lot more complicated than it needs to be. At the moment I'm storing details about the different types of plants the garden centre sells in the "plants" table. However, some plants are available in different sizes so I've got a table called "Size" which links to the plants table using the ProductID and CategoryID of data items. The Size table has a unique primary key field called "UniqueID" which is used to uniquely identify every plant that the garden centre sells (this cannot be done using Product/CategoryID becuase different sizes of the same plant have the same ProductID/CategoryID). I'm then storing just the CartID, UniqueID and Quantity in the "ShoppingCart" table. There must be an easier way of structuring the whole thing! I'd really appreciate any help you can offer me. Many thanks, Luke
I have a robust query that returns a dataset and the data is good, however some of the records contain the exact same data with the exception of the 'Price' field. I want to combine the records that are identical and SUM the values in the 'Price' field. My query and example return dataset is below.
Query: -------- select distinct 'On-Demand' as 'Business Line', o.OrderID as 'Order #', isnull(d.DisplayCode,'UNK') as Hub, isnull(rz.RouteID,'UNK') as 'Default Route', 'On-Demand' as 'Assigned Route',
We are consolidating some old SQL server-environments from 'OLD' to 'NEW' and one of our vendors is protesting on behalve of the collation we use on our 'NEW' SQL server.
Our old server (SQL 2005) contains databases with collation SQL_Latin1_General_CP1_CI_AS
Our new server (2014) has the standard collation Latin1_General_CI_AS
Both collations have CI and AS
From experience I know different databases can reside next to eachother on the same Instance.
The only problem could be ('could be !!') the use of TempDB with a high volume of transaction to be executured in TempDB and choosing for Snapshot Isolation Level ....
The application the databases belong to is very static, hardly updated, and questioned only several time per hour (so no TempDB issue I guess).
using different databases using a different collation running on the same instance?
I am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
I can easily query multiple servers using the multi-server query function in Central Management Server and write some of the results to logging tables. I would like to be able to do this via a scheduled job. So far I am finding that even setting up Master/Target Servers this may not work and the only workaround is either using SSIS, SQLCMD (by basically hard coding the servername) and possibly Powershell.
tell me if they have been successful just using standard jobs and querying against multiple servers?
If I can't save the results to a 'central' database/table (I can do this when in SSMS), but can still query against multiple servers I was thinking I could write the results to a CSV file that a SSIS job picks up.
I have attempted using SSIS to iterate through servers and have been plagued with intermittent connection issues when using a For...Loop container.
I have a query with huge number of case statements. Basically I need to short this query with getting rid of these hundreds of CASE statements.
Because of the nature of the application I am not allowed to use a function, and just wondering if there is a possible way to rewrite this with COALESCE().
SELECT CASE WHEN A.[COL_1] LIKE '%cricket%' THEN 'ck' + ',' ELSE '' END + CASE WHEN A.[COL_1] LIKE '%soccer%' THEN 'sc' + ',' ELSE '' END + .... CASE WHEN A.[RESIUTIL_DESC] LIKE '%base%ball' THEN 'BB' + ',' ELSE '' END FROM TableName A
