SSIS Loading Excel Validation Error?
Sep 20, 2007
I created a package loading Excel file. I developed the package using test excel file c:TestTest.xls and use a config file to assign actual folder (the file names will be got from a foreach loop container) when run it.
However, the package cannot run with a configure file which specify a different source folder and still ask for test.xls. It's not possible that it require reset the folder and file every time when it's used for a new folder.
Information: 0x40016041 at Package1: The package is attempting to configure from the XML file "C:workingFinal3.dtsConfig".
SSIS package "Package1.dtsx" starting.
Information: 0x4004300A at Load Raw1, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at Package1, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine could not find the object '\SourceFolderTest.xls'. Make sure the object exists and that you spell its name and the path name correctly.".
Error: 0xC020801C at Load Raw1, Excel Source [1188]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Load Raw1, DTS.Pipeline: component "Excel Source" (1188) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Load Raw1, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Load Raw1: There were errors during task validation.
SSIS package "Package1.dtsx" finished: Failure.
View 7 Replies
ADVERTISEMENT
Aug 3, 2007
Hi All,
We did the development of SSIS packges on 32 bit machine. We have few excel files which is loaded using SSIS.
Now the same was deployed to anothe rmachine(64 bit). This 64-bit machine does not have Microsoft office installed.
And all packages(which loads excel files) failed. Hence can someone answer my following questions:-
1) In order to load excel files using SSIS, is it necessary that Microsoft excel software should be installed on that machine?
2) If answer to above is yes, Can Microsoft excel viewer be used instead of Microsoft office(excel)?
Thanks
Sid
View 5 Replies
View Related
Nov 6, 2007
I have an excel sheet that has a bunch of columns. Some of these columns have static data but there are a few of the columns that retrieve data by making calls to servers and returning values that populate these columns. Usually about 30 mins before the columns are populated.
I then need to to load the excel sheet into a table.
I was wondering if there was anyway by which we can make the connection to the excel sheet and then force a delay of about 30 mins before it starts retriving the data?
Is this possible in ssis? Or can I achieve it by some other means?
Thanks for any help in advance
View 6 Replies
View Related
Jun 1, 2015
I have a SSIS package running well in production however sometimes the package will fail when the excel file contains more than 25000+ rows.
The SSIS package is run by SQL Server Agent and is set to run in 32bit mode.
I checked the data by loading in batches and all data loaded successfully. But the funny thing is when I run the same package on my local development PC using BIDS and the same data file. The package loads all 25000+ rows successfully.
Is there some setting that is preventing all rows loading in the server environment.
View 4 Replies
View Related
Aug 5, 2015
How to load .xlsb file using Excel source component in SSIS. Below is the connection manager i see in the properties window.
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=;Extended Properties="Excel 8.0;HDR=YES";
Do I need to change any values here to process .xlsb file
View 2 Replies
View Related
Feb 8, 2008
Hi,
I recently received a new laptop at work with windows vista on it. Having BIDS 2005 installed I wanted to modify an existing package (stored on our network) that I developed months ago. But I can't execute this package on that machine as I get this error:
[Connection manager "MyConnectionManager"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. [Log provider "SSIS log provider for SQL Server"] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MyConnectionManager" failed with error code 0xC0202009.
I really don't understand this because the connection manager works ok. Plus I use package configurations with settings stored on a SQL Server 2005.
Also, the same package works fine on the older machine.
Any idea ?
Thanks in advance
Pat
View 3 Replies
View Related
Aug 3, 2007
Hi All,
I have SSIS package which loads excel data in SQL server. Now when I execute the package by double clicking it(GUI Utility for Dtexec) or by running it in SSIS Editor it works great.
However if I run it using the command line dtexec.exe then following error arises. Note that machine on which I am executing does not have Microsoft Office installed and is 64 bit.
Error: 2007-08-03 16:53:27.42
Code: 0xC0202009
Source: PkgExtract Connection manager "SRC_Connection"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2007-08-03 16:53:27.42
Code: 0xC020801C
Source: Data Flow Task - Extract Data Excel Source [1860]
Description: The AcquireConnection method call to the connection manager "SRC_Connection" failed with error code 0xC0202009.
End Error
Error: 2007-08-03 16:53:27.43
Code: 0xC0047017
Source: Data Flow Task - Extract Data DTS.Pipeline
Description: component "Excel Source" (1860) failed validation and returned error code 0xC020801C.
End Error
Any pointers or help is greatly appreciated.
Thanks
Sid
View 11 Replies
View Related
May 20, 2008
Hello,
I recently joined a company that is having an issue connecting to SQL Server Integration Services on one of their production servers. When trying to connect via management studio, both locally and remotely, they receive the error below. The server is a 64 bit server and is using third party replication (Veritas).
It sort of sounds like the issue described in this knowledge base article: http://support.microsoft.com/kb/919224. However, we do not have a problem creating maintenance plans. I'd just give it a shot but its a production server and getting approval to do anything that modifies the registry with the registry replication setup is a pain, so I'd like to determine if there could be another cause first.
TITLE: Connect to Server
------------------------------
Cannot connect to ***************.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
Mar 14, 2006
During dev. I _know_ certain things are invalid. I don't need the validation, it just wastes a lot of time...
View 3 Replies
View Related
Dec 6, 2007
Hi all,
I have problem with SSIS. When I open my packages, I always get an error message which says like this:
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
And, in error list, I get this error message:
Error loading DIM_BUSINESS_TYPES.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'user'.".
But the package itself seems doesnt have any errors at all. When I try to run the package, it runs fine.
Btw, I use package configuration which is stored in sql server table, including the password for connectionstring.
So, what's actually wrong with my package?
Thanks
View 10 Replies
View Related
Jan 25, 2008
Hi,
I am trying to load data from one database to another database with in same sql server.Our DBA has created a new db and I am trying to load data in to this new one.But I am getting error in SSIS packages while scheduled as job. The failed job history was not showing much information So I ran the package dirently to get more info on error message.
I was able to transfer around 5 to 6 tables . But I am unable to transfer the final 2 tables. I am thinking its a space issue. Appreciate if somebidy can explain what the real problem is ?
Below is the error information I got in SSIS
[OLE DB Source [1]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available. ".
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
View 12 Replies
View Related
Feb 20, 2008
Below is the error, Thanks!!
[Data Conversion 1 [157]] Error: Data conversion failed while converting column "Media Type" (89) to column "Media Type" (201).
The conversion returned status value 4 and status text "Text was truncated or one or more characters
had no match in the target code page.".
[Data Conversion 1 [157]] Error: The "output column "Media Type" (201)" failed because truncation occurred, and the
truncation row disposition on "output column "Media Type" (201)" specifies failure on truncation.
A truncation error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Data Conversion 1" (157) failed with error code 0xC020902A.
The identified component returned an error from the ProcessInput method. The error is specific to the component,
but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - Test" (1) returned error code 0xC02020C4.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
View 11 Replies
View Related
Mar 5, 2008
I was trying to load SSIS shipped from my colleague. It has configuration file with his SSIS. I added this one to my local project. I removed configuration file from my project. In case anything goes wrong, I also delete OLE DB Connection String, and recreated one. Modified all data flow and control flow for any connection to point to my new one.
After the modification, it still fails on login 'sa'. I cannot figure out the problem. Is there any tricky inside of SSIS configuration file?
View 12 Replies
View Related
Feb 19, 2007
When I try to load an SSIS package via C# code I get the following error message:-
"The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
"
The code is pretty straightforward:-
Application app = new Application();
PackageEvents evts = new PackageEvents();
Package pkg = new Package();
Package pkg = app.LoadPackage("C:\Documents and Settings\dominic_s\My Documents\Visual Studio 2005\Projects\SSIS_Util\bin\Debug\DTS\Cleanup_Staging.dtsx",evts,true);
return pkg;
What's interesting is this error message only appear's when I Start Debugging (F5 in VS 2005). If I Start without Debuggging (CTRL+F5) I dont get this error message. I've tried almost everthing suggested by other posts in this forum related to the same issue but nothing seems to work.
Any help will be greatly appreciate...thanks!!!
View 4 Replies
View Related
Jul 17, 2007
Good day all,
I am having an interesting SSIS problem where the package fails to load with the following error message:
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".
This very same package runs on our test server, but fails to even load on UAT server.
SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte)
DTExec version is 9.00.3042.00 on both servers.
HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.
This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).
Any help is greatly appreciated.
Thanks,
Alex
Here is the compete output from DTExec:
Code Snippet
D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:33:21 PM
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails.
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010021
Source:
Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint".
End Error
Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014.
Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
Source:
Started: 12:33:21 PM
Finished: 12:34:53 PM
Elapsed: 91.938 seconds
View 7 Replies
View Related
Mar 9, 2006
Hi,
Anyone who can tell me why I get this error !
I can connect to Integration services on the server from another client.
Pls help
//T
View 10 Replies
View Related
Jul 19, 2006
Got above error on clustered sql2k5 x86 when connect to SSIS, any solution?
View 2 Replies
View Related
Oct 5, 2015
I've been working on an SSIS package trying to load some data and the archive sequence is faulty. I've been trying to load a few tables created in a previous sequence into a local archive file and I've been getting the error "Could not find a part of the path."
The results aren't telling me what it's finding last and so I don't know where to start.
And the source DOES have data in it. It's something between the source and the destination.
View 2 Replies
View Related
Nov 18, 2005
HiI'm rather new to ASP.NET (was working with win forms before) and having a few problems with my first app. To the point - this is an internal system - every week about 50 branches send financial reports to the headquaters where those excel files are validated against data in sql server. after file is uploaded to the server I'm opening it using Excel object model and iterating through it line by line. Apart from format and datatype checking, for each line there are ~2 stored procedures invokedEverything is working actually but my concern is performance.. After about 800 rows it is getting really slow.. Appreciate any comments on this.thanksAM
View 1 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Jul 11, 2006
ts my first time trying to set up a SSIS job using the import/export wizard to export the results of a query into an excel file.
i am using sql server 2005, windows XP SP2.
In the last step in the excel destination editor, in the connection manager when i am trying to select the excel file to write into i am getting this error.
'Microsoft.Jet.OLEDB.4.0 ' provider is not registered on the local machine.
I have set up the excel connection manager. i have changed the properties of the project to set
the Run64BitRuntime to false.
i am running the latest version of MDAC 2.8 on the machine too
please let me know if there is anything else i need to do to fix this.
thank you in advance
View 1 Replies
View Related
Jan 2, 2008
I am getting an error when an while tranfering data from excel
the error is
[Excel Source [31]] Error: There was an error with output column "Problem Description" (61) on output "Excel Source Output" (39). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
[Excel Source [31]] Error: The "output column "Problem Description" (61)" failed because truncation occurred, and the truncation row disposition on "output column "Problem Description" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "Excel Source" (31) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
The "Problem Description " is a free text field
.I am also pasting a sample data from this field
Try to login to the Operational Risk System- EDCS system (https://oprisk4-dev.ny.ssmb.com:26539/siteminderagent/forms/login.fcc?TYPE=33554433&REALMOID=06-000f3e21-1533-1105-9e71-8088cb990008&GUID=&SMAUTHREASON=0&METHOD=GET&SMAGENTNAME=$SM$ZlvK8bQN3Gx6kXd9LY%2fFTznf3Vi5QSreVbn0vxHs7IUR6gJ9ncq2qnEXtM4wBS0%2fGP%2bU8qMBqC8%3d&TARGET=$SM$%2foprcs%2fjsp%2fcs%2ejsp"), but get the following after entering my id and password:
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
--------------------------------------------------------------------------------
Please try the following:
Open the oprisk4-dev.ny.ssmb.com:26539 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
Please help how to import this data without any error.
JigJan
View 2 Replies
View Related
Mar 24, 2008
All, I am trying to load excel data into sqlserver through SSIS.
I have only one field in excel which has 6 rows as below.
The first row(<1) is loading into sqlserver as null value. Sqlserver destination table field is VARCHAR(10). Please help me on resolving this issue.
<1
1
2
3
4
5
View 1 Replies
View Related
Apr 20, 2007
I am writing a SSIS package to load a lot of Excel files. I use SQL statement to select the Excel data. However, I found it's hard to dynamical set the table name (Excel Tab name) - the user name the Tab differently.
Any clue or better solution? Thanks,
View 1 Replies
View Related
May 20, 2008
Can this be done in SSIS?
I have an xls spreadsheet with multiple worksheets. From each worksheet I need to load the data into sql server. The data I need to retrieve from each worksheet is not row by row, but cell by cell. For example, I need to load data from cells C44, G65, I23, A78, etc. in all the worksheets. Is this possible using SSIS?
View 3 Replies
View Related
Jun 28, 2007
Hi , I am facing constant errors while trying to do a simple Export from SQl server database table to Excel File. I am unable to Do any mapping from teh table to the Excel File , if the Column Headers in teh Excel File are not present. Do you have any inputs on how to proceed with the Data Transfer, without having any headers in the Excel File. My requirement doesnt need to have Column headers in teh Excel.
Any help is appreciated!
Thanks,
Deepti
View 2 Replies
View Related
Oct 23, 2007
I am exporting data to excel with ssis package.In my system it is working fine., but in server it is giving this error.All the connection string for database and excel file path are coming correct in run time with the help of package configeration.
one more thing is if we execute directly the package by double clicking in server it is working, but through my application it is giving this error.
An OLE DB error has occurred. Error code: 0x80040E09.
The ProcessInput method on component "Excel Destination" (22) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Thread "WorkThread0" has exited with error code 0xC0202009.
someone help me.. thanks in advance.
View 4 Replies
View Related
May 16, 2008
Hi to all!
When I want to execute my package as a job in a SQL Server 2005, I get this Message:
Executed as user: EDAsvcSQLServerPMS. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 09:46:00 Error: 2008-05-16 09:46:01.41 Code: 0xC0048020 Source: Data Flow Task Data Flow Task (DTS.Pipeline) Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048020 Source: Data Flow Task DTS.Pipeline Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048021 Source: Data Flow Task Excel Source [1] Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Excel Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://ww... The package execution fa... The step failed.
The package works fine on the developed server but when I try it out on our integration server it won't go through without these errors. The protection level is set on DontSaveSensitiv and allready I had an error less.
I hope someone can help me, because I can't find anything with google.
Thanx!
Regards,
swisskiwigirl
View 6 Replies
View Related
Mar 26, 2008
I have several SSIS packages, some of which retrieve data from excel files - they work fine from th VS designer until I try to store configurations in a SQL database - then I get the following error:
SSIS package "ITAMdiv2.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ITAMdiv2, Connection manager "ExcelDIV2": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [84]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ExcelDIV2" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (84) failed validation and returned error code 0xC020801C.
any ideas?
Thanks in advance@!
Bob
View 1 Replies
View Related
Jun 25, 2007
I have created a package which transfers data from a SQL server source to an Excel Destination. The DataFlow Task works fine , if i pre-define the column names in the Excel Destination... But i run into an error when i give the blank excel sheet as my destination. I am unable to map any columns
A sample example is as shown above .. In the column mappings field only one column in the Excel shows up for mapping and eventually throws the error "[Excel Destination [42]] Error: The number of columns is incorrect. "
How do we proceed in this case , where in we do not want to give pre-defined coulmn names in the Excel Destination sheet.
Thanks,
D
View 4 Replies
View Related
Mar 13, 2008
Hi,
I have a simple loading to excel destination. It has 900,000 records. In 66,000+ records, i has an error
Error: 0xC0202009 at Data Flow Task, Excel Destination [3286]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at Data Flow Task, Excel Destination [3286]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Excel Destination Input" (3297)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Excel Destination Input" (3297)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Excel Destination" (3286) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC02020C4 at Data Flow Task, OLE DB Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I assume that this is caused by the no. of records im loading since the .xls file can only contain 65,000 records.... i tried using the .xlsx file but i guess it only accepts .xls.
What's the alternative to load to excel 2005 with this numbers of records?
thanks.
cherriesh
View 1 Replies
View Related
Nov 2, 2015
We have a 2014 SQL Server. I have a SSIS package written in VS 2008 where I am simply importing an .xlsx into an existing table via a mapped drive. I have it working on my development machine using the 2007 Access 32 bit driver from [URL]..... Our DBA is trying to schedule the package to execute on a schedule job on the 2014 server and we received an error. He installed the 32 bit driver and still getting the error. I set the package to run in 32 bit and we are still getting the error.
Date 10/30/2015 2:51:18 PM
Log Job History (BD_ISS_Websites_New1)
Step ID 1
Server ETSSQL2014DEV
Job Name BD_ISS_Websites_New1
Step Name ISSWebsite
Duration 00:00:01
[code]....
View 3 Replies
View Related
Feb 25, 2004
I need to be able to load data from an Excel spreadsheet into SQL Server via a web application. I was able to load the spreadsheet data into the application and store it into a DataSet. How do I get the data in the dataset into a table in SQL Server?
View 1 Replies
View Related
