SQL Server Admin 2014 :: System Objects Could Not Be Updated In Database X Because It Is Read-only
Jul 27, 2015
We installed SP1 for SQL Server 2014 this past weekend and got this error message in the logs. I found that if you set the db to read-write, it updates the system objects, even after SP1 has completed. Then you can set it back to read-only. I'm just posting this so other people can find it on the internet, as I wasn't able to find it specifically.
Error Log Entry:System objects could not be updated in database 'x' because it is read-only.
Problem: After installing SP1 for SQL Server 2014 you will find this message in the error logs saying read-only databases could not be updated.
Solution: Simply set the db to read-write and the system objects will get updated, long after SP1 was installed.
ALTER DATABASE [x] SET READ_WRITE WITH NO_WAIT
Then set it back to read-only:
ALTER DATABASE [x] SET READ_ONLY WITH NO_WAIT
You should then see these log entries:
System objects could not be updated in database 'x' because it is read-only.
Setting database option READ_WRITE to ON for database 'x'.
Starting up database 'x'.
CHECKDB for database 'x' finished without errors on 2015-07-25 01:02:28.143 (local time). This is an informational message only; no user action is required.
Synchronize Database 'x' (129) with Resource Database.
Setting database option READ_ONLY to ON for database 'x'.
Starting up database 'x'.
CHECKDB for database 'x' finished without errors on 2015-07-25 01:02:29.888 (local time). This is an informational message only; no user action is required.
View 0 Replies
ADVERTISEMENT
Jul 27, 2015
I have been creating databases in SQL 2008 with a primary filegroup for the system objects and a secondary, marked Default, for the data.
We are preparing a migration to SQL 2014, and the administrator is complaining he won't adopt this structure on the new servers because 'there is no benefit' and 'a backup cannot be restored (!?)'.
View 2 Replies
View Related
Oct 18, 2013
I have system database and user database file are present in G,H and W drive.The process is going to be - copy data from G to S, H to T, W to U. Rename G to X, H to Y and W to Z. Rename S to G, T to H and U to W. Reboot the servers. The original G, H and W will then be X, Y and Z. The old S will be the new G, old T will be H and old U will be W. My question is that after doing this whether my SQL server will start or not
View 8 Replies
View Related
Dec 23, 2014
I'm working on databases where statistics of some indexes (tables) are changing too frequently. Once I update them manually, one minute after they get 10-20% change, and five minutes after they get over 100% change. Tables get updated very frequently (multiple times in a second).
When I run a query to read from sys.stats, sys.dm_db_stats_properties and other dynamic views, I see that they were last updated when I did it manually, but the change rate overpassed the 500+20% (tables have multiples of 10K rows). Auto create and update statistics are set to true on all databases, and I don't know why sql server does not do that automatically.
View 2 Replies
View Related
Dec 11, 2014
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
View 3 Replies
View Related
May 5, 2014
Assume if i have a connection(Application intent readonly) starts with reading, writing and again reading data for a report. how it will works in SQL 2014 Always availability on?
View 3 Replies
View Related
May 6, 2014
we are about to start a logshipping with the secondary server in read only mode.
I just wanted to know the disadvantages of using a read only on the secondary server.
I mean whether the transactional logs will be restored periodically or it won't be restored till users are connected on the secondary server.
View 2 Replies
View Related
Aug 6, 2014
I am curious what other people have done to implement read-only routing for a large number of procedures.
Basically figuring out when to call procedures that are read-only with read-only intent.
We have a user application that passes an encrypted string to a web service that directs it to our SQL Servers.
I've been tasked with finding a way to make this happen without changing the application.
The only thing I have been able to come up with is writing something (which I did) that will identify whether something is read-only or not and storing a big list.
Then having the web service look up the given procedure and adding the intent where needed.
View 5 Replies
View Related
Jun 22, 2015
Having an annoying AG/AO problem with the read only routing side of it.
Let me give some specifics first:
2 SQL Server Instances, Not Clustered.
Availability Group is named 'Ireland'
There is a primary Replica and a Secondary Replica, named:
'IrelandPrimary' and 'IrelandSecondary'
There is a listener configured with the name 'ListenIreland' on Port 14330 (the two 3's are correct)
Read Only Routing URLS are configured as follows:
IrelandPrimary tcp://Ireland.dom.local:49891ALL
IrelandSecondary tcp://Ireland.dom.local:49841ALL
So now my problem:
When I try to connect using the ApplicationIntent=Readonly; or even using -K ReadONLY in sqlcmd I get the error telling me that my connection was actively refused.
This is connecting to the Listener, not the instance itself - that works fine. I'm at a bit of a loss now.
To explain what I am trying to achieve is a for a connection to be redirected to the secondary replica when its set for read-intent.
I've just noticed that it only fails when I specify ApplicationIntent=ReadOnly; If I omit the Intent It connects to the read-write database instead.
View 3 Replies
View Related
Jan 25, 2015
We are trying to create some alerts in our SQL Server 2014 BI edition.Issue is that, after I chose "Type" as "SQL Server performance condition alert" nothing is listed in the "Object" list box.SQL Server event alerts are working. Issue is only with "SQL Server performance condition alert".
View 3 Replies
View Related
Oct 14, 2014
We have a reporting database which is refreshed daily from prod backup and later creating new tables/views/indexes as part of the refresh job. Is there a better approach we can implement in sql 2012/2014 for this scenario since we are planning to migrate to sql2014.
View 5 Replies
View Related
Oct 8, 2015
We have always on setup in our environment with read only replica. The primary database has 2 schema one is a dbo and other xyz. We have some store procs created in dbo schema and xyz schema. These store procs are being used by SSRS reports to retrieve the data (select only) no data changes will be made.
when we run the store proc from the read only server the storeprocs in the dbo schema run fine but xyz schema are failing with the message saying failed to update the database as this is a read only...
View 1 Replies
View Related
Mar 23, 2015
I have a 2 node cluster with 2 standalone 2k14 instances having alwayson setup. As per client requirement we have created a client access point with a cname alias in dns to connect to secondary replica. Now, everytime whenerver the roles switch over one has to manually move this resource from the previous secondary node to the new secondary node. This is tedious, and should not be done manually either, so I am looking for a way to automate it so that as soon as the role switches over, the resource group after some time should also switch over to the current secondary.
Env details
xa (current primary)
y2a (secondary)
client access point (resource group): aglreadtest
View 2 Replies
View Related
Jun 19, 2015
I am setting up extended events more or less just fine, however I am a bit confused as to how to read and load them into a table for querying. In particular the offset part - is there a way to load just a given dates worth in?
I've got the files configured to be 20MB before rolling over, the XE is running all the time.
So if i load in the full file now, say that covers 2.5 days worth, when I load it again tomorrow to get the updated data I'm also reloading today, which is a waste?
I presume I am going about this wrong, but lack an example that really goes into detail of practicalities of loading this data.
View 0 Replies
View Related
Sep 15, 2015
I have 3 servers taking part in an AlwaysOn AG.
I want to grant a user READ access to only one replica, and certainly not to the principle.
How do I go about doing this?
View 4 Replies
View Related
Apr 27, 2015
How you would calculate the average read/write latency experienced by a SQL Server instance during a specific time window in order to monitor this for multiple instances. From this MSDN blog, I know that you have to take multiple samples and do some calculations to get the correct latency.
[URL] ...
However, the SQLServer:Resource Pool Stats object tracks these numbers per resource pool and we want to get one number for the whole server. Since there can be a different base value for each resource pool, you can't simply sum the numerator values together. Here's some sample data from a server that illustrates the problem.
object_name counter_name instance_name cntr_value cntr_type
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) default 307318919 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base default 25546724 1073939712
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) internal 2045730 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base internal 208270 1073939712
I'm thinking I would need to do some sort of weighted average, but I'm not sure if that will result in the correct value. Here's the formula I am thinking about using currently before doing the calculation over time
((default * default[base]) + (internal * internal[base]))/(default[base] + internal[base])
Then to do the calculation over time, I'd use the changes in the calculated numerator and denominator to get the average.
Does this sound like to correct way to get this value? Is there a good way to verify?
View 2 Replies
View Related
Jun 27, 2014
I have just upgraded a test server from sql server 2008 sp3 to sql server 2014 inplace upgrade. The compatability level of master database has not upgraded. It was showing 90 and the rest of system databases got updated to 120. Is it fine to update the compatibility level of master database ? Any precautions need to taken??
View 1 Replies
View Related
Mar 25, 2015
How can you install the System Databases to a drive other than the default?
I want the Data Files to be installed on D:MSSQLData and the log files to be stored on D:MSSQLLog.
For better, quicker answers on T-SQL questions, click on the following...
[URL]
For better answers on performance questions, click on the following...
[URL]
View 9 Replies
View Related
Dec 31, 2014
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
View 6 Replies
View Related
Mar 6, 2014
I am trying to establish the standards for naming convention in my new project. What are the best standards which worked.
View 9 Replies
View Related
Sep 3, 2014
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 6 Replies
View Related
Dec 4, 2013
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies
View Related
Mar 14, 2014
I have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
View 3 Replies
View Related
Nov 3, 2014
Query to show logins that don't have any permissions within the SQL instance? I'm tasked with doing some cleanup and have found some cases where the database was deleted or moved to another server but the logins that used it were not deleted. I'd like to identify them to research.
For instance a query to show logins that have no permissions in any of the existing databases would be handy. I'm thinking it would be complicated by the need to loop through all of the existing databases and then outer join it to the list of instance level logins. Going to try to write something like that but was hoping that a script already exists.
View 3 Replies
View Related
Nov 22, 2014
I have multiple SQL 2008 severs with databases. Also, 1 mirroring server in place.
Since my database count is increasing can i have only 1 mirroring server. Is there any limit of db at mirroring server. I would have approx. 150 databases.
View 4 Replies
View Related
Jan 31, 2015
I want to Replace The Big Log database with A new one ( A database with same structure).But current DB has many connection .
This is my plan :
1- Create a new database with same structure.
2- Rename current database to olddb with this code :
USE master
GO
EXEC sp_dboption CurDataBase, 'Single User', True
EXEC sp_renamedb 'CurDataBase', 'OldDataBase'
GO
3- Rename Newdb to current DB.
USE master
GO
EXEC sp_renamedb 'NewDataBase', 'CurDataBase'
is it true ? and Tsql code is ok ? (dont forget many of connection to curdatabase (that Is a log db) and loss some seconds data is not problems)
View 4 Replies
View Related
Apr 13, 2015
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2.
2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
View 9 Replies
View Related
Apr 14, 2015
I have a job under the SQL Server Agent, which is configured to send an email notification on failure.
The job is scheduled to run every 30 minutes.
Is it somehow possible to configure it so that it only sends one email in case of subsequent failures instead of "spamming" my inbox every half hour?
View 4 Replies
View Related
May 11, 2015
I tried to copy db from server to server by sa user ( sql login) but this error raised and the copy failed
Executed as user: NT ServiceSQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:55:24 AM Progress: 2015-05-11 09:55:24.45 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-05-11 09:56:31.87 Code: 0x00000000 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task
An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer. Management. Smo. Transfer. TransferData()The Execution method succeeded, but the
[code]....
number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:55:24 AM Finished: 9:56:32 AM Elapsed: 67.892 seconds. The package execution failed. The step failed.
View 8 Replies
View Related
May 20, 2015
Is there a better way to deal with the virtual log files?...I see several approaches in dealing/decreasing the virtual log files for a database..want to know what's the best n safest approach, from the masters here?
View 9 Replies
View Related
Jun 15, 2015
in my environment I am running the SQL Server agent job.i am getting below message.
create a master key in the database or open a master key in the session before performing this operation” errorÂ
View 5 Replies
View Related
Oct 29, 2015
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
[URL]
View 4 Replies
View Related
Jun 3, 2014
1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
3) How much RAM Required ?
View 0 Replies
View Related
