Problem With Xml As Input To Stored Procedure
Sep 11, 2007
I am facing a problem while i pass xml as an intput to stored procedure.
The problem is that there are ceratin special characters which when used as a part of xml give error.Like the input which i give to my sp is :
Declare @XMLString XML
Set @XMLString = N'<Company CompanyName = "Hilary Group & Sons" Code = "HGS" >
</Company>'
Exec sproc_Insert_Company @XMLString
The error which i get on execution is: Msg 9421, Level 16, State 1, Line 2
XML parsing: line 2, character 34, illegal name character..
Its being generated because of the '&' being used in CompanyName.
In my sp i m using it as : .
Insert Into Company(
CompanyName,
Code,
)
Output Inserted.CompanyId Into @tbl
-- TurnOver,
-- NetIncome,
-- YrOfIncorporation,
SELECT
CompanyName = ParamValues.Item.value( '@CompanyName' , 'varchar(101)'),
Code = ParamValues.Item.value( '@Code' , 'varchar(6)'),
FROM @XMLString.nodes('Company') AS ParamValues(Item)
Its not only this but there are other special characters which create problem like '@' and many more...
How to resolve it??
plzz do help at the earliest...
View 6 Replies
ADVERTISEMENT
Apr 25, 2006
Hi, I need to be able to create a Stored Procedure that gets its information based on dates stored in another table.Does anyone have an idea on how I can acheive this??Regards..Peter.
View 2 Replies
View Related
Jun 13, 2006
This should be relatively easy but for some reason it isn't. I'm trying to simply add parameters to a stored procedure that performs a simple input and I can't do it... I keep getting an error that the parameters are not found when I am explicitly stating them. I could do this with VB ASP.NET 1.x but with all these radical changes with 2.0, I'm pulling my hair out.... I can get to work if I declare a sqlStatement in the code but don't want to go that route (but will if there is no other choice) Any help would be great:
Code:
Dim cmd As New SqlDataSource
cmd.InsertCommandType = SqlDataSourceCommandType.StoredProcedure
cmd.InsertParameters.Add("@firstName", txtFirstName.Text)
cmd.InsertParameters.Add("@lastName", txtLastName.Text)
cmd.InsertParameters.Add("@address1", txtAddress1.Text)
cmd.InsertParameters.Add("@address2", txtaddress2.Text)
cmd.InsertParameters.Add("@city", txtCity.Text)
cmd.InsertParameters.Add("@state", ddlState.SelectedItem.Value)
cmd.InsertParameters.Add("@zipCode", txtZipCode.Text)
cmd.InsertParameters.Add("@telephone", txtTelephone.Text)
cmd.InsertParameters.Add("@email", txtEmail.Text)
cmd.InsertParameters.Add("@agegroup", ddlAgeGroup.SelectedItem.Value)
cmd.InsertParameters.Add("@birthday", txtBirthday.Text)
cmd.InsertParameters.Add("@emailnotification", rbEmail.SelectedItem.Value)
cmd.InsertParameters.Add("@magazine", rbEmail.SelectedItem.Value)
cmd.InsertParameters.Add("@question", txtquestion.Text)
cmd.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True"
cmd.InsertCommand = "sp_insertCustomer"
cmd.Insert()
Stored Procedure:
CREATE PROCEDURE dbo.sp_insertCustomer @firstName nchar(30),@lastName nchar(30),@address1 nchar(50),@address2 nchar(50),@city nchar(30),@state nchar(2),@zipcode nchar(10),@telephone nchar(10),@email nchar(50),@ageGroup int,@birthday dateTime,@emailNotification int,@magazine int,@question varchar(1000)
AS
INSERT tblCustomer
(firstName,lastName,address1,address2,city,state,zipCode,telephone,email,ageGroup,birthday,emailNotification,magazine,question)
Values(@firstName,@lastName,@address1,@address2,@city,@state,@zipcode,@telephone,@email,@ageGroup,@birthday,@emailNotification,@magazine,@question)
ERROR:
Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied.
Source Error:
Line 24: cmd.InsertCommand = "sp_insertCustomer"Line 25: Line 26: cmd.Insert()Line 27: Line 28:
View 5 Replies
View Related
May 4, 2004
I am trying to Execute a Stored Procedure using Call OSQL from a .bat file, and passing a DOS variable to the Stored Procedure.
The DOS variable is established in the DOS command...
set SERVERJOB=JOBNAME
I have tried...
EXEC sp_procedure %SERVERJOB%
With this, I get an error...
sg 170, Level 15, State 1, Server ABCDEFGH, Line 20
Line 20: Incorrect syntax near '%'.
If I put the variable name in quotes on the EXEC statement above, the value used is the variable name, %SERVERJOB% itself rather than the value the variable was set to, which would be JOBNAME in the above example.
Any ideas??? Thanks!
View 2 Replies
View Related
Feb 9, 2006
Hi,
I want to convert a SQL query as shown below into a stored procedure:
select name
from namelist
where town in ('A','B','D')
If I want to make the town as the input variable into the stored procedure, how should I declare the stored procedure? As far as I know, stored procedure could only handle individual values, and not a range of values.
Thanks.
View 5 Replies
View Related
Mar 9, 2008
I am trying to send XML as an input parameter for a stored procedure. I have seen many articles that do a good job of describing different variations but all the examples show the stored procedure only pulling one value (field) per record from the XML input. I need to pull 3 fields for each record.
Here is an example of the XML being passed:
<object>
<property @propID="14" @propType="4" @propValue="Blah blah text" />
<property @propID="217" @propType="2" @propValue="Some other text" />
</object>
I have a table like this in my database:
CREATE TABLE SCENE_PROPERTY_LINK (ID INT, OBJ_ID INT, PROPERTY_ID INT, PROPERTY_VALUE NTEXT)
and I want a stored procedure that will accept XML and update this table.
Here is what I am trying:
CREATE PROCEDURE sp_UpdateObject
@inValues XML
AS
BEGIN
--create a temporary table
DECLARE @props TABLE(PROPID INT, PROPTYPE INT, PROPVALUE NTEXT)
--And then insert the values from the @inValues XML argument into the temporary table
--I am sure the SELECT statement is VERY wrong
INSERT INTO @props(PROPID, PROPTYPE, PROPVALUE)
SELECT @inValues('@propID', INT), @inValues('@propType', INT), @inValues('@propValue', NTEXT)
FROM @inValues.nodes('/object/property')
--...and then I will use the temp table to update the DB table (SCENE_PROPERTY_LINK) for each record where SCENE_PROPERTY_LINK.PROPERTY_ID = @props.PROPID
AND @props.PROPTYPE != 6
END
I am sure it would be more efficient to update the DB table directly from the XML argument, without using the temporary table. But, I will settle for this solution using the temp table. I have done some work creating XML output from several stored procedures but, this is the first time I have been faced with consuming XML input in SQL.
I apologize for the long post.
Thanks in advance for any help you can provide.
View 4 Replies
View Related
Jan 10, 2008
Hi All,
I have a project which will be a tools to edit different tables.
Now I need a stored_procedure to select data from different table.
For example I have a table name "TableFields" which have "tableID","FieldName", "DataType"and so on columns.
It has the following records.
"1","EmployeeID","Varchar"
"1","FirstName","varchar"
"1","LastName","varchar"
"1", "EmployedDate","date"
It has the following records.
"2","AddressID","int"
"2","ApartNo","varchar"
"2", "Address","varchar"
Then I have table named "Employee" has columns "employeeID","FirstName","LastName","EmployedDate" which have the following data,
"001","Susan","Daka","1999-09-09",
"002","Lisa","Marzs","1999-08-08",
"003","David","Smith","2000-01-01",
I also have address table has columns "AddressID","ApartNo","Address" and has the following data
"1","1101","1208 Mornelle Crt, Toronto",
"2","1209","1940 Garden Drive, Toronto"
I need to create a stored procedure to select data from table "employee " or table "address" or even other tables according to information from "TableFields."
So the table's name can be know as a input parameter, but the fields name will be a list of values and it all depends on tables.
I want to use fields name as a long string separated by",", like I have input "EmployeeID, FirstName,LastName" as an input parameter. But I don't know how to split the string.
Second, I need to create a stored procedure to insert or update data into these dynamically table.
Can anyone help me?
Thanks in advance.
View 8 Replies
View Related
Feb 11, 2001
Could someone help me get this stored procedure to work? I want to give the stored procedure a long list of departments and have them added to a temp table. This only gets the first dept. in the temp table. I'm confused. Open to other suggestions, but want to use a 1col temp table to hold the depts.
After this is done, an SQL query is run using the temp table.
Input for test:
--csi_crystal_xxxx "pc9xp,pc8,pc7,pc6,pc6543,pc945678"
--select * from ##CrystalGetCosts
create procedure csi_crystal_xxxx
@DeptResp varchar(4000)
AS
SET NOCOUNT ON
DECLARE @SQL varchar(8000)
DECLARE @Dept varchar(10)
DECLARE @iLen int
DECLARE @iPtr int
DECLARE @iEnd int
If Exists (Select name, Type From [tempdb]..[sysobjects]
where name = '##CrystalGetCosts' And Type = 'U')
Drop table ##CrystalGetCosts
CREATE TABLE ##CrystalGetCosts (Dept_Resp_No varchar(10))
Set @iLen=Len(@DeptResp)
Set @iPtr = 1
While @iPtr < @iLen
BEGIN
SET @iEND = charindex(',',@DeptResp,@iPtr)
Set @Dept= Substring (@DeptResp,@iPtr,@iEnd-1)
INSERT INTO ##CrystalGetCosts Values (@Dept)
Set @iPtr = @iEnd + @iLen
END
View 1 Replies
View Related
Jun 18, 2008
Hi everyone,
Is that possible to passing a table as an input to Stored Procedure?
Thanks in advance
View 1 Replies
View Related
Jul 18, 2006
Hi,
i wanna know if i can use a vector (or an array) for input parameter to a Stored Procedure? Can anyone give me example or links?
thanks
View 1 Replies
View Related
Jan 23, 2008
I have a stored procedure that takes an input string parameter defined as @name nvarchar(24). The stored procedure takes this string and insert it into a table with the column also defined as nvarchar(24). When I execute this stored procedure with a string of more than 24 characters, the input string somehow get truncated and inserted successfully into the table without giving an error. Why is this the case?
If I simply execute an insert statement with a string longer than 24 characters, it will give me an error message. I tried enclosing the insert statement with a try-catch block in the stored procedure but I still can't trap any error.
Any suggestions?
View 10 Replies
View Related
Jun 28, 2004
if i send the string
2,3,4,5 to a stored procedure...
is there a way i could split those values for input into the database? no, right? i would need a seperate stored procedure that would take each value one at a time...correct?
View 7 Replies
View Related
Dec 9, 2005
could someone please let me know if i am declaring the parameter wrong or have the wrong VB CODE. I receive my 3 column headers in my datagrid but the parameter isn't doing anything
STORED PROCEDURE
CREATE PROCEDURE USP_Machcusidsearch
@Machcusid nvarchar OUTPUTAS
SELECT dbo.Machine.machcustomID, dbo.Problem.ProblemDesc, dbo.Request.ReqDateFROM dbo.Machine INNER JOIN dbo.Request ON dbo.Machine.machID = dbo.Request.MachID INNER JOIN dbo.Problem ON dbo.Request.ProblemID = dbo.Problem.ProblemIDwhere machcustomID = @MachcusidGO
VB.NET CODE
Private Sub LSBmachcusid_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LSBmachcusid.SelectedIndexChanged
SqlDataAdapter2.Fill(DsMachcusidsearch1)
SqlSelectCommand2.Parameters("@Machcusid").Value = LSBmachcusid.SelectedItem.Value
DGstatussearch.DataBind()
End Sub
End Class
View 4 Replies
View Related
Dec 17, 2013
I've been tasked with creating a stored procedure which will be executed after a user has input one or more parameters into some search fields. So they could enter their 'order_reference' on its own or combine it with 'addressline1' and so on.
What would be the most proficient way of achieving this?
I had initially looked at using IF, TRY ie:
IF @SearchField= 'order_reference'
BEGIN TRY
select data
from mytables
END TRY
However I'm not sure this is the most efficient way to handle this.
View 2 Replies
View Related
Jun 8, 2015
I have the following Query.
SELECT CAST(DEL_INTERCOMPANYRETURNACTIONID AS NVARCHAR(4000)) COLLATE DATABASE_DEFAULT AS DEL_INTERCOMPANYRETURNACTIONID, 'SRC_AX.PURCHLINE.DEL_INTERCOMPANYRETURNACTIONID' FROM SRC_AX.PURCHLINE WHERE DEL_INTERCOMPANYRETURNACTIONID IS NULL UNION
SELECT CAST(DEL_INTERCOMPANYRETURNACTIONID AS NVARCHAR(4000)) COLLATE DATABASE_DEFAULT AS DEL_INTERCOMPANYRETURNACTIONID, 'SRC_AX.SALESLINE.DEL_INTERCOMPANYRETURNACTIONID'
[Code] .....
My tabel is HST_MASTER.Control.
I want to have this query in a stored procedure. What syntax stored procedure i need to make to fill my table.
View 1 Replies
View Related
Apr 7, 2008
my stored procedure is
create procedure t1 (@a int,@b int,@c int,@d int,@e int,@f int)
as
begin
select no,name,department from emp where a = @a and b =@b orc =@c or
d = @d or e = @e or f = @f
end
my problem is while executing i may get null values as input to the stored procedure .
how to validate them ? any ideas .
are there any arrays.
if c and d are null then my condition would be
where a = @a and b =@b or e = @e or f = @f
how many loops shall i have to write.
View 4 Replies
View Related
May 6, 2015
Is it possible to have an entire sql select statement as the input variable to a stored procedure? I want the stored procedure to execute the select statement.
ie.
exec sp_SomeFunc 'select * from table1 where id=1'
It may sound weird, but I have my reason for wanting to do it this way. Is this possible? if so, how do I implement this inside the stored procedure?
View 4 Replies
View Related
May 14, 2008
Hi,
I have 2 source tables emp_ass,aprvl_status these tables are not having common column to join. and 1 target table Time_Card, i have a stored procedure with 4 input parameters, emp_ass_id,status_id,start date,end date,i am inserting data into timecard based on emp_ass_id, my week start date is sunday and end date is saterday if emp start date is sunday i am just incremnting the start date by 7 days as end date is saterday and inserting that row, if employe statrt date is other than Sunday. i am just insering start date with to reach end date saterday, this work fine when i give the input parameters, now my reqirement is i need to automate this process as i need to get new emp_ass_id which is not in target table and insert his records based on his start date and end date,
ex:
if emp_ass_id is 1001, start date 1/1/2008 and end date is 2/1/2008 then i need to insert
Uniq_Id, emp_ass_id, start_date end_date status_id
1099
1001
1/1/2008 12:00:00 AM
1/5/2008 12:00:00 AM 1
1100
1001
1/6/2008 12:00:00 AM
1/12/2008 12:00:00 AM 1
1101
1001
1/13/2008 12:00:00 AM
1/19/2008 12:00:00 AM 1
1102
1001
1/20/2008 12:00:00 AM
1/26/2008 12:00:00 AM 1
1103
1001
1/27/2008 12:00:00 AM
2/2/2008 12:00:00 AM 1
the stored procedure will insert these records if i give the input parameters, now i need to automate this process by using SSIS. please help me,i need to get emp_ass_id,start_date,end_date dynamically from source table if emp_ass_id is not in target table.
Thanks in advance.
View 9 Replies
View Related
Sep 15, 2015
I'm seeing where previous developers have used a single stored procedure for multiple reports, where each report required different columns to be returned. They are structured like this:
CREATE PROCEDURE dbo.GetSomeData (@rptType INT, @customerID INT)
AS
BEGIN
IF @rptType = 1
BEGIN
SELECT LastName, FirstName, MiddleInitial
[Code] ....
As you can see, the output depends on the given report type. I've personally never done this, but that's more because it's the way I learned as opposed to any hard facts to support it.
So what I'm looking for is basically 2-fold.
View 5 Replies
View Related
Sep 4, 2007
Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :
CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'
AS
BEGIN
DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'
EXECUTE sp_executesql @B
END
GO
View 2 Replies
View Related
Feb 23, 2008
Hi all,
In a Database "AP" of my SQL Server Management Studio Express (SSMSE), I have a stored procedure "spInvTotal3":
CREATE PROC [dbo].[spInvTotal3]
@InvTotal money OUTPUT,
@DateVar smalldatetime = NULL,
@VendorVar varchar(40) = '%'
This stored procedure "spInvTotal3" worked nicely and I got the Results: My Invoice Total = $2,211.01 in
my SSMSE by using either of 2 sets of the following EXEC code:
(1)
USE AP
GO
--Code that passes the parameters by position
DECLARE @MyInvTotal money
EXEC spInvTotal3 @MyInvTotal OUTPUT, '2006-06-01', 'P%'
PRINT 'My Invoice Total = $' + CONVERT(varchar,@MyInvTotal,1)
GO
(2)
USE AP
GO
DECLARE @InvTotal as money
EXEC spInvTotal3
@InvTotal = @InvTotal OUTPUT,
@DateVar = '2006-06-01',
@VendorVar = '%'
SELECT @InvTotal
GO
////////////////////////////////////////////////////////////////////////////////////////////
Now, I want to print out the result of @InvTotal OUTPUT in the Windows Application of my ADO.NET 2.0-VB 2005 Express programming. I have created a project "spInvTotal.vb" in my VB 2005 Express with the following code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub printMyInvTotal()
Dim connectionString As String = "Data Source=.SQLEXPRESS; Initial Catalog=AP; Integrated Security=SSPI;"
Dim conn As SqlConnection = New SqlConnection(connectionString)
Try
conn.Open()
Dim cmd As New SqlCommand
cmd.Connection = conn
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "[dbo].[spInvTotal3]"
Dim param As New SqlParameter("@InvTotal", SqlDbType.Money)
param.Direction = ParameterDirection.Output
cmd.Parameters.Add(param)
cmd.ExecuteNonQuery()
'Print out the InvTotal in TextBox1
TextBox1.Text = param.Value
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
conn.Close()
End Try
End Sub
End Class
/////////////////////////////////////////////////////////////////////
I executed the above code and I got no errors, no warnings and no output in the TextBox1 for the result of "InvTotal"!!??
I have 4 questions to ask for solving the problems in this project:
#1 Question: I do not know how to do the "DataBinding" for "Name" in the "Text.Box1".
How can I do it?
#2 Question: Did I set the CommandType property of the command object to
CommandType.StoredProcedure correctly?
#3 Question: How can I define the 1 output parameter (@InvTotal) and
2 input parameters (@DateVar and @VendorVar), add them to
the Parameters Collection of the command object, and set their values
before I execute the command?
#4 Question: If I miss anything in print out the result for this project, what do I miss?
Please help and advise.
Thanks in advance,
Scott Chang
View 7 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Jan 26, 2004
Hi,
I am using a ListBox where a user can choose multiple lines.
The index of the selected items are then used in a stored procedure.
I wan´t to use the ID´s in this statement:
SELECT * FROM MyTable WHERE MyID IN (1,2,4,9)
But how can I do this?
If I pass them as a string, then I can´t use them as above.
Can I separate the string '1,2,4,9' so I can use them in the statement above?
Or can I send the values as a array to the stored procedure?
Regards!
Jonas
View 5 Replies
View Related
Feb 25, 2008
Hi
I have this procedure it is creating the proc but when I execute it gives error
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@ID".
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@nextCode".
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[GetNextAction]
(
@Code char(10),
@Track varchar(30)
)
AS
BEGIN
SET NOCOUNT ON;
Declare @ID int;
DECLARE @SQL1 VARCHAR(2000)
SET @SQL1='Select @ID = Sequence from'+' '+ @Track+ ' where Code=@Code'
EXEC(@SQL1);
Declare @nextCode varchar;
DECLARE @SQL2 VARCHAR(2000)
SET @SQL2 ='Select @nextCode= Code from '+' '+ @Track+ ' where sequence =(@ID+1)'
EXEC(@SQL2);
Declare @NextAction varchar(30);
Select @NextAction= nextAction from [dbo].[CaseStage] where Code=@nextCode;
Select @NextAction;
END
GO
Can someone correct me here
Thanks
View 4 Replies
View Related
Jul 9, 2001
Is there any way to use table variable as input to a function or stored procedure?
View 3 Replies
View Related
Apr 30, 2014
I am creating web application for state and dist wise map. I've the tables like
create table ind_state
(
ind_stat_id int,
ind_state_name varchar(50)
)
insert into ind_state values ('1','Pondi')
[Code] .....
My output is depends on the dist selection so made procedure
alter procedure LAT_TEST_DYNAM0
@dist_id int
as
begin
create table #temp (pincode varchar(10) ,latitude numeric(18,10),longitude numeric(18,10) ,descp varchar(5000))
if @dist_id!=0
[Code] ....
Myself doubt is when @dist_id is null or "0" how to show default value ?
Otherwise above my code is correct?
View 4 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Jul 14, 2015
The Input parameters will be supplied like below for a procedure.
DECLARE @Subject NVARCHAR(100) = 'Math, Physics, Science'
,@ClassNumber NVARCHAR(MAX) = '102,103|415,206|712,876'
/*
I need to select subject with classnumber's supplied from the input screen and output a result like this.Let's say I have a temporary table dbo.TableA
--For Math
INSERT INTO dbo.TableA
SELECT @Subject FROM Class
WHERE @ClassNumber in (102,103)
[code]....
View 6 Replies
View Related
Dec 8, 2006
hi,
I want to write a CLR store procedure like this:
public static void SetStateByBatch(SqlInt32[] ids)
{
using (SqlConnection conn = new SqlConnection("context connection=true"))
{
SqlTransaction tran = conn.BeginTransaction();
foreach (SqlInt32 id in ids)
{
try
{
conn.Open();
string commString = string.Format("update dbo.Notification set state=1 where noid='{0}'", id);
SqlCommand comm = new SqlCommand(commString, conn);
SqlContext.Pipe.ExecuteAndSend(comm);
}
catch
{
tran.Rollback();
}
}
tran.Commit();
conn.Close();
}
}
I'know that is not correct,how to resole this problem?
thanks in advance
View 1 Replies
View Related
Jun 20, 2014
How can I input parameter for Store Procedure like In ('Value1','Value2')
Example :
Create procedure GetUsers
@Users nvarchar(200)
as
Select * from Users where UserID in (@Users)
View 6 Replies
View Related
Nov 12, 2015
Display based on customerid display max of item they purchased on a order display only number like cust id pursed 12 items in 3rd order so when i enter customerid it should display 12.
using row number in sql server 2012.creating storeprocedure accepting customer id as input parameter.
cid oid items
1 1 10
1 2 12
1 3 3
1 4 4
so if we enter 1 as custid it got to give us 12 as the result..
View 7 Replies
View Related
Apr 25, 2006
Hi all,
I am trying to create a stored proc that will take
in a long string, but the stored proc does not allow me to take in more
than 50 characters at a time. Is there a way to take away the limit?
Please help me out, thanks in advance.
Daren
View 4 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
