Hello, I am retriving records on a page, I am able to make changes cuase the data is displayed in textboxes, my question is how to save the changes I made in the database. Also in my below code for retriving the data what statement do I need to add so that I can use a QuerryString to filter the results. ex (default.aspx?CID=1) and only records that match that would display. Here is my code: for retriving data Private Sub displayrecord()SqlConnection1.Open() Dim SqlDataAdapter1 As New SqlDataAdapter("SELECT * FROM table1", SqlConnection1) Dim objReader As SqlDataReader Dim SqlCommand1 As New SqlCommand("SELECT * FROM table1", SqlConnection1) SqlDataAdapter1.Fill(dsMember) objReader = SqlCommand1.ExecuteReader() objReader.Read() txtbox_confirmpass.Text = objReader("MemberPassword") txtbox_name.Text = objReader("MemberName") txtbox_birthdate.Text = objReader("MemberDOB") txtbox_email.Text = objReader("MemberEmail") Dropdown_Gender.SelectedValue = objReader("Gender") objReader.Close() SqlConnection1.Close() End Sub Private Sub btnUpdate_Click
insert into test values (1, '11', 0, 'a') insert into test values (2, '111', 1, 'b') insert into test values (3, '1111', 2, 'c') insert into test values (4, '11111', 3, 'd')
---- result query
;WITH SInfo AS ( SELECTsId ,scode ,ParentId ,sName ,CONVERT(nvarchar(800), scode) AS Hierarchy
I have a report with 5 filters which can be applied to it. The records are grouped by the Rotation programme there are on, with a subtotal for each unique programme name.
The report seems to work fine, but upon closer inspection - we noticed that 2 of the records are not being displayed. As a result, the total count is out by 2.
We tracked down the missing records so I ran the SQL query with a Where clause, and it was able to find the two records.
What could possibly cause this behaviour? Please see included SQL statement :
Code Block
SELECT Posts.PostNumber,COUNT(Posts.PostNumber) AS RPCount, Incumbents.Name AS IncumbentName, Grades.GradeTitle, Specialties.SpecialtyTitle, Hospitals.Name AS Hospital, Genders.Gender, [Incumbent History].YearGraduated, COUNT([University Origins].Origin) AS OriginCount, Incumbents.Nationality AS NationalityID, Countries.[Country Name] AS Nationality, [Rotation Programmes].[Programme Name], Posts.[Post Approved for Training], [University Origins].Origin, Posts.OldPostNumber, [Rotation Programmes].[Programme ID] FROM Posts INNER JOIN Incumbents ON Posts.PostNumber = Incumbents.PostNumber INNER JOIN [Incumbent History] ON Incumbents.[Incumbent ID] = [Incumbent History].IncumbentID INNER JOIN Grades ON Incumbents.[Official Grade] = Grades.GradeID INNER JOIN Specialties ON Posts.Specialty = Specialties.SpecialtyID INNER JOIN Hospitals ON Posts.HospitalID = Hospitals.[Hospital ID] INNER JOIN Genders ON Incumbents.GenderID = Genders.GenderID INNER JOIN Countries ON Incumbents.[Country Of Birth] = Countries.[Country ID] INNER JOIN [Rotation Programmes] ON Posts.[Rotation Programme] = [Rotation Programmes].[Programme ID] INNER JOIN [University Origins] ON [University Origins].[Uni Origin ID] = Incumbents.[University Origin]
GROUP BY [Rotation Programmes].[Programme Name], Posts.PostNumber, Incumbents.Name, Grades.GradeTitle, Hospitals.Name, Genders.Gender, [Incumbent History].YearGraduated, [University Origins].Origin, Incumbents.Nationality, Countries.[Country Name], [University Origins].Origin, Posts.[Post Approved for Training], Posts.OldPostNumber, Specialties.SpecialtyTitle, [Rotation Programmes].[Programme ID]
Hi all, I have a data of applicants. Everyday we dump this data into SQL server. Now I need to generate reports everyday so that we can track how many records get updated everyday. Now the thing is that the applicants are in various stages. So my reports need to track the how many applicants changed from stage "abc" to "pqr" and how many changed from "pqr" to "xyz". Now it is not necessary that all the records change stages everyday.
I have to search the records after the records populated.
I mean to say, i have displayed records in report, if i enter some strings in the textbox and clicked find, then it will highlight the particular records, instead of highlighting the values, is it possible to display only those particular records.
For example, say i have 50 records in a page,i entered some strings in the textbox and clicked find, then it will highlight the particular 5 records one by one which match the criteria i have entered in the texbox, instead of that i have to display only those 5 records.
Hi !! We are doing a project where we have a table with 800,000 records. We need to implement a search on this 800,000 records. How do we do that? Assue State = NJ Criteria: Select County, Select City, Enter Zip Code, First Name and Last Name This should bring up Information about the person. How can we implement it efficiently ? Thanks
Hello I am trying to create a stored procedure where the users can either type in the last name, or a wild card in order to get the values they are looking for. Sometimes they are not sure how to spell the last name and they will type in the first 2 letters or an * for all to see if they can find it that way. How can I do this??
Here is what I have so far
Code Block ALTER PROCEDURE [dbo].[AdvSearchRevocations] (@Enter_LastName nvarchar(25)) AS SET @Enter_LastName = REPLACE(@Enter_Lastname, '*', '%') SELECT LastName, FirstName, ReasonOfRevocation, TM#, [I/R #], Date FROM dbo.Revocations_Tbl
I have to create a search textbox where if i key in the word "dog",it will search against a field called "Name" in a table.Then it will return all records where the text/data in the "Name" field contains the word "dog".For example,it will return the records where the text/data in the "Name" field has words such as "hotdog","doggie","dog barking","big dog" etc etc.
Can i use simple SQL for this or do i need to configure the full text search service on SQL server 2000 and use the FREETEXT predicate?Thank you in advance for any replies.
Just like Unique/Distinct command, is these some way I could list just the duplicate records from a table . The field is numeric. Thanks a lot for you help.
I'm just learning to join tables and I'm trying to construct a query to tell me the following:
Table names and related columns: Table1.HdrSys Table2.HdrSysNum and HdrSys Table3.HdrSysNum
Table3 contains the detail info for Table2. Table1 is the header table for Table2. So.. If I want all records in Table3 that don't have a related record in Table1, is this even possible?
I started with: select * from Table3 a join Table2 b on a.HdrSysNum = b.HdrSysNum join Table1 c on b.HdrSys= c.HdrSys -- Now.. how do I qualify the statement.. or can I with just this. Thx! Hope I wasn't too confusing.. because I tend to get that way when I'm confused!
Hey folks...So I have a table that looks like this:CREATE TABLE [tblStation] ([CAMPAIGN] [varchar] (8),[LISTNUM] [varchar] (10),[PHONE] [varchar] (10),[EVENTTIME] [datetime] ,[STATION] [int],[OPERATOR] [varchar] (16),[EVENTCODE] [varchar],[CALLSPAN] [decimal](18, 0),[FDISP] [int],[RECORDNUM] [varchar],[STC] [varchar],[PROMOC] [varchar],[EXP_CAMP] [varchar],[PROMO3] [varchar],[MAXATT] [char],[LISTNAME] [varchar],[SITENAME] [char],[Row_id] [int] IDENTITYIt's taking nine seconds to run the following command:SELECT count([fdisp])FROM [TrunkFiles_new].[dbo].[tblStation] WITH (NOLOCK)WHERE fdisp IS NULLAnyone familiar with a table of this size having performance likethis? The [fdisp] column has a non clustered index on it.Thanks in advance...
having some issues trying to create a query in excel 2013. I can get the data I want from sql, but I get individual transactions and I want to sum them by plu number. here is my query, I tried using group by but every time I add the field, I get an error that some other field is invalid because it's not contained in an aggregate or group by clause. btw, I didn't name these fields.
SELECT RPT_ITM_D.F254 as [Date], RPT_ITM_D.F01 As [PLU], RPT_ITM_D.F64 As [Qty Sold], RPT_ITM_D.F65 As [SOLD], OBJ_TAB.F17 As [RCode], OBJ_TAB.F29 As [Description], PRICE_TAB.F30 As [EL Price], PRICE_TAB.F31 As [Qty] FROM STORESQL.dbo.OBJ_TAB OBJ_TAB, STORESQL.dbo.PRICE_TAB PRICE_TAB, STORESQL.dbo.RPT_ITM_D RPT_ITM_D WHERE OBJ_TAB.F01 = RPT_ITM_D.F01 AND OBJ_TAB.F01 = PRICE_TAB.F01 AND PRICE_TAB.F01 = RPT_ITM_D.F01 AND ((RPT_ITM_D.F254>=? And RPT_ITM_D.F254<=? )AND (OBJ_TAB.F17=25))
Hi all,For now I can use this code to display all the records that begins with a Letter:(WHERE SONG_TITLE LIKE @SONG_TITLE + '%') Now how do I search for records that begins with a number (from 0-9), as an add-on to the above query?Thank you very much,Kenny.
I have a form with a dropdown or combo box, the user can select <All>or pick a user name. If they pick a user name my where clause worksfine, buts what's the best way to write "Select All" if they choosethe <All>This is what I have so far, but I don't think I should be using theLIKE operator.WHERE tblCase.qarep LIKE CASE @myqarep WHEN '<All>' THEN '%' ELSE@myqarep ENDand tblOffice.officecode LIKE CASE @myoffice WHEN -1 THEN '%' ELSE@myoffice ENDthanks for your help!!
Hello all, I am making a query which will select those records from table where a column data ends with a particular extension,i.e. I want the query to fetch the rocords where FileName(column name) ends with .JPEG or .GIF or .BMP. I have five records in table and FileName(columns name) contains three .JPEG ,one .GIF & one .BMP files name. How can i get for a particular extension? Thanks in advance
I'm trying to figure out why I am not getting any result set back from a search that includes non-alphanumeric or non-printable characters. For instance, if I have a table with a 20 character name column with names with beginning ranges from A-Z, why doesn't the following return any rows: select * from table where name < CHAR(126). In the ASCII character set, 126 is a tilde (~) which is numerically above the alphanumeric ranges 1-9,a-z, and A-Z. Shouldn't all records that sort lower in the character range be included in the result set ?
I'm assuming this has something to do with the default collation sequence being used which somehow does not include characters outside the alphanumeric range. Any ideas ?
I have a new client with an existing system that has just over 2 million business listings in one table. Each business listing is associated with one business category.
* Company Table (around 20 fields):
companyID companyName categoryID state postCode etc.
* Category Table (5 fields)
categoryID categoryName etc.
We are using MSSQL 2005 Express Edition with Advanced Services
A free text search needs to be performed on the companyName and categoryName limited by region (state and or postcode).
1) What kind of response times should I expect for the free text search (I have not used the free text search before)
2) How should I index the companyName and categoryName so they are both used in a joined query? i.e. Do I just configure the free text search index on each field separately and it should work?
I have one table with 300,000 records and 30 columns.For example columns are ID, COMPANY, PhONE, NOTES ...ID - nvarchar lenth-9COMPANY - nvarchar lenth-30NOTES - nvarchar length-250Select * from databasewhere NOTES like '%something%'Is there a way to get results from this query in less then 1-2 secondand how?
Hi everyone,My company has a website, use ms sql server. One table has more than 1000000 records. When users search data from this table(such as search records which contain the word "school" in NewsTile field.And the server often occurred deadlock error.How can I improve it?Thanks.P.S. The table has these fields:NewsIDNewsTitleNewsContentNewsClickTimesNewsInsertTime
I'm trying to do some analysis on duplicate records based off of several match keys. I have a data set of approximately 30,000 people and the goal is to determine how many duplicate matches are in the system.
How would I write an SQL statement that looks for the following pieces of information. (I'm not using one person as an example; I need to do an analysis on the entire data set)
First name (exact match) Last name (exact match) Address line 1 (exact match) Postal code/zip (exact match)
First Initial (exact match) Last name (exact match) DOB exact match Postal code/zip (exact match)
which is correct but how do you SUM the COUNT field? In other words, I want the total number of duplicate records in the table. Is there another way alltogether?
I tried:
SELECT LoanNo, SUM(COUNT(LoanNo)) FROM DedupTest031504 GROUP BY LoanNo HAVING COUNT(LoanNo) > 1;
but I get a "CANNOT HAVE AGGREGATE FUNCTION IN 'SUM(COUNT(LoanNo))' error.
I am creating an a stored procedure which could insert new records, the identity of the primary key in my table is not incremented. i want to increment the id when adding a new record in the stored procedure. what would be the system for that?
some time back i had problem with sending the service broker messages on remote machine,
I had some security issues and they were resolved by the help of Remusu.
since the ip of the remote machine was changed in between so i just re-executed the same scrips which used to successfully send messages on the remote machine.(I just updated the IP in the route )
To my surprise same script did not work now where as no change have been made.
I am doing the following:
1.Created the certificate and end point on the sender side. back up the certificate in a file and copied to the other machine. same step was repeated for receiving side as well.
2.both the side i created the certificates using the back up files from other sidend proper authorization
3.Then I created the database,route,messagetypes,contract,queues,services etc both the side.
4. then i setup dialog security(ie.created the dialog security certificates both the sides and back up them). Later I copied these back up files to each other, create some dialog user and create certificate using authorization to these remote dialog users created.
5.I also created remote service binding on both the sides and granted send permission to the remote dialog user.
When i send the message from sender to the receiver, and run the profiler, I see that on the sending side none of the broker event gives any error.
In the recever side I get the followng Event: Broker:Message Undeliverable
This message could not be delivered because the security context could not be retrieved. Error 11229.
I m surprised that the same script was run in the same order,Why was it running before and not now.
I also checked the End points using telnet and they seem to be fine. Also the firewall was "Off" on both the machines i.e. there was no change in system state also.
I've moved the database tables from the .mdb file to Sql Svr and now I havean *intermittent* problem. When I select a record from a combo box, it willintermittently pull up the wrong record. The code that does the search isbelow. I have a column named 'ProsId' that is a unique number (identitycolumn). The error -- when it happens -- seems to only happen on higherProsId numbers. At first it appeared to me as some sort of data conversionthing, but I'm not so sure now. Here's some examples:Record selected Record actually displayed---------------- -------------------------100,000 41,85959,073 15,79457,000 11,27357,001 11,27445,000 45,000 <--- appears to return correctvalue every time. Numbers lower than this also seem to return the correctrecord every time.Private Sub cboFindProsName_AfterUpdate()' Find the record that matches the control.Dim rs As ObjectIf Len(Trim(Me.cboFindProsName.Text)) > 0 ThenSet rs = Me.Recordset.Cloners.FindFirst "[ProsId] = " & (Me![cboFindProsName])Me.Bookmark = rs.BookmarkEnd IfEnd SubMany Thanks!
I have a service broker setup between 2 remote server. The message send does get sent to the target, but I am having a problem where the end conversation message from the target is failing. I did a trace on both the target and the source server. here's what I found
On the Target Server:
on Broker: Message undeliverable --- This message could not be delivered because it is a duplicate
On the Source Server
on Broker: Message undeliverable --- This message could not be delivered because the security context could not be retrieved,
I do not understand why the message is delivered, but the end conversation message is not getting thru. On the Target transmission_queue. I have millions of messages like this
