What's the best way to go about inserting data from several tables that all contain the same type of data I want to store (employeeID, employerID, date.. etc) into a temp table based on a select query that filters each table's data?
Any ideas?
Thanks in advance.
I'm trying to fill a temp table whose columns are the same as another table plus it has one more column. The temp table's contents are those rows in the other table that meet a particular condition plus another column that is the name of the table that is the source for the rows being added.
Example: 'permTable' has col1 and col2. The data in these two rows plus the name of the table from which it came ('permTable' in this example) are to be added to #temp.
Data in permTable
col1Â Â Â col2
11,   12
21,    22
Data in #temp after permTable's filtered contents have been added
TableName, col1Â Â Â col2
permTable, 11,    12
permTable, 21,    22
What is the syntax for an insert like this?
Here is the scenario that I cannot resolve
CREATE TABLE [dbo].[tEvents](
[EventID] [int] IDENTITY(1,1) NOT NULL,
[EventName] [varchar](1000) NOT NULL,
CONSTRAINT [PK_tEvent] PRIMARY KEY CLUSTERED
(
[EventID] ASC
)WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY]
CREATE TABLE [dbo].[tEventSelections](
[EventSelectionID] [int] IDENTITY(1,1) NOT NULL,
[EventID] [int] NOT NULL,
[StatusPID] [int] NOT NULL,
CONSTRAINT [PK_tEventSelections] PRIMARY KEY CLUSTERED
(
[EventSelectionID] ASC
)WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY]
then try this
SELECT e.eventName, es.statuspid
INTO #tmpTable
FROM tEventSelections ES
INNER JOIN tEvents E
ON E.EVentID = ES.EventID
INSERT INTO #tmpTable (eventName) values ('Another One')
DROP TABLE #tmpTable
this causes a null insert issue
(0 row(s) affected)
Msg 515, Level 16, State 2, Line 7
Cannot insert the value NULL into column 'statuspid', table 'tempdb.dbo.#tmpTable___________________________________________________________________________________________________________000000000130'; column does not allow nulls. INSERT fails.
The statement has been terminated.
So how do I allow the null, as the not null is coming from the ES table. But I want to allow the insert to happen without having to create the table first, this code works in SQL 2000 but fails in 2005, inserting all fileds into the insert also has it's own issues as some of the fields are delibertly left blank so in some circumstances the data returned to a grid displays correctly.
This method has been used in quite a lot of stored procedures and will be a nightmare to correct if each has to be edited.
One example of the use of is to return a dataset and then add a row at the bottom which is a sum of all the rows.
Regards
Hi,
I have a 'charges' table that records charges for an invoice. There are several different types of charges, each with its own unique set of additional data fields that need to be recorded.
I maintain separate tables for each charge type and these tables participate in an "ISA" relationship with the main charges table.
Here is a simplified version of my schema. Hourly charges are one type of charge:
charges table
=============
id int (autoincremented primary key)
date datetime
amount money
hourly_charges table
====================
charge_id int (primary key, also a foreign key to charges table)
start_time datetime
end_time datetime
I need to write a query that will duplicate all charges meeting a certain criteria by inserting new records into both the charges table and the hourly_charges table.
Here is some non-working pseudo-code that hopefully will get across what I would like to accomplish:
INSERT INTO charges JOIN hourly_charges
(
charges.date,
charges.amount,
hourly_charges.charge_id,
hourly_charges.start_time,
hourly_charges.end_time
)
SELECT
date,
amount,
SCOPE_IDENTITY(),
start_time,
end_time
FROM charges
JOIN hourly_charges
ON charges.id = hourly_charges.charge_id
WHERE some condition is true
Now I realize this code is invalid and I'll have to go about this an entirely different way but I'm wondering if someone can tell me what the proper way is.
Thanks,
Adam Soltys
http://adamsoltys.com/
I have a table that I filled with data imported from another database.
What I need to do is now take this huge table and break apart the information and put it into 5 smaller tables.
So I have a huge insert statement.
I have one main table called Property with two keys. One key is a "Prop_ID" and the other is "owner" where Prop_Id is a automated unique ID. Once the information is inserted into that table, I then get the Unique ID that it was given, and I then used that ID to insert into the other tables.
The problem I am encountering is I keep getting the following error
Violation of PRIMARY KEY constraint 'PK_Prop_Res_Detail'. Cannot insert duplicate key in object 'Prop_Res_Detail'.
The statement has been terminated.
I have an idea what might be going wrong, but I am not sure. What I want to happen is that I want the query to look at the first row of the huge table and then do all 4 of the inserts, and then go to the next row. But I think it is trying to all the inserts into the property table, and then go on to the Prop_Res_Detail table and that is why I am getting that error.
Any help is greatly appreicated.
here is the code..
Code:
CREATE PROCEDURE [dbo].[Insert_Properties]
AS
DECLARE @Prop_ID Int
SET NOCOUNT ON
INSERT INTO Property(Acres,
Assoc_Phone,
Assoc_Cell,
AppraisalForm,
Area,
Assess_Account,
AttachDetach,
Block,
City,
County,
Directions,
DOM,
ER_EA,
FloodZone,
Import_From,
Import_ID,
Insert_Date,
LandSQFT,
LandSQFTDim,
LegalRemarks,
ListAppraiser_ID,
ListAssoc_ID,
ListBroker_ID,
ListDate,
Listing_Office_Remarks,
ListPrice,
Lot,
Map,
Num_Images,
Office_Phone,
Original_ListPrice,
Owner,
Pending_Date,
PhotoName,
PropSubType,
Prop_Type,
Quad,
Remarks,
State,
Status,
StreetDir,
StreetNum,
StreetName,
Township,
UnitNumber,
ZipCode)
SELECT CONVERT(FLOAT(8), Acres),
CONVERT(Varchar(25), Assoc_Phone),
CONVERT(Varchar(25),Assoc_Cell),
CONVERT(Varchar(50), AppraisalForm),
CONVERT(Varchar(10), Area),
CONVERT(Varchar(50), Assess_Account),
CONVERT(Varchar(20), AttachDetach),
CONVERT(Varchar(20), Block),
CONVERT(Varchar(40), City),
CONVERT(Varchar(50), County),
CONVERT(Varchar(1000), Directions),
CONVERT(int, DOM),
CONVERT(Varchar(10), ER_EA),
CONVERT(Varchar(50), FloodZone),
CONVERT(Varchar(20), Import_From),
CONVERT(Varchar(20), Import_ID),
CONVERT(datetime, Insert_Date, 101),
CONVERT(Varchar(20), LandSQFT),
CONVERT(Varchar(50), LandSQFTDim),
CONVERT(Varchar(2000), LegalRemarks),
CONVERT(Varchar(50), ListAppraiser_ID),
CONVERT(Varchar(50), ListAssoc_ID),
CONVERT(Varchar(50), ListBroker_ID),
CONVERT(varchar(11), ListDate),
CONVERT(Varchar(1000), Listing_Office_Remarks),
CONVERT(Varchar(10), ListPrice),
CONVERT(Varchar(20), Lot),
CONVERT(Varchar(10), Map),
CONVERT(Varchar(10), Num_Images),
CONVERT(Varchar(25), Office_Phone),
CONVERT(Varchar(10), Original_ListPrice),
CONVERT(Varchar(50), Owner),
CONVERT(datetime, Pending_Date, 101),
CONVERT(Varchar(50), PhotoName),
CONVERT(Varchar(25), PropSubType),
CONVERT(Varchar(20), Prop_Type),
CONVERT(Varchar(10), Quad),
CONVERT(Varchar(1000), Remarks),
CONVERT(Varchar(25), State),
CONVERT(Varchar(10), Status),
CONVERT(Varchar(4), StreetDir),
CONVERT(Varchar(15), StreetNum),
CONVERT(Varchar(50), StreetName),
CONVERT(Varchar(20), Township),
CONVERT(Varchar(6), UnitNumber),
CONVERT(Varchar(20), ZipCode )
FROM Imported_Closed_Property_From_MLS
SET @Prop_ID = @@Identity
/*Property Res Table */
INSERT INTO Prop_Res_Detail(Prop_ID,
Addition,
Appliances,
Basement_Area,
BasementDesc,
Builder,
Construction,
Cool,
Dining,
District_School,
Energy,
Exterior_Features,
Fence,
Floors,
Foundation,
FP,
FP_Type,
Garage_Attach_Detach,
Garage_Cap,
Handicap,
Heat,
HOA,
HOA_Fee,
HOA_Inc,
HOA_Period,
Inlaw_Plan,
Interior_Features,
Livestock,
Lot_Desc,
Mechanical,
NumLivingArea,
Num_Baths,
Num_Beds,
Num_Levels,
Other_Info,
OvenDesc,
Owner,
Parking,
Patio,
Patio_Dim,
Perc_Basement_Com,
Pool,
Pool_Type,
Prop_Faces,
Range,
RangeDesc,
Remodeled,
Rental,
RentalAmount,
Roof_Type,
Roof_Year,
RoomOther,
Sect,
SQFT,
SQFTSource,
Style,
Tax_Amount,
Tot_Rooms,
UtilityAvailable,
WindowType,
Year_Built)
SELECT @Prop_ID,
CONVERT(Varchar(50), Addition),
CONVERT(Varchar(100), Appliances),
CONVERT(Varchar(25), Basement_Area),
CONVERT(Varchar(100), BasementDesc),
CONVERT(Varchar(50), Builder),
CONVERT(Varchar(50), Construction),
CONVERT(Varchar(20), Cool),
CONVERT(Varchar(10), Dining),
CONVERT(Varchar(60), District_School),
CONVERT(Varchar(100), Energy),
CONVERT(Varchar(100), Exterior_Features),
CONVERT(Varchar(40), Fence),
CONVERT(Varchar(100), Floors),
CONVERT(Varchar(40), Foundation),
CONVERT(Varchar(50), FP),
CONVERT(Varchar(40), FP_Type),
CONVERT(Varchar(50), Garage_Attach_Detach),
CONVERT(Varchar(25), Garage_Cap),
CONVERT(Varchar(20), Handicap),
CONVERT(Varchar(20), Heat),
CONVERT(Varchar(40), HOA),
CONVERT(Varchar(30), HOA_Fee),
CONVERT(Varchar(100), HOA_Inc),
CONVERT(Varchar(20), HOA_Period),
CONVERT(Varchar(20), Inlaw_Plan),
CONVERT(Varchar(100), Interior_Features),
CONVERT(Varchar(40), Livestock),
CONVERT(Varchar(400), Lot_Desc),
CONVERT(Varchar(100), Mechanical),
CONVERT(Varchar(10), NumLivingArea),
CONVERT(Varchar(5), Num_Baths),
CONVERT(Varchar(5), Num_Beds),
CONVERT(Varchar(30), Num_Levels),
CONVERT(Varchar(100), Other_Info),
CONVERT(Varchar(100), OvenDesc),
CONVERT(Varchar(50), Owner),
CONVERT(Varchar(100), Parking),
CONVERT(Varchar(25), Patio),
CONVERT(Varchar(50), Patio_Dim),
CONVERT(Varchar(25), Perc_Basement_Com),
CONVERT(Varchar(20), Pool),
CONVERT(Varchar(20), Pool_Type),
CONVERT(Varchar(40), Prop_Faces),
CONVERT(Varchar(20), Range),
CONVERT(Varchar(100), RangeDesc),
CONVERT(Varchar(50), Remodeled),
CONVERT(Varchar(10), Rental),
CONVERT(Varchar(10), RentalAmount),
CONVERT(Varchar(20), Roof_Type),
CONVERT(Varchar(5), Roof_year),
CONVERT(Varchar(100), RoomOther),
CONVERT(Varchar(10), Sect),
CONVERT(Varchar(10), SQFT),
CONVERT(Varchar(50), SQFTSource),
CONVERT(Varchar(100), Style),
CONVERT(Varchar(10), Tax_Amount),
CONVERT(Varchar(5), Tot_Rooms),
CONVERT(Varchar(100), UtilityAvailable),
CONVERT(Varchar(50), WindowType),
CONVERT(Varchar(5), Year_Built)
FROM Imported_Closed_Property_From_MLS
/*Sold Info Table */
INSERT INTO Sold_Info(Prop_ID,
Buy_Pts,
Closed_Date,
Closed_Price,
Closed_Price_SQFT,
COOP_Sales,
Days_On_Market,
InterestRate,
Lender,
LoanAmount,
LoanTerms,
Loan_Years,
Origination_Fee,
Owner,
SellerConcessions,
LoanType,
Sold_Remarks)
SELECT @Prop_ID,
CONVERT(Varchar(10), Buy_Pts),
CONVERT(datetime, Closed_Date, 101),
CONVERT(Varchar(10), Closed_Price),
CONVERT(Varchar(50), Closed_Price_SQFT),
CONVERT(Varchar(50), COOP_Sales),
CONVERT(Varchar(5), DOM),
CONVERT(Varchar(10), InterestRate),
CONVERT(Varchar(50), Lender),
CONVERT(Varchar(10), LoanAmount),
CONVERT(Varchar(50), LoanTerms),
CONVERT(Varchar(10), Loan_Years),
CONVERT(Varchar(10), Origination_Fee),
CONVERT(Varchar(50), Owner),
CONVERT(Varchar(100), SellerConcessions),
CONVERT(Varchar(25), LoanType),
CONVERT(Varchar(1000), Sold_Remarks)
FROM Imported_Closed_Property_From_MLS
/*Remarks Table */
INSERT INTO Remarks(Prop_ID,
App_Date,
App_Remark,
Contract_Date,
Inspection_Type,
Owner,
PendingSalesPrice,
PendingSaleComments)
SELECT @Prop_ID,
CONVERT(datetime, App_Date, 101),
CONVERT(Varchar(1000), App_Remark),
CONVERT(datetime, Contract_Date, 101),
CONVERT(Varchar(50), Inspection_Type),
CONVERT(Varchar(50), Owner),
CONVERT(Varchar(10), PendingSalesPrice),
CONVERT(Varchar(1000), PendingSaleComments)
FROM Imported_Closed_Property_From_MLS
GO
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
I am trying to add multiple records to my table (insert/select).
INSERT INTO Users
( User_id ,
Name
)
SELECT ( SELECT MAX(User_id) + 1
FROM Users
) ,
Name
But I get the error:
Violation of PRIMARY KEY constraint 'PK_Users'. Cannot insert duplicate key in object 'dbo.Users'.
But I am using the max User_id + 1, so it can't be duplicate
This would insert about 20 records.
Why the error?
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
I have the following query and I would like to combine it into one query instead of using several temp tables.
IF OBJECT_ID('Tempdb..#a') IS NOT NULL DROP TABLE #a
SELECT *
INTO #a
FROM #Web_table w WITH(NOLOCK)
WHERE w.generated_date IS NOT NULL
IF OBJECT_ID('Tempdb..#b') IS NOT NULL DROP TABLE #b
[code]....
Hi Guys,
I have to work with a poorly designed table :(, that has columns
IDINT,
thisIDvarchar(50) null,
parentIDvarchar(50) null,
Titlevarchar(255) null,
Description varchar(8000) null,
ProductTypevarchar(255) null,
The reason it is poorly designed is the table is used to hold questions and answers, all with a 1:1 relationship. Instead of having ID, ProductType, Question, Answer they have unfortunately adopted the approach of the above i.e:
id 1
thisID 3
parentid nuLL
DESCRIPTION: this is a question
id 20
thisID 3_1
parentID 3
DESCRIPTION: this is the answer to the question above
So I am writing a sproc that does this using a temp table. I got this far:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:Spencer
-- =============================================
ALTER PROCEDURE [dbo].[GetFAQs]
-- Add the parameters for the stored procedure here
@ProductType varchar(255)
AS
BEGIN
SET NOCOUNT ON;
-- Insert statements for procedure here
CREATE TABLE TEMP
(
IDINT,
thisIDvarchar(50) null,
parentIDvarchar(50) null,
Titlevarchar(255) null,
DescriptionQvarchar(8000) null,
DescriptionAvarchar(8000) null,
ProductTypevarchar(255) null,
)
SELECT
ID,
thisID,
parentID,
Title,
DescriptionQ,
DescriptionA,
ProductType
FROM
A2Z
WHERE
ProductType = @ProductType AND parentID IS NULL
END
GO
This gets all my questions for that product type.
What I need to do is load the questions into my temp table and then run through the a2z table again gaining the answers to the questions (the parentid holds the question ID). The answers then will also get loaded into the temp table.
Any bright sparks out there that can help me?
Cheers
Does anyone know what permissions are required to run bulk insert to a temp table?
I've got a procedure that creates a temp table and runs bulk insert on it. Only problem is that it seems that only the dbo can run it. Anyone else gets the following error:
"The current user is not the database or object owner of table '#bulk'. Cannot perform SET operation."
Alternatively, does anyone know how to submit a scheduled job as a different user?
I've got my import system set up to create a scheduled job that kicks off right away. The job runs the 1st step which includes a bulk insert. The second step checks if the first step completely failed or not. Works great except that when the user runs the submission procedure, it comes back with that error.
Microsoft's brain-dead bulk insert command....aaargh. Every method around it's design flaws is blocked by another design flaw.
Hi ,
I am a newbie and i need to provide access for developer for him to use bulk insert ... on temp tables.
what permission do i need to provide the developer i cannot provide bulkadmin permission to him what are the other ways to provide him the access.
Please help me with this.
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedHi,
I am trying to insert into temp table multiple times and then pull everything out. How would I do that? I get records back, but everything is 0. Why? Here is my stored procedure.
CREATE PROCEDURE sp_SummaryReport
(
@startdate datetime,
@enddate datetime
)
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #CalcTemp (DataID bigint IDENTITY(1,1) NOT FOR REPLICATION, ReportType varchar(2), Volume int, NetEffect decimal(10,1), GrossEffect decimal(10,1), WeekEndDate datetime)
DECLARE @OnTime decimal(10,1)
DECLARE @UnControlled decimal(10,1)
DECLARE @Volume int
DECLARE @GrossEffect decimal(10,1)
DECLARE @NetEffect decimal(10,1)
DECLARE @WeekEndDate datetime
--ARS AA
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AA')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AA')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AA')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AA',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--ARS AN
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AN')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AN')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AN')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AN',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--ARS AC
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AC')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AC')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AC')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AC',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--General
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'GN' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'GN' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'GN' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('GN',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--Odessey
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'OD' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'OD' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'OD' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('OD',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--General
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'HU' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'HU' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'HU' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('HU',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
SELECTtblListReportType.ReportType AS 'Report Type',
tblListReportType.ReportID AS ReportID,
SUM(#CalcTemp.Volume) AS Volume,
CAST(SUM(#CalcTemp.NetEffect)/COUNT(#CalcTemp.DataID) as decimal(10,1)) AS 'Net % Effective',
CAST(SUM(#CalcTemp.GrossEffect)/COUNT(#CalcTemp.DataID) as decimal(10,1)) AS 'Gross % Effective'
FROM#CalcTemp
INNER JOIN tblListReportType ON LTRIM(RTRIM(LOWER(#CalcTemp.ReportType))) = LTRIM(RTRIM(LOWER(tblListReportType.ReportAbv)))
GROUP BYtblListReportType.ReportType,
tblListReportType.ReportID
END
GO
i have temp table name "#TempResult" with column names Memberid,Month,Year. Consider this temp table alredy has some rows from previuos query. I have one more table name "Rebate" which also has columns MemberID,Month, Year and some more columns. Now i wanted to insert rows from "Rebate" Table into Temp Table where MemberID.Month and Year DOES NOT exist in Temp table.
MemberID + Month + Year should ne unique in Temp table
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary  (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
The following batch does not compile. It works for real tables but not temp tables. I need to get this to work. Any ideas? Thanks.
code
-------------------
IF 1 = 1 --IF CONDITION
BEGIN
SELECT * INTO #TEMP FROM TABLE1
END
ELSE
BEGIN
SELECT * INTO #TEMP FROM TABLE2
END
--------------------
Error Msg
Msg 2714, Level 16, State 1, Line 7
There is already an object named '#TEMP' in the database.
--------------------
Hello
I am building a survey application.
I have 8 questions.
Textbox - Call reference
Dropdownmenu - choose Support method
Radio button lists - Customer satisfaction questions 1-5
Multiline textbox - other comments.
I want to insert textbox, dropdown menu into a db table, then insert each question score into a score column with each question having an ID.
I envisage to do this I will need an insert query for the textbox and dropdownlist and then an insert for each question based on ID and score.
Please help me!
Thanks
Andrew
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies View RelatedI need to be able to bulk insert a bunch of tables from their corresponding flat file. I have created an XML file (see below) which has the file name/table name pair at each node. I then created a ForEachLoop task and used the Node enumeration type and the following OuterXpathString: ReferenceFiles/File. At this point I get lost. How do I pass the 2 inside node values (file name and table name) to variables which I can then use as expressions for the bulk insert task inside the Foreach?
Here is XML file:
Code Snippet
<ReferenceFiles>
<File>
<FileName>Ref_Categories.txt</FileName>
<TableName>Ref_Categories</TableName>
</File>
<File>
<FileName>Ref_Configs.txt</FileName>
<TableName>Ref_Configs</TableName>
</File>
</ReferenceFiles>
Thanks.
Hello. I'm having some difficulty trying to output the results of two seperate queries into the same temporary table.
Does anyone know if it is possible to use the UNION operator to output the results into a temporary table?
Select * From TableA
UNION
Select * From TableB
<---output result to temporary table here--->
Alternatively, is it possible to output the results of two queries in to the same temporary table without the UNION clause?
The following statement fails on the second SELECT INTO due to the fact that #MyTempTable already exists.
Select * INTO #MyTempTable FROM TableA
Select * INTO #MyTempTable FROM TableB
Thanks in advance.
Hi,
How do I insert data into an existing temporary table? Note: I’m primarily a .NET programmer who has to do T-SQL to grab data from time to time.
What I am trying to do is this:
1) Put the scores for all the people who have completed a questionnaire into a temporary table called #GroupConfidence.
2) Add on a row at the end that gives an average for each score (ie the last row is an average of the column above).
I need my SP to give me a DataSet that I can throw straight to my .NET reporting engine (I don’t want to do any number crunching inside .NET) - that's why I want to add on the 'average' row at the end.
If I do this (below) the temporary table (#GroupConfidence) gets created and the values inserted.
-- Insert the results into the #GroupConfidence table
SELECTRTRIM(UC.FirstName + ' ' + UC.LastName) AS 'FullName',
RP.SubmitID,
RP.GL_Score,
RP.GP_Score,
RP.GPH_Score,
RP.DL_Score,
RP.MP_Score,
RP.Role_MI_Score,
RP.Role_ASXRE_Score,
RP.Role_APRA_Score,
RP.Overall_Score AS 'AllCategories'
INTO#GroupConfidence
FROMRodResultPercentages RP
JOIN#UsersCompleted UC ON UC.SubmitID = RP.SubmitID
My problem is that #GroupConfidence already exists so in fact I have this code below:
CREATE TABLE #GroupConfidence
([FullName] [varchar] (200) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[SubmitID] [int] NOT NULL,
[GL_Score] [decimal](19, 10) NOT NULL,
[GP_Score] [decimal](19, 10) NOT NULL,
[GPH_Score] [decimal](19, 10) NOT NULL,
[DL_Score] [decimal](19, 10) NOT NULL,
[MP_Score] [decimal](19, 10) NOT NULL,
[Role_MI_Score] [decimal](19, 10) NOT NULL,
[Role_ASXRE_Score] [decimal](19, 10) NOT NULL,
[Role_APRA_Score] [decimal](19, 10) NOT NULL,
[AllCategories] [decimal](19, 10) NOT NULL
)
-- Insert the results into the #GroupConfidence table
SELECTRTRIM(UC.FirstName + ' ' + UC.LastName) AS 'FullName',
RP.SubmitID,
RP.GL_Score,
RP.GP_Score,
RP.GPH_Score,
RP.DL_Score,
RP.MP_Score,
RP.Role_MI_Score,
RP.Role_ASXRE_Score,
RP.Role_APRA_Score,
RP.Overall_Score AS 'AllCategories'
INTO#GroupConfidence
FROMRodResultPercentages RP
JOIN#UsersCompleted UC ON UC.SubmitID = RP.SubmitID
So I get this error: Server: Msg 2714, Level 16, State 1, Line 109
There is already an object named '#GroupConfidence' in the database.
Thanks in advance,
Ian.
Hi Everyone,
I insert data to #temp table by using 'select into'. Then I insert one extra row. when I select data, why it does not follow the order?
(the last insert should be in the last row but it becomes the first row)
Here is the simple script
Select name,code,dates into #temp From member Order By Dates
Insert #temp (name,code,dates)
select 'dave', '0', getdate()
select * from #temp
How do I know when to use a table variable, and when to use a temp table in my stored procedures? It seems that in most cases table variables are more efficient (in terms of execution time / CPU usage) but some of my stored procedures perform an order of magnitute better with temp tables instead.
Short of testing the stored proc both ways, how do I know what to do?
declare @Temp table
or
create table #Temp
I have a few hundred users, maybe a dozen or two active at any given time, accessing the same database via ASP. The database has many tables, one being a very large orders table with a few million records, in which I have created a view against. A view only because I need to allow the user to filter quite extensively against the results. The users typically only need to view records for the last 30 days and results for each user might be five thousand records or less.
My question is this. Would I be better off writing each user's resultset to a temp table for that user's session and allow the filtering and sorting by the user go against that temp table and increase my hardware requirements to accomodate that. Possibly to the point of creating a database cluster. OR would I be better off leaving it as is where each users uses the same view.
FYI...each user may need visibility to only a hand full of fields, but over all the view must maintain many fields.
Any thoughts on this would be greatly appreciated. Thanks in advance.
Dave
How do I do this? I have two queries that create temp tables. I need to union them together and create one temp table. Anyone done this with success?
View 4 Replies View RelatedI am running SQL Server Best Practices on a SQL 2000database and it is recommending me to change the temptables inside SPs to table variables.I had read already in other places to use table variablesover temp tables. I also know I can't create indexes asI can on temp tables. Instead I'll have to create eithera primary key and/or a unique index on a table variable.One question I have is let's say I will be putting thousandsof records in a temp table, should i still choose a tablevariable over a temp table for this? Or is there arecommended limit where if I have to store certainnumber of records then it's better to store them ina temp table rather than a table variable? Or numberof records is not the factor to decide whether to usetemp tables or table variables?I would like to know when it's ideal or best to usetemp tables instead of table variables and vice versa.Thank you
View 1 Replies View RelatedI have a problem where my users complain that a select statement takes too long, at 90 seconds, to read 120 records out of a database.
The select statement reads from 9 tables three of which contain 1000000 records, the others contain between 100 and 250000 records.
I have checked that each column in the joins are indexed - they are (but some of them are clustered indexes, not unclustered).
I have run the SQL Profiler trace from the run of the query through the "Database Engine Tuning Advisor". That just suggested two statistics items which I added (no benefit) and two indexes for tables that are not involved at all in the query (I didn't add these).
I also ran the query through the Query window in SSMS with "Include Actual Execution Plan" enabled. This showed that all the execution time was being taken up by searches of the clustered indexes.
I have tried running the select with just three tables involved, and it completes fast. I added a fourth and it took 7 seconds. However there was no WHERE clause for the fourth table, so I got a cartesian product which might have explained the problem.
So my question is: Is it normal for such a type of read query to take 90 seconds to complete?
Is there anything I could do to speed it up.
Any other thoughts?
Thanks
I am building a dynamic query stored procedure. I am first filling a temp table with data:
Declare
@Counter int
drop table #tempmerge
create table #tempmerge(IDIndex int IDENTITY, CitationNum char(9),Exp1 int)
insert into #tempmerge
Select E_Cit_For_Merge, Count(*) as Exp1
from dbo.E_Citation_XML_Data
group by E_Cit_For_Merge
having Count(*)>1
select * from #tempmerge
Results returned from #tempmerge table:
IDIndex CitationNum Exp1
----------- ----------- -----------
1 4AA020621 2
2 4AA022361 2
3 4AA022391 2
4 4AA022423 2
5 4AA022532 3
6 4AA027761 2
7 4AA030513 2
Then, I want to use a while loop, looping thru the #tempmerge table
and retrieving the CitationNum value of each row:
set @RowCount = (Select Count(*) from #tempmerge)
set @Counter = 1
While @Counter <= @RowCount
Begin
Set @WhereStatement2 = ' where E_Cit_For_Merge= (Select CitationNum from #tempmerge
where IDIndex = @Counter)'
E_Cit_For_Merge is a field in a SQL table.
I Declare @Counter as int.
I get the Error message that:
FROM E_Citation_XML_Data where E_Cit_For_Merge= (Select CitationNum from #tempmerge
where IDIndex = @Counter)
Server: Msg 137, Level 15, State 2, Line 24
Must declare the variable '@Counter'.
Any Suggestions?
Thanks
JEB
hi all,
i have speed issue on displaying 4k line of records using temp table.. before this it works fine and fast.. but maybe when i starts joining group by it loads slower.
SELECT DISTINCT customlotno, itemid, ItemName, Ownership, TotalCTNInPlt, TotalCarton, sum(CartonPcs) AS CartonPcs, StorageID, StorageStatus ,OriginUOM, PickQtyUOM, WhsID, WhsName, LocID, Zone, Expirydate, recvDate
INTO #ByItemID
FROM (
SELECT * FROM tblItemdetail
)AS L1
GROUP BY customlotno, itemid, ItemName, ownership, TotalCTNInPlt, TotalCarton, StorageID, StorageStatus ,OriginUOM, PickQtyUOM, WhsID, WhsName, LocID, Zone, Expirydate, recvDate
SELECT *
FROM #ByItemID
ORDER BY CustomLotNo
DROP TABLE #ByItemID
----------------------------
or maybe just use something like nested SELECT like this, but cannot work:-
select customlotno, itemid, locid(
select * from tblitemdetail
where customlotno='IN28606000'
) AS T
GROUP BY customlotno, itemid, locid
~~~Focus on problem, not solution~~~
I have to select several field values from a table and need to assign them to different variables in my SP.Here's what I do now:
declare @ReceiverEmail nvarchar(50)
SET @ReceiverEmail=(SELECT Email FROM Users WHERE UserCode=@UserCodeOwner)
declare @UsernameSender nvarchar(50)
SET @UsernameSender=(SELECT Username FROM Users WHERE UserCode=@UserCodeOwner)As you can see I have to search the Users table twice: once for the Email and a second time for the Username...and all that based on the SAME usercode...:SSo, is there an option where I only have to search the table once and return the Email and UserName fields and assign them to my variables (without using a temp table....)?
The first query returns me the results from multiple databases, thesecond does the same thing except it puts the result into a #temptable? Could someone please show me an example of this using the firstquery? The first query uses the @exec_context and I am having achallenge trying to figure out how to make the call from within adifferent context and still insert into a #temp table.DECLARE @exec_context varchar(30)declare @sql nvarchar(4000)DECLARE @DBNAME nvarchar(50)DECLARE companies_cursor CURSOR FORSELECT DBNAMEFROM DBINFOWHERE DBNAME NOT IN ('master', 'tempdb', 'msdb', 'model')ORDER BY DBNAMEOPEN companies_cursorFETCH NEXT FROM companies_cursor INTO @DBNAMEWHILE @@FETCH_STATUS = 0BEGINset @exec_context = @DBNAME + '.dbo.sp_executesql 'set @sql = N'select top 10 * from products'exec @exec_context @sqlFETCH NEXT FROM companies_cursor INTO @DBNAMEENDCLOSE companies_cursorDEALLOCATE companies_cursor-------------------------------------------------------------------------------------CREATE TABLE #Test (field list here)declare @sql nvarchar(4000)DECLARE @DBNAME nvarchar(50)DECLARE companies_cursor CURSOR FORSELECT NAMEFROM sysdatabasesWHERE OBJECT_ID(Name+'.dbo.products') IS NOT NULLORDER BY NAMEOPEN companies_cursorFETCH NEXT FROM companies_cursor INTO @DBNAMEWHILE @@FETCH_STATUS = 0BEGINset @sql = N'select top 10 * from '+@DBNAME+'.dbo.products'INSERT INTO #Testexec (@sql)FETCH NEXT FROM companies_cursor INTO @DBNAMEENDCLOSE companies_cursorDEALLOCATE companies_cursorSELECT * from #TestDROP TABLE #Test
View 1 Replies View Relatedi have temp table name "#TempResult" with column names Memberid,Month,Year. Consider this temp table alredy has some rows from previuos query. I have one more table name "Rebate" which also has columns MemberID,Month, Year and some more columns. Now i wanted to insert rows from "Rebate" Table into Temp Table where MemberID.Month and Year DOES NOT exist in Temp table.
MemberID + Month + Year should ne unique in Temp table