I have built a SQL 2014 Always on Cluster. I need to create three Availability groups and listeners in the same instance. Do I need 3 separate IP address for each listener or one IP address can be shared for all 3 Listeners ?
View 3 RepliesI've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
How to set up a specific aliased instance name. I have installed two identical named instances on a server called LONPOCSQL. The instance names are FINPROD and FINREP, so when connection to them remotely I connect to LONPOCSQLFINPROD or LONPOCSQLFINREP. My question is how can I configure it so that I can connect remotely to the instances in by referencing them as FINPRODFINPROD and FINREPFINREP?
The reason for this is that I need to replace a very old system where the applications connect to the sql servers by referencing them as FINPRODFINPROD and FINREPFINREP respectively. I'm trying to set up a 2-node SQL alwayson AG cluster for HA+DR with one server in the prod DC and the other in DR. I need both instances to live one the same box.
1. As far as I'm aware SQL Aliases only work when the connection is local, remote connections fail
2. I can't create a DNS alias called "FINPRODFINPROD" and point it at a listener name as slashes "" are not allowed in DNS CNAMEs
3. My old boss once built a SQL 2008 R2 failover cluster with two instances on it called "lonsql40lonsql40" but there is no documentation on how he did it and I can't find anything on the web
Plan to setup AG on in both default and named instance of two nodes. Can we do it ?
View 9 Replies View RelatedI have an existing 2012 default SQL Express. It's set up on a VPS managed by a third party. I have an administrator account on this 2012 Windows server. I'm not much of a sysadmin or a DBA but I get around. ;)
I've installed a new NAMED instance on this VPS and can not connect to it with client tools (SSMS). If I remote in, I can connect this way.
What steps might a seasoned DBA expect to make when getting a new named instance ready for the world.
Assign a port? Check the port?
Open the firewall for the port?
Will this new named instance listen on a different port than the previously installed SQL Express instance?
Say I have 2014 AlwaysOn setup and working:
SQLNode1 ->Instance01
SQLNode2 ->Instance02
When I setup my listener: ListenerA...Do I need to use the instance name in it?
ListenerAInstance01 or ListenerAInstance02 depending on which SQLNode is the "active" availability group?
Am I better off to use the same instance name for both nodes, since my goal is to have all databases on both instances in the same availability group and sync'd? When SQLNode1 migrates over to SQLNode2 I will need to update the instance name in my connection string on the listener from ListenerAInstance01 to Instance02? When I connect with SSMS do I just use: ListenerAInstance01 (or 02)?
I need to create a named instance on a sql cluster.
How do I perform this? Is it as simple as creating a named instance on a standalone machine? Is there anything I need to consider?
I try to connect from a pc to a SQL Server on another pc. Both pc’s are in a workgroup. I want to connect from a Windows Forms application to a named instance on the other computer. By now I have been able to connect from one pc to SQL Server on the other with tcp:smurfin, 52782.
I want to be able to use servernameinstancename (instead of portnumber) to make a connection in a Windows Forms application.
I’ve checked / tried te following:
•In the properties of the instance, tab Connections, the option Allow Remote Connections is enabled
•In Configuration Manager: TCP is enabled
•The service SQL Server Browser is started
•On the tab IPAddresses, in the section IPAll, there is NO portnumber for TCP Port. And TCP Dynamic Ports has the nummer 52782
•I have created un inbound rule for port 52782 and also for 1434 (SQL Server Browser). And to be on the save side: a rule for 1433 as well.
•Restarted the service
If I run the following code in SQL Server, that same port number (52782) is returned:
EXEC xp_ReadErrorLog 0, 1, N'Server is listening on', N'any', NULL, NULL, 'DESC'
GO
SELECT local_tcp_port
FROM sys.dm_exec_connections
WHERE session_id = @@SPID
[Code] ....
How you are handling the replication of the many instance-level objects/items (logins, linked servers, server roles, database mail, operators, on and on) to the replicas in an AlwaysOn topology.
I'm especially curious about DBAs managing larger SQL Server environments. In my current environment, we have approximately 80 production SQL instances containing about 650 databases that require high availability and disaster recovery.
We use mirroring today and have a solid, home-grown solution for replicating the instance-level items from production to disaster recovery. AlwaysOn changes things a bit since we'll have multiple replicas and of course the database could be active on any one of those at any time. So my concern is about instance-level items being created in one instance but never deployed to the other instances participating in the AG group.
I changed the Port of my named instance to use static port but still error log is giving two values ,why??
spid15sServer is listening on [ 'any' <ipv6> 50152].
spid15sServer is listening on [ 'any' <ipv4> 50152].
ServerServer is listening on [ ::1 <ipv6> 57518].
ServerServer is listening on [ 127.0.0.1 <ipv4> 57518].
Looking for query that lists all databases, in an instance, that are not accessed before a given date (e.g., not accessed before December 31, 2014)?
View 6 Replies View RelatedWhy do I leave my DB in Restoring State after attaching to the instance? Could not this fire a redo activity on Transaction Log?
Or, How does sql server undo all uncommitted transactions on active vlf during recovery?
Basically the question is, which number should I pick?
View 4 Replies View RelatedHow you would calculate the average read/write latency experienced by a SQL Server instance during a specific time window in order to monitor this for multiple instances. From this MSDN blog, I know that you have to take multiple samples and do some calculations to get the correct latency.
[URL] ...
However, the SQLServer:Resource Pool Stats object tracks these numbers per resource pool and we want to get one number for the whole server. Since there can be a different base value for each resource pool, you can't simply sum the numerator values together. Here's some sample data from a server that illustrates the problem.
object_name counter_name instance_name cntr_value cntr_type
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) default 307318919 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base default 25546724 1073939712
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) internal 2045730 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base internal 208270 1073939712
I'm thinking I would need to do some sort of weighted average, but I'm not sure if that will result in the correct value. Here's the formula I am thinking about using currently before doing the calculation over time
((default * default[base]) + (internal * internal[base]))/(default[base] + internal[base])
Then to do the calculation over time, I'd use the changes in the calculated numerator and denominator to get the average.
Does this sound like to correct way to get this value? Is there a good way to verify?
What is the needed permission to create credential except for sysadmin?
Already granted securityadmin but still user does not have permission to perform this action.
We have one table where we store all documents in one of the column called "Doc" with varbinary(max) data type.
We want to download those documents from sql table to windows explorer and i wrote BCP in sql 2005. And things were fine.
The format file I used there looks like this,
9.0
1
1 SQLBINARY 0 0 "" 1 Doc ""
Now we are in 2014 and when I try the same code with same format file, it hangs in the middle. So I changed the file to 12.0 instead of 9.0 but still not working.
in my environment I am running the SQL Server agent job.i am getting below message.
create a master key in the database or open a master key in the session before performing this operation” error
I have made a clean install of SQL 2014 including MDS on a server with Win Server 2012 R2.
After the installation I cant create new models because on an error saying that "Must declare the scalar variable "@Version_Id". "
I can see that the tables gets created in the MDS database but the models dont show up in the web interface.
I get the same error message when I try to deploy an old model.
I want to generate dynamic temp table so, from one strored procedure am getting an some feilds as shown below
CM_id,CM_Name,[Transaction_Month],[Transaction_Year],''[Invoice raised date],''[Payment Received date],''[Payout date],''[Payroll lock date]
for i want to generate table for the above feilds with datatype
I have created a stored procedure for retrieving column name, as shown below
CM_id, CM_Name, [Transaction_Month], [Transaction_Year], [Invoice raised date],[Payment Received date],[Payout date],[Payroll lock date]
Now I am trying to create a temporary table using the above generated coluimns from Stored Procedure with datatype.
we have roughly 22 people connected to one database. But after a while, their applications begin to drag due to in and out communication with the server. When i check the active connections on the sql server, some times i see 157 active connections, please how to i set a timeout or connection interval close, so as reduce the heavy load being put on the server. Or how can i automatically close connections when they get higher than 50 connections.
This settings should be sql server 2008 related.
Currently we have an AlwaysOn AG set up with a listener running on port 1433 (underlying instances are on a non default port). Great, no problems there.If we set up a second AG on the same instance with its own specific listener, can this new listener also be configured to use port 1433?
View 2 Replies View RelatedI want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?