Hi,
how do I do a simple formula, which will search a field for special
characters and return a value.
If it finds "%" - it returns 1
else
If it finds "?" it returns 2
end
If this is the incorrect newsgroups, please direct me to the correct one
regards Jorgen
We were asked to create an SQL function to return a unit price based on various criteria. The function works fine except for the tiered pricing (use of BillingPriceTable) calculation. What we need to do is break up the total quantity passed to the function and return the total of prices found. In our example, we passed a quantity of 9,721 units and need to return a total price of 231.92 using the table below.
Low Qty    High Qty    Fee       Actual Qty       Price
0Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7500Â Â Â Â Â Â Â 0.025Â Â Â Â Â Â Â Â Â Â Â 7500Â Â Â Â Â Â Â Â Â Â 187.50
7501Â Â Â Â Â Â Â Â Â Â Â 15000Â Â Â Â Â Â Â 0.020Â Â Â Â Â Â Â Â Â Â Â 2221Â Â Â Â Â Â Â Â Â 44.42
Below is the table definition that we have to work with (ugghh).
CREATE TABLE [dbo].[BillingPriceTable](
[PriceTableID] [int] IDENTITY(1,1) NOT NULL,
[entity] [varchar](4) NULL,
[PriceTableCode] [varchar](10) NULL,
[PriceTableName] [varchar](40) NULL,
[Code] ....
What we have so far is shown below. The columns that start with bdxx are the "High Qty" values and the columns that start with prxx are the price for that quantity range. So, the current SELECT is shown below and it returns the price based on the entire qty of 9,721 and returns a unit price of 0.020 and should return 0.023857628
The current SELECT is shown below and is returning 0.020 which is the fee for the total rather than calculating the fee twice, once for the 0-7500 and again for the 7501-15000 (actually 7501-9721). Two things came to mind, one was a WHILE loop and the other was possibly a ranking function of some sort.Â
ALTER FUNCTION [dbo].[fn_GetPrice]
(
@plincdvarchar(3),
@pgrpcodevarchar(4),
@pitmcodevarchar(4),
@qtydecimal(10,1) = 1,
@corpnbrvarchar(9)
)
[Code] ....
Hi,
We are seeing memory issues with a simple C# based TVF that splits an input string into a table based a delimiter. Entries such as the following show up in the SQL log:
AppDomain 8 (DBName.dbo[runtime].7) is marked for unload due to memory pressure.
AppDomain 8 (DBName.dbo[runtime].7) unloaded.
These entries only show up after the TVF has been called many times (~ half million times or more).
We encountered the same memory issues with June CTP, but they appeared to be fixed in Sepetmber CTP. Somehow the issues come back for us in the SQL Server 2005 RTM version. With June CTP after these errors show up many many times, the SQL server had to be re-started.
I'd appreciate any comments/ideas regarding these error messages in the SQL log?
We are using the RTM version of SQL2005: Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Thanks,
Wenbin Zhang
I have data in a column that starts with 1-4 characters followed by a dash then followed by an number of characters (ex: EU-Surgery).
How do I select everything to the right of the dash when the number of characters to the left of the dash varies?
Our clients want to be able to do full text search with a single letter. (Is the name Newton, Nathan, Nick?, Is the ID N1, N2...). Doing a single character full text search on a table work 25 out of 26 times. The letter that doesn't work is 'n'. the WHERE clause CONTAINS(full_text_field, ' "n*" ') returns all rows, even rows that have no 'n' in them anywhere. Adding a second letter after the "n" works as expected.
Here is an example
create table TestFullTextSearch (
Id int not null,
AllText nvarchar(400)
)
create unique index test_tfts on TestFullTextSearch(Id);
create fulltext catalog ftcat_tfts;
[Code] ....
This seems really simple so I'm suprised I'm having so much trouble. Perhaps I'm just overthinking the whole issue. I'm trying to write a query that will extract a list of Users from a table that have logged in within the last 90 days. Sounds easy huh? I'm still stumped!Here's the basics of the attempted query:SELECT UserNameFROM UsersWHERE (LastLoggedInDate<= DATEPART(dd, GETDATE() - 90))Thanks!
View 1 Replies View RelatedI am very new to sql programming. I have a database with 15 columns. At this moment I do this to get all rows containing the year 2013:
WHERE DATEPART (yyyy, DownloadDate) = 2013 .
But I also want to add a criteria so that I can have all rows where DownloadDate contains 2013 AND WHERE IsRead(BIT) contains NULL. I tried this:
WHERE DATEPART(yyyy, DownloadDate) = 2013 AND IsRead = null .
But this gave me nothing!
I have four criterias in my .aspx page. They are "First Name, Last Name, Title, Year". I have a Book and an Author table. The Author table would contain all the author's information and the Book table contains all the books information such as title, publisher, subject, and so on. So here's what I'm trying to do.
I want to write a transaction statement that will query the four criterias above if the criteria textbox is not black. So for example, when the user click the submit button, all the four criteria fields are filled except Year. That means the query would search the Author and Book tables for "First Name, Last Name, Title" but not "Year" for any potential matches. I also wanted to use "Like" instead of "=" for a wider search.
Actually I'm trying to create a store procedure that will accept those four criterias and search the tables based on those criterias.
Any help is appreciated.
i am working for a Library Project. in that project i want to search Book by putting book content. in book content there could be single quatation
e.g William's. when ever i put single quatation my string type is terminated and my query is not executed successfully.
select Book_ID,Title,Auther from book_details where Contents like '%xyz%'
here xyz is my object name.
if i put William's in xyz it does not work.
plz tell me how to solve this problem.
Jasim...
New Delhi, INDIA
dear friend,
the problem i am finding is moreover a concatenation problem
what i did is that have stored procedure which is accepting any character and i have to show all the records where this character is existing
it is like this only
********************************
name1 like '% @str %'
but then it is not treating the str as a variable and treating it as a string so if you have any solution please let me know early
please give the answer with example
waiting for reply
ashish bhatnagar
I am working on SQL Server in VB 2008. I have a table 'Records' having 8 columns. I have a search page where I can choose 5 different parameters to search as 'Category' , 'Name' , 'Date' etc.
I can successfully search with a single criteria selected either Category Name Or Date. But I want to create a single SQL command that can search my 'Records' table for either two or all the parameters depending on the selections made by the user.
I am trying to set up a query that will allow the user to input a string, and the search will match ANY word in that string. Currently, I have it configured so that the search will only match the exact string that the user inputs. I have google searched for the answer, but no luck yet. Any ideas?
View 9 Replies View RelatedSay I have a query like
DECLARE @ID UNIQUEIDENTIFIER, @SOMEDATE DATE
SELECT * FROM myTable WHERE ID = @ID AND DATEFIELD=@SOMEDATE
I want to pass values to @ID and @SOMEDATE, such that it meets the WHERE criteria for all values in the respective fields.
What parameter value should I pass such that all values are selected? In the actual SP, I have uniqueidentifier, varchar and date parameters.
My selection criteria is as follows:
where content like '%EditLiveJava%'
or content like '% Sys__%' ESCAPE '_'
or content like '%<div class="row"/>%'
or content like '%<a href="" title=""%'
or content like '%cmsprod%'
or content like '%Error processing inline link%'
or content like '%see log for stack trace%'
I output the content field if the search is true but would like to also output which specific 'like' has been found.
Can I do this in the one pass or do I have to read the database separately for each condition?
I have a store procedure that search by Firstname and Lastname. I want it search by either both (Firstname and Lastname) or any of them. For example if only FirstName passes to it shows all the record with that Fistname. Currently I have to pass both Firstname and Lastname to my store proc to get the result.
This is my stor proc:
USE [CustomerPortal]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[CSA_Search_Customer_By_Name]
[Code] ....
I am trying to create a query that will show me who is phoning who in anorganisation from available Telephone Billing information. I am creating aMSAccess 2000 database with a few few tables, two of which are:TableMembers: (containg fields Refs, DateCreated, MembershipNo,OfficeLocation ...NB: Refs has a Primary Key - No Duplicates)TablePeople: (containing fields: Refs, Name, Addr, TelHome, TelWork,TelMobile & TelFax)TableTelBills: (containing fields: Refs, TelNo, DateCalled, Duration,TelType)I am trying to create a query that will use a simple searching criteria eg.,Like "*" [Enter the Tel No or part Tel No to search:] & "*"to search all the Tel fields in the TablePeople and TableTelBills (TelHome,TelWork, TelMobile, TelFax and TelNo) but am running in difficulties.I start by creating a query and adding the tables TablePeople andTableTelBills and TableMembers.I use the Refs from the Table Members as a base criteria but do not know howto create criteria that will search all Tel fields at once!I would appreciate any and all help people!Jan
View 2 Replies View RelatedI'm trying to figure out why I am not getting any result set back from a search that includes non-alphanumeric
or non-printable characters. For instance, if I have a table with a 20 character name column with names with
beginning ranges from A-Z, why doesn't the following return any rows:
select * from table where name < CHAR(126).
In the ASCII character set, 126 is a tilde (~) which is numerically above the alphanumeric ranges 1-9,a-z, and
A-Z. Shouldn't all records that sort lower in the character range be included in the result set ?
I'm assuming this has something to do with the default collation sequence being used which somehow does
not include characters outside the alphanumeric range. Any ideas ?
Hi I hope i make sense this time around, I have a page in which a customer can either add a new product and its rate as well as update an existing product. What i am trying to achieve is get the live rate of the product, when a user goes to order the product. Each existing product can be updated twice in a year either in period 1 or period 2, therefore there is a possibility that a rate hasnt been updated which means the price should be the alst updated rate. Therefore the following are the possible rates which the product can have;
dbo.tblRateSchedule.Rate - This will be the rate when a product is new and has just been added, therefore no previous rates.
dbo.tblHistoricalRateSchedule.Rate2007Period2- Most existing products are still having this rate as their latest rate.
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate - This is the rate when a rate has been updated in 2008 period 1
dbo.tblRateSchedule.RateScheduleYear2008Period2Rate - This is the rate when a rate has been updated in 2008 period 2
What i am trying to do is get the latest rate as it stands in the system, based on the above scenarios. This what I have so far, i tried to use the ISNULL, however that didnt work for probably because there are four instances. The following is the "view" which returns the rates.
Code:
SELECT dbo.tblWorkSchedule.Survey_ID, dbo.tblWorkSchedule.WorkSchedule_ID, dbo.tblWorkSchedule.WorkScheduleType_ID,
dbo.tblWorkSchedule.ScheduleStatus_ID, dbo.tblWorkSchedule.Qty, dbo.tblRateScheduleUnit.Unit, dbo.tblWorkType.Work_Type_Description,
dbo.tblRateScheduleType.Type, dbo.tblWorkSchedule.MA_Code, dbo.tblRateSchedule.SOR_Code, dbo.tblSurvey.PropertyYear_ID,
dbo.tblSurvey.PropertyPeriod_ID, ISNULL(dbo.tblWorkSchedule.Valuation, 0) AS Valuation, dbo.tblSurvey.WorkScheduleOverallStatus_ID,
dbo.tblSurvey.VariationOverallStatus_ID, dbo.tblWorkSchedule.WorkScheduleLocation_ID, dbo.tblWorkSchedule.Inserted_DateTime,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN dbo.tblRateSchedule.DESCRIPTION ELSE dbo.tblWorkSchedule.Figure_Description END AS DESCRIPTION,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN tblRateSchedule.SWT ELSE tblWorkSchedule.WorkScheduleLocation_ID END AS SWT, dbo.tblCategory.Category,
dbo.tblScheduleStatus.Schedule_Status, CASE isnull(dbo.tblWorkSchedule.Rate, 0)
WHEN 0 THEN dbo.tblRateSchedule.Rate ELSE tblWorkSchedule.Rate END AS Rate, dbo.tblRateSchedule.WorkType_ID,
dbo.tblWorkSchedule.UpliftedRate AS UPLIFTED_RATE,
CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THEN CASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID)
END WHEN 2 THEN CASE IsNull(dbo.tblSurvey.VariationOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID) END END AS UpliftedRate,
CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN CONVERT(decimal(18, 2), IsNull(dbo.tblRateSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) ELSE CONVERT(decimal(18, 2), IsNull(dbo.tblWorkSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) END AS Total, dbo.tblCompany.IsContractor, dbo.tblCompany.Percentage AS Constructor_Percentage,
dbo.tblCompany.Percentage AS Contractor_Percentage, CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) ELSE ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) END AS After_Lift, ISNULL(dbo.tblSurvey.Survey_Completed, 0)
AS Survey_Completed, LTRIM(RTRIM(dbo.tblUser.User_Title)) + ' ' + LTRIM(RTRIM(dbo.tblUser.User_Forename))
+ ' ' + LTRIM(RTRIM(dbo.tblUser.User_Surname)) AS Inserted_By, dbo.tblWorkSchedule.Inserted_By AS InsertedBy_ID,
ISNULL(dbo.tblUploadedFile.File_Name, '') AS File_Name, dbo.tblWorkSchedule.Variation_ID,
dbo.tblHistoricalRateSchedule.Rate2006Period1, dbo.tblHistoricalRateSchedule.Rate2006Period2, dbo.tblHistoricalRateSchedule.Rate2007Period1,
dbo.tblHistoricalRateSchedule.Rate2007Period2, dbo.tblHistoricalRateSchedule.Rate2008Period1,
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate, dbo.tblRateSchedule.RateScheduleYear2008Period2Rate
FROM
Hi this is my first post i am hoping its the write place. I have a page in which a customer can either add a new product and its rate as well as update an existing product. What i am trying to achieve is get the live rate of the product, when a user goes to order the product. Each existing product can be updated twice in a year either in period 1 or period 2, therefore there is a possibility that a rate hasnt been updated which means the price should be the alst updated rate. Therefore the following are the possible rates which the product can have;
dbo.tblRateSchedule.Rate - This will be the rate when a product is new and has just been added, therefore no previous rates.
dbo.tblHistoricalRateSchedule.Rate2007Period2- Most existing products are still having this rate as their latest rate.
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate - This is the rate when a rate has been updated in 2008 period 1
dbo.tblRateSchedule.RateScheduleYear2008Period2Rate - This is the rate when a rate has been updated in 2008 period 2
What i am trying to do is get the latest rate as it stands in the system, based on the above scenarios. This what I have so far, i tried to use the ISNULL, however that didnt work for probably because there are four instances. The following is the "view" which returns the rates.
SELECT dbo.tblWorkSchedule.Survey_ID, dbo.tblWorkSchedule.WorkSchedule_ID, dbo.tblWorkSchedule.WorkScheduleType_ID,
dbo.tblWorkSchedule.ScheduleStatus_ID, dbo.tblWorkSchedule.Qty, dbo.tblRateScheduleUnit.Unit, dbo.tblWorkType.Work_Type_Description,
dbo.tblRateScheduleType.Type, dbo.tblWorkSchedule.MA_Code, dbo.tblRateSchedule.SOR_Code, dbo.tblSurvey.PropertyYear_ID,
dbo.tblSurvey.PropertyPeriod_ID, ISNULL(dbo.tblWorkSchedule.Valuation, 0) AS Valuation, dbo.tblSurvey.WorkScheduleOverallStatus_ID,
dbo.tblSurvey.VariationOverallStatus_ID, dbo.tblWorkSchedule.WorkScheduleLocation_ID, dbo.tblWorkSchedule.Inserted_DateTime,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN dbo.tblRateSchedule.DESCRIPTION ELSE dbo.tblWorkSchedule.Figure_Description END AS DESCRIPTION,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN tblRateSchedule.SWT ELSE tblWorkSchedule.WorkScheduleLocation_ID END AS SWT, dbo.tblCategory.Category,
dbo.tblScheduleStatus.Schedule_Status, CASE isnull(dbo.tblWorkSchedule.Rate, 0)
WHEN 0 THEN dbo.tblRateSchedule.Rate ELSE tblWorkSchedule.Rate END AS Rate, dbo.tblRateSchedule.WorkType_ID,
dbo.tblWorkSchedule.UpliftedRate AS UPLIFTED_RATE,
CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THEN CASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID)
END WHEN 2 THEN CASE IsNull(dbo.tblSurvey.VariationOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID) END END AS UpliftedRate,
CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN CONVERT(decimal(18, 2), IsNull(dbo.tblRateSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) ELSE CONVERT(decimal(18, 2), IsNull(dbo.tblWorkSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) END AS Total, dbo.tblCompany.IsContractor, dbo.tblCompany.Percentage AS Constructor_Percentage,
dbo.tblCompany.Percentage AS Contractor_Percentage, CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) ELSE ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) END AS After_Lift, ISNULL(dbo.tblSurvey.Survey_Completed, 0)
AS Survey_Completed, LTRIM(RTRIM(dbo.tblUser.User_Title)) + ' ' + LTRIM(RTRIM(dbo.tblUser.User_Forename))
+ ' ' + LTRIM(RTRIM(dbo.tblUser.User_Surname)) AS Inserted_By, dbo.tblWorkSchedule.Inserted_By AS InsertedBy_ID,
ISNULL(dbo.tblUploadedFile.File_Name, '') AS File_Name, dbo.tblWorkSchedule.Variation_ID,
dbo.tblHistoricalRateSchedule.Rate2006Period1, dbo.tblHistoricalRateSchedule.Rate2006Period2, dbo.tblHistoricalRateSchedule.Rate2007Period1,
dbo.tblHistoricalRateSchedule.Rate2007Period2, dbo.tblHistoricalRateSchedule.Rate2008Period1,
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate, dbo.tblRateSchedule.RateScheduleYear2008Period2Rate
FROM
I have to produce a report, but not sure of the best way to get the required results
Aim - to count how many [FDMSAccountNo] there are per given [Month_end_date], and then do a case when on the[Retail_amount]
E.g.
10 Fdmsaccountno in Jan
Those 10 Fdmsaccountno vary in [Retail_amount]
I have 5 fdmsaccountno which are between %0 & £5
2fdmaccounno beterrn £6& £10
3 fdmsaccountno £10>
My query is
SELECT [FDMSAccountNo]
,[Month_end_date]
,[Retail_amount]
FROM [FDMS].[dbo].[Fact_Fee_History]
where [Fee_Sequence_Number] = '32r'
and Month_end_date between '2013-01-01' and '2013-12-01'
Currently I'm trying to add a column based on certain criteria based on the following data:
CallID GroupName CustomerPending
------ ----------- ------------
00500588FollowupN
00500588FollowupN
00500588Server N
00500588Service DeskN
00500588Service DeskN
Basically I'm trying to add an extra column, so that whenever the GroupName is "Followup", then a 'Y' will appear in the CustomerPending column for all instances of that CallID. I tried with the following, but it only provides a 'Y' in the rows (not the CallId's) where "Followup" is found.
--------------------------------------
UPDATE dbo.Asgnmnt
SET CustomerPending = 'Y'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
UPDATE dbo.Asgnmnt
SET CustomerPending = 'N'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName NOT IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
---------------------------------------
Any assistance appreciated.
Hi
I would like to get records from a table and present a result set based upon the search fields
the search fields could be any of the following: PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3,
they could enter any combination of these however if they dont enter any of the above then the search should not retrieve any thing. the table colunms are listed below and asample data set is also shown below.
Currently the only way i think it can be done is by writing multiple queries with different queries to be executed based upon the search field that have been filled? can it be done in a stored prcedure? and can it be done using non-dynamic sql?
Name, PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3, RefImage
adam, 01, 1999, 099, 3yh333, 888, 989, 999, ref1999099.jpg
Brian, 01, 2005, 029, 3yh323, 828, 929, 929, ref1929099.jpg
sid, 04, 1989, 039, 3yh343, 838, 939, 939, ref1993399.jpg
jack, 06, 1996, 069, 3yh633, 868, 969, 969, ref1669099.jpg
I am trying to accomplish the following.
There are two tables. the second one is a table that contains fields based on which the exclusion logic has to be written. It has 5 fields and there may be data in all of them or only in some of them.
The first and second table have one field in common - the Account number.(ACCT_NUM)
the exclusion is based in steps..
1) if it has all the fields in the second table for that account number, then compare all of them..
2) if only 4 of them are present,compare and check for null for the rest
3) if only 3 of them are present,compare and check for null for the rest
4) if only 2 of them are present,compare and check for null for the rest.
how do i do this... pls suggest
Thanks
Hi,
I want to delete all files in a folder where creation date is an year older. I created a For Each Loop container to go over the whole folder and then execute the following Script Task
Dim FileArchive As Int16
Dim dteArchive As Date
Dim FilePath As String
FileArchive = CType(Dts.Variables("FileArchive").Value, Int16) ' One Year FileArchive = 365
dteArchive = DateAdd("d", -FileArchive, Now.Date)
FilePath = Dts.Variables("FilePath").Value.ToString
If File.GetCreationTime(FilePath) <= dteArchive Then
Try
File.Delete(FilePath)
Catch ex As Exception
'Do Nothing
End Try
End If
Dts.TaskResult = Dts.Results.Success
Is there a better approach to this? As most of the time job may have to delete 10 or 15 files but he has to read each file and then check the date if it matches the criteria and it delete.
Say I want to search for a range of account numbers but only which are active. After I set my field for A (active) this field shows in my results, I dont want it to.
In Access you can easily just uncheck that field in design view, but how do I do it in sql?
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
***** SQL Server 2005 ********
I have a table that needs to be updated with a sequential number based on criteria.
I am trying to update the SeqID and LinkSeqID with the same sequential number if the ProductID and StoreID are in the same group. For instance the 1st three rows below are in the same group 752534 and 4, therefore the SeqID and LinkSeqID should be 1,2,3 and restart at 1 once the grouping of ProductID and StoreID changes. Please look at the examples below.
SALES Table as IS:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1
752534 4 2
752534 4 3
896784 2 4
896784 2 5
896784 4 6
898874 2 7
898968 2 8
This is what the table should look like after the update in complete.
SALES after UPDATE:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1 1 1
752534 4 2 2 2
752534 4 3 3 3
896784 2 4 1 1
896784 2 5 2 2
896784 4 6 1 1
898874 2 7 1 1
898968 2 8 1 1
Can anyone HELP me please?
I have a scenario where i need to get the starting and ending date time based on the crieteria. The criteria is I always have my start date as NS or GS in the data column and my end date as GX so i need NS or GS to be my strart date based on ts Ascending and my end date as GX to be displayed in the same columns .
Create Table Test
(Tsq INT IDENTITY (1,1),
Data Varchar (150),
ts datetime,
Tpkt_type int)
insert into test values ('GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2')
[code]....
Expected Output
---------Data----------------- ts as starttime--------------tpkt_type------data-----------------------ts as endtime--------tpkttype-
'GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2' 'GX,1,0000000000000000000000000','2013-11-13 09:47:37.007','4'
'GS,000020,000021,000022,000023','2013-11-13 09:50:25.987','2', 'GX,1,0000000000000000000000000','2013-11-13 09:50:40.920','4'
'GS,000020,000021,000022,000023','2013-11-13 09:51:28.330','2', 'GX,1,0000000000000000000000000','2013-11-13 09:51:43.257','4'
'NS,000020,000021,000022,000023','2013-12-17 16:51:09.063','18', 'GX,1,0000000000000000000000000','2013-12-17 16:51:15.257','4'
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Select h.worknumber, h.itemcode, h.descr, h.task_descr, h.qty, h.itemised,
h.serialnum, h.manufacturer, h.model_id, h.depot, h.date_in, h.date_approved,
h.est_complete_date, h.actual_complete_date, h.meterstart, h.meterstop,
h.custnum, h.name cust_name, h.addr1, h.addr2, h.town, h.county, h.postcode,
h.country_id, h.contact, h.sitename, h.siteaddr1, h.siteaddr2, h.sitetown,
[Code] ....
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours],
wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.
Hello,
I need to create a query that will count new cases based on the create date(create_date) and criteria for the groups(The only way to distinguish between the 2 major groups mts and bnb is area!= 'bnb" because everything else is MTS). The sample report I need to create below shows how it needs to be counted weekly, for a 4 month period, for the groups under MTS and BNB. The totals and grand totals can be achieved in the report tool. I want to create variables for the new cases (mts_newcases_sales, mts_newcases_salesd, bnb_newcases_salesd etc)
Ex. MTS sales : (status = 'Calculated' OR status = 'REJECTED') and errorsource != 'marketing' and accountns is null and area != 'BNB'(everything else is MTS)
MTS salesd ; Credit >= '1001' and (status = 'REJECTEDV' or status = 'ACCEPTEDS') and errorsource != 'marketing' and accountnr is null
BNB creditr: Credit < 101 and (status = 'SUBMITTED' OR status = 'REJECTEDS' OR status = 'REJECTEDA' OR STATUS = 'ACCEPTEDC')
12-Jan
19-Jan
26-Jan
2-Feb
9-Feb
16-Feb
MTS
New Cases Received
85
84
79
98
79
95
Sales
30
32
27
40
42
38
SalesD
47
34
37
23
23
37
CreditR
44
29
26
35
55
54
CreditB
6
12
9
5
7
13
CreditS
-
-
-
-
3
-
CreditP
10
11
11
24
17
7
MTS Subtotal
140
125
110
144
151
150
BNB
New Cases Received
12
13
14
14
6
11
Sales
-
-
-
-
-
-
SalesD
-
-
-
-
-
-
CreditR
12
11
12
10
5
9
CreditB
8
13
9
17
16
6
CreditS
-
-
2
-
-
-
CreditP
1
1
1
1
4
3
BNB Subtotal
21
25
24
28
26
19
Total
New Cases Received
97
97
93
112
85
106
Sales
30
32
27
40
42
38
SalesD
47
34
37
23
23
37
CreditR
56
40
38
45
60
63
CreditB
14
25
18
22
23
19
CreditS
-
-
2
-
3
-
CreditP
11
12
12
25
21
10
Grand Total
161
150
134
172
177
169
This is just a very brief bit of code
SELECT MTS_new_cases_sales, mts_new_cases_salesd €¦€¦.
FROM vwCreditN
WHERE mts_sales_new_cases = ( )...
and (status = 'Calculated' OR status = 'REJECTED')...
Can you please show me how to accomplish this?
Thank you in advance for your effort,
Rhonda
I need to know how to figure out the number of times a character occurs within a string, in SQL.
For example, "happy" concerning "p" would be evaluated to 2.
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS +
AUG_CURR_CREDITS + AUG_CURR_DEBITS +
SEP_CURR_CREDITS + SEP_CURR_DEBITS +
OCT_CURR_CREDITS + OCT_CURR_DEBITS +
NOV_CURR_CREDITS + NOV_CURR_DEBITS +
DEC_CURR_CREDITS + DEC_CURR_DEBITS +
JAN_CURR_CREDITS + JAN_CURR_DEBITS +
FEB_CURR_CREDITS + FEB_CURR_DEBITS +
MAR_CURR_CREDITS + MAR_CURR_DEBITS +
APR_CURR_CREDITS + APR_CURR_DEBITS +
MAY_CURR_CREDITS + MAY_CURR_DEBITS +
JUN_CURR_CREDITS + JUN_CURR_DEBITS) as CURR_AMT
I need to sum these amounts running from July to the month prior to whatever the current month is. So if it was August, it would only be
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS) as CURR_AMT
Is there a cleaner (shorter) way to iterate through the twelve months than either writing the query 12 times in an IF statement, or 12 CASE statements? This is only part of a query that joins several tables (not shown).
Any suggestions on the best way to write this would be valued.
I have an SSRS Report that I created. I'd like to set up a job that will run every hour, and what the job will do is send an SSRS report to a select group of recipients when a certain criteria is met. How do I go about doing this? My SSRS knowledge is very limited.
Additional Info:I created the report with a one time schedule to a certain email address. I do see the report schedule in the reportserver DB. Because I already have the schedule and the subscription id, I think all I have to do is call that subscription, but that's where I'm lost.