T-SQL (SS2K8) :: Finding Rows From CSV Column With CSV Parameter
Nov 2, 2015
I have a split string function that will take a comma delimited string and give back a table with all the values.I have a table that has a column with a comma delimited comma delimited list of states.
I can use a where clause to find one state in the table (such as all records that have CA in the states string).But need to find out how to find all the rows that have all or any of the states from a comma delimited parameter.Here is the schema
CREATE FUNCTION [dbo].[split] (@list nvarchar(MAX))
RETURNS @tbl TABLE (svar nvarchar(10) NOT NULL) AS
BEGIN
DECLARE @pos int,
@nextpos int,
@valuelen int
I'm got a "folder" structure application which we'll be using as an in-house directory viewer. (In case you're wondering, it doesn't relate to any "real" folders, so using xp_cmdshell is out! )
Each folder and file record can have its own permissions, however these are assumed to inherit from the parent folder if no specific access rules have been set, basically in the same way file systems work. Each file record can only have one parent, and a folder can either have a parent or be at the root level.
Right now I'm having an issue with the inheritance of permissions. Say if I want to grant access to "Folder 1" to "Group A", then "Group B" shouldn't be able to see it. However, if I grant access to "File 1" in "Folder 1" to "Group B", then "Group B" should be able to see "Folder 1", but only see "File 1" and not the rest of the contents.
I thought I could do this with a CTE, but I'm having a bit of difficulty..
Here's the code:
CREATE TABLE #FileSystem ( FSIDINTEGER NOT NULL IDENTITY(1,1) PRIMARY KEY ,ParentFSIDINTEGER NULL ,NameVARCHAR(100) ,RecordTypeVARCHAR(1)-- (F)older, or Fi(L)e
I have a scenario wherein one of the column values in a row contains a string value which is non-delimited (as shown below). I need to split them by 2 characters and generate as many rows as count of set of 2 digits in that string.
I already have a solution in place to run it thru cursor and then do a while loop on the CountyList column by taking 2 digit value using Substring function (keeping start position dyanamic and jumping 2 positions).
I have a temp table that hosts data from a MDX query, I want to select a column from that table by passing in a parameter and then insert to a new table.
Here's the table structure, let's call it #temp
[Product].[Product Hierarchy].[level 03].[Member_CAPTION], [Measures].[Gross Sales] Bike, 200 Accessory , 100
I have a table in the DB created as [ProductSales]
Here's what works for me:
insert into [ProductSales](Product, Sales) Select convert(varchar(20), "[Product].[Product Hierarchy].[level 03].[Member_CAPTION]") as 'Product' , convert(decimal(18,2), [Measures].[Data]) as 'Sales' From #temp
But in reality the product level is not always on level 03, I want to define a parameter @Product and pass it to the select list.
Here's what I tried to do:
Declare @Product varchar(500) = convert(varchar(20), "[Product].[Product Hierarchy].[level 01].[Member_CAPTION]") Declare @SQL varchar(MAX) SET @SQL='insert into [ProductSales](Product, Sales) Select '+@Product+' as 'Product' , convert(decimal(18,2), [Measures].[Data]) as 'Sales' From #temp' Exec @SQL
But it threw me error, what is the right way to do it, is it because the double quote or single quote thing?
i am working on a small project, that I have found that someone is storing a float as a varchar(). But there are also some actual words in the same column.
I am trying to determine how I can select only the rows with alphabetical characters in that column.
I want to be able to select the rows with only the alphabetical characters. There is a huge mix, and I am assuming that every first letter is one of the 26 alphabetical character used. How can I write a query to use a REGEX to select any and all rows that cannot be CAST as a Float? I have nill to no experience using REGEX.
Scenario is like that single dept can have multiple LocationHeads, If Location heads are multiple then they should display in single column using *starting the name as mentioned bottom under required output.
Below is sample of data:
create table #Temp(depID int, Name varchar(50),LocationHead varchar(50)) insert into #temp values(1,'test','head1') insert into #temp values(1,'test','head2') insert into #temp values(1,'test','head3') insert into #temp values(2,'test1','head1') insert into #temp values(2,'test1','head2')
Required output
depID Name LocationHead 1test *head1,*head2,*head3 2test1 *head1,*head2
is there any way or a tool to identify if in procedure the Parameter length was declarated less than table Column length ..
I have a table
CREATE TABLE TEST001 (KeyName Varchar(100) ) a procedure CREATE PROCEDURE SpFindNames ( @KeyName VARCHAR(40) ) AS BEGIN SELECT KeyName FROM TEST001 WHERE KeyName = @KeyName END KeyName = @KeyName
Here table Column with 100 char length "KeyName" was compared with SP parameter "@KeyName" with length 40 char ..
IS there any way to find out all such usage on the ALL Procedures in the Database ?
Hi, I need to write a query which I have never attempted before and could do with some help.... I have a Groups table and a Users_Groups look up table. In this model, users can only be assigned to 1 group. If a group is deleted, a trigger should fire and delete any rows in User_Groups having a matching Groups.Ref. Unfortunately, the trigger hasn't been firing and I now have a load of defunct rows in Users_Groups relating users to groups which do not exist.I now need to find all of these defunct rows in Users_Groups so that I can delete them. How can I find rows in Users_Groups where the parent rows and refs in Groups are null? I've tried searching the net for something similar but don't even know how to word the search properly to get any half relevant results. Cheers PS, I do realise I need to tighten the constraints on my database
How can we find maximum value on column level? Suppose we have table A with four columns col1,col2,col3,col4, Now my query look likes this:
Select col1, col2,col3,col4, (col1 + col2) as addcol1, (col2 + col3) as addcol2, (col3 + col4) as addcol3, Max(addcol1,addcol2,addcol3) as maxvalue from Table A
I am getting error as max accepts one argument, I cannot use case statement as table is already bulky and it will make my query more expensive.
I'm trying to find gaps in times in a table of sessions where the session endings aren't sequential. That is, session 1 can start at 10:00 and finish at 10:30, while session 2 started at 10:05 and finished at 10:45, and session 3 started at 10:06 and finished at 10:20. Only the starting times are in order; the ending times can be anywhere after that.Here's a bunch of sample data:
INSERT INTO #SessionTest SELECT '1073675','Mar 3 2014 1:53PM','Mar 3 2014 1:53PM' UNION ALL SELECT '1073676','Mar 3 2014 2:26PM','Mar 3 2014 3:51PM' UNION ALL SELECT '1073677','Mar 3 2014 2:29PM','Mar 3 2014 3:54PM' UNION ALL SELECT '1073678','Mar 3 2014 2:29PM','Mar 3 2014 5:47PM' UNION ALL SELECT '1073679','Mar 3 2014 2:30PM','Mar 3 2014 3:37PM' UNION ALL
I have found a lot of examples of problems where I have just a single date column, and then I find the gaps in between that, but I'm having difficulty finding examples where it works with start and end date columns...
I have a SP SPone. i have optimized that and kept it as SPone_Optimized. i would like to test the both SP's execution time to find out how best the optimized one fares.
i planned to test it as follows
declare @starttime datetime,@endtime datetime declare @count int=0 select @starttime=getdate() while(@i<10000) begin execute SPone_optimized @param='value1' end select @endtime=getdate() select datediff(ms,@stattime,@endtime) 'total_exec_time'
----- for the SP that is before optimize
declare @starttime datetime,@endtime datetime declare @count int=0 select @starttime=getdate() while(@i<10000) begin execute SPone @param='value1' end select @endtime=getdate() select datediff(ms,@stattime,@endtime) 'total_exec_time'
CREATE TABLE #TEMP ( TYPE VARCHAR(10), SEQ INT, SUB_TYPE VARCHAR(10))
[Code] ....
Now for each type the seq is very important. Effectively by order of seq the subtype stays the same until another subtype changes it. So for TYPE1 100,110 and 150 are A. 170, 200,220 are B. 230 and 250 are C and so on.
However as you can see the data isnt actually stored in the row. I need a select statement that shows this data.
I have done this:
SELECT t1.*,t3.SUB_TYPE FROM #TEMP t1 CROSS APPLY (SELECT MAX(SEQ) SEQ FROM #TEMP AS t2 WHERE t1.SEQ >= t2.seq AND t2.SUB_TYPE <>'' AND t1.TYPE = t2.TYPE GROUP BY t2.TYPE) t2 INNER JOIN #TEMP t3 ON t3.TYPE = t1.TYPE AND t2.SEQ = t3.SEQ
And it seems to work. Is this the easiest way to do it or am i missing something?
I have a CRM database that has a lot of tables and would like to be able to extract the last 'x' records in descending order from each table based on a common a field 'modifiedon' that is in every table and is auto populated by the system.
;WITH ctePreAgg AS ( select top 500 act_reference "ActivityRef", row_number() over (partition by act_reference order by act_reference) as rowno, t3.s_initials "Initials" from mytablestuff order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
create table dbo.customer ( customer_id int identity primary key clustered, customer_name nvarchar(256) not null ) create table dbo.purchase_order ( purchase_order_id int identity primary key clustered customer_id int not null, amount money not null, order_date date not null )
Implement a query for the report that will provide the following information: for each customer output at most 5 different dates which contain abnormally high or low amounts (bigger or less than 3 times SDTDEV from AVG), for each of these dates output minimum and maximum amounts as well.
SELECT 'A' as Item, '1' as Version, 0 as Counter, '01-01-2011' as CreatedDate UNION ALL SELECT 'A' as Item, '1.1' as Version, 1 as Counter, '01-02-2011' as CreatedDate UNION ALL SELECT 'A' as Item, '1.2' as Version, 2 as Counter, '01-03-2011' as CreatedDate UNION ALL SELECT 'B' as Item, '1.2' as Version, 0 as Counter, '01-01-2011' as CreatedDate UNION ALL
[Code] .....
I want to write a script where if a user enters the version number, then the output should show all the upward and downward nodes..e.g. if a user selects '1.2' version then following should be the output
When I open a table and need to make a change within a particular record...
How do I find the particular row that I am looking for? I seem to have to scroll through 600 records to find the one I need. I've found a search and replace function but it doesn't seem to work.
JobRequirements (A) JobID int QualificationTypeID int
EmployeeQualifications (B) EmployeeID int QualificationTypeID int
Employee (C) EmployeeID int EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
Hi guys,This might be simplest thing, but I am newbie to databases.I need to find out only rows modified within certain time period from adatabase. As I undertand a way out could be adding an where clause forthe time period might be an option, I might be wrong here again.But, wanted to know is there any other option. Can triggers or anyother things help me in this matter.Regards,Abhijeet
CREATE TABLE [RS_A] ([ColA] [varchar] (10)[ColB] [int] NULL)CREATE TABLE [RS_B] ([ColA] [varchar] (10)[ColB] [int] NULL)INSERT INTO RS_AVALUES ('hemingway' , 1)INSERT INTO RS_AVALUES ('vidal' , 2)INSERT INTO RS_AVALUES ('dickens' , 3)INSERT INTO RS_AVALUES ('rushdie' , 4)INSERT INTO RS_BVALUES ('hemingway' , 1)INSERT INTO RS_BVALUES ('vidal' , 2)I need to find all the rows in A which do not exist in Bby matching on both ColA and ColBso the output should bedickens 3rushdie 4So if i write a query like this , I dont get the right result setSELECT A.ColA, A.ColBFROMRS_A AINNERJOIN RS_B BONA.ColA <B.ColAORB.ColB <B.ColBBut if i do the following, i do get the right result, but followingseems convoluted.SELECT A.ColA, A.ColBFROMRS_A AWHERE ColA + CAST(ColB AS VARCHAR)NOT IN (SELECT ColA+CAST(ColB AS VARCHAR) FROMRS_B B)
I need to build TSQL query to return the Last unit Cost from my table of movement of goods SL (on CTE) but the MAX(Datalc) must be Less or Equal to my HeaderInvoice.
This is my script:
With MaxDates as ( SELECT ref, MAX(epcpond)[Unitcostprice], MAX(datalc) MaxDate FROM sl
[code]....
the problem I have right now is that the Unitcostprice of my table of goods movements has a top date greather than the date of my bill.
Example:
invoice date : 29.01.2015 unitcost on invoice line = 13,599722 Maxdate (CTE) : 19.03.2015 unitCost from my table of movement of goods = 14,075
That ´s not correct because the MAxdates > invoice date and the unitCost of 14,075 is the cost on 19.03.2015 and not just before my invoice date.
