Select Based Upon Multiple Criteria
Sep 13, 2006
Hi
I would like to get records from a table and present a result set based upon the search fields
the search fields could be any of the following: PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3,
they could enter any combination of these however if they dont enter any of the above then the search should not retrieve any thing. the table colunms are listed below and asample data set is also shown below.
Currently the only way i think it can be done is by writing multiple queries with different queries to be executed based upon the search field that have been filled? can it be done in a stored prcedure? and can it be done using non-dynamic sql?
Name, PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3, RefImage
adam, 01, 1999, 099, 3yh333, 888, 989, 999, ref1999099.jpg
Brian, 01, 2005, 029, 3yh323, 828, 929, 929, ref1929099.jpg
sid, 04, 1989, 039, 3yh343, 838, 939, 939, ref1993399.jpg
jack, 06, 1996, 069, 3yh633, 868, 969, 969, ref1669099.jpg
View 12 Replies
ADVERTISEMENT
Apr 17, 2008
Hi! I'm new to SQL and have a question...
I'm writing a script that gathers a few variables from an outside source, then queries a table and looks for a record that has the exact values of those variables. If the record is not found, a new record is added. If the record is found, nothing happens.
Basically my SELECT statement looks something like this, then is followed by an If... Else statement
SELECT * FROM TableName
WHERE LastName = varLastName
AND FirstName = varFirstName
AND Address = varAddress
If RecordSet.EOF = True Then
'Item Not Found, add new record
'code to add new record......
Else
'Item Found, do nothing
End If
RecordSet.Update
RecordSet.Close
Even when I try to delete the If.. statement and simply display the records, it comes up as blank. Is the syntax correct for my SELECT statement??
View 5 Replies
View Related
Mar 21, 2006
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
View 1 Replies
View Related
Jan 31, 2014
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Select h.worknumber, h.itemcode, h.descr, h.task_descr, h.qty, h.itemised,
h.serialnum, h.manufacturer, h.model_id, h.depot, h.date_in, h.date_approved,
h.est_complete_date, h.actual_complete_date, h.meterstart, h.meterstop,
h.custnum, h.name cust_name, h.addr1, h.addr2, h.town, h.county, h.postcode,
h.country_id, h.contact, h.sitename, h.siteaddr1, h.siteaddr2, h.sitetown,
[Code] ....
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours],
wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.
View 1 Replies
View Related
Sep 7, 2005
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS +
AUG_CURR_CREDITS + AUG_CURR_DEBITS +
SEP_CURR_CREDITS + SEP_CURR_DEBITS +
OCT_CURR_CREDITS + OCT_CURR_DEBITS +
NOV_CURR_CREDITS + NOV_CURR_DEBITS +
DEC_CURR_CREDITS + DEC_CURR_DEBITS +
JAN_CURR_CREDITS + JAN_CURR_DEBITS +
FEB_CURR_CREDITS + FEB_CURR_DEBITS +
MAR_CURR_CREDITS + MAR_CURR_DEBITS +
APR_CURR_CREDITS + APR_CURR_DEBITS +
MAY_CURR_CREDITS + MAY_CURR_DEBITS +
JUN_CURR_CREDITS + JUN_CURR_DEBITS) as CURR_AMT
I need to sum these amounts running from July to the month prior to whatever the current month is. So if it was August, it would only be
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS) as CURR_AMT
Is there a cleaner (shorter) way to iterate through the twelve months than either writing the query 12 times in an IF statement, or 12 CASE statements? This is only part of a query that joins several tables (not shown).
Any suggestions on the best way to write this would be valued.
View 2 Replies
View Related
Sep 24, 2007
Let me start with saying thanks to all of you who have helped me (I'm a SQL newbee after doing OO for the past 12+ years)
I need to do several aggregates on multiple columns, with each column having different SELECT Criteria.
Sample Data:
Dept Project Cost CostFlag Schedule ScheduleFlag
D1 D1P1 495 1 135 3
D1 D1P2 960 2 70 2
D1 D1P3 1375 3 105 2
D1 D1P4 1050 2 160 3
D1 D1P5 1890 3 40 1
D2 D2P1 650 1 155 3
D2 D2P2 890 2 125 2
D2 D2P3 1235 3 85 1
D2 D2P4 430 1 140 3
D3 D3P1 1960 3 45 1
D3 D3P2 1490 3 85 1
D3 D3P3 1025 2 135 3
D3 D3P4 615 1 100 2
D3 D3P5 270 1 70 1
D3 D3P6 815 2 155 3
I need to calculate MEAN (average), Standard Deviation, Variance, Range, Span & Median for each data column (Cost, Schedule in the test data), where each data column has different selection criteria. I have the calculations working for each column individually (e.g. funcCalcCost, funcCalcSchedule), but I need to return the calculated values as a single data set:
SELECT Dept, Project, AVG(Cost) as Cost_Mean, MAX(Cost) - MIN(Cost) as Cost_Range, .......
WHERE CostFlag = @InputParameter
GROUP BY Dept, Project
The code above works great - but only for a single column. I need to return a dataset like this:
Dept Project Cost_Mean Cost_Range
D1 D1P1 495 135
D1 D1P2 960 70
D1 D1P3 1375 105
I need to return a dataset like this:
Dept Project Cost_Mean Cost_Range Schedule_Mean Schedule_Range
D1 D1P1 495 135 100 28
D1 D1P2 960 70 42 12
D1 D1P3 1375 105 91 38
I also have working code calculate the MEDIAN (what a pain that was, thank god I found a code example to get me going on the MEDIAN)
Thanks!
View 7 Replies
View Related
Sep 2, 2014
I have a dataset where i want to select the records that matches my input values. But i only want to try macthing a field in my dataset aginst the input value, if the dataset value is not NULL.
I always submit all 4 input values.
@Tyreid, @CarId,@RegionId,@CarAgeGroup
So for the first record in the dataset i get a succesfull output if my input values matches RegionId and CarAgeGroup.
I cant figure out how to create the SQl script for this SELECT?
My dataset
TyreIdCarIdRegionIdCarAgeGroup
NULLNULL1084 2
65351084 1
5351084 1
NULL411085 NULL
120NULLNULL NULL
NULLNULL1084 2
65NULL1084 NULL
View 9 Replies
View Related
May 18, 2006
Hello:
I need assistance writing a SELECT statement. I need data from a table that matches one (or more) of multiple criteria, and I need to know which of those criteria it matched. For instance, looking at the Orders table in the Northwind database, I might want all the rows with an OrderDate after Jan 1, 1997 and all the rows with a ShippedDate after June 1, 1997. Depending on which of those criteria the row matches, it should include a field stating whether it is in the result set because of its OrderDate, or its ShippedDate. One way of doing this that I've already tried is:
SELECT 'OrderDate' AS [ChosenReason], Orders.*FROM OrdersWHERE OrderDate > '1-1-1997'UNIONSELECT 'ShippedDate' AS [ChosenReason], Orders.*FROM OrdersWHERE ShippedDate > '6-1-1997'
In my application, scanning a table with thousands of records for five sets of criteria takes a few seconds to run, which is not acceptable to my boss. Is there a better way of doing this than with the UNION operator?
Thank you
View 2 Replies
View Related
Jun 5, 2008
Hi,
I have 1 table with 5 rows. One of the rows has dateTime values. I want to know how many rows there are with a value in that column < today AND how many rows there are with a value in that column > today.
I'm not sure how to do this.
SELECT Count(*) WHERE dateColumn <= today AND dateColumn > today gives me everything.
I like to end up with a column containing the count of rows <= today
and a column with rows where date > today.
Is this possible in SQL or do I have to retrieve all rows and then loop over the resultset and check each row?
Thanks,
Marc
View 2 Replies
View Related
May 31, 2006
I have developed an ASP.NET form with 12 different fields that will allow end users the cability to query 3 tables that are relational to one another.
I was curious what is the best way to perform this in a Stored Procedure?
Can I use a UNION -- Not sure if this is the best choice
or account for evey kind of WHERE clause based off IF statements on the data that is passed through the parameters?
View 3 Replies
View Related
Apr 7, 2015
I have a table in which each record has a initial date and a final date. I would like to create I query that gives me one row for each month between the initial date and the final date. It would be something like this:
Original:
Product|price|initial_date|final_date
A|20.50|2014-08-10|2014-10-01
B|50|2015-01-15|2015-02-20
Resulting view:
A|20.5|2014-08-01
A|20.5|2014-09-01
A|20.5|2014-10-01
B|50|2015-01-01
B|50|2015-02-01
I would like to do that, because these dates correspond to the time in which the products are in possession of sellers, so I would to use this resulting query to generate a pivot chart in Excel to illustrate the value of the goods that are with our sellers in each month.
Is it possible to do it? I think I could do that direct in VBA, but I think that maybe it would be faster if I could do it directly in SQL.
By the way, I am using MS SQL Server and SQL Server Manegement Studio 2012.
View 1 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
Apr 6, 2008
Using SQL Server 2005 Express:
I'd like to know how to do a SELECT Query using the following tables:
Miles Table:
Date/Car/Miles/MilesTypeID
===============
(some date)/Ford/20/1
(some date)Ford/20/2
(some date)Chevy/30/1
(some date)Toyota/50/3
(some date)Ford/30/3
Miles Type Table
MilesTypeID/MilesType
=================
1/City
2/Highway
3/Off-Road
I'd like the results to be like this:
Date/Car/City Miles/Highway Miles/Off-Road Miles
=====================================
(date)-Ford-20-0-0
(date)-Chevy-0-20-0
(date)-Ford-20-0-0
(date)-Toyota-0-0-50
(date)-Ford-0-0-30
Anyone? Thanks in advance!
View 3 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
May 31, 2008
Hi I hope i make sense this time around, I have a page in which a customer can either add a new product and its rate as well as update an existing product. What i am trying to achieve is get the live rate of the product, when a user goes to order the product. Each existing product can be updated twice in a year either in period 1 or period 2, therefore there is a possibility that a rate hasnt been updated which means the price should be the alst updated rate. Therefore the following are the possible rates which the product can have;
dbo.tblRateSchedule.Rate - This will be the rate when a product is new and has just been added, therefore no previous rates.
dbo.tblHistoricalRateSchedule.Rate2007Period2- Most existing products are still having this rate as their latest rate.
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate - This is the rate when a rate has been updated in 2008 period 1
dbo.tblRateSchedule.RateScheduleYear2008Period2Rate - This is the rate when a rate has been updated in 2008 period 2
What i am trying to do is get the latest rate as it stands in the system, based on the above scenarios. This what I have so far, i tried to use the ISNULL, however that didnt work for probably because there are four instances. The following is the "view" which returns the rates.
Code:
SELECT dbo.tblWorkSchedule.Survey_ID, dbo.tblWorkSchedule.WorkSchedule_ID, dbo.tblWorkSchedule.WorkScheduleType_ID,
dbo.tblWorkSchedule.ScheduleStatus_ID, dbo.tblWorkSchedule.Qty, dbo.tblRateScheduleUnit.Unit, dbo.tblWorkType.Work_Type_Description,
dbo.tblRateScheduleType.Type, dbo.tblWorkSchedule.MA_Code, dbo.tblRateSchedule.SOR_Code, dbo.tblSurvey.PropertyYear_ID,
dbo.tblSurvey.PropertyPeriod_ID, ISNULL(dbo.tblWorkSchedule.Valuation, 0) AS Valuation, dbo.tblSurvey.WorkScheduleOverallStatus_ID,
dbo.tblSurvey.VariationOverallStatus_ID, dbo.tblWorkSchedule.WorkScheduleLocation_ID, dbo.tblWorkSchedule.Inserted_DateTime,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN dbo.tblRateSchedule.DESCRIPTION ELSE dbo.tblWorkSchedule.Figure_Description END AS DESCRIPTION,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN tblRateSchedule.SWT ELSE tblWorkSchedule.WorkScheduleLocation_ID END AS SWT, dbo.tblCategory.Category,
dbo.tblScheduleStatus.Schedule_Status, CASE isnull(dbo.tblWorkSchedule.Rate, 0)
WHEN 0 THEN dbo.tblRateSchedule.Rate ELSE tblWorkSchedule.Rate END AS Rate, dbo.tblRateSchedule.WorkType_ID,
dbo.tblWorkSchedule.UpliftedRate AS UPLIFTED_RATE,
CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THEN CASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID)
END WHEN 2 THEN CASE IsNull(dbo.tblSurvey.VariationOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID) END END AS UpliftedRate,
CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN CONVERT(decimal(18, 2), IsNull(dbo.tblRateSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) ELSE CONVERT(decimal(18, 2), IsNull(dbo.tblWorkSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) END AS Total, dbo.tblCompany.IsContractor, dbo.tblCompany.Percentage AS Constructor_Percentage,
dbo.tblCompany.Percentage AS Contractor_Percentage, CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) ELSE ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) END AS After_Lift, ISNULL(dbo.tblSurvey.Survey_Completed, 0)
AS Survey_Completed, LTRIM(RTRIM(dbo.tblUser.User_Title)) + ' ' + LTRIM(RTRIM(dbo.tblUser.User_Forename))
+ ' ' + LTRIM(RTRIM(dbo.tblUser.User_Surname)) AS Inserted_By, dbo.tblWorkSchedule.Inserted_By AS InsertedBy_ID,
ISNULL(dbo.tblUploadedFile.File_Name, '') AS File_Name, dbo.tblWorkSchedule.Variation_ID,
dbo.tblHistoricalRateSchedule.Rate2006Period1, dbo.tblHistoricalRateSchedule.Rate2006Period2, dbo.tblHistoricalRateSchedule.Rate2007Period1,
dbo.tblHistoricalRateSchedule.Rate2007Period2, dbo.tblHistoricalRateSchedule.Rate2008Period1,
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate, dbo.tblRateSchedule.RateScheduleYear2008Period2Rate
FROM
View 1 Replies
View Related
May 31, 2008
Hi this is my first post i am hoping its the write place. I have a page in which a customer can either add a new product and its rate as well as update an existing product. What i am trying to achieve is get the live rate of the product, when a user goes to order the product. Each existing product can be updated twice in a year either in period 1 or period 2, therefore there is a possibility that a rate hasnt been updated which means the price should be the alst updated rate. Therefore the following are the possible rates which the product can have;
dbo.tblRateSchedule.Rate - This will be the rate when a product is new and has just been added, therefore no previous rates.
dbo.tblHistoricalRateSchedule.Rate2007Period2- Most existing products are still having this rate as their latest rate.
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate - This is the rate when a rate has been updated in 2008 period 1
dbo.tblRateSchedule.RateScheduleYear2008Period2Rate - This is the rate when a rate has been updated in 2008 period 2
What i am trying to do is get the latest rate as it stands in the system, based on the above scenarios. This what I have so far, i tried to use the ISNULL, however that didnt work for probably because there are four instances. The following is the "view" which returns the rates.
SELECT dbo.tblWorkSchedule.Survey_ID, dbo.tblWorkSchedule.WorkSchedule_ID, dbo.tblWorkSchedule.WorkScheduleType_ID,
dbo.tblWorkSchedule.ScheduleStatus_ID, dbo.tblWorkSchedule.Qty, dbo.tblRateScheduleUnit.Unit, dbo.tblWorkType.Work_Type_Description,
dbo.tblRateScheduleType.Type, dbo.tblWorkSchedule.MA_Code, dbo.tblRateSchedule.SOR_Code, dbo.tblSurvey.PropertyYear_ID,
dbo.tblSurvey.PropertyPeriod_ID, ISNULL(dbo.tblWorkSchedule.Valuation, 0) AS Valuation, dbo.tblSurvey.WorkScheduleOverallStatus_ID,
dbo.tblSurvey.VariationOverallStatus_ID, dbo.tblWorkSchedule.WorkScheduleLocation_ID, dbo.tblWorkSchedule.Inserted_DateTime,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN dbo.tblRateSchedule.DESCRIPTION ELSE dbo.tblWorkSchedule.Figure_Description END AS DESCRIPTION,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN tblRateSchedule.SWT ELSE tblWorkSchedule.WorkScheduleLocation_ID END AS SWT, dbo.tblCategory.Category,
dbo.tblScheduleStatus.Schedule_Status, CASE isnull(dbo.tblWorkSchedule.Rate, 0)
WHEN 0 THEN dbo.tblRateSchedule.Rate ELSE tblWorkSchedule.Rate END AS Rate, dbo.tblRateSchedule.WorkType_ID,
dbo.tblWorkSchedule.UpliftedRate AS UPLIFTED_RATE,
CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THEN CASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID)
END WHEN 2 THEN CASE IsNull(dbo.tblSurvey.VariationOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID) END END AS UpliftedRate,
CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN CONVERT(decimal(18, 2), IsNull(dbo.tblRateSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) ELSE CONVERT(decimal(18, 2), IsNull(dbo.tblWorkSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) END AS Total, dbo.tblCompany.IsContractor, dbo.tblCompany.Percentage AS Constructor_Percentage,
dbo.tblCompany.Percentage AS Contractor_Percentage, CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) ELSE ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) END AS After_Lift, ISNULL(dbo.tblSurvey.Survey_Completed, 0)
AS Survey_Completed, LTRIM(RTRIM(dbo.tblUser.User_Title)) + ' ' + LTRIM(RTRIM(dbo.tblUser.User_Forename))
+ ' ' + LTRIM(RTRIM(dbo.tblUser.User_Surname)) AS Inserted_By, dbo.tblWorkSchedule.Inserted_By AS InsertedBy_ID,
ISNULL(dbo.tblUploadedFile.File_Name, '') AS File_Name, dbo.tblWorkSchedule.Variation_ID,
dbo.tblHistoricalRateSchedule.Rate2006Period1, dbo.tblHistoricalRateSchedule.Rate2006Period2, dbo.tblHistoricalRateSchedule.Rate2007Period1,
dbo.tblHistoricalRateSchedule.Rate2007Period2, dbo.tblHistoricalRateSchedule.Rate2008Period1,
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate, dbo.tblRateSchedule.RateScheduleYear2008Period2Rate
FROM
View 2 Replies
View Related
Sep 23, 2013
I have to produce a report, but not sure of the best way to get the required results
Aim - to count how many [FDMSAccountNo] there are per given [Month_end_date], and then do a case when on the[Retail_amount]
E.g.
10 Fdmsaccountno in Jan
Those 10 Fdmsaccountno vary in [Retail_amount]
I have 5 fdmsaccountno which are between %0 & £5
2fdmaccounno beterrn £6& £10
3 fdmsaccountno £10>
My query is
SELECT [FDMSAccountNo]
,[Month_end_date]
,[Retail_amount]
FROM [FDMS].[dbo].[Fact_Fee_History]
where [Fee_Sequence_Number] = '32r'
and Month_end_date between '2013-01-01' and '2013-12-01'
View 5 Replies
View Related
Sep 21, 2005
Currently I'm trying to add a column based on certain criteria based on the following data:
CallID GroupName CustomerPending
------ ----------- ------------
00500588FollowupN
00500588FollowupN
00500588Server N
00500588Service DeskN
00500588Service DeskN
Basically I'm trying to add an extra column, so that whenever the GroupName is "Followup", then a 'Y' will appear in the CustomerPending column for all instances of that CallID. I tried with the following, but it only provides a 'Y' in the rows (not the CallId's) where "Followup" is found.
--------------------------------------
UPDATE dbo.Asgnmnt
SET CustomerPending = 'Y'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
UPDATE dbo.Asgnmnt
SET CustomerPending = 'N'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName NOT IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
---------------------------------------
Any assistance appreciated.
View 4 Replies
View Related
Jan 2, 2007
I am trying to accomplish the following.
There are two tables. the second one is a table that contains fields based on which the exclusion logic has to be written. It has 5 fields and there may be data in all of them or only in some of them.
The first and second table have one field in common - the Account number.(ACCT_NUM)
the exclusion is based in steps..
1) if it has all the fields in the second table for that account number, then compare all of them..
2) if only 4 of them are present,compare and check for null for the rest
3) if only 3 of them are present,compare and check for null for the rest
4) if only 2 of them are present,compare and check for null for the rest.
how do i do this... pls suggest
Thanks
View 1 Replies
View Related
Jul 10, 2006
Hi,
I want to delete all files in a folder where creation date is an year older. I created a For Each Loop container to go over the whole folder and then execute the following Script Task
Dim FileArchive As Int16
Dim dteArchive As Date
Dim FilePath As String
FileArchive = CType(Dts.Variables("FileArchive").Value, Int16) ' One Year FileArchive = 365
dteArchive = DateAdd("d", -FileArchive, Now.Date)
FilePath = Dts.Variables("FilePath").Value.ToString
If File.GetCreationTime(FilePath) <= dteArchive Then
Try
File.Delete(FilePath)
Catch ex As Exception
'Do Nothing
End Try
End If
Dts.TaskResult = Dts.Results.Success
Is there a better approach to this? As most of the time job may have to delete 10 or 15 files but he has to read each file and then check the date if it matches the criteria and it delete.
View 1 Replies
View Related
May 9, 2007
***** SQL Server 2005 ********
I have a table that needs to be updated with a sequential number based on criteria.
I am trying to update the SeqID and LinkSeqID with the same sequential number if the ProductID and StoreID are in the same group. For instance the 1st three rows below are in the same group 752534 and 4, therefore the SeqID and LinkSeqID should be 1,2,3 and restart at 1 once the grouping of ProductID and StoreID changes. Please look at the examples below.
SALES Table as IS:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1
752534 4 2
752534 4 3
896784 2 4
896784 2 5
896784 4 6
898874 2 7
898968 2 8
This is what the table should look like after the update in complete.
SALES after UPDATE:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1 1 1
752534 4 2 2 2
752534 4 3 3 3
896784 2 4 1 1
896784 2 5 2 2
896784 4 6 1 1
898874 2 7 1 1
898968 2 8 1 1
Can anyone HELP me please?
View 4 Replies
View Related
Apr 17, 2014
I have a scenario where i need to get the starting and ending date time based on the crieteria. The criteria is I always have my start date as NS or GS in the data column and my end date as GX so i need NS or GS to be my strart date based on ts Ascending and my end date as GX to be displayed in the same columns .
Create Table Test
(Tsq INT IDENTITY (1,1),
Data Varchar (150),
ts datetime,
Tpkt_type int)
insert into test values ('GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2')
[code]....
Expected Output
---------Data----------------- ts as starttime--------------tpkt_type------data-----------------------ts as endtime--------tpkttype-
'GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2' 'GX,1,0000000000000000000000000','2013-11-13 09:47:37.007','4'
'GS,000020,000021,000022,000023','2013-11-13 09:50:25.987','2', 'GX,1,0000000000000000000000000','2013-11-13 09:50:40.920','4'
'GS,000020,000021,000022,000023','2013-11-13 09:51:28.330','2', 'GX,1,0000000000000000000000000','2013-11-13 09:51:43.257','4'
'NS,000020,000021,000022,000023','2013-12-17 16:51:09.063','18', 'GX,1,0000000000000000000000000','2013-12-17 16:51:15.257','4'
View 9 Replies
View Related
Apr 25, 2008
Hello,
I need to create a query that will count new cases based on the create date(create_date) and criteria for the groups(The only way to distinguish between the 2 major groups mts and bnb is area!= 'bnb" because everything else is MTS). The sample report I need to create below shows how it needs to be counted weekly, for a 4 month period, for the groups under MTS and BNB. The totals and grand totals can be achieved in the report tool. I want to create variables for the new cases (mts_newcases_sales, mts_newcases_salesd, bnb_newcases_salesd etc)
Ex. MTS sales : (status = 'Calculated' OR status = 'REJECTED') and errorsource != 'marketing' and accountns is null and area != 'BNB'(everything else is MTS)
MTS salesd ; Credit >= '1001' and (status = 'REJECTEDV' or status = 'ACCEPTEDS') and errorsource != 'marketing' and accountnr is null
BNB creditr: Credit < 101 and (status = 'SUBMITTED' OR status = 'REJECTEDS' OR status = 'REJECTEDA' OR STATUS = 'ACCEPTEDC')
12-Jan
19-Jan
26-Jan
2-Feb
9-Feb
16-Feb
MTS
New Cases Received
85
84
79
98
79
95
Sales
30
32
27
40
42
38
SalesD
47
34
37
23
23
37
CreditR
44
29
26
35
55
54
CreditB
6
12
9
5
7
13
CreditS
-
-
-
-
3
-
CreditP
10
11
11
24
17
7
MTS Subtotal
140
125
110
144
151
150
BNB
New Cases Received
12
13
14
14
6
11
Sales
-
-
-
-
-
-
SalesD
-
-
-
-
-
-
CreditR
12
11
12
10
5
9
CreditB
8
13
9
17
16
6
CreditS
-
-
2
-
-
-
CreditP
1
1
1
1
4
3
BNB Subtotal
21
25
24
28
26
19
Total
New Cases Received
97
97
93
112
85
106
Sales
30
32
27
40
42
38
SalesD
47
34
37
23
23
37
CreditR
56
40
38
45
60
63
CreditB
14
25
18
22
23
19
CreditS
-
-
2
-
3
-
CreditP
11
12
12
25
21
10
Grand Total
161
150
134
172
177
169
This is just a very brief bit of code
SELECT MTS_new_cases_sales, mts_new_cases_salesd €¦€¦.
FROM vwCreditN
WHERE mts_sales_new_cases = ( )...
and (status = 'Calculated' OR status = 'REJECTED')...
Can you please show me how to accomplish this?
Thank you in advance for your effort,
Rhonda
View 2 Replies
View Related
Oct 15, 2009
is there a way to update multiple rows in one update query in tsql? what I wanted to do is for example I got a table containing
code : desc
1 : a
2 : b
3 : c
4 : d
1 : e
3 : f
I wanted to update it to
code : desc
1 : x
2 : b
3 : y
4 : d
1 : x
3 : y
how to do it?
View 5 Replies
View Related
Mar 11, 2014
I have an SSRS Report that I created. I'd like to set up a job that will run every hour, and what the job will do is send an SSRS report to a select group of recipients when a certain criteria is met. How do I go about doing this? My SSRS knowledge is very limited.
Additional Info:I created the report with a one time schedule to a certain email address. I do see the report schedule in the reportserver DB. Because I already have the schedule and the subscription id, I think all I have to do is call that subscription, but that's where I'm lost.
View 3 Replies
View Related
Feb 11, 2015
I was tasked with witing a stored procedure to send out emails based on certain criteria. One of our developers decided to take care of the criteria in another process and pass variables for me to use. I am not quite sure how to go about this, but below is what I started with. I declared his variables, and then set up a couple of my own for the email subject line and text.
create PROCEDURE [dbo].[SendWelcomeEmails]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
[Code] ....
Do I need to use a cursor or can I just specify using if, then else? Also not sure where to SET the individual subject lines.
View 2 Replies
View Related
Feb 14, 2008
Hi,
I would like to get some advises on how creating some kind of reports with Report builder
Lets say i have these two tables with these columns
Table Product
ProductName
Table ProductInstance
Product ID
CreationDate
CompletedDate
I would like to be able to create with report builder a report that looks this
Start Date : 2008/10/01 - End Date : 2008/10/30
Total Total Total
In Out OutStanding
ProductName1 10 0 3
ProductName2 5 5 2
ProductName3 8 8 5
ProductName4 12 5 6
Total In : total number of product created between StartDate and EndDate
Total Out : Total number of product completed between Start Date and End Date
Total OutStanding : Total number of product that have not yet been completed.
Any suggestion and advise on how to achieve this ?
View 2 Replies
View Related
Feb 13, 2008
I have a report with a date type parameter. Depending on the value return by this date type parameter the dataset will return either the credit, deposit or process date. How do I go about coding it so that it will dynamically select the right column in my query for my dataset?
Sincerely appreciate all the help I can get.
Thanks in advance.
View 11 Replies
View Related
Feb 20, 2007
Hi,how do I do a simple formula, which will search a field for specialcharacters and return a value.If it finds "%" - it returns 1elseIf it finds "?" it returns 2endIf this is the incorrect newsgroups, please direct me to the correct oneregards Jorgen
View 2 Replies
View Related
Apr 30, 2015
We were asked to create an SQL function to return a unit price based on various criteria. The function works fine except for the tiered pricing (use of BillingPriceTable) calculation. What we need to do is break up the total quantity passed to the function and return the total of prices found. In our example, we passed a quantity of 9,721 units and need to return a total price of 231.92 using the table below.
Low Qty    High Qty    Fee       Actual Qty       Price
0Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7500Â Â Â Â Â Â Â 0.025Â Â Â Â Â Â Â Â Â Â Â 7500Â Â Â Â Â Â Â Â Â Â 187.50
7501Â Â Â Â Â Â Â Â Â Â Â 15000Â Â Â Â Â Â Â 0.020Â Â Â Â Â Â Â Â Â Â Â 2221Â Â Â Â Â Â Â Â Â 44.42
Below is the table definition that we have to work with (ugghh).
CREATE TABLE [dbo].[BillingPriceTable](
[PriceTableID] [int] IDENTITY(1,1) NOT NULL,
[entity] [varchar](4) NULL,
[PriceTableCode] [varchar](10) NULL,
[PriceTableName] [varchar](40) NULL,
[Code] ....
What we have so far is shown below. The columns that start with bdxx are the "High Qty" values and the columns that start with prxx are the price for that quantity range. So, the current SELECT is shown below and it returns the price based on the entire qty of 9,721 and returns a unit price of 0.020 and should return 0.023857628
The current SELECT is shown below and is returning 0.020 which is the fee for the total rather than calculating the fee twice, once for the 0-7500 and again for the 7501-15000 (actually 7501-9721). Two things came to mind, one was a WHILE loop and the other was possibly a ranking function of some sort.Â
ALTER FUNCTION [dbo].[fn_GetPrice]
(
@plincdvarchar(3),
@pgrpcodevarchar(4),
@pitmcodevarchar(4),
@qtydecimal(10,1) = 1,
@corpnbrvarchar(9)
)
[Code] ....
View 9 Replies
View Related
Mar 17, 2015
use of Row_Number() over ( partition... but I dont understand how.
Imagine I have a table like
CustomerID, PartNum, QtyinOrder, shipped
1 6 3 0
1 6 2 0
2 6 1 0
2 5 1 0
2 5 2 0
2 5 3 0
2 5 4 1
1 6 4 1
2 6 2 1
But I wanted to return
CustomerID, PartNum, MaxQtyOrderedNotShipped
That would be just the rows
1 6 3 0
2 6 1 0
2 5 3 0
If I use this:
Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1
there is no restriction, so I get the shipped...If I alter the where clause to work only on not shipped, I get no records...as below
Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1 and shipped=0
View 2 Replies
View Related
Sep 10, 2007
I am creating a .aspx page that links with Miscrosoft SQL Server 2005 Express. It includes a GridView control that displays all the table data on the page. You can then select a record from the control (currently by clicking an image button to the left of each record- is there any way of selecting the record by clicking anywhere on the row? How would that be done?) and it displays the data in a detailsview control below where the data can be changed etc.
The data is like a phonebook (Name, Telephone number, and some other misc fields) and the user should be able to search by either name or number to filter out the records shown in the gridview control. I have two textboxes for this, and I started with the name text box and it works fine. i.e. with one filterparameter and one filterexpression. So that if you just enter 'Da' it filters out the records displaying only those whose name starts with 'Da'.
I have experimented but have found no way of including filter expressions to use the number as a search. I added the second filter parameter (under sqldatasource control so that:
<FilterParameters>
<asp:ControlParameter Name="DestinationName" ControlID="txtName" /><asp:ControlParameter Name="DestinationNumber" ControlID="txtNumber" />
</FilterParameters>
But I don't know what to do for the FilterExpressions. currently I just have:
FilterExpression="DestinationName LIKE '{0}%'"
i have tried using "DestinationName LIKE '{0}%' OR DestinationNumber LIKE '{0}%'" but it requires that both text boxes have data entered.
What I want is something that allows the user to enter either a name or number or both (all or part of so don't need to enter in full name/number) and it filters out the records accordingly. I.e. if you enterd 'Dav' and '079' it would bring back all the records who had a name starting with Dav and a number starting with 079. However if you enterd just 079 then it should just bring back all records with numbers starting 079 whatever their associated name.
Thanks
View 9 Replies
View Related
Aug 27, 2004
I have a table with a record that looks like the attached TXT.
I need to keep the most recently entered value where flag_out = 1 and delete those duplicate
records, and this should only apply to records where there's also an flag_in value of 1.
I've tried a bunch of delete statements without avail....
TIA
View 3 Replies
View Related
