Snapshot Agent Won't Start

Mar 11, 2008

Hi guys,

I'm trying to set up merge replication between a SQL Server 2000 SP4 / Win2k box and a MSDE SP4/WinXP box and I'm finding that the initial snapshot isn't being produced.

The SQL Agent runs as a windows user that has admin privileges, the snapshot agent impersonates the SQL Agent. The SQL Server login for the agent account has the server role "System Administrators" and database access to all db's.

When I turn on logging and try to start the agent, the following is written to the log:
Microsoft SQL Server Snapshot Agent 8.00.760
Copyright (c) 2000 Microsoft Corporation
Microsoft SQL Server Replication Agent: SVRName-POS-POS_Test_Suburb-1

Connecting to Distributor 'SVRName'
SourceTypeId = 5
SourceName = SVRName
ErrorCode = 18456
ErrorText = Login failed for user 'SVRNameSQLAgent'.
The process could not connect to Distributor 'SVRName'.

Most of the posts I've seen regarding problems like this are due to subscriber authentication issues (not up to that, this is the initial snapshot) or windows/domain user permissions.

Any ideas what else it might be?

View 1 Replies


ADVERTISEMENT

Snapshot Agent && Log Reader Agent Will Not Start.

Nov 30, 2006

Hi All,

I would appreciate any help here at all. I am pulling my hair out!

I am unable to start the snapshot agent or log reader agent from within SQL management studio. it fails on executing step 2 with unknown username or bad password.

I have checked all account details and they are correctly using my domain admin account. I can connect to SQL using teh same account and it also has sysadmin permissions.

If i copy the step 2 paramters and start from the cmd prompt (again logged in using the same domain account) they both start fine.



Any ideas would be gratefully received.

View 1 Replies View Related

Cannot Start Log Reader Agent And Snapshot Agent

May 18, 2007

I am testing peer to peer replication in our environment. I simulated a three node peer to peer topology and a local distributor.

For some wierd reason I cannot get the Log Reader Agent and snapshot agent to start. The domain account under which SQL Server Agent runs has administrator previlage on the box. I also use a domain account for SQL Server Service. (none of the passwords changed).

This is the error I am getting - "Executed as user: abc. A required privilege is not held by the client. The step failed"

Any ideas???





Also this domain account is a member of



SQLServer2005MSSQLUsers$ServerName$MSSQLSERVER

SQLServer2005MSAgentUser$ServerName$MSSQLSERVER


View 3 Replies View Related

Snapshot Agent Cannot Start Server Execution Failed

May 22, 2006

Hello, I've configured SQL Server 2000 for merge replication and am trying to start the snapshot agent for the publication and after about 20 minutes of it trying to start, it gives up with this error.



Server execution failed

There is no more information in the event viewer. I've tried it with a bunch of different subscriptions. SQL Server and SQL Agent are running under a local account which has access to the replcation data directory. SQL Agent is running.

I'm Running SQL 2000 SP3.

Thanks

Robert Brown

View 3 Replies View Related

How To Start The Snapshot Auto?

Jun 19, 2004

I have used the script file to make a transcation repliation. All the things goes well except a bug, when the script executed over, the snapshot does not start copy at once and need me go to the enterprise manager and right click it in the replication monitor to start it, I just want to start it auto when finish executing the script . How should I do ?

View 3 Replies View Related

Snapshot Agent,

Sep 24, 2006

Dear Colleagues,

I am using Windows Server 2003 RT, and SQL Server 2005.

When Replication is performed with SQL Server Mobile. All 3 taskes i.e. Publisher creation, Article Publish, Snapshot agen starting. All are ok.

However after replication is done when checking the Status of the Snapshot Agent it is not Running, and I cannot make it Run as well.

Please advice me as to what could possibily be wrong with it, what can I do.

Thankx.

View 5 Replies View Related

Run Sql Server Snapshot Agent From Within My C#.net

Feb 3, 2006

Hello,
I need to run the sql server snapshot agent from within my c#.net 1.0 code. Regards

View 1 Replies View Related

Questions About Snapshot Agent

Jun 22, 2006

Hi, I was wondering if changing the schedule of the snapshot agent will do any effect the unc/snapshot files ? I'm now doing merge replication and i am applying snapshot from alternate location. If i change the schedule do i need to re run the snapshot agent ? I'm afraid that the current snapshot will be expired..

View 1 Replies View Related

Snapshot Agent Is On Hang

Nov 30, 2015

We have initiated reinitialize subscription by which snapshot agent is started and hanged at 26%.We have a publication of 6 articles, transactional replication, using SQL Server 2008R2.

View 3 Replies View Related

Snapshot Agent - Stopping

Jun 15, 2007

Hi am trying to create a snapshot (Merge replication) - My database is approx 6GB and one of my tables has 14.5M records - I have a total of 1500 articles to replicate.



When I start creating the snapshot - it seems to just stop on the Table that has the 14.5M records. When I delete all the data in that table it works fine. I have also check disk space and also the log files and tempdb size and all seem ok.



I am using SQL 2005 with the latest SP



Is there any form of verbose logging that I could enable to let me see what is going on





Any help would be greatly appreciated





Regards





Ants

View 2 Replies View Related

Snapshot Agent Error

Oct 14, 2007

hi, there;

I got a snapshot agent error:
[SQL-DMO]WriteFile error on '\Mysnapshotunc20071013231104Tracer_4.cft'.
(Source: Tracer (Data source); Error number: 0)

where "Tracer" is one of my tables, but it is never used.

This replication has been used for about three years without anyproblem. But suddenly I got this error.

Does anybody know what cause this and how I can fix it?

Cheers,

View 3 Replies View Related

MS SQL Server 2000 Snapshot Agent

Aug 16, 2006

Hello Sir,

Now I'm choosing Trasactional publication as my publication type. I now can successfully replicate the data from publisher to subscriber without any error.

But now my question is what is the usage of snapshot agent? When I go to Replication Monitor > Agents > Snapshot Agents > Start Agent but failed.

I need to check with you whether the way I start the snapshot agent was not correct? What is the effect if I drop snapshot agent during the replication and DBUpdate are running?

Please kindly help me .

Thank You.

View 13 Replies View Related

Snapshot Agent Retried And Failed

Aug 4, 2006

Hello, need some guidance.

I noticed that my snapshot agent never got moving at all and has been failing. It keeps on generating errors in the System Log with every retry...

The server {08B0B2D9-3FB3-11D3-A4DE-00C04F610189} did not register with DCOM within the required timeout.

and this

SubSystem Message - Job 'mws-cpmorder-CPmOrder_Mobile-2' (0x669FF0D471C2A54FA11F764B1E3B0DFD), step 2 - Server execution failed

in the application log.

Any help is appreciated.

Rgds

View 1 Replies View Related

Transactional Replication && Snapshot Agent

Jun 27, 2007

Why would you schedule a Snapshot Agent to run daily, weekly, monthly, etc. for Transactional replication when the transactions are replicated once the change is committed to the Publication database?



Does this help to replicate DDL against the Subscriber?



Thanks,

Thomas LeBlanc

View 1 Replies View Related

Snapshot Agent Error : Running

Apr 25, 2007

I have a problem when i Want to run the Snapshot Agent in SQL Server 2005. I have done all the tutorial called Replication Data with Mobile Clients and i done the previous tutorial called : Preparing the Server for Replication. But in the Lesson One i can't run the Snapshot Agent but the publicationis good. Can you help me ?
This is the error's code :


Date 25/04/2007 10:44:27
Log Job History (NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2)

Step ID 2
Server NTI-PC-118
Job Name NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2
Step Name Run agent.
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0

Message
2007-04-25 09:44:28.29 -Publisher NTI-PC-118
2007-04-25 09:44:28.29 -PublisherDB AdventureWorks
2007-04-25 09:44:28.29 -Publication AdvWorksSalesOrdersMerge
2007-04-25 09:44:28.29 -ReplicationType 2
2007-04-25 09:44:28.29 -Distributor NTI-PC-118
2007-04-25 09:44:28.29 -DistributorSecurityMode 1
2007-04-25 09:44:28.29 -XJOBID 0x893D7BB9E72044489F0A1C1878663E1D
2007-04-25 09:44:28.29 --------------------------------------
2007-04-25 09:44:28.29 Connecting to Distributor 'NTI-PC-118'
2007-04-25 09:44:28.43 The replication agent had encountered an exception.
2007-04-25 09:44:28.43 Source: Replication
2007-04-25 09:44:28.43 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2007-04-25 09:44:28.43 Exception Message: The remote server "NTI-PC-118" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
2007-04-25 09:44:28.43 Message Code: 14080
2007-04-25 09:44:28.43


Thanks you

View 4 Replies View Related

Snapshot Agent Can Not Connect To Distributor

Apr 24, 2006

I'm trying to set up merge replication between SqlServer 2000 and SqlMobile 2005. When I create the publication, I select merge replication for SqlServer CE. When I view the status of the snapshot agent, the error message is "the process could not connect to Distributor. The step failed".

I've verified both SqlServer and SqlServer Agent are running under the same domain account (with admin access to the server). This domain account has full access to the snapshot shared folder. I've also run "exec sp_helpserver", which gives me the server name for both the name and network_name fields where id=0.

I'm able to successfully set up merge replication between SqlServer 2005 and SqlMobile 2005, but my production servers are sql 2000.

View 2 Replies View Related

Transactional Replication- Snapshot Agent

Sep 7, 2006

When you create a transactional Replication.Is there a way to disable to snapshot agent scheduler. I believe that there is a way to disble it when you create a publisher.



Help ME!!!!!!!!!!!!!!!

View 3 Replies View Related

Snapshot Agent Missing Files.

Jan 16, 2007

My Snapshot Agent for SQL Server 2005 sometimes does not fully complete. I am expecting around 2073 files in the snapshot folder but only get 492 (this number does change). I have immediate_sync set to true, so I should get a full snapshot every time. It seems to quit after all data has been BCP'ed out and before the schema generation starts. I do get the "The replication agent has not logged a progress message in 10 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor are still active. " message in the MSSnapshot_history table.

I am guessing that there is some sort of blocking that is preventing the snapshot agent from continuing and then it times out and dies. But that is a total guess as I have not been able to observe the behavior, only the outcome.

Any suggestions to what the cause is or how I can fix it?

Thanks, Amy

View 4 Replies View Related

Dynamic Snapshot Agent Error

Feb 17, 2006

I am setting up a large number of Push subscribers to a single publication. because of the large number of subscribers, I am not doing the merge with agent jobs, but with SQL RMO. All works well, but from time to time I am getting a funny error when I add a event handler to the snapshotagent, to return the messages, if some feedback to the screen on how the process is getting along.

The error also happen when the process is al most done. Basically when I am not compiling in this line, then NO error.

//Add the Event Handler to receive the Status changes

DynamicSnapshotAgent.Status += AgentEvent;

But once I started getting the error, then it would not go away, sometimes if the publication & subscribers is recreated it goes away but not always, first do not use the event anymore, and at some stage I can put is back after a few succesful dynamic snapshot, then I can enable the event and it will work again........

Any help welkom

Regards

Gertus





Error:

The replication agent had encountered an exception.
Source: Unknown
Exception Type: System.InvalidOperationException
Exception Message: Operation is not valid due to the current state of the object.
Message Code: Not Applicable

View 7 Replies View Related

Unable To Get Snapshot Agent To Initialize

Feb 20, 2006

I am unable to get my snapshot agent to initialize. When I start the "View Snapshot Agent Status" and press the Start button, it appears that the snapshot agent attempts to starts and then it doesn't.

I have configured the a distribution server and need to push a replication to another database, both can connect, etc.

I used the wizard to configure the distributon server and subscription server. I am using AdventureWorks, and am attempting to replicate a single small table.

View 4 Replies View Related

Replication :: Snapshot Agent Updates Statistics

Jun 26, 2015

We have transactional replication publications from SQL 2014 to SQL 20122008 R2. When we add new tables to the existing publication and start the snapshot agent, Snapshot agent updates the statistics for random tables on the publisher DB. It appears that all the outdated statistics are being updated regardless which table is being initiated. In a highly transactional environment we can't update the statistics every time. its causing huge issues for us. Is there any work around for this ? 

View 8 Replies View Related

How To Programmatically Find Out Whether Snapshot Agent Has Finished?

Oct 15, 2007

Hi,

I want to generate a new snapshot using stored procedures. I want to wait for the snapshot files to be created and then execute a stored procedure. What's the best way to determine that the snapshot has completed successfully? I thought of doing something like:

exec msdb.dbo.sp_help_job
@job_name = @job_name
@job_aspect = 'job',
@execution_status = 1

however I can't put the results of that proc into a temp table because I get this error:
Msg 8164, Level 16, State 1, Procedure sp_get_composite_job_info, Line 72
An INSERT EXEC statement cannot be nested.

Any ideas? I'd like a T-SQL solution.

Thanks,
Mark.

View 3 Replies View Related

Trouble Getting Snapshot Agent To Initialize Publication

Nov 16, 2006

I have been trying to set up transactional replication between an OLTP SQL Server 2005 Standard edition server and a BI SQL Server 2005 Enterprise edition server. I am using a pull subscription. I was able to establish the replication from the developement server to the BI server however when I tried setting up the replication between the production environment and the BI server, using the same configuration settings, I ran into a problem. The production server had been renamed after it was initially set up. I used the sp_dropserver and sp_addserver to solve this issue and was able to run the replication wizard. However once the wizard finishes the snapshot agent doesn't initialize the publication. When I look at the replication monitor it has a status of "never run". I try to run it manually and it appears to run for a few seconds then stops and still has the status of "never run". I don't get any error messages and can't find anything in the log. I am wondering if this is related to the server rename? I am hoping to find a soultion that doesn't involve uninstalling SQL Server and reinstalling since this is a production environment.

Thanks.

View 3 Replies View Related

Snapshot Agent: Query For Data Failed

Jul 6, 2007

When running the snapshot agent for a new publication I get the message:



Message: Query for data failed
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strDataFile)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutWorkItem.DoWork(MergeSnapshotProvider snapshotProvider, IBcpOutProvider bcpOutProvider)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.WorkerThread.AgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Message: COLV_90_TO_80: Cannot convert parameter param1: Resulting colv would have too many entries.
Stack: (Source: MSSQLServer, Error number: 20005)
Get help: http://help/20005
Message: The statement has been terminated.
Stack: (Source: MSSQLServer, Error number: 3621)



The database has another publication, that was created prior to upgrade to sql server 2005 from sql server 2000 sp4. This publication is working ok, and there are no problems when running the snapshot agent for this publication.

The publications are using filtered articles, and all properties for the publications are the same.



Any help to solve this problem will be much apreciated.

View 3 Replies View Related

Merge Publication - Snapshot Agent Error - Help

Apr 19, 2007

Hi all,



I have a merge publisher with Snapshot agent for that scheduled to run everyday morning, This was runnning till yesterday. But it is not running today and giving the below error.



Can anyone help me out to solve this error? This is occuring in production environment, i really need a solution as fast as possible.


Error messages:
· Message: Failed to read column data
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strDataFile)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutWorkItem.DoWork(MergeSnapshotProvider snapshotProvider, IBcpOutProvider bcpOutProvider)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.WorkerThread.AgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
· Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
· Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
· Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)



Thanks,

Thams

View 16 Replies View Related

SQL Server 2008 :: Transactional Replication (Snapshot Agent)

Mar 19, 2015

Is there a way to force the snapshot to use a format file when bcp'ng the data to the subscriber?

The publisher and subscriber schemas are slightly different. Mainly added columns to the subscriber.

We have a post snapshot script that updates these additional columns on the subscriber.

I'd like to force the snapshot to use a format file, so it doesn't error when initially loading the data to the subscriber.

Is this possible?

View 1 Replies View Related

Snapshot Agent - Error: Query For Data Failed

Jul 8, 2005

We've got a problem with our replication. If I try to run the snapshot agent I get the message "Query for data failed".
The detail view of this message shows the following:

View 4 Replies View Related

Snapshot Agent Fails For Merge Replication Publication

Nov 9, 2006

I'm trying to setup merge replication and get the following error from the snapshot agent after I've finished the 'New Publication Wizard'. This doesn't make sense to me as it is an automatic process. Also, it looks like it is complaining about a 'dbo.MSmerge_cont...' view which is a view created automatically for the merge publication.

ERROR MESSAGE:
The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128.

FULL DETAILS:
Message: The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128.
Command Text: IF OBJECT_ID(N'[<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWCS464</ServerName><LoginName>NT AUTHORITYSYSTEM</LoginName><UserName>dbo</UserName><DatabaseName>liport2_gts</DatabaseName><SchemaName>dbo</SchemaName><ObjectName>MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90</ObjectName><ObjectType>VIEW</ObjectType><TSQLCommand><SetOptions ANSI_NULLS="OFF" ANSI_NULL_DEFAULT="ON" ANSI_PADDING="ON" QUOTED_IDENTIFIER="ON" ENCRYPTED="FALSE" /><CommandText>create view dbo.MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90 as select * from MSmerge_contents where 1 = 2</CommandText></TSQLCommand></EVENT_INSTANCE>]', 'V') IS NOT NULL DROP VIEW [<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWCS464</ServerName><LoginName>NT AUTHORITYSYSTEM</LoginName><UserName>dbo</UserName><DatabaseName>liport2_gts</DatabaseName><SchemaName>dbo</SchemaName><ObjectName>MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90</ObjectName><ObjectType>VIEW</ObjectType><TSQLCommand><SetOptions ANSI_NULLS="OFF" ANSI_NULL_DEFAULT="ON" ANSI_PADDING="ON" QUOTED_IDENTIFIER="ON" ENCRYPTED="FALSE" /><CommandText>create view dbo.MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90 as select * from MSmerge_contents where 1 = 2</CommandText></TSQLCommand></EVENT_INSTANCE>]
Parameters:
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteAdHocQueryDiscardResults(String strQuery, SqlConnection connection)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.GenerateSystemTableBcpFiles()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPostArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: 103)
Get help: http://help/103
Server XF4SWCS464, Level 15, State 4, Procedure , Line 1
The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128. (Source: MSSQLServer, Error number: 103)
Get help: http://help/103

View 3 Replies View Related

Snapshot Agent Error: String Or Binary Data Would Be Truncated

Feb 5, 2007

I'm creating a publication with a complex filter joining many tables, for replication between SQL Server 2005 and SQL Mobile 2005. Is there a limit on the number of articles, or depth of joins, in the filter? I have a working replication, but when I add another article joined to tables already in there, the snapshot agent status window gives me this error:

String or binary data would be truncated.
Cannot find the object 'MSmerge_ctsv_2C675AF5938E4EA1B7D0DCFF9ECAD9EB', because it does not exist or you do not have permission.
sp_MS_marksystemobject: Invalid object name '[dbo].[MSmerge_upd_2C675AF5938E4EA1B7

The MSmerge_ctsv... system view being referred to DOES in fact exist. But I wonder if there's an internal varchar variable used to hold the join criteria which is too short for what I'm trying to do.

Any help is always appreciated!

Dan

View 4 Replies View Related

Problem Downloading The Snapshot Agent In A Merge Pull Subscription.

Jun 21, 2007

Hello.

I've been having an error when downloading the snapshot agent from our Publisher.

The articles selected are all the tables and all the stored procedures.

The Subscription is created programmatically and so is the synchronization. When trying to synchronize for the first time and when the subscriber tries to download the snapshot I have the following error:




Error messages:
The schema script 'Distrito_2.sch' could not be propagated to the subscriber. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
Get help: http://help/MSSQL_REPL-2147201001
The process could not read file 'GESZifuncAFRODITE$SILVITEST_GESZIF_GESZIF20070621182845Distrito_2.sch' due to OS error 3. (Source: MSSQL_REPL, Error number: MSSQL_REPL20143)
Get help: http://help/MSSQL_REPL20143
The system cannot find the path specified.
(Source: MSSQL_REPL, Error number: MSSQL_REPL3)
Get help: http://help/MSSQL_REPL3



The snapshot folder is at c:GESZifSnapshotFolder and the unc is \AfroditeSnapshot.

I'm getting a little desperate with this because we really need to propagate the schema changes around the subscribers.

Thanks in advance,

AVD

View 4 Replies View Related

Oracle 9i -&&> SQL Server 2005: Snapshot Agent Aborts Suddenly Uninterrupted

Jun 14, 2006

Hi - I hope some of you can help me with this problem.

I'm trying to run the snapshot agent for 77 published tables, but the agent stops suddenly uninterrupted. It stops in the middle of taking a snapshot of a table containing 81,719,531 rows. The error message is pasted below.

Message
2006-06-14 05:33:33.53 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57200000 total rows copied)
2006-06-14 05:34:12.57 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57300000 total rows copied)
2006-06-14 05:34:51.23 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57400000 total rows copied)
2006-06-14 05:35:29.99 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57500000 total rows copied)
2006-06-14 05:36:09.82 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57600000 total rows copied)
2006-06-14 05:36:49.38 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57700000 total rows copied)
2006-06-14 05:37:28.56 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57800000 total rows copied)
2006-06-14 05:37:35.36 [89%] The replication agent was shut down in response to an abort request.


Does anyone know what is causing this error and how I can possibly solve it?

Best Regards,
JB Plum

View 14 Replies View Related

Start A SQL Agent Job!!!!

Aug 21, 2001

Hello everyone,

Any ideas of how to start a SQL Agent job, from OTHER-THAN Enterprise Manager !!!

Does Microsoft provide any stored procs, extended procs or any SDK that can help me force-start a scheduled task ?

There has got to be a way, coz' Enterprise Manager is doing it !!!!..

Any help is greately appreciated.

Thanks..

View 3 Replies View Related

SQL Agent Does Not Start

Nov 16, 2007

I changed my server's service account to Domainsqladmin and the service started successfully.

I did the same for SQL Agent but the service starts and stops. In Event Viewer saw this error:

SQLServerAgent could not be started (reason: SQLServerAgent must be able to connect to SQLServer as SysAdmin, but '(Unknown)' is not a member of the SysAdmin role).

I checked Logins under under security in SSMS and the Domainsqladmin is a member of SysAdmin roles. What's wrong?

Canada DBA

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved