SQL Server 2014 :: Pivot IN Clause - Dynamic Columns
May 12, 2015
The first select is running fine but due to extra values added to the table the list of manual difined columns must be added manualy each time new values occur.
Is it possible to make the PIVOT's IN clause dynamicly as stated in the second script (it is based on the same table #source) when running it prompts the next error;
Msg 156, Level 15, State 1, Line 315
Incorrect syntax near the keyword 'select'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
adding or moving ')' or '(' are not working.......
select *
into #temp
from #source
pivot ( avg(value) for drive in ([C], [D], [E], [F], [G], [H], [T], [U], [V] )) as value
select * from #temp order by .........
versus
select *
into #temp
from #source
pivot ( avg(value) for drive in (select distinct(column) from #source)) as value
select * from #temp order by .....
View 3 Replies
ADVERTISEMENT
Jun 15, 2015
I have attached SQL File which Gives me the below resultset Excel.xlsx
But the problem is i am not able to round off the dynamic columns in side my PIVOT, how to rewrite the dynamic query.
View 4 Replies
View Related
Jan 23, 2014
I am trying to pivot table DYNAMICALLY but couldn't get the desired result .
Here is the code to create a table
create table Report
(
deck char(3),
Jib_in float,
rev int,
rev_insight int,
jib_out float,
[Code] .....
Code written so far. this pivots the column deck and jib_in into rows but thats it only TWO ROWS i.e the one i put inside aggregate function under PIVOT function and one i put inside QUOTENAME()
DECLARE @columns NVARCHAR(MAX), @sql NVARCHAR(MAX);
SET @columns = N'';
SELECT @columns += N', p.' + QUOTENAME(deck)
FROM (SELECT p.deck FROM dbo.report AS p
GROUP BY p.deck) AS x;
[Code] ....
I need all the columns to be pivoted and show on the pivoted table. I am very new at dynamic pivot. I tried so many ways to add other columns but no avail!!
View 1 Replies
View Related
Mar 5, 2015
I have a lookup table, as below. Each triggercode can have several service codes.
TriggerCodeServiceCode
BBRONZH BBRZFET
BBRONZH RDYNIP1
BBRONZP BBRZFET
BCSTICP ULDBND2
BCSTMCP RBNDLOC
I then have a table of accounts, and each account can have one to many service codes. This table also has the rate for each code.
AccountServiceCodeRate
11518801DSRDISC -2
11571901BBRZFET 5
11571901RBNDLOC 0
11571901CDHCTC 0
17412902CDHCTC1 0
14706401ULDBND2 2
14706401RBNDLOC 3
What I would like to end up with is a pivot table of each account, the trigger code and service codes attached to that account, and the rate for each.
I have been able to dynamically get the pivot, but I'm not joining correctly, as its returning every dynamic column, not just the columns of a trigger code. The code below will return the account and trigger code, but also every service code, regardless of which trigger code they belong to, and just show null values.
What I would like to get is just the service codes and the appropriate trigger code for each account.
SELECT @cols = STUFF((SELECT DISTINCT ',' + ServiceCode
FROM TriggerTable
FOR XML PATH(''), TYPE
).value('(./text())[1]', 'VARCHAR(MAX)')
,1,2,'')
[Code] ....
View 1 Replies
View Related
Jan 23, 2015
We have a table with 500+ columns. The data is non-normalized, i.e. there are four groups of fields for for "people", followed by data that applies to all people in the row (a "household").For ad-hoc queries, and because I wanted to index columns within each person (person 1's age, person 2's age, etc.), I used UNION:
SELECT P1Firstname AS FirstName, P1LastName as LastName, P1birthday AS birthday, HouseholdIncome, HouseholdNumber of Children, <other "household" columns>
UNION
SELECT P2Firstname AS FirstName, P2LastName as LastName, P2birthday AS birthday, HouseholdIncome, HouseholdNumber of Children, <other "household" columns>
I could get at least the P1... P2... P3... columns with PIVOT, but then I believe I'd have to JOIN back to the row anyway for the "household" columns. Performance of UNION good, but another person here chose to use PIVOT instead.I can' find any articles on PIVOT vs. UNION for "de-flattening".
View 2 Replies
View Related
Feb 3, 2015
I have this query:
SELECT TOP (100) PERCENT dbo.Filteredfs_franchise.fs_franchiseid AS FranchiseId, dbo.Filteredfs_franchise.fs_brandidname AS Brand,
dbo.Filteredfs_franchise.fs_franchisetypename AS [Franchise Type], dbo.Filteredfs_franchise.fs_franchisenumber AS [Franchise Number],
dbo.Filteredfs_franchise.fs_transactiontypename AS [Transaction Type], dbo.Filteredfs_franchise.fs_franchisestatusname AS [Status Code],
[Code] ....
I need to pivot this so I can get one row per franchiseID and multiple columns for [Franchisee Name Entity] and [Franchise Name Individual]. Each [Franchisee Name Entity] and [Franchise Name Individual] has associated percentage of ownership.
This has to be dynamic, because each FranchiseID can have anywhere from 1 to 12 respective owners and those can be any combination of of Entity and Individual. Please, see the attached example for Franchise Number 129 (that one would have 6 additional columns because there are 3 Individual owners with 1 respective Percentage of ownership).
The question is how do I PIVOT and preserve the percentage of ownership?
View 3 Replies
View Related
Mar 11, 2015
How to write a Dynamic Pivot Statement to Calculate and Organize Columns like:
CREATE TABLE #mytable
(
Name varchar(50),
GA int,
GB int,
startdate DATETIME,
enddate DATETIME
[Code] ...
Below is Our Sample Table Data.
Name GAGBstartdateenddate
Pavan 261/1/20151/1/2015
Hema 561/1/20151/1/2015
Surya 501/1/20151/1/2015
Pavan 811/2/20151/8/2015
Hema 311/2/20151/8/2015
Surya 121/2/20151/8/2015
Pavan 1041/9/20151/15/2015
Hema 301/9/20151/15/2015
Surya 6131/9/20151/15/2015
How to write Pivot Satement to get Oupt like below:
1/1/2015 Pavan Hema Surya SumTotal
Total 8 11 5 24
GA 2 5 5 12
GB 6 6 0 12
1/8/2015 Pavan Hema Surya SumTotal
Total 9 4 3 16
GA 8 3 1 12
GB 1 1 2 4
1/15/2015 Pavan Hema Surya SumTotal
Total 14 3 19 36
GA 10 3 6 19
GB 4 0 13 17
View 5 Replies
View Related
Mar 9, 2015
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error:
Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18
Incorrect syntax near the keyword 'external'.
CREATE FUNCTION clrDynamicPivot
(
-- Add the parameters for the function here
@query nvarchar(4000),
@pivotColumn nvarchar(4000),
[code]....
View 1 Replies
View Related
Jun 9, 2014
I want to generate dynamic temp table so, from one strored procedure am getting an some feilds as shown below
CM_id,CM_Name,[Transaction_Month],[Transaction_Year],''[Invoice raised date],''[Payment Received date],''[Payout date],''[Payroll lock date]
for i want to generate table for the above feilds with datatype
View 5 Replies
View Related
May 11, 2006
I have a table with 40k terms and I need to map these to a set of objects where each object is represented as a column(tinyint). The object/column name is represented as a guid and columns are added/removed dynamically to support new objects for a set of terms.
I can get the rows needed:
guid1guid2guid3guid4guid5
================================
01100
01101
I think I need to then convert this set of rows to a table which I can join to the object runtime table to start these objects if the column has a count/sum greater than 0. This is the table I think I need in order to join on guids to the runtime table:
NAME Count
===========
guid10
guid22
guid32
guid40
guid51
I don't know how to construct this table for the former table. I think it may be a pivot table, but I don't know. I have the column names:
SELECT NAME
FROM SYSCOLUMNS
WHERE ID = OBJECT_ID(#Temp)
ORDER BY COLID
NAME is a sysname, which doesn't seem to cast into a guid, also a problem when joining the runtime table with this #Temp table.
I also don't want to use a cursor to construct a table.
Thanks for any help,
James
View 1 Replies
View Related
Feb 15, 2008
I have the following Pivot Table:
Code Snippet
Declare @tblEquipment Table
(
numEquipmentID INT,
txtManufacturer nvarchar(30),
txtModel nvarchar(30)
)
Declare @tblEquipmentFields Table
(
numFieldNameID INT,
txtFieldName nvarchar(25)
)
Declare @tblEquipmentDetails Table
(
numEquipmentDetailsID INT,
numEquipmentID INT,
numFieldNameID INT,
txtFieldValue nvarchar(30)
)
Insert INTO @tblEquipment Values(23, 'Dell', 'Optiplex 270')
Insert INTO @tblEquipment Values(26, 'Dell', '1705FP')
Insert INTO @tblEquipment Values(42, 'Dell', 'Optiples 745')
Insert INTO @tblEquipmentFields Values(1, 'Monitor Size')
Insert INTO @tblEquipmentFields Values(2, 'Processor Type')
Insert INTO @tblEquipmentDetails Values(1077, 23, 2, 'P4M')
Insert INTO @tblEquipmentDetails Values(1146, 26, 1, '17')
Insert INTO @tblEquipmentDetails Values(1026, 42, 2, 'P4 Dual Core')
Select numEquipmentID As EquipmentID, [Monitor Size], [Processor Type]
From
(Select a.numEquipmentID, txtManufacturer, txtModel, txtFieldName, txtFieldValue
From @tblEquipment a JOIN
@tblEquipmentDetails b ON
a.numEquipmentID = b.numEquipmentID
JOIN @tblEquipmentFields c ON
b.numFieldNameID = c.numFieldNameID
) As SourceTable
Pivot
(
Max(txtFieldValue)
For txtFieldName IN ([Monitor Size], [Processor Type])
) As PivotTable
What I'm wondering is if it's possible to have the columns change dynamically. For example:
If lets say I only want the record with numEquipmentID of 23 to show I only want its corresponding information to show
EquipmentID ProcessorType
23 P4M
Now lets say that I want to bring back an additional record, like 23 and 26 I would like the columns to change to the following
EquipmentID ProcessorType Monitor Size
23 P4M NULL
26 NULL 17
So in essence a column will be added based on the equipmentID. Thanks in advanced.
View 4 Replies
View Related
Aug 3, 2007
I am trying to do a PIVOT on a query result, but the column names created by the PIVOT function are dynamic.
For example (modified from the SQL Server 2005 Books Online documentation on the PIVOT operator) :
SELECT
Division,
[2] AS CurrentPeriod,
[1] AS PreviousPeriod
FROM
(
SELECT
Period,
Division,
Sales_Amount
FROM
Sales.SalesOrderHeader
WHERE
(
Period = @period
OR Period = @period - 1
)
) p
PIVOT
(
SUM (Sales_Amount)
FOR Period IN ( [2], [1] )
) AS pvt
Let's assume that any value 2 is selected for the @period parameter, and returns the sales by division for periods 2 and 1 (2 minus 1).
Division CurrentPeriod PreviousPeriodA 400 3000 B 400 100 C 470 300 D 800 2500 E 1000 1900
What if the value @period were to be changed, to say period 4 and it should returns the sales for periods 4 and 3 for example, is there a way I can change to code above to still perform the PIVOT while dynamically accepting the period values 4 and 3, applying it to the columns names in the first SELECT statement and the FOR ... IN clause in the PIVOT statement ?
Need a way to represent the following [2] and [1] column names dynamically depending on the value in the @period parameter.
[2] AS CurrentPeriod,
[1] AS PreviousPeriod
FOR Period IN ( [2], [1] )
I have tried to use the @period but it doesn't work.
Thanks in advance.
Kenny
View 1 Replies
View Related
Apr 23, 2015
I found this Microsoft article for creating crosstab-like queries in SSMS.Is it possible, however, to create this same query if I do not know what the values for the columns will be? Using their example for my problem, I will not know what the values in the "IN" criteria will be because my query would be for a "rolling" 12 months (thus causing that IN criteria to change every month).I've tried declaring variables to pull in the values, but since this will eventually go into a view, I don't think that I can use declared variables.
View 3 Replies
View Related
May 26, 2015
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
View 4 Replies
View Related
Jun 11, 2014
I want to pivot a table something like this .I pivoted it successfully but the results are not correct.
Here is the example :
install-Name Fiscal year Question Answer
Washington 2010 what is the reason for install? tttttt ggg yttt o
washington 2010 reason id 12345
washington 2010 install start date 10/10/2010
washington 2010 install end date 10/12/2010
washington 2010 install status successfull
[code]....
I want the above data to get pivoted like this
Install-name | Fiscal year |what is the reason for install? | reason id | install start date | install end date |
install status |Do you feel the install is incomplete? | Is the expiration of 90 days exceeded? |
washington | 2010 | tttttt ggg yttt o | 12345 | 10/10/2010 | 10/12/2010 |
successful | | |
washington | 2010 | trtbnbthwgt hrgthjrt | - | 12/3/2010 | 12/8/2010 |
| | |
washington | 2011 | sbjeh dhebwdh dbjw | 345 | 10/10/2010 | 10/12/2010 |
successful | No | Yes ,but b b b b |
View 2 Replies
View Related
Sep 21, 2015
Can we pass dynamic values while pivoting?
Here is example
Declare @a date, @b date
set @a='2015-09-08 22:19:29.330'
set @b='2015-09-17 22:19:29.330'
create table #DateTemp(Full_Date_Text_YYYY_MM_DD datetime,Full_Date date)
insert into #DateTemp(Full_Date_Text_YYYY_MM_DD,Full_Date)
select '2015-09-09 00:00:00.000','2015-09-09'
[Code] ......
View 3 Replies
View Related
Jul 13, 2015
Basically I need to get the SUM of the sum of three columns and all three columns have nulls. To make it more complicated, the result set must return the top 20 in order desc as well.
I keep facing different issues whether I try and use Coalesce, IsNull, Sum, count, anything. My query never returns anything but 0 or NULL regardless of if I am trying to build a CTE or just use a query.
So I'm using Col A to get the TOP 20 in order (which is fine) but also trying to add together the sums of Col A + Col B + Col C for each of the twenty rows...
View 2 Replies
View Related
Jul 1, 2014
I have the following SQL which i want to convert to a stored procedure having dynamic SQL to generate column numbers (1 to 52) for Sale_Week. Also, I want to call this stored procedure from Excel using VBA, passing 2 parameters to stored procedure in SQL Server
e.g,
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation' DECLARE @Country nvarchar(MAX) = 'UK'
I want to grab the resultant pivoted table back into excel. how to do it?
USE [Database_ABC]
GO
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation'
DECLARE @Country nvarchar(MAX) = 'UK'
SELECT [sCHAR],[sCOUNTRY],[Category],[Manufacturer],[Brand],[Description],[1],[2],
[3],[4],[5],[6],[7],[8],[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],
[Code] ....
View 9 Replies
View Related
Aug 1, 2015
I have a table with following rows.
FY REVCODE Jul Jun
2015 BNQ 1054839 2000000
2015 FNB 89032 1000000
2015 RS 1067299 3000000
I am looking to convert it to
Month BNQ FNB RS
JUL 1054839 89032 1067299
JUN 2000000 1000000 3000000
I tried with the following and result is coming for one month i.e. JUL but not with the second Month i.e Jun
SELECT 'Jul1' AS MON, [BNQ], [FNB], [RS]
FROM
(SELECT REVENUECODE, SUM(ROUND(((Jul/31)*30),0)) AS JUL
FROM RM_USERBUDGETTBL
WHERE USERNAME='rahul' AND FY=2015
GROUP BY REVENUECODE, USERNAME
) AS SourceTable
PIVOT
(SUM(JUL) FOR REVENUECODE IN ([BNQ], [FNB], [RS])) AS PivotTable
Results:
MONTHBNQ FNB RS
Jul11054839 89032 1067299
View 4 Replies
View Related
Nov 4, 2015
Is it possible to pivot the output data into multiple rows?
I wanted one row for deleted data and another row for Inserted data, I was looking at UNION ALL and CROSS APPLY but to no avail.
View 9 Replies
View Related
Nov 25, 2013
I am trying to pivot some data as you would normally however I am trying to also group the pivot into three sub column groups too.
Basically the scenario is that I have three sub groups Budget, Person, RenewalDate for each Service (Service being the pivot point). So for each unique service I want to display the budget person and renewal date for each service by company.
I have created two tables to illustrate the base data and the required output.
How to do this dynamically because the number of Services is unknown, i.e. it could be 4 Services or 20, each with three sub columns, budget, person and renewal date.
Please find code below. It should be quite self explanatory as to what I am trying to do.
IMPORTANT:
1. I really need it to be dynamic
2. the Services are not standardised names, they are numbered for illustration purposes only, they vary in naming convention.
create table #BaseData
(
Company nvarchar(100),
Person nvarchar(50),
[Service] nvarchar(100),
Budget int,
RenewalDate datetime
)
[Code] .....
View 4 Replies
View Related
Mar 26, 2015
I am trying to pivot my data results so that instead of showing multiple rows for each product a client has it will show one line for each client and concatenate all of their products together.
For example, if I run the following query:
SELECT
[Year],
[Client_Name],
[Product_Name]
FROM My.dbo.Table
GROUP BY
[Year],
[Client_Name],
[Product_Name]
I get the following result set:
YearClient_NameProduct_Name
2014BobHosting
2014BobDevelopment
2014BobTesting
2014FredDevelopment
2014FredConsulting
2014MaxConsulting
2015BobHosting
2015BobTesting
What I want to get back as the result set is the following:
YearClient NameProduct-List
2014BobHosting-Development-Testing
2014FredDevelopment-Consulting
2014MaxConsulting
2015BobHosting-Testing
So, I would only get one record back for each Client for each Year with a list of all of their products concatenated together.
View 2 Replies
View Related
Dec 11, 2013
I have two dynamic pivot tables that I need to join. The problem I'm running into is that at execution, one is ~7500 characters and the other is ~7000 characters.
I can't set them both up as CTEs and query, the statement gets truncated.
I can't use a temp table because those get dropped when the query finishes.
I can't use a real table because the insert statement gets truncated.
Do I have any other good options, or am I in Spacklesville?
View 7 Replies
View Related
Mar 26, 2014
I have a query
DECLARE @DynamicPivotQuery AS NVARCHAR(MAX)
DECLARE @ColumnName AS NVARCHAR(MAX)
--Get distinct values of the PIVOT Column
SELECT @ColumnName= ISNULL(@ColumnName + ',','')
+ QUOTENAME(name)
[Code] ....
and so on.
I've tried putting my group by everywhere but it's not working. I'm missing something but what?
View 9 Replies
View Related
Jul 2, 2014
I am having trouble figuring out why the following code throws an error:
declare
@cols nvarchar(50),
@stmt nvarchar(max)
select @cols = ('[' + W.FKStoreID + ']') from (select distinct FKStoreID from VW_PC_T) as W
select @stmt = '
select *
[Code] ...
The issue that I am having is:
Msg 245, Level 16, State 1, Line 4
Conversion failed when converting the varchar value '[' to data type int.
I know that I have to use the [ ] in order to run the dynamic sql. I am not sure what is failing and why as the syntax seems to be clean to me (obviously it is not).
View 6 Replies
View Related
Sep 25, 2015
I create a report base on categories and sales of goods. Now I have Daily Info about all Products.
But I Need to present this report base on weekly periods. in pivotal format.
I family with pivotal format but change between daily report and weekly report is ambiguous for me.
View 3 Replies
View Related
Aug 6, 2015
I have below script
CREATE TABLE dbo.TestPivot(
CollectionDate DATETIME,
Products VARCHAR(40),
ItemCount INT
)
INSERT INTO dbo.TestPivot
SELECT '4/1/2015','Benz' , 20
[Code] ....
-- Original Output
ProductsApr 2015May 2015Jun 2015
Benz10-800NULL
Toyota5NULL-180
****Required output where ever we have negative values we need to display message Invalid out put message for those negative rows
ProductsApr 2015May 2015 Jun 2015
Benz10Invalid NULL
Toyota5NULL Invalid
View 2 Replies
View Related
Jul 2, 2015
I am creating a dynamic query where i am appending a where clause something like -
IF (@CurCaptureDate IS NOT NULL)
SET @where_clause = @where_clause + CHAR(10) + 'AND CD.CaptureDate = ' + @CurCaptureDate
PS - CD.CaptureDate is datetime and @CurCaptureDate is also datetime
but when executing , it gives this error - Msg 241, Level 16, State 1, Line 169 Conversion failed when converting date and/or time from character string.
i am not able to use convert here with these quotes.
i tried this - SET @where_clause = @where_clause + CHAR(10) + 'AND CD.CaptureDate = ' + CONVERT(VARCHAR(25),@CurCaptureDate )
but it makes it to -
AND CD.CaptureDate = Jul 19 2014 12:00AM. I would need the date in quotes.
View 4 Replies
View Related
May 29, 2015
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT
IF OBJECT_ID('#External_Referrals') IS NULL
DROP TABLE #External_Referrals;
GO
DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
[Code] ....
View 7 Replies
View Related
Oct 13, 2015
I would like to have a dynamic trigger on INSERT, UPDATE and DELETE. (each their own trigger).
What i want, is the trigger to log what has happened with the record. For the insert trigger, i would like to select all columns and put them in 1 column to my logging table. For the update trigger, i need the same, however for both of the old and new items.
For example:
CREATE TABLE [dbo].[TRIGGER_TEST](
[COLUMNA] [int] IDENTITY(1,1) NOT NULL,
[COLUMNB] [nvarchar](50) NOT NULL,
[COLUMNC] [nvarchar](20) NULL,
[COLUMND] [date] NULL,
[COLUME] [decimal](2, 2) NULL,
[Code] ....
When I insert an item in TRIGGER_TEST, i would like to see what is inserted in the TRIGGER_LOGGING table.
INSERT INTO [dbo].[TRIGGER_TEST]
([COLUMNB]
,[COLUMNC]
,[COLUMND]
,[COLUME])
VALUES
('test'
,'hello'
,getdate()
,0.1)
GO
I would like to see in my TRIGGER_LOGGING table in NEW:
COLUMNB='test'|COLUMNC='hello'|COLUMND='2015-10-13 16:04'|COLUME=0,10
View 0 Replies
View Related
May 16, 2007
Hi,
I have the following data in a table called "Products" :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 1 R
Panel_1 1 L
Panel_1 1 R
Panel_1 1 R
Panel_2 1
Panel_2 1 L
I need to group this data like this :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 3 L R
Panel_2 1
Panel_2 1 L
How can I do that ???
Thanks !
View 3 Replies
View Related
Mar 26, 2015
I currently have data stored in a temporary table and I would like to transpose the data into a better format. I would like for the query to be dynamic since one of the tables currently has over 500 columns.
The attached file provides an example of the table structure along with sample data. Below the first set of data is the desired final format.
View 2 Replies
View Related
Aug 15, 2015
I need to pivot my records in columns into rows. Here is sample data:
create table #columnstorows
(
Payervarchar (5),
IDvarchar (5),
ClMvarchar (2),
Paid1float,
[Code] ....
Desired result:
Payer1Payer2ID1ID2Paid1APaid1BPaid2APaid2BPaid3APaid3B
U001 U002 00100276.58 19.53 153.4896.43 53.48 200
View 6 Replies
View Related
