What should be size of tempdb.
I am daily getting tempdb translog is full error.
Then i need to dump the transaction with dump traan.... with no log.
After this only server working fine.
Any solution please...
Thanks in Advance.
Selvam
Hi,
What should be the size of TEMPDB should i set ,if my production databse is 500 mb to 1 gb.
Thanks
Nil.
I have an SQL server that has probably 20 or so people connected at a time. In addition to these people, there are five people that run Crystal reports with some voluminous data, usually coming from views.
About every week and a half, one of the report writers get a message that the master device is full and must be expanded, because tempdb is full. When I expand temdb, it fixes the problem.
My question is, the tempdb is now 800 Megs. The sum total of memory allocated to all of the other(besides master)devices is 650. Should this be a flag that something is wrong? It just keeps growing and growing. Tempdb is not on it's own device-it is still on master.
Any advice would be greatly appreciated!
Jane Davis
when I restart SQL server my tempdb database is 1.9Gb. I thought it was deleted and replaced with a copy of the model database. Is this not so?
View 2 Replies View RelatedI have read that MS suggests you tempdb be atleast 25% of your largest database. Is there any way to monitor your tempdb to determine if it is filling up or being 100% utilized and needs to be expanded?
Thanks,
David
I have a server with 2.5GB of RAM. I am allocation 1GB to SQL Server and am attempting to put 500MB tempdb in RAM. It would appear as though I am hitting some sort of max threshhold that I am unaware of as I can set tempdb in RAM up to 320MB. Anything beyond that and I get the following errors on start up and SQL Server will not start.
98/12/02 08:25:47.03 spid1 Clearing temp db
98/12/02 08:25:47.03 kernel udactivate(IN_RAM): Operating system error 8(Not enough storage is available to process this command.) encountered
98/12/02 08:25:47.03 spid1 Device activation error. The physical filename 'IN_RAM' may be incorrect
98/12/02 08:25:47.03 spid1 crdb_tempdb: Unable to move tempdb into RAM; RAM device doesn't exist, cannot be created, or doesn't have enough space for tempdb
I am certain that I am not hitting a Physical RAM limit and the memory checks out and is visible to NT. Please Advise. Thanks
Hello Everyone!
Is there any way by which I can determine whether the tempdb size for the SQL Server is enough or not? (I ean are there any symptoms like excessive paging etc. that can identify this bottleneck?).
Thanks!
We had a runaway query which built the size of tempdb to 24000mb. Then someone changed the unrestricted file growth property to restricted growth while the size was 24000mb. Now I can not reduce the initial size. I have set the property back to unrestricted file growth. I have shrunk the tempdb and available space is almost 24000mb. I have stopped sqlserver. I even deleted the existing tempdb.mdf & tempdb.ldf files. But when SQL server is restarted, the initial size is set to 24000mb. It will not let me reduce the size. Is there anything short of manipulating the system tables to reduce the size back to 500mb?
View 5 Replies View RelatedWe currently have a hard-drive size of 3.89MB and 3.3MB is being used by tempdb. I have tried shrinking the database truncateonly but this is not working. The problem is that the tempdb file is as large as my C: drive size. In addition can this be moved to another directory. For example can I move the tempdb.mdf and ldf from C: to E:. Any help would be greatly appreciated.
Thanks
Hi All,
On my server C drive is of 34GB. Right now tempdb size is 22GB which is causing C drive to be full. How I can I reduce it? I dont want to move tempdb to any other drive, and I am only looking a way to reduce its size.
Please help quickly....
Thanks,
Zee
I have the classic "tempdb-out-of-space" problem. Unfortunately, my server fails to reboot properly as tempdb is located on the C: drive which is now completely full. While I understand the changes required to prevent this from happening again, I want to know if it will even reboot if I delete tempdb.mdf and tempdb.ldf. I've read conflicting information on MSDN about default tempdb file size:
- files are built to the default size (I will be fine)
- files are built to the same size as before (problem)
Which is true for SQL 2005?
I have a tempdb that was created at 1Gig. I don't know why but I want to shrink it below the original creation size. Is there a way to shrink this file or create a new file and delete the old?
I have tried shinkfile and shrink database with no luck.
Thanks Jeff
Against my better judgement, we are using fixed allocations of tempdb on some of our servers. This is to deal with specific limitations of our applicaitons and hardware configuration that I'm not allowed to discuss in much detail.
The problem that I have is that the present plan is to configure the data file at around 18 Gb and the log file at around 2 Gb. This seems just plain wrong to me, but I haven't been able to find a formal recommendation that gives any relative sizing. I would expect to have about twice as much log as data space, especially for tempdb.
Does anyone know of a formal citation (preferably from Microsoft) that discusses this?
-PatP
We have a problem with the size of the tempdb.mdf file. The tempdb had grown to 25Gb and consumed all the available disk space. SQL server was restarted and the tempdb was reset back to the default size. The following day the tempdb suddenly increased in size from 200mb to 25GB within a very short space of time. There were a couple of event log entries from sqlservger regarding the lack of disk. Since then the server is running without any problems but the level of free space is virtually zero on the drive with tempdb.mdf file.
What would cause the tempdb to grow suddenly and to this size?
Can I control the size the tempdb can grow to?
SQL 2005 (x64) sp1
W2K3 R2 SP1
I am considering turning on RCSI to prevent blocking, how do I estimate the size of tempdb?
I am monitoring current tempdb usage of space for
UserObjectsUsageKB,
InternalObjectsKB,
VersionStoreKB,
FreeSpaceKB. Â
I have got SQLv6.5 SP5a with SMS1.2 SP4 on seperate Alpha boxes. I have automated the backups so they are scheduled for after hours. SMS gets backed up first and TEMPDB shortly afterwards. However, since a back log in SMS MIFS has happened, the TEMPDB backup displays of 100,000pages backed up. When you back it up on its own, it only shows 170+ pages.
The SMS DB is 600MB in size, the Log is 210MB, Open objects is 5000, and TEMPDB is set 210MB on its own device.
Any ideas
SQL Server 6.5
I am running a Query in my Production Server. It is hardly taking 15 Mins. The same Query is taking more than 3 Hours in my test server. I can see the only difference between these two servers is Tempdb Size. Will tempdb size matters the performance of a Query. Can anyone reply me?
Thanks in Advance
Krishnakumar
My prod server (only default instance) is configured TempDB 1024 MB data and Log 200MB. when I run 'sqlperf logspace' it shows most of time around 45% 'log space used'. There nothing going on the instance when I ran 'whoisactive' and select * from sys.sysprocesses where dbid = 2!!!
So my questions are is this normal to see log space around 45%, how to find what what CAUSED the tempdb log space to grow 45%? Is there something to do about it?
We have installed SQL Server 2008 R2 SP1 instance and it's having Share Point 2010 databases.
We have 2 dedicated drives for Tempdb on SAN with 50 GB space. Both tempdb data & log files are created with default size. I would like to presize them.
What are the best values to start with?
U ->Tempdbdata having tempdb.mdf file
V->Tempdblog having templog.ldf file
I receive Error: 3967, Severity: 17, State: 1. Insufficient space in tempdb to hold row versions. We have 8 data files for temp db of 10210 GB size and given 10240 GB as max size.
As MS suggest to calculate the temp db file size and growth rate we need to monitor the perform counters Free Space in Tempdb (KB) and Version Store Size (KB) in the Transactions object.
basic formula: [Size of Version Store] = 2 * [Version store data generated per minute] * [Longest running time (minutes) of your transaction
My report disk utilizations says tempdb is full ? I thonk I need a shrink for the file .
Still I am confused in calculating the size , My perform counter gives me data as such
Free Space in tempdb (KB)Â Â Â Â Â Â Â Â Â Â Â Â Â Â 279938496
Version Generation rate (KB/s)Â Â Â Â Â Â Â Â Â Â 53681040
Version Cleanup rate (KB/s)Â Â Â Â Â Â 53422320
Version Store Size (KB)Â Â Â Â Â 258720
Version Store unit count      22
Version Store unit creation                     774
Version Store unit truncation        752
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies View RelatedHi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
Hi All,
I get this error message randomly when running a stored proc that creates a bunch of temp tables with indexes. Select/Into temp tables are also done. Has anyone seen this before? Thanks.
I/O error (bad page ID) detected during read of BUF pointer = 0x14e1dbc0, page ptr = 0x7904e000, pageid = (0x1:0xdaaa), dbid = 2, status = 0x801, file = D:MSSQL7DATATEMPDB.MDF. [SQLSTATE HY000] (Error 823). The step failed.
i have problem when i run stored procedure.
"Could not allocate space for object '(SYSTEM table id: -594960911)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full."
can i change physical device "tempdb.mdf" and "tempdb.ldf" from drive c: to drive d:.
tx be4,
andi
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
Dear all,
I found an error in my NT server event log viewer that related to SQL server tempdb. The error detail is as follow:
Error Source: MSSQLServer
Type: Error
Category: Server
Description: "Error: 9002, Severity: 17, State:2"
"The log file for database 'tempdb" is full. Back up the transaction log for the database to free up some log space"
I am just wondering what is the cause of the problem and what should I do next to get rid of this problem.
Appreciated it if you can give me some idea what's the impact for this error and how to fix this problem.
Thank U very much,
Cheers,
Chris Fung,
On out SQL 6.5 server we keep getting error 1105;
Can't allocate space for object '-486' in database 'tempdb' because the 'system' segment is full.
This seems to suggest that tempdb is not large enough. However I can't see how to expand the database larger than the current 6mb. I can only expand the log, and have done so to a 1000mb. Still keep getting the same error.
Any suggestions ??
Hello friends..
We are getting below error every day.we have job Shrink TempDB which runs every hour..but once a day we are getting this error.Is this error becasue of other jobs also running by that time which uses huge resource from DB..I cant understand why???.. can any body have an idea??
Executed as user: NT AUTHORITYSYSTEM. ...97031). The PageId in the page header = (1:1056620160). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297030). The PageId in the page header = (1:-1839155936). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297029). The PageId in the page header = (1:1057229472). [SQLSTATE 42000] (Error 8909) Table error: Object ID 0, index ID 0, page ID (1:297023). The PageId in the page header = (0:0). [SQLSTATE 42000] (Error 8909) Table error: Object ID 0, index ID 0, page ID (1:297022). The PageId in the page header = (0:0). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297021). The PageId in the page header = (1:1056467424). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297015). The PageId in the page header = (2:1071640160). [SQLSTATE 42000] (Error 8909) Table error: Object ID -7207189... The step failed.
Papillon
I am using 6.5 .
Here is the error that i get
Think that tempdb is small how do i change that or what is this error about'
--------------------------
AIMSMan
---------------------------
Application-defined or object-defined error 40002
37000: [Microsoft][ODBC SQL Server Driver][SQL Server]Can't allocate space for object '##RevByNetSALIMJUMMA' in database 'tempdb' because the 'default' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.( 1105)
ODBC
I only have data and log device how do i increase the tempdb device
let me know
SEJ
Can anyone help please?
I am getting the following error:
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 162781324115968' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
Msg 9002, Level 17, State 4, Line 1
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Regards,
Krishna
*Learning IT from experience*
I keep getting the following error message when I run a serie of SQLcommands:Server: Msg 9002, Level 17, State 6, Line 15The log file for database 'tempdb' is full.Back up the transaction log for the databaseto free up some log space.I have tried "dump transaction tempdb with no_log" right before I runthe SQL command. But that doesn't help.The serie of SQL commands that I try to run is the following:create table #NewBatOp(BatchJournalID uniqueidentifier not null,batch_nr varchar(5) null,OperationNum varchar(3) null,OperationHours real null,EmployeeNum varchar(6) null,OperationDate datetime null,IsOverTime tinyint null)-- |-- Comment this one line-- | out will not triggerinsert into #NewBatOp -- <---| the errorselectbj.BatchJournalID, bj.batch_nr, bo.opno,bo.hrs, bo.bonno, bo.dat, bo.otflgfrom batop boinner join BatchJournal bj onbo.bat = bj.batch_nr andbj.BatchJournalID in(select BatchJournalID from BatchControl)if ( @@error <> 0 )goto OnErrordrop table #NewBatOpgoto EndTestOnError:drop table #NewBatOpprint "Error: Failed to import new batch-operations intojournal."EndTest:I have tried running the above statements in ISQL and in QueryAnalyzer, and I get the same error.I didn't have this problem before I have moved the database from oneserver to another server.- The OS in the old server is Windows-NT,and the SQL Server in the old server is the 2000 version.- The OS in the new server is Windows-2000,and the SQL Server in the old server is the 2000 version.The settings in tempdb in both servers are more or less the same.Actually, the tempdb in the new server is actually much bigger thanthe one in the old server. The size of the transaction logs in bothserver are the same (and cannot be changed manually). Both the dataand the transaction log of tempdb can automatically grow in 10%increment and no restriction on size.The data-and-log of the tempdb are both in one hard disk. The harddisk has 10-GB free space available. Moreover the size of the resultset from the "select" statement above is only 530KB (around 3000 rowsin the result-set). I believe it is a very small database operation.Therefore, I don't think the size has anything to do with the error.I don't think the "inner-join" clause is the cause of the problem. Thereason is that I have used the same "inner-join" clause in otherqueries, and they don't have any problem. As a matter of fact, I haveused many other queries that are far more complicated and have createdmuch bigger result set in tempdb, and they don't have this problem.I am very puzzled of this error. Can someone give me a pointer?Thanks in advance for any info.Jay Chan
View 10 Replies View Related