I need to query the contents: Look in Table A of such sets (A, B), which are not present in table B
To illustrate:
Tab A
A....B
aa..kr - this set does not occur in Tab B
bb..gh
vv..kl
cc..er
ss..we
[code]....
Hi
I have an existing instance of sql express 2005 w/advanced services installed. When I installed I did not install full text search. Is there a way I can enable full text search on this existing instance?
Thanks
Below is sample SQL:
SQL_1: Creates a database
SQL_2: Creates 2 stored procedures
Now, I need to search database SP`s for Table2 t2 ON t2.CID = t1.CID and ALTER them with Table2 t2 ON t2.CID = t1.CID.
INNER JOIN Table3 t3 ON t3.CID = t1.CID
WHERE CustGroup = 'Employees'SQL_1:
USE [master]
GO
[code]...
Hi,
I have to search the records after the records populated.
I mean to say, i have displayed records in report, if i enter some strings in the textbox and clicked find, then it will highlight the particular records, instead of highlighting the values, is it possible to display only those particular records.
For example, say i have 50 records in a page,i entered some strings in the textbox and clicked find, then it will highlight the particular 5 records one by one which match the criteria i have entered in the texbox, instead of that i have to display only those 5 records.
Please tell me how to implement in this report,
Thanks and Regards
Altaf Nizamuddin
I have one table of new records (tableA) that may already exist intableB. I want to insert these records into tableB with insert if theydon't already exist, or update any existing ones with new data if theydo already exist. A column (Action) in tableA already tells me whetherthis is an INSERT, UPDATE, or DELETE. I'm able to derive that I can doan insert withselect * into tableB from tableA where Action = 'INSERT'....and I think I can handle the delete.But I'm stuck on the update. How do I do the update? An ordinaryUPDATE statement just won't do unless I use a cursor to cycle throughthe recordset. I want to avoid a cursor.
View 1 Replies View RelatedI have a following problem: I€™m importing records from an Access table into a SQL Server Table. I€™m using lookup to determine if a record already exists in the SQL Server table and in that case I should update the record if it was modified.
I thought of using OLE DB Destination for new records (done, works fine) and OLE DB Command Transformation to update the modified records. It all works but the thing that bothers me is that my table has approx. 40 columns so my OLE DB Command is very long (update table set col1 = ?, col2 = ?, col3 = ? €¦€¦). The other problem is that I€™m always updating all the columns even if only one column was modified.
Is there a better way to update the existing records?
Any help is appreciated.
Thanx
Sara
I have a table that stores all the processed data from other tables. How can I replace the same data in this table when I do "reprocessing"? It's kinda like a combination of delete then insert kind of thing. I cannot simply insert as it will become duplicates. any idea?
View 3 Replies View Relatedhi
I have data in two tables.
NAMES
IDName
1FIRST
2SECOND
CODES
IDCodeTypeCode
1Axyz
1Babc
1Cgfd
2Axdz
2Bdca
I want to join the two tables to add the Code of CodeType "C" to the records of NAMES
Result Example
IDNameCode
1FIRSTgfd
2SECOND----
I want to have all records from the names with the codetype C, if there is no record with the codetype c for a given ID, the cell should be blank to identify for which ID's the CodeType C is mising.
how should the sql statement look like?
Please help!
thanks in advance!
Mikk
Hi,
I'm building a package to import data from a flat file into a Customer table, and I have set up a Lookup to check if that customer already exists in this table, and if so, perform an Update command instead of the bulk load. I don't expect many updates, if any, this is why i just used the OLE DB Command instead of using a staging table.
I've a bit of a problem executing this within a transaction and having the lock table option set on the SQL Server Destination. Is there anyway I can get Transaction support for this Data Flow working, as I want to be able to rollback a complete file/import if possible.
Thanks
Trent
Good Morning, I need some assistance with SQL Server 2000 Importing Data.
When I import data from a text on a routine basis, three things must happen:
1. New records identified by primary key get appended to table.
2. Exisiting records identified by primary key get overwritten with new/(updated) data.
3. All other existing records are left alone.
Does anyone know how to Import Records with the following the criteria above? It cannot insert duplicate primary keys by nature, so it must overwrite those records!
This is being built into a DTS Package, but I need to get over this obsticle! Thanks for any guidance!
I currently have a table called stores. I've just added a uniqueidentifier column called store_guid to the stores table. The table currently has about 500 records in it and now i'm trying to set each store_guid = to a newid(). I've tried using UPDATE stores SET store_guid = newid() . however, that doesn't work because i think it's trying to set each record equal to the same guid using that approach. All i need to do is fill in my new column with new guids. any ideas?
Thanks in advance,
Greetings:I have a SQL 2000 database, in which about 1% of the records are inlower case. I need to make them UPPER CASE.Is there a function to determine and change the case of existingrecords, or will I have to re-write the records manually?Thanks,DW
View 6 Replies View RelatedDear All,I am Using MS SQL EXPRESS SERVER .I have installed all tools available to Express Edition site. Now I have created my database on this .I have imported a table from my MS ACCESS database (Using ODBC Datasource).This table contains 10,000 records ,Now I want to append 1 more access Table(5500 records) to the existing table having same fields.How to do this.Can any body tell me? Thanks and Regardsmukesh
View 4 Replies View RelatedHello. I currently have a website that allows appointments to be booked up for doctors. i currently have an insert record page built using ASP components. I would like to introduce some validation so that if a user tries to book an appointment date and time that is already occupied, an error message is returned saying that appointment slot is already booked. I'm quite confused how to do this. My current code looks as follows.
<%@ Page Language="C#" MasterPageFile="~/AdministratorMasterPage.master" AutoEventWireup="true" CodeFile="AddAppointment.aspx.cs" Inherits="AddAppointment" Title="Add Appointments - Bournemouth and Poole NHS Primary Care Trust" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<table style="position: relative">
<tr>
<td style="width: 45px">
<br />
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:SqlDataSource ID="AppointmentsSqlDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:ProgConnectionString %>"
DeleteCommand="DELETE FROM [Appointment] WHERE [PatientNo] = @PatientNo" InsertCommand="INSERT INTO [Appointment] ([PatientNo], [PatientSurname], [PatientForename], [ConsultantName], [HospitalName], [Time], [Date], [AppointmentStatus]) VALUES (@PatientNo, @PatientSurname, @PatientForename, @ConsultantName, @HospitalName, @Time, @Date, @AppointmentStatus)"
SelectCommand="SELECT * FROM [Appointment]" UpdateCommand="UPDATE [Appointment] SET [ConsultantName] = @ConsultantName, [HospitalName] = @HospitalName, [Time] = @Time, [Date] = @Date, [AppointmentStatus] = @AppointmentStatus WHERE [PatientNo] = @PatientNo">
<DeleteParameters>
<asp:Parameter Name="PatientNo" Type="Int32" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="ConsultantName" Type="String" />
<asp:Parameter Name="HospitalName" Type="String" />
<asp:Parameter Name="Time" Type="DateTime" />
<asp:Parameter Name="Date" Type="DateTime" />
<asp:Parameter Name="PatientNo" Type="Int32" />
<asp:Parameter Name="AppointmentStatus" Type="String" />
</UpdateParameters>
<InsertParameters>
<asp:ControlParameter ControlID="Textbox1" Name="PatientNo" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="Textbox3" Name="PatientSurname" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="Textbox4" Name="PatientForename" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="DropDownList1" Name="ConsultantName" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="DropDownList2" Name="HospitalName" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="DropDownList3" Name="Time" PropertyName="Text" Type="DateTime" />
<asp:ControlParameter ControlID="Textbox2" Name="Date" PropertyName="Text" Type="DateTime" />
<asp:ControlParameter ControlID="DropDownList4" Name="AppointmentStatus" PropertyName="Text" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td align="left" style="width: 136px">
<asp:Label ID="Label1" runat="server" Style="position: relative" Text="Patient No"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:TextBox ID="TextBox1" runat="server" Style="position: relative"></asp:TextBox></td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
Display="Dynamic" ErrorMessage="RequiredFieldValidator" Style="position: relative"
Width="148px">Enter a Patient No</asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td align="left" style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<br />
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td align="left" style="width: 136px">
<asp:Label ID="Label6" runat="server" Style="position: relative" Text="Patient Surname"
Width="116px"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:TextBox ID="TextBox3" runat="server" Style="position: relative"></asp:TextBox></td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator6" runat="server" ControlToValidate="TextBox3"
ErrorMessage="Enter a Surname" Style="position: relative" Width="140px"></asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td align="left" style="width: 136px">
<br />
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td align="left" style="width: 136px">
<asp:Label ID="Label7" runat="server" Style="position: relative" Text="Patient Forename"
Width="128px"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:TextBox ID="TextBox4" runat="server" Style="position: relative"></asp:TextBox></td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator7" runat="server" ControlToValidate="TextBox4"
ErrorMessage="Enter a Forename" Style="position: relative"></asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td align="left" style="width: 136px">
<br />
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
<asp:Label ID="Label2" runat="server" Style="position: relative" Text="Consultant Name"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
DataTextField="UserName" DataValueField="UserName" Style="position: relative">
<asp:ListItem Selected="True">Select...</asp:ListItem>
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ASPNETDBConnectionString %>"
SelectCommand="SELECT aspnet_Users.UserName FROM aspnet_UsersInRoles INNER JOIN aspnet_Users ON aspnet_UsersInRoles.UserId = aspnet_Users.UserId INNER JOIN aspnet_Roles ON aspnet_UsersInRoles.RoleId = aspnet_Roles.RoleId WHERE (aspnet_Roles.RoleName = 'Consultant')"></asp:SqlDataSource>
</td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ControlToValidate="DropDownList1"
ErrorMessage="RequiredFieldValidator" Style="position: relative" Width="152px">Select a Consultant</asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<br />
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
<asp:Label ID="Label3" runat="server" Style="position: relative" Text="Hospital Name"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:DropDownList ID="DropDownList2" runat="server" DataSourceID="SqlDataSource2"
DataTextField="HospitalName" DataValueField="HospitalName" Style="position: relative">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ProgConnectionString %>"
SelectCommand="SELECT [HospitalName] FROM [Hospital]"></asp:SqlDataSource>
</td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="DropDownList2"
ErrorMessage="RequiredFieldValidator" Style="position: relative" Width="136px">Select a Hospital</asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<br />
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
<asp:Label ID="Label4" runat="server" Style="position: relative" Text="Appointment Date"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:Calendar ID="Calendar1" runat="server" Font-Size="Smaller" Style="position: relative" OnSelectionChanged="Calendar1_SelectionChanged" OnDayRender="Calendar1_DayRender">
</asp:Calendar>
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:TextBox ID="TextBox2" runat="server" Style="position: relative; left: 0px; top: 8px;" Width="256px"></asp:TextBox><br />
</td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="TextBox2"
Display="Dynamic" ErrorMessage="Enter a Date" Style="position: relative"></asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px; height: 26px">
</td>
<td style="width: 136px; height: 26px">
<asp:Label ID="Label5" runat="server" Style="position: relative" Text="Appointment Time" Width="132px"></asp:Label></td>
<td style="width: 47px; height: 26px">
</td>
<td style="width: 100px; height: 26px">
<asp:DropDownList ID="DropDownList3" runat="server" Style="position: relative; left: 0px; top: 0px;">
<asp:ListItem>Select...</asp:ListItem>
<asp:ListItem Value="09:00">09:00</asp:ListItem>
<asp:ListItem>09:30</asp:ListItem>
<asp:ListItem>10:00</asp:ListItem>
<asp:ListItem>10:30</asp:ListItem>
<asp:ListItem>11:00</asp:ListItem>
<asp:ListItem>11:30</asp:ListItem>
</asp:DropDownList></td>
<td style="width: 100px; height: 26px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="DropDownList3"
Display="Dynamic" ErrorMessage="Select a Time" Style="position: relative"></asp:RequiredFieldValidator></td>
<td style="width: 100px; height: 26px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
<br />
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
<asp:Label ID="Label8" runat="server" Style="position: relative" Text="Appointment Status"
Width="136px"></asp:Label></td>
<td style="width: 47px">
</td>
<td style="width: 100px">
<asp:DropDownList ID="DropDownList4" runat="server" Style="position: relative">
<asp:ListItem>Select...</asp:ListItem>
<asp:ListItem>Booked</asp:ListItem>
<asp:ListItem>Modified</asp:ListItem>
<asp:ListItem>Patient Notified</asp:ListItem>
</asp:DropDownList></td>
<td style="width: 100px">
<asp:RequiredFieldValidator ID="RequiredFieldValidator8" runat="server" ErrorMessage="Select a Status"
Style="position: relative" Width="120px" ControlToValidate="DropDownList4"></asp:RequiredFieldValidator></td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 45px">
</td>
<td style="width: 136px">
</td>
<td style="width: 47px">
</td>
<td align="center" style="width: 100px">
<asp:Button ID="Button1" runat="server" Style="position: relative" Text="Submit" OnClick="Button1_Click1" /></td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr></table>
</asp:Content>
Any help would be very much appreciated.
Thanks,
James.
Hi i am getting a weekly transaction file which has two columns trans code and trans date to indicate whether the record is changed, added or modified . and the monthly master file contains blank in these two fields.
How do i update the row coming from the transaction file in the tables which contain the rows from the master file .
to better explain the example is
Master File
ID Name AGE Salary Transcode TransDate
2 dev 27 2777
Transaction File indicating change
ID Name AGE Salary Transcode TransDate
2 dev 27 24444 C 08072007
the ouput should be
2 dev 27 24444 C 08072007
replacing the existing row in the table(updating the whole row)
i have 50 columns in my table and based on the two fields i should replace the rows exisiting in table and if ID doesnot match exist just add them as a new row.
what transformation should i use .... to replace all the columns which have matching ID in table to the current record from trans file and if there doesnt exist matching id just add them as new row.
Thanks...
Hi !!
We are doing a project where we have a table with 800,000 records. We need to implement a search on this 800,000 records. How do we do that?
Assue State = NJ
Criteria: Select County, Select City, Enter Zip Code, First Name and Last Name
This should bring up Information about the person.
How can we implement it efficiently ?
Thanks
Hello I am trying to create a stored procedure where the users can either type in the last name, or a wild card in order to get the values they are looking for. Sometimes they are not sure how to spell the last name and they will type in the first 2 letters or an * for all to see if they can find it that way. How can I do this??
Here is what I have so far
Code Block
ALTER PROCEDURE [dbo].[AdvSearchRevocations]
(@Enter_LastName nvarchar(25))
AS
SET @Enter_LastName = REPLACE(@Enter_Lastname, '*', '%')
SELECT LastName, FirstName, ReasonOfRevocation, TM#, [I/R #], Date
FROM dbo.Revocations_Tbl
I have to create a search textbox where if i key in the word "dog",it will search against a field called "Name" in a table.Then it will return all records where the text/data in the "Name" field contains the word "dog".For example,it will return the records where the text/data in the "Name" field has words such as "hotdog","doggie","dog barking","big dog" etc etc.
Can i use simple SQL for this or do i need to configure the full text search service on SQL server 2000 and use the FREETEXT predicate?Thank you in advance for any replies.
Just like Unique/Distinct command, is these some way I could list just the duplicate records from a table . The field is numeric.
Thanks a lot for you help.
I'm just learning to join tables and I'm trying to construct a query to tell me the following:
Table names and related columns:
Table1.HdrSys
Table2.HdrSysNum and HdrSys
Table3.HdrSysNum
Table3 contains the detail info for Table2. Table1 is the header table for Table2. So.. If I want all records in Table3 that don't have a related record in Table1, is this even possible?
I started with:
select * from Table3 a
join Table2 b on a.HdrSysNum = b.HdrSysNum
join Table1 c on b.HdrSys= c.HdrSys
-- Now.. how do I qualify the statement.. or can I with just this. Thx! Hope I wasn't too confusing.. because I tend to get that way when I'm confused!
Hey folks...So I have a table that looks like this:CREATE TABLE [tblStation] ([CAMPAIGN] [varchar] (8),[LISTNUM] [varchar] (10),[PHONE] [varchar] (10),[EVENTTIME] [datetime] ,[STATION] [int],[OPERATOR] [varchar] (16),[EVENTCODE] [varchar],[CALLSPAN] [decimal](18, 0),[FDISP] [int],[RECORDNUM] [varchar],[STC] [varchar],[PROMOC] [varchar],[EXP_CAMP] [varchar],[PROMO3] [varchar],[MAXATT] [char],[LISTNAME] [varchar],[SITENAME] [char],[Row_id] [int] IDENTITYIt's taking nine seconds to run the following command:SELECT count([fdisp])FROM [TrunkFiles_new].[dbo].[tblStation] WITH (NOLOCK)WHERE fdisp IS NULLAnyone familiar with a table of this size having performance likethis? The [fdisp] column has a non clustered index on it.Thanks in advance...
View 1 Replies View Relatedhaving some issues trying to create a query in excel 2013. I can get the data I want from sql, but I get individual transactions and I want to sum them by plu number. here is my query, I tried using group by but every time I add the field, I get an error that some other field is invalid because it's not contained in an aggregate or group by clause. btw, I didn't name these fields.
SELECT RPT_ITM_D.F254 as [Date], RPT_ITM_D.F01 As [PLU], RPT_ITM_D.F64 As [Qty Sold], RPT_ITM_D.F65 As [SOLD], OBJ_TAB.F17 As [RCode], OBJ_TAB.F29 As [Description], PRICE_TAB.F30 As [EL Price], PRICE_TAB.F31 As [Qty]
FROM STORESQL.dbo.OBJ_TAB OBJ_TAB, STORESQL.dbo.PRICE_TAB PRICE_TAB, STORESQL.dbo.RPT_ITM_D RPT_ITM_D
WHERE OBJ_TAB.F01 = RPT_ITM_D.F01 AND OBJ_TAB.F01 = PRICE_TAB.F01 AND PRICE_TAB.F01 = RPT_ITM_D.F01 AND ((RPT_ITM_D.F254>=? And RPT_ITM_D.F254<=? )AND (OBJ_TAB.F17=25))
Hi when i am using OLDB Command for Update Existing Records the Follwing ERror Code I am getting . Any one pls help me on this one.
1)[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Command 1" (9282)
failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method.
The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
2)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
3)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
Hi all,For now I can use this code to display all the records that begins with a Letter:(WHERE SONG_TITLE LIKE @SONG_TITLE + '%') Now how do I search for records that begins with a number (from 0-9), as an add-on to the above query?Thank you very much,Kenny.
View 6 Replies View RelatedHi,
I have a table full of items which can be searched.
I also have another table with the ID of each item and columns for no of times details shown, no of times saved etc.
What I would like to do is increment a value in this second table for each item every time it is returned in a search.
What would be the best way to do this?
(Im using a Stored Procedure)
Thanks in advance,
Pete
I have a form with a dropdown or combo box, the user can select <All>or pick a user name. If they pick a user name my where clause worksfine, buts what's the best way to write "Select All" if they choosethe <All>This is what I have so far, but I don't think I should be using theLIKE operator.WHERE tblCase.qarep LIKE CASE @myqarep WHEN '<All>' THEN '%' ELSE@myqarep ENDand tblOffice.officecode LIKE CASE @myoffice WHEN -1 THEN '%' ELSE@myoffice ENDthanks for your help!!
View 4 Replies View RelatedHello all,
I am making a query which will select those records from table where a column data ends with a particular extension,i.e.
I want the query to fetch the rocords where FileName(column name) ends with .JPEG or .GIF or .BMP.
I have five records in table and FileName(columns name) contains three .JPEG ,one .GIF & one .BMP files name.
How can i get for a particular extension?
Thanks in advance
I'm trying to figure out why I am not getting any result set back from a search that includes non-alphanumeric
or non-printable characters. For instance, if I have a table with a 20 character name column with names with
beginning ranges from A-Z, why doesn't the following return any rows:
select * from table where name < CHAR(126).
In the ASCII character set, 126 is a tilde (~) which is numerically above the alphanumeric ranges 1-9,a-z, and
A-Z. Shouldn't all records that sort lower in the character range be included in the result set ?
I'm assuming this has something to do with the default collation sequence being used which somehow does
not include characters outside the alphanumeric range. Any ideas ?
Hi
I have a new client with an existing system that has just over 2 million business listings in one table. Each business listing is associated with one business category.
* Company Table (around 20 fields):
companyID
companyName
categoryID
state
postCode
etc.
* Category Table (5 fields)
categoryID
categoryName
etc.
We are using MSSQL 2005 Express Edition with Advanced Services
A free text search needs to be performed on the companyName and categoryName limited by region (state and or postcode).
1) What kind of response times should I expect for the free text search (I have not used the free text search before)
2) How should I index the companyName and categoryName so they are both used in a joined query? i.e. Do I just configure the free text search index on each field separately and it should work?
Any suggestions appreciated.
Best Regards
Kevan
I have one table with 300,000 records and 30 columns.For example columns are ID, COMPANY, PhONE, NOTES ...ID - nvarchar lenth-9COMPANY - nvarchar lenth-30NOTES - nvarchar length-250Select * from databasewhere NOTES like '%something%'Is there a way to get results from this query in less then 1-2 secondand how?
View 7 Replies View RelatedHi everyone,My company has a website, use ms sql server. One table has more than 1000000 records. When users search data from this table(such as search records which contain the word "school" in NewsTile field.And the server often occurred deadlock error.How can I improve it?Thanks.P.S. The table has these fields:NewsIDNewsTitleNewsContentNewsClickTimesNewsInsertTime
View 14 Replies View RelatedI'm trying to do some analysis on duplicate records based off of several match keys. I have a data set of approximately 30,000 people and the goal is to determine how many duplicate matches are in the system.
How would I write an SQL statement that looks for the following pieces of information. (I'm not using one person as an example; I need to do an analysis on the entire data set)
First name (exact match)
Last name (exact match)
Address line 1 (exact match)
Postal code/zip (exact match)
First Initial (exact match)
Last name (exact match)
DOB exact match
Postal code/zip (exact match)
I'm just wonder if this is a bug in MS Search or am I doing something wrong.
I have a query below
declare @search_clause varchar(255)
set @Search_Clause = ' "hepatitis b" and "hepatocellular carcinoma"'
select * from results
where contains(finding,@search_clause)
I don't get the correct result at all.
If I change my search_clause to "hepatitis" and "hepatocellular carcinoma -- without the "b"
then i get the correct result.
It seems MS Search doesn't like the phrase contain one letter or some sort or is it a know bug?
Anyone know?
Thanks