Hi,
I need to be able to create a Stored Procedure that gets its information based on dates stored in another table.
Does anyone have an idea on how I can acheive this??
Regards..
Peter.
Could someone help me get this stored procedure to work? I want to give the stored procedure a long list of departments and have them added to a temp table. This only gets the first dept. in the temp table. I'm confused. Open to other suggestions, but want to use a 1col temp table to hold the depts.
After this is done, an SQL query is run using the temp table.
Input for test:
--csi_crystal_xxxx "pc9xp,pc8,pc7,pc6,pc6543,pc945678"
--select * from ##CrystalGetCosts
create procedure csi_crystal_xxxx
@DeptResp varchar(4000)
AS
SET NOCOUNT ON
DECLARE @SQL varchar(8000)
DECLARE @Dept varchar(10)
DECLARE @iLen int
DECLARE @iPtr int
DECLARE @iEnd int
If Exists (Select name, Type From [tempdb]..[sysobjects]
where name = '##CrystalGetCosts' And Type = 'U')
Drop table ##CrystalGetCosts
CREATE TABLE ##CrystalGetCosts (Dept_Resp_No varchar(10))
Set @iLen=Len(@DeptResp)
Set @iPtr = 1
While @iPtr < @iLen
BEGIN
SET @iEND = charindex(',',@DeptResp,@iPtr)
Set @Dept= Substring (@DeptResp,@iPtr,@iEnd-1)
INSERT INTO ##CrystalGetCosts Values (@Dept)
Set @iPtr = @iEnd + @iLen
END
Hi everyone,
Is that possible to passing a table as an input to Stored Procedure?
Thanks in advance
I have the following Query.
SELECT CAST(DEL_INTERCOMPANYRETURNACTIONID AS NVARCHAR(4000)) COLLATE DATABASE_DEFAULT AS DEL_INTERCOMPANYRETURNACTIONID, 'SRC_AX.PURCHLINE.DEL_INTERCOMPANYRETURNACTIONID' FROM SRC_AX.PURCHLINE WHERE DEL_INTERCOMPANYRETURNACTIONID IS NULL UNION
SELECT CAST(DEL_INTERCOMPANYRETURNACTIONID AS NVARCHAR(4000)) COLLATE DATABASE_DEFAULT AS DEL_INTERCOMPANYRETURNACTIONID, 'SRC_AX.SALESLINE.DEL_INTERCOMPANYRETURNACTIONID'
[Code] .....
My tabel is HST_MASTER.Control.
I want to have this query in a stored procedure. What syntax stored procedure i need to make to fill my table.
This should be relatively easy but for some reason it isn't. I'm trying to simply add parameters to a stored procedure that performs a simple input and I can't do it... I keep getting an error that the parameters are not found when I am explicitly stating them. I could do this with VB ASP.NET 1.x but with all these radical changes with 2.0, I'm pulling my hair out.... I can get to work if I declare a sqlStatement in the code but don't want to go that route (but will if there is no other choice) Any help would be great:
Code:
Dim cmd As New SqlDataSource
cmd.InsertCommandType = SqlDataSourceCommandType.StoredProcedure
cmd.InsertParameters.Add("@firstName", txtFirstName.Text)
cmd.InsertParameters.Add("@lastName", txtLastName.Text)
cmd.InsertParameters.Add("@address1", txtAddress1.Text)
cmd.InsertParameters.Add("@address2", txtaddress2.Text)
cmd.InsertParameters.Add("@city", txtCity.Text)
cmd.InsertParameters.Add("@state", ddlState.SelectedItem.Value)
cmd.InsertParameters.Add("@zipCode", txtZipCode.Text)
cmd.InsertParameters.Add("@telephone", txtTelephone.Text)
cmd.InsertParameters.Add("@email", txtEmail.Text)
cmd.InsertParameters.Add("@agegroup", ddlAgeGroup.SelectedItem.Value)
cmd.InsertParameters.Add("@birthday", txtBirthday.Text)
cmd.InsertParameters.Add("@emailnotification", rbEmail.SelectedItem.Value)
cmd.InsertParameters.Add("@magazine", rbEmail.SelectedItem.Value)
cmd.InsertParameters.Add("@question", txtquestion.Text)
cmd.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True"
cmd.InsertCommand = "sp_insertCustomer"
cmd.Insert()
Stored Procedure:
CREATE PROCEDURE dbo.sp_insertCustomer @firstName nchar(30),@lastName nchar(30),@address1 nchar(50),@address2 nchar(50),@city nchar(30),@state nchar(2),@zipcode nchar(10),@telephone nchar(10),@email nchar(50),@ageGroup int,@birthday dateTime,@emailNotification int,@magazine int,@question varchar(1000)
AS
INSERT tblCustomer
(firstName,lastName,address1,address2,city,state,zipCode,telephone,email,ageGroup,birthday,emailNotification,magazine,question)
Values(@firstName,@lastName,@address1,@address2,@city,@state,@zipcode,@telephone,@email,@ageGroup,@birthday,@emailNotification,@magazine,@question)
ERROR:
Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied.
Source Error:
Line 24: cmd.InsertCommand = "sp_insertCustomer"Line 25: Line 26: cmd.Insert()Line 27: Line 28:
I am trying to Execute a Stored Procedure using Call OSQL from a .bat file, and passing a DOS variable to the Stored Procedure.
The DOS variable is established in the DOS command...
set SERVERJOB=JOBNAME
I have tried...
EXEC sp_procedure %SERVERJOB%
With this, I get an error...
sg 170, Level 15, State 1, Server ABCDEFGH, Line 20
Line 20: Incorrect syntax near '%'.
If I put the variable name in quotes on the EXEC statement above, the value used is the variable name, %SERVERJOB% itself rather than the value the variable was set to, which would be JOBNAME in the above example.
Any ideas??? Thanks!
Hi,
I want to convert a SQL query as shown below into a stored procedure:
select name
from namelist
where town in ('A','B','D')
If I want to make the town as the input variable into the stored procedure, how should I declare the stored procedure? As far as I know, stored procedure could only handle individual values, and not a range of values.
Thanks.
I am trying to send XML as an input parameter for a stored procedure. I have seen many articles that do a good job of describing different variations but all the examples show the stored procedure only pulling one value (field) per record from the XML input. I need to pull 3 fields for each record.
Here is an example of the XML being passed:
<object>
<property @propID="14" @propType="4" @propValue="Blah blah text" />
<property @propID="217" @propType="2" @propValue="Some other text" />
</object>
I have a table like this in my database:
CREATE TABLE SCENE_PROPERTY_LINK (ID INT, OBJ_ID INT, PROPERTY_ID INT, PROPERTY_VALUE NTEXT)
and I want a stored procedure that will accept XML and update this table.
Here is what I am trying:
CREATE PROCEDURE sp_UpdateObject
@inValues XML
AS
BEGIN
--create a temporary table
DECLARE @props TABLE(PROPID INT, PROPTYPE INT, PROPVALUE NTEXT)
--And then insert the values from the @inValues XML argument into the temporary table
--I am sure the SELECT statement is VERY wrong
INSERT INTO @props(PROPID, PROPTYPE, PROPVALUE)
SELECT @inValues('@propID', INT), @inValues('@propType', INT), @inValues('@propValue', NTEXT)
FROM @inValues.nodes('/object/property')
--...and then I will use the temp table to update the DB table (SCENE_PROPERTY_LINK) for each record where SCENE_PROPERTY_LINK.PROPERTY_ID = @props.PROPID
AND @props.PROPTYPE != 6
END
I am sure it would be more efficient to update the DB table directly from the XML argument, without using the temporary table. But, I will settle for this solution using the temp table. I have done some work creating XML output from several stored procedures but, this is the first time I have been faced with consuming XML input in SQL.
I apologize for the long post.
Thanks in advance for any help you can provide.
I am facing a problem while i pass xml as an intput to stored procedure.
The problem is that there are ceratin special characters which when used as a part of xml give error.Like the input which i give to my sp is :
Declare @XMLString XML
Set @XMLString = N'<Company CompanyName = "Hilary Group & Sons" Code = "HGS" >
</Company>'
Exec sproc_Insert_Company @XMLString
The error which i get on execution is: Msg 9421, Level 16, State 1, Line 2
XML parsing: line 2, character 34, illegal name character..
Its being generated because of the '&' being used in CompanyName.
In my sp i m using it as : .
Insert Into Company(
CompanyName,
Code,
)
Output Inserted.CompanyId Into @tbl
-- TurnOver,
-- NetIncome,
-- YrOfIncorporation,
SELECT
CompanyName = ParamValues.Item.value( '@CompanyName' , 'varchar(101)'),
Code = ParamValues.Item.value( '@Code' , 'varchar(6)'),
FROM @XMLString.nodes('Company') AS ParamValues(Item)
Its not only this but there are other special characters which create problem like '@' and many more...
How to resolve it??
plzz do help at the earliest...
Hi All,
I have a project which will be a tools to edit different tables.
Now I need a stored_procedure to select data from different table.
For example I have a table name "TableFields" which have "tableID","FieldName", "DataType"and so on columns.
It has the following records.
"1","EmployeeID","Varchar"
"1","FirstName","varchar"
"1","LastName","varchar"
"1", "EmployedDate","date"
It has the following records.
"2","AddressID","int"
"2","ApartNo","varchar"
"2", "Address","varchar"
Then I have table named "Employee" has columns "employeeID","FirstName","LastName","EmployedDate" which have the following data,
"001","Susan","Daka","1999-09-09",
"002","Lisa","Marzs","1999-08-08",
"003","David","Smith","2000-01-01",
I also have address table has columns "AddressID","ApartNo","Address" and has the following data
"1","1101","1208 Mornelle Crt, Toronto",
"2","1209","1940 Garden Drive, Toronto"
I need to create a stored procedure to select data from table "employee " or table "address" or even other tables according to information from "TableFields."
So the table's name can be know as a input parameter, but the fields name will be a list of values and it all depends on tables.
I want to use fields name as a long string separated by",", like I have input "EmployeeID, FirstName,LastName" as an input parameter. But I don't know how to split the string.
Second, I need to create a stored procedure to insert or update data into these dynamically table.
Can anyone help me?
Thanks in advance.
Hi,
i wanna know if i can use a vector (or an array) for input parameter to a Stored Procedure? Can anyone give me example or links?
thanks
I have a stored procedure that takes an input string parameter defined as @name nvarchar(24). The stored procedure takes this string and insert it into a table with the column also defined as nvarchar(24). When I execute this stored procedure with a string of more than 24 characters, the input string somehow get truncated and inserted successfully into the table without giving an error. Why is this the case?
If I simply execute an insert statement with a string longer than 24 characters, it will give me an error message. I tried enclosing the insert statement with a try-catch block in the stored procedure but I still can't trap any error.
Any suggestions?
if i send the string
2,3,4,5 to a stored procedure...
is there a way i could split those values for input into the database? no, right? i would need a seperate stored procedure that would take each value one at a time...correct?
could someone please let me know if i am declaring the parameter wrong or have the wrong VB CODE. I receive my 3 column headers in my datagrid but the parameter isn't doing anything
STORED PROCEDURE
CREATE PROCEDURE USP_Machcusidsearch
@Machcusid nvarchar OUTPUTAS
SELECT dbo.Machine.machcustomID, dbo.Problem.ProblemDesc, dbo.Request.ReqDateFROM dbo.Machine INNER JOIN dbo.Request ON dbo.Machine.machID = dbo.Request.MachID INNER JOIN dbo.Problem ON dbo.Request.ProblemID = dbo.Problem.ProblemIDwhere machcustomID = @MachcusidGO
VB.NET CODE
Private Sub LSBmachcusid_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LSBmachcusid.SelectedIndexChanged
SqlDataAdapter2.Fill(DsMachcusidsearch1)
SqlSelectCommand2.Parameters("@Machcusid").Value = LSBmachcusid.SelectedItem.Value
DGstatussearch.DataBind()
End Sub
End Class
I've been tasked with creating a stored procedure which will be executed after a user has input one or more parameters into some search fields. So they could enter their 'order_reference' on its own or combine it with 'addressline1' and so on.
What would be the most proficient way of achieving this?
I had initially looked at using IF, TRY ie:
IF @SearchField= 'order_reference'
BEGIN TRY
select data
from mytables
END TRY
However I'm not sure this is the most efficient way to handle this.
my stored procedure is
create procedure t1 (@a int,@b int,@c int,@d int,@e int,@f int)
as
begin
select no,name,department from emp where a = @a and b =@b orc =@c or
d = @d or e = @e or f = @f
end
my problem is while executing i may get null values as input to the stored procedure .
how to validate them ? any ideas .
are there any arrays.
if c and d are null then my condition would be
where a = @a and b =@b or e = @e or f = @f
how many loops shall i have to write.
Is it possible to have an entire sql select statement as the input variable to a stored procedure? I want the stored procedure to execute the select statement.
ie.
exec sp_SomeFunc 'select * from table1 where id=1'
It may sound weird, but I have my reason for wanting to do it this way. Is this possible? if so, how do I implement this inside the stored procedure?
Hi,
I have 2 source tables emp_ass,aprvl_status these tables are not having common column to join. and 1 target table Time_Card, i have a stored procedure with 4 input parameters, emp_ass_id,status_id,start date,end date,i am inserting data into timecard based on emp_ass_id, my week start date is sunday and end date is saterday if emp start date is sunday i am just incremnting the start date by 7 days as end date is saterday and inserting that row, if employe statrt date is other than Sunday. i am just insering start date with to reach end date saterday, this work fine when i give the input parameters, now my reqirement is i need to automate this process as i need to get new emp_ass_id which is not in target table and insert his records based on his start date and end date,
ex:
if emp_ass_id is 1001, start date 1/1/2008 and end date is 2/1/2008 then i need to insert
Uniq_Id, emp_ass_id, start_date end_date status_id
1099
1001
1/1/2008 12:00:00 AM
1/5/2008 12:00:00 AM 1
1100
1001
1/6/2008 12:00:00 AM
1/12/2008 12:00:00 AM 1
1101
1001
1/13/2008 12:00:00 AM
1/19/2008 12:00:00 AM 1
1102
1001
1/20/2008 12:00:00 AM
1/26/2008 12:00:00 AM 1
1103
1001
1/27/2008 12:00:00 AM
2/2/2008 12:00:00 AM 1
the stored procedure will insert these records if i give the input parameters, now i need to automate this process by using SSIS. please help me,i need to get emp_ass_id,start_date,end_date dynamically from source table if emp_ass_id is not in target table.
Thanks in advance.
Hi
I have this procedure it is creating the proc but when I execute it gives error
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@ID".
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@nextCode".
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[GetNextAction]
(
@Code char(10),
@Track varchar(30)
)
AS
BEGIN
SET NOCOUNT ON;
Declare @ID int;
DECLARE @SQL1 VARCHAR(2000)
SET @SQL1='Select @ID = Sequence from'+' '+ @Track+ ' where Code=@Code'
EXEC(@SQL1);
Declare @nextCode varchar;
DECLARE @SQL2 VARCHAR(2000)
SET @SQL2 ='Select @nextCode= Code from '+' '+ @Track+ ' where sequence =(@ID+1)'
EXEC(@SQL2);
Declare @NextAction varchar(30);
Select @NextAction= nextAction from [dbo].[CaseStage] where Code=@nextCode;
Select @NextAction;
END
GO
Can someone correct me here
Thanks
Is there any way to use table variable as input to a function or stored procedure?
View 3 Replies View RelatedI'm seeing where previous developers have used a single stored procedure for multiple reports, where each report required different columns to be returned. They are structured like this:
CREATE PROCEDURE dbo.GetSomeData (@rptType INT, @customerID INT)
AS
BEGIN
IF @rptType = 1
BEGIN
SELECT LastName, FirstName, MiddleInitial
[Code] ....
As you can see, the output depends on the given report type. I've personally never done this, but that's more because it's the way I learned as opposed to any hard facts to support it.
So what I'm looking for is basically 2-fold.
Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :
CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'
AS
BEGIN
DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'
EXECUTE sp_executesql @B
END
GO
Hi all,
In a Database "AP" of my SQL Server Management Studio Express (SSMSE), I have a stored procedure "spInvTotal3":
CREATE PROC [dbo].[spInvTotal3]
@InvTotal money OUTPUT,
@DateVar smalldatetime = NULL,
@VendorVar varchar(40) = '%'
This stored procedure "spInvTotal3" worked nicely and I got the Results: My Invoice Total = $2,211.01 in
my SSMSE by using either of 2 sets of the following EXEC code:
(1)
USE AP
GO
--Code that passes the parameters by position
DECLARE @MyInvTotal money
EXEC spInvTotal3 @MyInvTotal OUTPUT, '2006-06-01', 'P%'
PRINT 'My Invoice Total = $' + CONVERT(varchar,@MyInvTotal,1)
GO
(2)
USE AP
GO
DECLARE @InvTotal as money
EXEC spInvTotal3
@InvTotal = @InvTotal OUTPUT,
@DateVar = '2006-06-01',
@VendorVar = '%'
SELECT @InvTotal
GO
////////////////////////////////////////////////////////////////////////////////////////////
Now, I want to print out the result of @InvTotal OUTPUT in the Windows Application of my ADO.NET 2.0-VB 2005 Express programming. I have created a project "spInvTotal.vb" in my VB 2005 Express with the following code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub printMyInvTotal()
Dim connectionString As String = "Data Source=.SQLEXPRESS; Initial Catalog=AP; Integrated Security=SSPI;"
Dim conn As SqlConnection = New SqlConnection(connectionString)
Try
conn.Open()
Dim cmd As New SqlCommand
cmd.Connection = conn
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "[dbo].[spInvTotal3]"
Dim param As New SqlParameter("@InvTotal", SqlDbType.Money)
param.Direction = ParameterDirection.Output
cmd.Parameters.Add(param)
cmd.ExecuteNonQuery()
'Print out the InvTotal in TextBox1
TextBox1.Text = param.Value
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
conn.Close()
End Try
End Sub
End Class
/////////////////////////////////////////////////////////////////////
I executed the above code and I got no errors, no warnings and no output in the TextBox1 for the result of "InvTotal"!!??
I have 4 questions to ask for solving the problems in this project:
#1 Question: I do not know how to do the "DataBinding" for "Name" in the "Text.Box1".
How can I do it?
#2 Question: Did I set the CommandType property of the command object to
CommandType.StoredProcedure correctly?
#3 Question: How can I define the 1 output parameter (@InvTotal) and
2 input parameters (@DateVar and @VendorVar), add them to
the Parameters Collection of the command object, and set their values
before I execute the command?
#4 Question: If I miss anything in print out the result for this project, what do I miss?
Please help and advise.
Thanks in advance,
Scott Chang
which is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies View RelatedJust wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.
View 2 Replies View RelatedCan I invoke stored procedure stored inside from a user defined table column?
View 5 Replies View RelatedHello to all!
I have a table name stored in a scalar variable (input parameter of my stored procedure). I need to run SQL statement: SELECT COUNT (*) FROM MyTable and store the result of my query in a scalar variable:
For example:
declare @countRows int
set @countRows = (select count(*) from MyTable)
The problem is that the name of MyTable is stored in the input variable of my stored procedure and of corse this does not work:
declare @countRows int
set @countRows = (select count(*) from @myTableName)
I also tried this:
declare @sqlQuery varchar(100)
set @sqlQuery = 'select count(*) from ' + @myTableName
set @countRows = exec(@sqlQuery)
But it looks like function exec() does not return any value...
Any idea how to solve this problem?
Thanx,
Ziga
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
Here is the scenario,
I have 2 stored procedures, SP1 and SP2
SP1 has the following code:
declare @tmp as varchar(300)
set @tmp = 'SELECT * FROM
OPENROWSET ( ''SQLOLEDB'', ''SERVER=.;Trusted_Connection=yes'',
''SET FMTONLY OFF EXEC ' + db_name() + '..StoredProcedure'' )'
EXEC (@tmp)
SP2 has the following code:
SELECT *
FROM SP1 (which won't work because SP1 is a stored procedure. A view, a table valued function, or a temporary table must be used for this)
Views - can't use a view because they don't allow dynamic sql and the db_name() in the OPENROWSET function must be used.
Temp Tables - can't use these because it would cause a large hit on system performance due to the frequency SP2 and others like it will be used.
Functions - My last resort is to use a table valued function as shown:
FUNCTION MyFunction
( )
RETURNS @retTable
(
@Field1 int,
@Field2 varchar(50)
)
AS
BEGIN
-- the problem here is that I need to call SP1 and assign it's resulting data into the
-- @retTable variable
-- this statement is incorrect, but it's meaning is my goal
INSERT @retTableSELECT *FROM SP1
RETURN
END
My Pocket PC application exports signature as an image. Everything is fine when choose Use SQL statements in TableAdapter Configuration Wizard.
main.ds.MailsSignature.Clear();
main.ds.MailsSignature.AcceptChanges();
string[] signFiles = Directory.GetFiles(Settings.signDirectory);
foreach (string signFile in signFiles)
{
mailsSignatureRow = main.ds.MailsSignature.NewMailsSignatureRow();
mailsSignatureRow.Singnature = GetImageBytes(signFile); //return byte[] array of the image.
main.ds.MailsSignature.Rows.Add(mailsSignatureRow);
}
mailsSignatureTableAdapter.Update(main.ds.MailsSignature);
But now I am getting error "General Network Error. Check your network documentation" after specifying Use existing stored procedure in TableAdpater Configuration Wizard.
ALTER PROCEDURE dbo.Insert_MailSignature( @Singnature image )
AS
SET NOCOUNT OFF;
INSERT INTO MailsSignature (Singnature) VALUES (@Singnature);
SELECT Id, Singnature FROM MailsSignature WHERE (Id = SCOPE_IDENTITY())
For testing I created a desktop application and found that the same Code, same(Use existing stored procedure in TableAdpater Configuration Wizard) and same stored procedure is working fine in inserting image into the table.
Is there any limitation in CF?
Regards,
Professor Corrie.
I am working with the following two tables:
Category(NewID,OldID)
Link(CategoryID,BusinessID)
All fields are of Integer Type.
I need to write a stored procedure in sql 2000 which works as follows:
Select all the NewID and OldID from the Category Table
(SELECT NewID,OldID FROM Category)
Then for each rows fetched from last query, execute a update query in the Link table.
For Example,
Let @NID be the NewID for each rows and @OID be the OldID for each rows.
Then the query for each row should be..
UPDATE Link SET CategoryID=@CID WHERE CategoryID=@OID
Please help me with the code.
Thanks,
anisysnet
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
Hi, How can I store a stored procedure's results(returning dataset) intoa table?Bob*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View Related