When I run a package I created in the development Studio it runs fine but if I create a job and run it I get an error "The AcquireConnection method call to the connection manager "ODS" failed with error code 0xC0202009"
I have the package setup to use a XML config file and it works fine on all the other packages but this one will not work.
I'm at a bit of a loss. I've written a package that has about a dozen data flow tasks and each one loads data from text files into tables in a db. It's possible that some of the fields in the text files may have data that would need to be truncated upon insert into the db.
In the data flows, I've set the fields in the data sources I know this could happen to to ignore truncation errors. When I run this within BI Studio, everything works fine. I then loaded the package into the SSIS store on the db server and if I attempt to run it from the SSIS store or if a job executes it, the package appears to be failing because of these truncation errors that I've told it to ignore.
Am I missing something? Thanks!
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
Hi all,
I try to make SSSIS packages made on my pc accesible to an other user of SSIS (both running on Windows 2000). The packages are on a shared drive in our LAN.. Some configurationfiles are use to configure the Oracle DBconnection.The same files are on the same location on both PC's
The other user can open and run the packages but from the moment the lookup buffers are loaded, we get the following errors:
Error: 0xC0202009 at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "".
Error: 0xC020824E at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties.
Error: 0xC004701A at AB_ADDRESS_DF, DTS.Pipeline: component "LOOKUP_POST_ID" (22801) failed the pre-execute phase and returned error code 0xC020824E.
Any suggestion would be most welcome.
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
I have an SSIS package that when run from Visual Studio takes 1 minute or less to complete. When I schedule this package to run as a SQL Server job it takes 5+ and sometimes hangs complaining about buffers.
The server is a 4 way 3ghz Xeon (dual core) with 8GB ram and this was the only package running.
When I look in the log I see that the package is running and processing data, although very very very very very slowly.
Has anyone else experienced this?
Thanks for your help
Marcus
All:
As the subject suggests I am encountering an error while running a package through an agent. Unfortunately the error does not provide much information for me to diagnose the problem, and hence the post.
I have pasted the error below and appreciate help from anyone.
Thank you,
Message
Executed as user: EPSILONSYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:16:31 AM Error: 2007-08-02 10:16:32.25 Code: 0xC002F304 Source: File System Task File System Task Description: An error occurred with the following error message: "Could not find a part of the path 'P:FinanceItems Sold Below CostItems Sold Below Cost_2007-08-01.csv'.". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:16:31 AM Finished: 10:16:32 AM Elapsed: 1.047 seconds. The package execution failed. The step failed.
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
Hi,
I need to transfer the data in A table on a 2005 instance to B table which has the same structure as A table on a 2000 instance. There are 200,000 records in A table. If I use <insert B select * from linkedserver.....>, it takes only 30 seconds. I create a SSIS package to do this. But it is very slow. After it runs 10 minutes I have to stop it. And I find that it transfers about 100 records every second. Then I change the source server and destination server. That is transferring the same data from the 2000 instance to the 2005 instance. It takes only 50 seconds. why? How to make the package used for transfer data from the 2005 instance to the 2000 instance run fast?
Thanks!
I have a SSIS package that runs fine when I execute it in visual studio but when I run it on the server as a job it fails. This is nothing to do with protection levels etc as the job is running. It fails part way through with this as the error log
Started: 2:42:48 PM
Progress: 2007-11-01 14:43:04.16 Source: Import Hon File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.16 Source: Import Hon File Validating: 50% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Hon File Validating: 100% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 50% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 100% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import MedFac File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.22 Sour... Process Exit Code 1. The step failed.
It is failing on the last file it is trying to import but it works OK on my PC.
Can anyone give me any pointers on what might be causing this.
Thanks
I have an SSIS package created from a SQL 2000 DTS using the Migration Wizard. The package imports data from a MySQL database to a SQL 2005 64-bit database running on 64-bit windows server 2003. The package runs fine when executed from SQL Server Management Studio but when I schedule it as a job it fails with:
Executed as user: [the domain admin account]. The package execution failed. The step failed.
I've tried a lot of different ways to make this work including creating a new SSIS package. Again, the package ran fine except when it was scheduled as a job.
Any ideas would be appreciated.
thanks!
Having a difficult time setting up a development environment and a set of standards for SSIS package development.
First of all, you can't run the dataflow object "SQL Server Destination" in BIDS because BULKCOPY can only be run from the actual server. So how do you test/debug a package with this object in it?
Second of all, if you create an SSIS package on a developer computer in BIDS, and then import it into the SSIS package store on your development SQL server, you can't run the package from Management Studio on the developer PC. You get the error "DTS_E_PRODUCTLEVELTOLOW" when it tries to run any of the SSIS. Do I have to have SSIS installed on the developer client machine? How do I do that without installing a full server instance on each client machine (not to mention the licsense issues)?
Lastly, what protection level would you suggest using for production? We are having issues with ODBC connection passwords being decrypted and thus package steps failing in using "EncryptSensitiveWithUserKey". What exactly does this protection level do? Our network is physically very locked down, so we arent worried about SSIS package security too much, just looking for a way for them to work reliably without having to setup complicated security scenarios.
thanks for your time.
I have created an SSIS package which, as its 2nd step, picks up a .dbf table and does a Data Flow Task of putting the .dbf table into a SQL Server 2005 table (which was just truncated in Step 1).
The Connection Manager that works on the .dbf table is Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
The entire SSIS package runs perfectly when i run it from my development environment.
I then assigned this Package to a SQL Server 2005 Job. The entire package is the sole step of the job.
But when I run the SQL Job, the Job fails immediately on Step 2.
Here is the error message in View History of the SQL Job:
-----------------------------------------------------------------------------
Executed as user: DBASE01SQLExec. ...on 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:37 AM Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 0% complete End Progress Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 33% complete End Progress Error: 2007-06-14 11:48:37.91 Code: 0xC0202009 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2007-06-14 11:48:37.91 Code: 0xC02020E8 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: Opening a rowset for "scanus_process" failed. Check that the object exists in the database. End Error Error: 2007-06-14 11:48:37.95 Code: 0xC004706B Source: DBF to ScanUS_Process DTS.Pipeline Description: "component "ScanUS... The package execution fa... The step failed.
-----------------------------------------------------------------------------
Could someone suggest why this works OK within SSIS but not when the SSIS Pakcage is called from SQL?
thx very much/spirits.
seth j hersh
I am using SSIS packages for data transfer, When i run the package on virtual server it takes more time as when run on a PC. After analysing i found that Package when run on Virtual server takes time in startup around (50 sec) or so.Could anyone help me with a little bit of detail description as to why it runs slow.
View 10 Replies View RelatedI have a problem where I have an SSIS package (SQL Server 2005) that won't run properly from SQL Server Agent, but it runs fine when kicked off manually from Integration Services -> Run Package or when run in debug from Visual Studio.
The first step in the package checks for the existance of a file via a script task. The script looks like this...
Code Block
Public Sub Main()
Dim TaskResult As Integer
Dim ImportFile As String = CStr(Dts.Variables("BaseDirectory").Value) + CStr(Dts.Variables("ImportDirectory").Value) + CStr(Dts.Variables("ImportFile").Value)
If Dir(ImportFile) = "" Then
Dts.TaskResult = Dts.Results.Failure
Else
Dts.TaskResult = Dts.Results.Success
End If
Return
End Sub
This script runs fine and the file is seen as expected when I run the package manually. But as a step in a SQL Server Agent job, it doesn't see the file.
The SQL Server Agent service is set to start up / log on as a Local System Account. I've also tried setting up a credential / proxy (using an account that I know can see and even move / rename the file) to run the job as but that didn't seem to help.
The package is being run from SQL Server (stored in MSDB) and is set to rely on SQL Server for sensitive information, so I don't think that's an issue; other packages are set up like this in terms of sensitive data and run fine.
Any ideas why my script can't "see" the file I'm looking at when it's kicked off by SQL Server agent? I've looked and looked...I can't seem to figure this out. I would really appreciate any help you might be able to offer up.
I've created a SSIS package that calls the access dll and fires off 2003 access reports, saves them as PDF's and emails them off.
Now this works fine when I run it manually, but when I schedule and fire off a job I get a very vague error "exception has been thrown by the target of an invocation".
I have copied the access dll to the GAC and .net framework v2.0.50727 but still no luck.
I'm using Bull zip PDF printer and those DLL's are also in the GAC
I am copying a simple table from a Sql Server 2005 database to an *.sdf mobile database.
I am brand new to SSIS and I am probably doing something wrong. But after executing the SSIS package all the rows and all the fields are NULL in the destination database. I put a datagrid viewer between the OLE DB Source and the Sql Server compact edition destination and I can see the real data which is obviously not ALL NULL.
Does anyone have a clue as to why it would be doing this?
Any help would be much appreciated.
Thanks...
I have two servers: one production and one development. There is a third party query that runs on both servers. Yes, the query is poorly tuned - I cannot change it. In production, it runs in 54 minutes. In development, I have tried to let it run for days and it never completes.
Here's what I have tried so far:
Compared the settings of production vs. development. The settings are very similar - the development box is larger, 4 times more memory.
Max degree of parallelism is the same on both boxes.
No compression on both boxes.
The production server is fairly busy, the development server is empty - this is the only process running on it.
Plenty of free disk space.
Updated all statistics on all databases touched by the query on dev.
Indexing is the same on both boxes.
The development box is running MSSQL2012.
The production box is running MSSQL2008R2.
What I've noticed:
The query consumes a massive amount of CPU time.
HUGE number of reads (16 million reads for 10 writes according to sp_WhoIsActive)
Largest wait types are CXPACKET, SOS_SCHEDULER_YIELD and TRACEWRITE respectively.
wait_typesum_wait_time_mspct_wait_timesum_waiting_tasksavg_wait_time_ms
CXPACKET4142765580.7176307423.5
SOS_SCHEDULER_YIELD24146944.7532725530.0
TRACEWRITE19856343.914831338.9
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
SQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started: 11:04:59 AM
Error: 2014-03-27 11:05:31.12
Code: 0xC001602A
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
I recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?
Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
When I push my SSIS packages up to my production server (which has a different data source than my developement environment) and I try to open the package on the production server, it takes forever for to validate all the steps of the SSIS package because it's trying to validate against a datasource that isnt there, so it just waits for each element it's validating to time out. This is exceptionally annoying.
Is there a way to turn off this validation 'feature'?
All:
I am working with a package that executes a stored procedure. This stored procedure makes use of a Linked Server. When I execute it in debug mode in VS 2005, it works flawlessly. However when I deploy it to the production server and execute it by going to Management Studio, connecting to Integration Services, navigating to MSDB, right clicking and choosing "run package" I get the infamous:
Login failed for user '(null)'. Not associated with a trusted SQL Server Connection. OLE DB Provider SQLNCLI for linked server [name] returned message "Communication Link Failer"
error. If I execute the stored procedure by itself on the production server, it works flawlessly. It is only when this stored procedure gets executed via the above mentioned way inside of an SSIS pack that I get this error. To me this suggest it is being executed as a different user, but I don't know which one.
Any help would be wonderful.
Thank you in advance...
AccDev
What does this mean? I am building a package with a datareader task, derived column task, data conversion task, ans several ole db destinations.
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{5A78E6D8-6AE0-4D2B-81C1-4B990840B717}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
Hi
I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB.
When I execute the package from the BIDS it execute succesfully.
However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error:
the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter.
what is the reason for this error?
I aprriciate your help.
SeoAndSo.com
I migrated a few stored procedures from SQL 2000 to SQL 2005. When the packages are run from the box where the SSIS and SQL Server (Windows server) is installed it is running fine without any issues. When run from my local machine (client) where I have installed the SQL Server Client, the same package would not execute and gives me some weird error messages. I am a local admin on the box. Is this a issue with SSIS? Do we have to log onto the box (server) and then execute the packages?
Any help is appreciated.
Thanks !
How to execute SSIS package inside of Visual Studio?
I have opened the file, but do not see any way to execute it. Please advise. Thanks
Hi
I need help for Connection string:
Requirement: When we create SSIS Pacakge using Businessinteligence studio.Each Source and Destination or whatever we using the Control required DB Connection.
we connect theDB server and Database Table through manaully .Instead of Manual i need dynamic Global varible for Connection String .How to achieve this connection string.
because suppose we create SSIS Package in Developement Server Latter We change the Server from Developement to Another Testing Server . at that time we dont requierd for changing manulay.any one pls reply me.
Same as in Dotnet we give configiration XML file .we gave the Connection strng. how to in SSIS we do?
Thanks & Regards
M.Jeyakumar
I created a package but someone else will be running it every day. When this person opens the project in Business Intelligence Studio they get build errors such as the following:
Error loading PackageName: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state."
You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
this problem is described in the article below however the only advice they offer is to "change the value of the ProtectionLevel property " however they don't specify what to change the value to. I have tried every option but it still does not work. And having them enter in a password every time is out of the question.
http://support.microsoft.com/default.aspx?scid=kb;en-us;904800
It seems there is no way for someone other than the package owner to run the package! Running them from the sql server is not an option since we don't have permission to do so. As far as I know BIS is the only way.
I am creator of this package. This package used to work fine both from studio and deployed on server. I come back this project, but can't get package even runing debug in studio with protectionLevel set as EncryptSensitiveWithUserKey or EncryptSensitiveWithPassword.
Does anyone see this problem before?
Here is my error message:
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1071611876,0x,The AcquireConnection method call to the connection manager "GEODB" failed with error code 0xC0202009.
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073450985,0x,component "get parcel from Sub Struct" (75) failed validation and returned error code 0xC020801C.
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073450996,0x,One or more component failed validation.
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073594105,0x,There were errors during task validation.
Thanks!
Have anyone successfully accomplished scheduling integration services package using management studio? or is there any other way to do this?
i am scheduling the package to run from SQL SERVER Management Studio using SQL Server Agent,but it is not working.Help is appreciated.
I am running SQL Server 2005 SP2 in Vista. I have Developer editions of everything. I am trying to get BI Development Studio and Analysis Services loaded.
I don't seem to have BI Development Studio loaded. When I go to Control Panel/SQL Server install it says it is already loaded, it needs to be modified. When I try to modify it, it isn't there.
Do I need to run this from the command line with SKUUPGRADE=1 ? Modify the registry?
Second question. Can I get Analysis Services projects loaded into my regular 2005 Visual Studio? How do I install Analysis Services into Visual Studio? Or is it always completely separate, just looks like Visual Studio but can't be accessed from there?
Thanks...Marv
Hello
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file.
Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows.
SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio.
I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
Did someone try this already?
Thanks!
Mop