SSIS Package Runs Fine; SQL Job Fails (DBF Involved)
Jun 14, 2007
I have created an SSIS package which, as its 2nd step, picks up a .dbf table and does a Data Flow Task of putting the .dbf table into a SQL Server 2005 table (which was just truncated in Step 1).
The Connection Manager that works on the .dbf table is Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
The entire SSIS package runs perfectly when i run it from my development environment.
I then assigned this Package to a SQL Server 2005 Job. The entire package is the sole step of the job.
But when I run the SQL Job, the Job fails immediately on Step 2.
Here is the error message in View History of the SQL Job:
-----------------------------------------------------------------------------
Executed as user: DBASE01SQLExec. ...on 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:37 AM Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 0% complete End Progress Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 33% complete End Progress Error: 2007-06-14 11:48:37.91 Code: 0xC0202009 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2007-06-14 11:48:37.91 Code: 0xC02020E8 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: Opening a rowset for "scanus_process" failed. Check that the object exists in the database. End Error Error: 2007-06-14 11:48:37.95 Code: 0xC004706B Source: DBF to ScanUS_Process DTS.Pipeline Description: "component "ScanUS... The package execution fa... The step failed.
-----------------------------------------------------------------------------
Could someone suggest why this works OK within SSIS but not when the SSIS Pakcage is called from SQL?
thx very much/spirits.
seth j hersh
View 7 Replies
ADVERTISEMENT
Dec 28, 2007
I have a 7 step SSIS package that manipulates some data on a DB2 database. The package executes perfectly in Business Intelligence Development Studio. I save the package to my SSIS store and then point my scheduled task to it and it fails after about 9 seconds everytime. I have an identical job that works with a different DB2 database that works without any problem. The only difference is the database it's pointing to.
The package is executing as the same user who created it, which has sysadmin to both the SSIS store and the SQL instance the package is executing on. When I saved the package I selected "Rely on server storage roles for access control" for the protection level.
This one is driving me crazy, can't figure it out. Any idea's?
View 7 Replies
View Related
Oct 16, 2007
I was facing some issue on MP. Yesterday I changed the SQL services to use the local admin account. That didn't help my MP issue. But it may have created another issue.
When I run the package manually/locally it runs fine. But the scheduled job run and fails with the Title string.
---------------------------------
Executed as user: IL06EDM00SYSTEM. ...tart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 18452 (4814) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with ... Process Exit Code 2. The step failed.
--------------------------------------------------------------
Any ideas.
View 1 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Mar 14, 2006
I have an SSIS package created from a SQL 2000 DTS using the Migration Wizard. The package imports data from a MySQL database to a SQL 2005 64-bit database running on 64-bit windows server 2003. The package runs fine when executed from SQL Server Management Studio but when I schedule it as a job it fails with:
Executed as user: [the domain admin account]. The package execution failed. The step failed.
I've tried a lot of different ways to make this work including creating a new SSIS package. Again, the package ran fine except when it was scheduled as a job.
Any ideas would be appreciated.
thanks!
View 20 Replies
View Related
Sep 12, 2007
I'm at a bit of a loss. I've written a package that has about a dozen data flow tasks and each one loads data from text files into tables in a db. It's possible that some of the fields in the text files may have data that would need to be truncated upon insert into the db.
In the data flows, I've set the fields in the data sources I know this could happen to to ignore truncation errors. When I run this within BI Studio, everything works fine. I then loaded the package into the SSIS store on the db server and if I attempt to run it from the SSIS store or if a job executes it, the package appears to be failing because of these truncation errors that I've told it to ignore.
Am I missing something? Thanks!
View 7 Replies
View Related
Jun 23, 2006
I am attempting to write a Windows service that watches a database for uploaded files to import. When a new file is found, the corresponding SSIS package is run from the file system with variables passed through. I started development as a Windows app and copied the functionality to a service.
The app runs fine. The service does not. I get a "Failure" each time a package is executed. Everything is identical behind the scenes with the obvious exceptions that OnStart and OnStop handlers are buttons in the app. I added a script task at the beginning of one of the SSIS packages to notify me that it is even running at all. It doesn't even hit that initial task.
Again, the app will run all packages just fine. The data is imported and the results return as "Success."
The following is the code executing the package. Any help is appreciated. I've been banging my head on this one for a few days now. (Is there a tag to format a code sample?)
Dim pkgLocation As String
Dim pkg As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult
pkgLocation = sPackageFolder & PackageName & ".dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
Dim vars As Variables = pkg.Variables
vars("ImportId").Value = ImportId
vars("ProductionServer").Value = ProductionServer
vars("ProductionDatabase").Value = ProductionDatabase
vars("SourceFileName").Value = FileName
vars("SourceFilePath").Value = FilePath
pkgResults = pkg.Execute()
View 3 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Mar 27, 2014
SQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started: 11:04:59 AM
Error: 2014-03-27 11:05:31.12
Code: 0xC001602A
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
View 10 Replies
View Related
Mar 16, 2006
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
View 6 Replies
View Related
Mar 3, 2008
I have this problem executing an SSIS pkg using dtexec.
dtexec /f d:smappsssis_pkgsdts_SOAR.dtsx /REP E
Code Snippet
Started: 10:28:58 PMEnd Error
Error: 2008-03-03 22:28:59.00
Code: 0xC0202009
Source: dts_SOAR Connection manager "SourceConnectionExcel"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-03-03 22:28:59.00
Code: 0xC020801C
Source: Data Flow Task Source - CHANNEL_DATA [1]
Description: The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.
Code Snippet
However, it runs fine when I double click the package and execute it using the Execute package utility. That really puzzles me.
The package transfers data from worksheets in excel to SQL Server 2005 DB.
Both source and destination are on the same system.
Please advise.
View 4 Replies
View Related
Mar 23, 2015
I have simple query which creates tables by passing database name as parameter from a parameter table .
SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .
Note** I am not passing any database of name '20'
Exception handler error :
ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------
Error in SSIS
[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .
View 6 Replies
View Related
Dec 18, 2000
I'm trying to run a job which moves data from one machine to another. I can manually execute the package successfully, but the job always fails. I get the dreaded error message 18456, "login failis for user "". I have double checked the logins for both machines,(sql server agent AND the sql server authentication).
Also, I can run a select statement (from server_ to server_2) successfully from query analyzer i.e.
Select *
from <linked_server_name>.<database>.<database_owner>.<table_name>
however, if I run this query from server_2 to server_1 I get the failed login message similar to the error message found in the job history. Since both servers accept nt logins, where is my problem? They are both set up as linked servers, and they are both mssql oledb.
Any suggestions will be appreciated!
thanks
View 1 Replies
View Related
Dec 31, 2007
Like the name says, I'm trying hard, but I'm obviously missing something. Okay, I'm new to SSIS. I'm trying to write a job that deletes some Excel files on the server, copies some Excel files from a Sharepoint instance to the location where the deleted files were, runs an executable to manipulate those files, and then imports them to my SS instance.
the package runs fine when I run it from Managment Studio after installing it on the server. The 'execute task' fails when I run the job containing the package. After creating a proxy to have the SQL Server agent Service run with appropriate permissions, I thought I would have been rid of permissions issues (I gave the proxy way too much permission in an effort to narrow in on my issue), but I could still be missing something.
The job doesn't get into the package enough to even start writing to my log file, and all I get in the job history is the very cryptic 'DTExec: The package execution returned DTSER_FAILURE (1) ' error. If anyone has ideas, I would greatly appreciate being shown the error of my ways.
Thanks!
View 6 Replies
View Related
Feb 27, 2007
Hi all,
I try to make SSSIS packages made on my pc accesible to an other user of SSIS (both running on Windows 2000). The packages are on a shared drive in our LAN.. Some configurationfiles are use to configure the Oracle DBconnection.The same files are on the same location on both PC's
The other user can open and run the packages but from the moment the lookup buffers are loaded, we get the following errors:
Error: 0xC0202009 at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "".
Error: 0xC020824E at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties.
Error: 0xC004701A at AB_ADDRESS_DF, DTS.Pipeline: component "LOOKUP_POST_ID" (22801) failed the pre-execute phase and returned error code 0xC020824E.
Any suggestion would be most welcome.
View 3 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Mar 15, 2006
I have a 64bit Ent Ed, Created a SSIS package, deployed it, its running when running from sql server but not running as a job
View 1 Replies
View Related
Mar 13, 2008
Hi,
I need to transfer the data in A table on a 2005 instance to B table which has the same structure as A table on a 2000 instance. There are 200,000 records in A table. If I use <insert B select * from linkedserver.....>, it takes only 30 seconds. I create a SSIS package to do this. But it is very slow. After it runs 10 minutes I have to stop it. And I find that it transfers about 100 records every second. Then I change the source server and destination server. That is transferring the same data from the 2000 instance to the 2005 instance. It takes only 50 seconds. why? How to make the package used for transfer data from the 2005 instance to the 2000 instance run fast?
Thanks!
View 8 Replies
View Related
Apr 1, 2007
Hi Guys and Gals...
I have a script that runs every night to pull some data from Delphi. For some strange reason the past month it has been failing on the inital running of the script but when I close off all of the error boxes and hit the script again it runs just fine.... Please find enclosed the script . Can anyone tell me whe it is wrong... thanks in advance
View 7 Replies
View Related
Jul 10, 2006
When I run a package I created in the development Studio it runs fine but if I create a job and run it I get an error "The AcquireConnection method call to the connection manager "ODS" failed with error code 0xC0202009"
I have the package setup to use a XML config file and it works fine on all the other packages but this one will not work.
View 6 Replies
View Related
Sep 13, 2006
Herre is my connection string:<add name="PageEngine" connectionString="Data Source=MyServerSQLEXPRESS;Initial Catalog=PageEngine;Integrated Security=True;User ID=MyID;Password=MyPwd;" providerName="System.Data.SqlClient"/>When I run the app using WDE (Web Developer Express), Everything works fine. I can access and diplay data from the database with no problems. However, when I try to run it from a browser on the local machine or a remote machine it fails to create a datareader. I am using the Database factory from Enterprise Library. IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine");if (dr.Read() != false) (* this is the line it fails on every time){_ApplicationName = dr["ApplicationName"].ToString();_Version = dr["Version"].ToString();_Copyright = dr["Copyright"].ToString();_Owner = dr["Owner"].ToString();}dr.Close(); Here is the "DataReaderFromStoredProcedure" methodpublic IDataReader DataReaderFromStoredProcedure(string spName, peParameters parameters, string connection){Database db;if (connection != null)db = DatabaseFactory.CreateDatabase(connection);elsedb = DatabaseFactory.CreateDatabase();DbCommand dbCommand = db.GetStoredProcCommand(spName);dbCommand.CommandType = CommandType.StoredProcedure;Here is the error message I get:Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error: Line 53: IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine");
Line 54:
Line 55: if (dr.Read() != false)
Line 56: {
Line 57: _ApplicationName = dr["ApplicationName"].ToString();Source File: c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs Line: 55 Stack Trace: [NullReferenceException: Object reference not set to an instance of an object.]
PageEngine.ApplicationInformation..ctor(Page pg) in c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs:55
login.GetTitle() in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:45
login.Page_Load(Object sender, EventArgs e) in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:13
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 I have tried so many things found on the forums, I don't know what to do anymore![:'(]
View 2 Replies
View Related
Dec 16, 2005
Hi,
I am using Sql database in my asp.net application. the code runs fine on the machine where i m developing but when I try to run the code on other machine it gives following error--
error is related to access to database.(sql personal server is installed on local machine) I m giving the following connection string---
"Server=localhost;UID=sa;PWD=mypassword;Database=try1"
I have reinstalled the sql server using mixed mode authentication and the same sa password but still problem continues..
THE ERROR IT GIVES IS---
Server Error in '/try1' Application.
SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.Source Error:
Line 49: SqlCommand cmdSelect;
Line 50: cmdSelect = new SqlCommand("select * FROM Departments", sqlConn);
Line 51: sqlConn.Open();
Line 52: return cmdSelect.ExecuteReader(CommandBehavior.CloseConnection);
Line 53: }Source File: c:inetpubwwwroot ry1DataAccessCode.cs Line: 51 Stack Trace:
[SqlException: SQL Server does not exist or access denied.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
try1.DataAccessCode.getDept() in c:inetpubwwwroot ry1DataAccessCode.cs:51
try1.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwroot ry1Login.aspx.cs:35
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
View 3 Replies
View Related
May 24, 2008
I am using SSIS packages for data transfer, When i run the package on virtual server it takes more time as when run on a PC. After analysing i found that Package when run on Virtual server takes time in startup around (50 sec) or so.Could anyone help me with a little bit of detail description as to why it runs slow.
View 10 Replies
View Related
Jul 21, 2015
I am able to select the average, max, etc of the variable in a simple select statement but when I do the following, it doesn't work. The reason I am doing the following is because I am calculating the average and such over a 5 min interval, then saving the output as one line. That is why I condense average, max, min, and stdev into one variable which I then output. why it won't run when I have it like this but will run when it is like this?
will run:
SELECT AVG(NacTemp), MAX(NacTemp),MIN(NacTemp), STDEV(NacTemp)
FROM [DATABASE]
WHERE [UTCDeviceTimeStamp] between DATEADD(minute, -5, GETUTCDATE()) and GETUTCDATE()
won't run but I need it to:
DECLARE @now datetime SET @now = GETUTCDATE() --Universal Time
DECLARE @timeint int SET @timeint = '5' --time interval in minutes
DECLARE @time datetimeSET @time = (SELECT MIN([UTCDeviceTimeStamp]) FROM [DATABASE] WHERE [UTCDeviceTimeStamp] BETWEEN DATEADD(minute, -@timeint,@now) AND @now) -- Timestamp data will be saved as
DECLARE @comma varchar(4) SET @comma = ', '
[Code] ....
View 9 Replies
View Related
Mar 28, 2008
I have created a lot of reports using this technique, but this is the first one that doesn't work. As there is absolutely nothing special about it, I can't figure out what the issue is.
I have one dataset that uses parameters chosen from two other dataset results. One dataset result runs just fine and returns values in reporting services, but the other returns blank in reporting services. In Visual Studio, both datasets return data.
I cannot for the life of me figure out what I've done that gives this result as I've never encountered it before and use this method of parametization quite frequently.
The dataset in question doesn't even join any tables, it's a direct select distinct field"1" from table"a".
I'm running SQL2005, SP2.
Thanks for any advice.
Margaret
View 6 Replies
View Related
Dec 19, 2007
I have a problem where I have an SSIS package (SQL Server 2005) that won't run properly from SQL Server Agent, but it runs fine when kicked off manually from Integration Services -> Run Package or when run in debug from Visual Studio.
The first step in the package checks for the existance of a file via a script task. The script looks like this...
Code Block
Public Sub Main()
Dim TaskResult As Integer
Dim ImportFile As String = CStr(Dts.Variables("BaseDirectory").Value) + CStr(Dts.Variables("ImportDirectory").Value) + CStr(Dts.Variables("ImportFile").Value)
If Dir(ImportFile) = "" Then
Dts.TaskResult = Dts.Results.Failure
Else
Dts.TaskResult = Dts.Results.Success
End If
Return
End Sub
This script runs fine and the file is seen as expected when I run the package manually. But as a step in a SQL Server Agent job, it doesn't see the file.
The SQL Server Agent service is set to start up / log on as a Local System Account. I've also tried setting up a credential / proxy (using an account that I know can see and even move / rename the file) to run the job as but that didn't seem to help.
The package is being run from SQL Server (stored in MSDB) and is set to rely on SQL Server for sensitive information, so I don't think that's an issue; other packages are set up like this in terms of sensitive data and run fine.
Any ideas why my script can't "see" the file I'm looking at when it's kicked off by SQL Server agent? I've looked and looked...I can't seem to figure this out. I would really appreciate any help you might be able to offer up.
View 12 Replies
View Related
Jul 12, 2006
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
View 9 Replies
View Related
Apr 21, 2015
I've created a SSIS package that calls the access dll and fires off 2003 access reports, saves them as PDF's and emails them off.
Now this works fine when I run it manually, but when I schedule and fire off a job I get a very vague error "exception has been thrown by the target of an invocation".
I have copied the access dll to the GAC and .net framework v2.0.50727 but still no luck.
I'm using Bull zip PDF printer and those DLL's are also in the GAC
View 21 Replies
View Related
Jul 21, 2007
I am copying a simple table from a Sql Server 2005 database to an *.sdf mobile database.
I am brand new to SSIS and I am probably doing something wrong. But after executing the SSIS package all the rows and all the fields are NULL in the destination database. I put a datagrid viewer between the OLE DB Source and the Sql Server compact edition destination and I can see the real data which is obviously not ALL NULL.
Does anyone have a clue as to why it would be doing this?
Any help would be much appreciated.
Thanks...
View 1 Replies
View Related
Sep 12, 2014
When i run it from sql server data tools on the test box it runs fine. However when i run it from the ssisdb directly i get the below error.
reload table tablename1 from Excel file:Error: The "filetoload.Outputs[Excel Source Output].Columns[Product]" failed because truncation occurred, and the truncation row disposition on "filetoload.Outputs[Excel Source Output].Columns[Product]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
reload table t from Excel file:Error: There was an error with filetoload.Outputs[Excel Source Output].Columns[Product] on filetoload.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
View 1 Replies
View Related
Jul 30, 2015
There is one SP with parameters varchar, int, varchar and int. It runs perfect in SSMS. Now, I've moved into a Execute SQL task with four IN parameters. In parameter mapping, data type is varchar, long, varchar, long and parameter name is 0,1,2,3. It worked before which is great. Today, I opened this pkg for another testing but failed with the following error:failed with the following error: "Incorrect syntax near ';'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,parameters not set correctly, or connection not established correctly.
I know SP is fine as tested in SSMS. I could not understand where it could go wrong in the ssis package. Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
View 12 Replies
View Related
Jan 25, 2008
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
View 9 Replies
View Related
Mar 25, 2008
Hi..
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22
Code: 0xC0202009
Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.
Any help would really be appreciated..
View 4 Replies
View Related
