What I need to do in seperate a group of numbers into two different categories based on a phase code. I have acheived this through two conditional statements, but when I try to total the numbers that were returned for each group I receive an #error.
This is an example of the switch statement I used in order to return the correct values for the Implemenataion.
I've tried substituting a 0 in for the "" at the end of each statement. I've also tried to take the first statement and put it into its own table field named ImplementationLedger, and them summing it. ie. =SUM(Fields!ImplementationLedger.Value)
Hi: I'm try to create a stored procedure where I sum the amounts in an invoice and then store that summed amount in the Invoice record. My attempts at this have been me with the error "The multi-part identifier "items.TAX" could not be bound"Any help at correcting my procedure would be greatly appreciate. Regards,Roger Swetnam ALTER PROCEDURE [dbo].[UpdateInvoiceSummary] @Invoice_ID intAS DECLARE @Amount intBEGIN SELECT Invoice_ID, SUM(Rate * Quantity) AS Amount, SUM(PST) AS TAX FROM InvoiceItems AS items GROUP BY Invoice_ID HAVING (Invoice_ID = @Invoice_ID) Update Invoices SET Amount = items.Amount WHERE Invoice_ID =@Invoice_IDEND
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
I have a stored procedure that performs a search function with params:@username nvarchar(50)@country nvarchar(50)and like 10 more.A user may provide values for these params optionally.So when the @username var is left blank, there should be no filtering on the username field (every field should be selected regardless of the username)Currently my statement is:select username,country from myUsers whereusername=@username and country=@countryWith this statement when a user provides no value for username the username field selects on ''m which returns ofcourse nothing...What can I do to solve this?Thanks!
Hi, is it possible to do a conditional WHERE in T-SQL? I have a table with a column that consists of a reference that starts with either a single alpha character or two alpha characters followed by four numeric digits (the numeric portion is always unique but the alpha isn’t). E.g. A1234, AB1235, AB1236, C1237, HT1238. What I want to do is select a range of rows based on the numeric portion of this reference column. In other words I want to select say 50 rows starting from row 1000 (rows 1000 to 1050) regardless of whether there is one or two alpha characters preceding the numerics.The Stored procedure I have so far works (using COUNT for testing) for selecting a range of rows that has two alpha's at the start. However, if I simply add an OR to the WHERE to select rows where there is a single alpha in the reference column, when a single alpha reference is found it will fail the first logical check for two alpha's giving an error condition. Therefore, how can I incorporate a conditional WHERE using IF or some alternative method, so that it will also give me all the rows in the number sequence that start with either single or double alpha's within the same SELECT / WHERE statement?
Thanks for any help.ALTER PROCEDURE [dbo].[sp_Test]
( @startRef int, @endRef int )
AS
BEGIN
SELECT Count(*) FROM myTable WHERE ((SUBSTRING(Ref,3,LEN(Ref)-2) BETWEEN @startRef AND (@startRef + @endRef)))
Hi all,I have one for all the blackbelters out there: is there a way i canmake a stored procedure where i can control the where statement withvariables? I have to do some complex transformations to get compose afact table for MSAS and there a a lot of similarities between thequeries and a few differences because of different account methodsetc. (booking in starting date, booking stuff on order entry datesetc) I want to put a combination of different rules in differentmembers of dimensions.An example of what i mean:CREATE STORED PROCEDURE dbo.FILLFACT (@PAR1, @PAR2)ASINSERT INTO FactTable (blah blah)SELECTIF @PAR1 = 'OrderDate'SourceView.OrderdateELSESourceView.StartDate,etc etc...FROMSourceViewWHEREIF @PAR2 = 'WholeTable'1=1IF @PAR2 = 'Incomplete'EndDate IS NULL OR EXIST (SELECT * FROM Exceptions WHERE...., etc)This way i could fill my fact table withEXEC dbo.FillFact 'beginDate','Wholetable'EXEC dbo.FillFact 'begindate', 'Rulebook1'EXEC dbo.FillFact 'BeginDate', 'Exceptions'etcetera.This is not an actual SQL script i use, just an example of what i'mtalking about. Or maybe i could pass the where statement entirley as avariable? But i can't use SET @PAR1 = 'EndDate IS NULL' and then useWHERE @PAR1 can I?I hope i'm making sense. Does anyone know if this is possible? Rightnow i have a procedure that is composed of a dozen of sql scripts thatare mostly the same, but i have to copy it for every combination ofsituations and then, of course, new stuff has to be added on 12different places. Again and again.Any thoughts?TIA,Gert-Jan van der Kamp
Hi, I've been looling around, but was unable to correctly use a conditional statement in a T-SQL Query. I have this SQL query and in it how I would do if it was C#. If someone could please help me get what I need I would appreciate it a lot. Here is the query:
Code Block
SELECT Ficha, Almoxarifado, [Código do Item], Descrição, Unidades.Unidade, [1ª Contagem], [2ª Contagem], Recontagem, Observações, Cancelar FROM Fichas INNER JOIN Itens ON [Código do Item] = Código INNER JOIN Unidades ON Itens.Unidade = Unidades.ID WHERE Ficha BETWEEN 01 AND 5000 AND Recontagem IS NULL AND
/* What I would do in C#, but need in T-SQL*/ if ([1ª Contagem] > [2ª Contagem]) {
if ([2ª Contagem] / [1ª Contagem] < 0.99)
return true; else {
if ([1ª Contagem] / [2ª Contagem] < 0.99)
return true; }
I really need a help in this. Does anyone know how to accomplish this? Thanks. Regars, Fábio
I'm trying to gather some user statistics based on 3 conditions. First I want to check if the referring querystring is already in the database. If not insert it into the db. Second, if the querystring is already in the database, then check if the ip-address of the user is already in the database. If it is, then check if the ip address was inserted today. If not, update the "refCountIn" field with +1. The problem lies in the third condition where we check if the ip-address was inserted today and if false, update the "refCountIn" field with +1 and if true, do nothing.Below is the code I have until now: 1 Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load 2 3 ' *** Declare the variables 4 Dim getStatCmd As String 5 Dim updStatCmd As String 6 7 Dim myRef As String = Request.QueryString("ref") 8 Dim myQueryString As String = Request.ServerVariables("QUERY_STRING").Replace("ref=", "") 9 Dim myRemoteAddr As String = Request.ServerVariables("REMOTE_ADDR") 10 Dim myHttpReferer As String = Request.ServerVariables("HTTP_REFERER") 11 12 Dim dtNow As Date = DateTime.Now 13 Dim dtToday As Date = DateTime.Today 14 15 ' *** Conditional INSERT command 16 getStatCmd = _ 17 "IF EXISTS(SELECT 'True' FROM tblReferers WHERE robotName = '" & myQueryString & "' AND refIpAddress = '" & myRemoteAddr & "' AND refTime = '" & dtToday & "') " & _ 18 "BEGIN " & _ 19 "SELECT 'This clickin has already been recorded!'" & _ 20 "END ELSE BEGIN " & _ 21 "SELECT 'Clickin recorded' " & _ 22 "INSERT INTO tblReferers(robotName, refIpAddress, refReferer, refTime) " & _ 23 "VALUES(" & _ 24 "'" + myQueryString + "'," & _ 25 "'" + myRemoteAddr + "'," & _ 26 "'" + myHttpReferer + "'," & _ 27 "'" + dtToday + "')" & _ 28 "END " 29 30 31 ' *** Conditional UPDATE command 32 updStatCmd = _ 33 "IF EXISTS(SELECT 'True' FROM tblReferers WHERE robotName = '" & myQueryString & "' AND refIpAddress = '" & myRemoteAddr & "' AND refTime <> '" & dtToday & "') " & _ 34 "UPDATE tblReferers " & _ 35 "SET refCountIn = refCountIn + 1, refTime = '" & dtNow & "' " & _ 36 "WHERE refIpAddress = '" & myRemoteAddr & "' AND robotName = '" & myRef & "'" 37 38 Dim insConnCmd As New SqlCommand(getStatCmd, New SqlConnection(connSD)) 39 Dim updConnCmd As New SqlCommand(updStatCmd, New SqlConnection(connSD)) 40 41 insConnCmd.Connection.Open() 42 insConnCmd.ExecuteNonQuery() 43 insConnCmd.Connection.Close() 44 45 updConnCmd.Connection.Open() 46 updConnCmd.ExecuteNonQuery() 47 updConnCmd.Connection.Close() 48 49 End Sub Anyone with an idea on how to solve this one? I think I need to write a subquery for the third condition, but I don't have a clue on how to handle this.Thanks in advance for your help!
I'm learning SQL and here I'm trying to use two things that I'm not familiar with - IF statements and the Inserted temporary table. Here's the background - skip this paragraph if you like. I'm working on a tasking system for the Help Desk - they get requests from the web site for various items and I break up the request into Software, Hardware, Accounts, etc tables and list the status of each item as "Requested". I'm also keeping a Tasks table to make work orders for each item requested. I've got triggers on the Accounts and Hardware tables that automatically make a new task for those items but the Software is more tricky because all software for a given request should be just one task. Software installs are all done by one person at the same time. So I'm trying to make a trigger that creates a new Task when a new Software record is inserted. But if a task already exists with the same RequestID (meaning they requested two peices of software and this is the second one), then I just want to update the task already created. Here's what I got: 1 CREATE TRIGGER [NewSoftwareTask] 2 ON [dbo].[Software] 3 AFTER INSERT 4 AS 5 BEGIN 6 7 -- If a software task already exists for this request 8 -- then update it. Otherwise create a new task. 9 10 if exists(select TasksID 11 from Tasks 12 where Tasks.RequestsID = inserted.RequestsID and 13 TasksType = 'Software') 14 BEGIN 15 UPDATE [BGHelpdesk].[dbo].[Tasks] 16 SET [TasksDescription] = [TasksDescription] + vbcrlf + "Install " + inserted.SoftwareType + ". " + inserted.SoftwareComments 17 WHERE Tasks.RequestsID = inserted.RequestsID and 18 TasksType = 'Software' 19 END 20 21 else 22 23 BEGIN 24 INSERT INTO [BGHelpdesk].[dbo].[Tasks] 25 ([RequestsID] 26 ,[TasksType] 27 ,[TasksSubType] 28 ,[TasksTitle] 29 ,[TasksDescription]) 30 SELECT 31 s.RequestsID 32 ,'Software' 33 ,s.SoftwareType 34 ,'New ' + s.SoftwareType + ' Account for Request ' + cast(s.RequestsID AS varchar) 35 ,s.SoftwareComments 36 FROM Software s join 37 inserted ON s.SoftwareID = inserted.SoftwareID 38 END 39 END 40 GO
It keeps balking at lines 12 and 17 saying "The multi-part identifier "inserted.RequestsID" could not be bound." The ELSE statement is what I use on the other tables and it works fine so the inserted temp record seems pretty straightforward but I must be doing something wrong...
Yet another puzzling question. I remember I saw somewhere a particular syntax to select a column based on a conditional predicate w/o using a user defined function. What I want to accomplish is this : SELECT (if column colA is empty then colB else colA) as colC from SomeTable. Possible ? Not possible? Have I hallucinated ?
currently I am creating a total if the date is between two entered dates:
select sum(case when exigo_data_sync.orders.orderdate between @prevMonthStart and @prevMonthEnd then 1 else 0 end) as PrevMonthCount,
I need to check an additional column for ($1.00) or $1.00. If it contains $1.00 then proceed as normal and add to the total. If it contains ($1.00) then subtract one from the total. Any advice?
This is probably quite simple, but it isn't sticking out at me.
In a simple table with two groups, I want to conditionally set the color of the first group to red or green based upon whether ANY value for this field equals a particular string.
I know how to conditionally set the color of the field. However, the below code appears to only compare the FIRST value in Fields!myField.Value to the string "bad". I want it to return "Red" if ANY of the values for Fields!myField.Value = "bad".
I frequently have the problem where I have a list of items to delete ina temp table, such asProjectId Description------------- ----------------1 test12 test43 test34 test2And I want to delete all those items from another table.. What is thebest way to do that? If I use two IN clauses it will do it where itmatches anything in both, not the exact combination of the two. I can'tdo joins in a delete clause like an update, so how is this typicallyhandled?The only way I can see so far to get around it is to concatenate thecolumns like CAST(ProjectId as varchar) + '-' + Description and do anIN clause on that which is pretty nasty.Any better way?
Have a View where I need to enter a conditional IF_THEN_ELSE statement in a new field (field has an alias). If this were an Access query I would do following:
IIf([dbo.AR1_CustomerMaster.EmailAddress] Is Null, "A", "B")
Hi,I'm trying to do calculations in a SQL statement, but depending on onevariable (a.type in example) I'll need to pull another variable fromseperate tables.Here is my code thus far:select a.DeptCode DeptCode,a.Type Type,(a.ExpenseUnit / (select volume from TargetData b where b.type =a.type)) ExpenseFromcalc1 aThe problem... a.Type can be FYTD, Budget, or Target... and dependingon which one it is, I need to make b either FYTDData, TargetData, orBudgetData. I'm thinking a case statement might do the trick, but Ican't find any syntax on how to use Case in an MS SQL statement. EvenIf statements will work (if that's possible), though case would beless messy.Any suggestions would be much appriciative. Thanks...Alex.
Is it possible to have a conditional union statement in a stored proc?Here's an example on the northwind database. If says there's a syntaxerror near the UNION statement. Looks like it doesn't like having theBEGIN directly in front of it.Is the only solution to create a dynamic sql string then call exec onit?Any help appreciated.Tom.CREATE PROCEDURE usp_test(@both int = 1)ASSET NOCOUNT ONSELECT * FROM territories WHERE regionid = 1IF @both = 1BEGINUNIONSELECT * FROM territories WHERE regionid = 2ENDGO
After many hours search many forums and many failed experiments, I figure it's time to turn to the experts.
I need to execute a query that changes the returned data based upon a parameter's value. In my example below, the lob field contains both text values and nulls.
SELECT uniqueID, lob, xdate FROM mytable WHERE
CASE WHEN @myparam = 'ALL'
THEN
xdate >= '2007-09-01' ELSE
xdate >= '2007-09-01' or lob = @myparm END
I've experimented with various forms of the LIKE function, checking for null/not null and keep coming up blank.
I thought about using an IF statement and creating different versions of the entire statement, however, in real-life I need to do this with four fields using four parameters (one for each field). The permutations are a little too much.
2) I am not able to get an If/Then statement to work. I am able to use the followingl; however, ideally I would want to have multiple if/else statements:
My source file is showing column 10 as string. My destination table is datetime. I am using the derived transformation with a conditional statement. How do I convert the value from string to date. Everywhere I try the (DT_DATE) I get an error.
I am trying to write a Transact-SQL statement and am having no success. I have a customers table that has some duplicate Customer Numbers in it, however the records do have a unique Reference Number. I am trying select all records that match a list of Customer Numbers but if there are more than 1 matching Customer Number I only want the one with the largest Reference Number.
My BASIC Select Statement is:
SELECT Cust_Ref_No, Customer_No, Customer_Name, Address1, Address2, Suburb, State, Postcode, Phone FROM Customers WHERE Customer_No IN (SELECT Customer_No FROM temp_Customers)
Much to my HORROR I found that what I am trying to do is simple in MS Access using the “First” Function – Such as below:
SELECT First(Cust_Ref_No) AS Cust_Ref_No, Customer_No FROM Customers GROUP BY Customer_No ORDER BY First(Cust_Ref_No), Customer_No;
There appears to be no “First” Function in Transact-SQL. Is someone able to show me how to achieve the same results in Transact-SQL as I can get with MS Access (I’d HATE to think that MS Access has more functionality in querying data than SQL Server in any way at all)?
P.S. I really need to run the select statement as one step rather than splitting it up into parts.
I have a data model with 7 tables and I'm trying to write a stored procedure for each table that allows four actions. Each stored procedure should have 4 parameters to allow a user to insert, select, update and delete a record from the table.
I want to have a stored procedure that can accept those 4 parameters so I only need to have one stored procedure per table instead of having 28 stored procedures for those 4 actions for 7 tables. I haven't found a good example online yet of conditional logic used in a stored procedure.
Is there a way to add a conditional logic IF statement to a stored procedure so if the parameter was INSERT, go run this statement, if it was UPDATE, go run this statement, etc?
I am struggling to come up with a set-based solution for this problem (i.e. that doesn't involve loops/cursors) ..A table contains items (identified by an ItemCode) and the set they belong to (identified by a SetId). Here is some sample data:
SetIdItemCode 1A 1B 24 28 26 310 312 410
[code]....
You can see that there are some sets that have the same members:
- 1 and 10 - 2 and 11 - 7, 8 & 9
What I want to do is identify the sets that have the same members, by giving them the same ID in another column called UniqueSetId.
I'm having an issue creating a report that can group & sum similar items together (I know in some ways, the requirement doesn't make sense, but it's what the client wants).
I have a table of items (i.e. products). Â In some cases, items can be components of another item (called "Kits"). Â In this scenario, we consider the kit itself, the "parent item" and the components within the kit are called "child items". Â In our Items table, we have a field called "Parent_Item_Id". Â Records for Child Items contain the Item Id of the parent. Â So a sample of my database would be the following:
Item's 2 & 3 are child items of "Kit A", Item 5 is a child item of "Kit B" and Item 6 is just a stand alone item.
So, in my report, the client wants to see the SUM of both the kit & its components in a single line, grouped by the parent item. Â So an example of the report would be the following:
Name | Available Qty -------------------------- Kit A | 15 Kit B | 25 Item 4 | 100
Is there a way in order to execute a subscribed report based on a certain criteria?
For example, let's say send a report to users when data exist on the report else if no data is returned by the query executed by the report then it will not send the report to users.
My current situation here is that users tend to say that this should not happen, since no pertinent information is contained in the report, why would they receive email with blank data in it.
I am trying to check a list (MyList) against another List(SupplierList).I want sum the Qty's of UniqueID on MyList and extract the sum of thesame UniqueId's on SupplierList.BTW There are more than one instances of Unique Id on each list.The Script below is providing me with the correct answer for someproducts (UniqueId), but incorrect amounts for others.The incorrect answer is always a multiple of the correct answer.What am i doing wrong???Regards,CiaránSELECT MyList.[Unique ID], SupplierList.[Unique ID], Sum(MyList.[SHP_QTY]), Sum (SupplierList.[Qty new])FROM MyList LEFT OUTER JOIN SupplierList ON MyList.[Unique ID]= SupplierList.[Unique ID]GROUP BY MyList.[Unique ID], SupplierList.[Unique ID]
I'm trying to get a sum but not doing too well. I think I need a subquery but am unsure how to phrase it.
Problem: I need to sum timesheet hours logged at work-code level to project-level (for named projects), where a project consists of 0-to-many work-codes. The 'Project' table is used for both projects and work-codes; the 'pr_code' contains the unique code (i.e. the work-code or the project-code), 'pr_master' field contains the parent. The Timesheet table will contain pr_code's for work-codes, but won't contain an entry for a work-code if no-one has logged any time to a work-code.
Intended output: For named projects QWER, QWET & QWEY:
QWER|16 QWET|2 QWEY|0
I've got the following so far which almost gets there, but appears to be summing up as it goes i.e. QWER=16, QWET=18, QWEY=18:
SELECT p1.PR_Master AS Expr1, SUM(Timesht.TS_Hours) AS Expr2 FROM Timesheet LEFT OUTER JOIN Projects ON Timesheet.PR_Code = Projects.PR_Code LEFT OUTER JOIN Projects p1 ON Timesht.PR_Code = p1.PR_Code WHERE (p1.PR_Master IN ('QWER', 'QWET', 'QWEY')) GROUP BY p1.PR_Master
This is a working 12 month intrest equation. I used this for the layout section but I am trying to take this and it gives me the correct values. But what I need to do next is have it sum those values.
I tried =SUM( whole expression but that didnt work) you can laugh at me I know but any help would be great!
=Switch(Fields!eqprecdt.Value< CDate("1 Jan 2007"),Fields!bookvalue.Value*datediff("d",Now(),#1/1/2007#)* .07/365,Fields!eqprecdt.Value> CDate("1 Jan 2007"), Fields!bookvalue.Value * datediff("d",Now(),Fields!eqprecdt.Value)* .07/365)*-1
SELECT BillDate, (SELECT SUM( Price) FROM Table1 ) AS SumDaylyPrice FROM Table1 WHERE BillDate BETWEEN (SELECT Min(BillDate) FROM Table1) AND (SELECT Max(BillDate) FROM Table1) GROUP BY BillDate
but this doesn’t work- summing everityng
I don’t know how to indicate in first row of query SELECT BillDate, (SELECT SUM( Price) FROM Table1 WHERE DATE = ????) AS SumPrice a WHERE clause for every day separately.
