Agent State Exposure Insured Name
Rogers Inc MA 100,000 John Smith
SAN Group RI 200,000 Jim Morrison
SAN Group RI 100,000 Jimi Hendrix
123 Agency MA 300,000 Mickey Mouse
Rogers Inc MA 50,000 Mike Greenwell
I want to be able to read the file and create new excel files for each Agent listed. So for Example, the above file would create 3 separate files since there are 3 different Agents listed. Each Agent file would contain the same information from the original file. The name of the file would be somethign like AgentName.xls...So the SAN group file would have this:
Agent State Exposure Insured Name
Rogers Inc MA 100,000 John Smith
SAN Group RI 200,000 Jim Morrison
SAN Group RI 100,000 Jimi Hendrix
I had created a trigger which sees that whether a database is updated if it is its copy the values of the updated row into another control table now I want to read the content of control_table into BIzTalk and after reading I want to delete it.Can any one suggest the suitable ay to do this?
We have 10 sheets in Excel File and 10 sheet contains errror data. How to load 9 sheets data in to 1 destination and error data in to other destination?
I have a stored procedure that returns a resultset AND an output parameter, pseudocode:myspGetPoll@pollID int,@totalvoters int outputselect questionID,question from [myPoll] where pollID=@pollID @totalvoters=(select count(usercode) from [myPoll] where pollID=@pollID)1. In my code behind I'd like to read both the rows (questionID and question) as well as total results (totalvoters) How could I do so?2. what would be the signature of my function so that I can retreive BOTH a resultset AND a single value?e.g.: private function getPollResults(byval pollID as integer, byref totalvoters as integer) as datasetwhile reader.read dataset.addrow <read from result>end whiletotalvoters=<read from result>end functionThanks!
Running this code on my PC via VS 2005 .Net version 2.0.50727 on the server (shown in IIS) Code is in ASP.NET 2.0 and is a VB.NET Console application SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows 2) importing each column into sql table
I have a problem with reading data from an Excel file in SSIS. I'm trying to read a column that mostly consists of decimal values, but there are couple places where column entry is 2 numbers separated by a slash (e.g. "100/6.0"). SSIS tries to be smart and identifies the column data type as decimal and when it reads the cell with the slash in it, it reads as NULL. I tried to make my excel source reader component to read that cell as a string, but it gives me an error. If anybody has come across something like this, I would highly appreciate some help
I am downloading a webpage as a text file in order to read a specific string to assign it as a variable/parameter in order to create an output file name. I would like to know how would I be able to look for a specific string and output as another variable for the rest of the package.
2015 Conforming Loan Limits ------------------------------------------------------------------------ o _Loan Limits for Calendar Year 2015--All Counties _[XLS] </DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL_FLAT.xlsx>_ , _[PDF] </DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL.pdf>_ o _List of 46 Counties with Increases in Loan Limits for 2015
[Code] ...
To explain it a more better way, I have a sample webpage text here. I should be searching for "FullCountyLoanLimitList" appended by the current year (like FullCountyLoanLimitList2015) and copy the entire file name in the text file and assign it to another variable so that I can download that specific file using WebClient connection.
I'm trying to import a flat file with ~3500 rows into a SQL-DB. SSIS extracts only around half the rows. It leaves out every 2nd row. Anyone had this problem before?
I have an existing MS SQL database (2008 R2). I have a very simple SQL script. I need to automate this script means wants to create a job which runs on a Friday basis and save the output results of the query as a excel file and then automatically sends the mail to everyone.
I’ve been trying for a while now (won’t say how long), to get BIDS to read a very simple Excel file.
I’m talking SIMPLE!! No matter what I don, SSIS keeps throwing an error, and of course it doesn’t say what the error is, so I can’t really debug it.
I’ve tried this at least 20x with flat files, and it works perfect each time. I’ve done Data Conversions, Sorting, Union All, and several other Transformations; all work perfect.
Trying to used Excel as a data source, is proving to be a mind numbing experience. Of over 20 different attempts, it hasn’t worked even once. I can make it as simple as you can possibly imagine, and SSIS, refuses to even perform the first step (I’m not even trying to create a table in SQL Server anymore).
I have the Excel file path (very simple)
I have the Excel version (very simple)
I have the Connection Manager (very simple)
I have the Sheet name (very simple)
All I can do is see a preview of the Excel sheet before the process runs. As soon as I het F5, I get an instant error, for no reason whatsoever, and no debugging options,whatsoever.
I have a SSIS package which reads an excel file and loads data into a table using script component(C#) as a source. The package runs without any errors when I manually run it on my machine and on the server. But the package fails when run as a SQL Server Agent job.
I tried all the possible fixes I found on the web but still can't get it to work.
I have a package that writes information to a table in sql server 2005. I created an Excel file called ErrorLog.xls with column headers: AccountNumber and Date. I have a Data Flow Task that inserts from SQL into the Excel File. This works fine the first time. However, I then want to rename the Excel File, delete and recreate it with just the column headers AccountNumber and Date. I need the Excel file to be empty every time the package runs. I am able to create an Excel File using Script Component but how can I also add the headers? Thanks
Whisky-my beloved dog who died suddenly on the 29/06/06-I miss u so much.
I have an SSIS package that imports from an Excel file with data beginning in the 7th row.
Unlike the same operation with a csv file ('Header Rows to Skip' in Connection Manager Editor), I can't seem to find a way to ignore the first 6 rows of an Excel file connection.
I'm guessing the answer might be in one of the Data Flow Transformation objects, but I'm not very familiar with them.
While handling errors in a flat file I am routing the rows into the excel sheet to business for further processing. I need to send a mail attaching the excel sheet which contains the errored-out/In-Complete definitons. The problem is I need to send a mail if and only if there is at least one row in Excel sheet. How Can I count the rows exist in excel sheet? and send the rowcount to a variable and use that value of a variable to send a mail?
I am splitting data from SQL table and sending it to excel file but everytime i rerun the package ,it appends the existing data in excel file ..I tried using execute sql task with excel connection and write drop table `tablename` and then one more execute sql task with create table `tablename` (`Id` int ,`fname` varchar(100)) ....But it does not seem to work.
I have a SSIS package running well in production however sometimes the package will fail when the excel file contains more than 25000+ rows.
The SSIS package is run by SQL Server Agent and is set to run in 32bit mode.
I checked the data by loading in batches and all data loaded successfully. But the funny thing is when I run the same package on my local development PC using BIDS and the same data file. The package loads all 25000+ rows successfully.
Is there some setting that is preventing all rows loading in the server environment.
I have a table customer wich has the columns phone_number(char type) and ok_to_call(bit type). There are already data in the table and the column ok_to_call only contains the value false for every row.
Now i want to update the latter column. I have a text file with a list of phone numbers and i want that all the rows in the Customer table(phone_number column)that matches the number in the text file to update ok_to_call to true.
This is to be done in SSIS(Integration Services). I'm new at this and i've looked around that tool but is a lot of items, packages and stuff so i dont know where to begin.
Would appreciate help on how to solve this issue in SSIS. What controlflow/Data flows to use,wich items and packages to use, how to configure and how to link together?
I searched the list but did not see anything related.
I cannot open a file directly exported from RS in the Excel format. If I open the file in the Windows version and then close it, no need to even save it, I can then open it with the Mac version of Excel. The file size after closing is about 2K less so the RS program is adding something onto the file that the Mac version does not like. It will crash Excel when trying to open.
I cannot export the report as CSV as it will not correctly import into Excel on the Mac.
helo.. I have 100,000 rows in the database and I want to read results for eg: from 5000 to 5050 by DataReader. I wrote this code to do this but its too slow:
Dim SlctStr As String = "select * from topicstbl where partID like '" & PagePartID & "'"
Dim ReadCom As New SqlClient.SqlCommand
ReadCom.CommandText = SlctStr
ReadCom.Connection = MainLib.MyConnection
Dim MyReader As SqlClient.SqlDataReader = ReadCom.ExecuteReader()
Dim StartTNum As Long = 5000
For IR As Long = 0 To StartTNum - 1
MyReader.Read()
Next
Do While MyReader.Read
StartTNum += 1
If StartTNum > 5500 Then Exit Do
'''''''''''''''''''
Loop
MyReader.Close()
is there another way to do the same thing better off than this code?
I have the Excel Connection Manager and Source to read the contents from an Excel file. For some reason couple of numeric fields from the Excel worksheet are brought over as nulls even though they have a value of 300 and 150. I am not sure why this is happening. I looked into the format of the fields and they are set to General in Excel, I tried setting them to numeric and that did not help.
All the other content from the excel file is coming thru except for the 2 numeric fields.
I tried to bring the contents from the excel source to a text file in csv format and for some reason the 2 numeric fields came out as blank.
Any inputs on getting this addressed will be much appreciated.
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS 1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
I created a system DSN for an Excel file and I have been using it for awhile. I can read from it as well as update it. (The Excel fileincludes weekly updates to some records.)Then I tried to create the same connection with an explicit connectionstring. It opens the file fine, I can read from it and all. But whenI try to update it, it complains that the database is read-only. I amusing the connection string: "Driver=Microsoft Excel Driver(*.xls);DBQ=excel-fle-path;Uid=;Pwd="Is there a switch to include to say that I would like to open the Excelfile as a read/write database just like via the ODBC set up?
Hi Team, I have created on SSIS package which export data from excel to SQL server 2005.It's working fine.Now I am trying to make it dynamic using variable. It means I wil just change the path or name of the excel file How to access excel file using variables ? Need help any link,suggestion .....
Hi, I have an excel spreadsheet with several sheets. These sheets get populated with data from an external source database i.e. a third party application. I would like to create a SSIS package to read the data in each sheet. Please note that I do know how to create SSIS package to read an excel file with only one sheet. Is there a functionality in SSIS to loop though each sheet in one excel file? Thanks
Hi all, I have a huge data set captured in excel file which contains 90 worksheets. There are total 3 worksheets I need to work on.
I need to load/transfer them into a table. How do I import them into SQL? Can SQL read/load excel by reading each worksheet (sheet1, sheet2...sheet90)?
Any suggestions are welcome and highly appreciated!
