T-SQL (SS2K8) :: Pivot Data Based On Columns Value In Year Column
Jun 4, 2014
I am trying to pivot data based on columns value in year column... but results are not showing up correctly. I want to see all columns after pivot.I want to Pivot based on year shown in the data but it can be dynamic as year can go for last 3 years
I am also using an inner join as i have two amount columns in my code and i want to show both amount columns for all displayed year.I am able to pivot but I need in output all the columns like this Id,MainDate, Year1,Year2,Year3(if any), AMT1 for YR1, AMT2 for Yr1, , AMT1 for YR2, AMT2 for Yr2, AMT1 for YR3, AMT2 for Yr3,
Here is some data:
-- CREATE TABLE [dbo].[TEMP](
--[FileType] [varchar](19) NOT NULL,
--[dType] [char](2) NOT NULL,
--[dVersion] [char](2) NOT NULL,
--[Id] [char](25) NOT NULL,
--[MainDate] [char](40) NULL,
[code]....
View 5 Replies
ADVERTISEMENT
Jan 7, 2015
I am trying to figure out how to pivot a temporary table. I have a table which starts with a date but the number of columns and columns names will vary but will be type INT (Data, col2,col3,col4………….n)
So it could look like
Date , TS-Sales, Budget , Toms sales
01-Jan-14,100,120,300
02-Jan-14,80,150,300
03-Jan-14,100,20,180
Turned to this
01-jan-14, 02-jan-14, 03-jan-14
100,80,100
120,150,20
300,300,180
Or even just the date and a SUM
What I want is to be able to sum al the columns but without knowing the name and the amount columns to start with this is a manually processes. How could I automate this?
View 2 Replies
View Related
Sep 3, 2014
I have data:
Ticket User Priority
A ME 1
B ME 1
C ME 2
C ME 3
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
H YOU 3
I ME 1
Essentially if Ticket and User are the same I just want the min priority returned.
SO:
Ticket User Priority
A ME 1
B ME 1
C ME 2
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
I ME 1
I've tried partition and rank but can't get it to return the right output.
View 5 Replies
View Related
Feb 26, 2015
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)
[Code] ....
These are imported from an Excel Workbook so that's why all the columns with spaces for now.
View 9 Replies
View Related
Mar 15, 2014
-- My first Data
create table #myfirst (id int, city varchar(20))
insert into #myfirst values (500,'Newyork')
insert into #myfirst values (100,'Ediosn')
insert into #myfirst values (200,'Atlanta')
insert into #myfirst values (300,'Greenwoods')
insert into #myfirst values (400,'Hitchcok')
insert into #myfirst values (700,'Walmart')
insert into #myfirst values (800,'Madida')
-- My Second Data
create table #mySecond (id int, city varchar(20),Sector varchar(2))
insert into #mySecond values (1500,'Newyork','MK')
insert into #mySecond values (5500,'Ediosn','HH')
insert into #mySecond values (5060,'The Atlanta','JK')
insert into #mySecond values (7500,'The Greenwoods','DF')
insert into #mySecond values (9500,'Metro','KK')
insert into #mySecond values (3300,'Kilapr','MK')
insert into #mySecond values (9500,'Metro','NH')
--Third Second Data
create table #myThird (id int, city varchar(20),Sector varchar(2))
insert into #myThird values (33,'Walmart','PP')
insert into #myThird values (20,'Ediosn','DD')
select f.*,s.Sector from #myfirst f join #mySecond s on f.city = s.city
/*
idcitySector
500NewyorkMK
100EdiosnHH
*/
i have doubt on two things
1) How Can i compare the City names, by eliminating 'The ' at the beginning (if there is any in second tale city) between first and second
2) after comparing first and second if there is no match found in second them want to compare with third table values for those not found
--i tried below to solve first doubt, it is working but want to know any other wasys to do it
select f.*,s.Sector from #myfirst f join #mySecond s on replace (f.city, 'THE ','')= replace (s.city, 'THE ','')
--Expected results wull be
create table #ExpectResults (id int, city varchar(20),Sector varchar(2))
insert into #ExpectResults values (200,'Atlanta','JK')
insert into #ExpectResults values (100,'Ediosn','HH')
insert into #ExpectResults values (300,'Greenwoods','DF')
insert into #ExpectResults values (500,'Newyork','MK')
insert into #ExpectResults values (700, 'Walmart','PP')
insert into #ExpectResults values (800, 'Madidar','')
[code]....
View 1 Replies
View Related
Oct 15, 2015
Is it possible to include a currency symbol in an amount-field in PowerPivot/Pivottable based on a Currency column in a table? Something as the same as with SSAS MD. And I don't want fixed values in my code.
View 3 Replies
View Related
May 19, 2015
DELETE FROM Report_temp2
WHERE MSSalesID in
( Select Report_temp.MSSalesID FROM Report_temp)
DELETE FROM Report_temp
WHEREMSDate < '2015-07-01'
Actually the year stating form july.
Q1 is july,aug,sep.
Q2 is oct nov,dec.
Q3 is jan,feb,mar.
Q4 is april, may,june.
So what I need is dynamically I want to delete the data every year prior to current year.
View 4 Replies
View Related
Sep 10, 2015
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL]
CREATE TABLE [dbo].[PARAMEXAMPLE](
[Entity] [varchar](16) NULL,
[Code]....
View 4 Replies
View Related
Mar 6, 2014
I have two columns which needs to repeat based on ID and number of distinct rows in that ID.
ID Date Created
1 1/1/2012 Sudheer
1 1/2/2013 Sudheer
1 3/3/2013 Sudheer
2 1/2/2014 Veera
2 2/5/2015 Veera
Results
ID Date Created Date Created Date Created
1 1/1/2012 Sudh 1/2/2013 Sudh 3/3/2013 Sudh
2 1/2/2014 Veera 2/5/2015 Veera
View 3 Replies
View Related
Aug 15, 2015
I have a requirement to Insert Column 1 and Column 2 based on below condition only. Looking for a Store procedure or query
Condition : Allow Insert when column 1 and Column 2 have same values on 2nd row insert. But should not allow insert when Column 2 value is different.
ALLOW INSERT:
Column1 Column2
A0007 12-Aug
A0007 12-Aug
A0007 12-Aug
DONOT ALLOW INSERT: (COLUMN1 ID should not allow different dates)
Column1 Column2
A0007 23-Mar
A0007 02-Feb
FINAL OUTPUT Should be
Column1Column2
A000712-Aug
A000712-Aug
A000712-Aug
B000220-Jun
B000220-Jun
C000330-Sep
Discard Insert when Column1 ID's comes with Different dates.
View 4 Replies
View Related
Jul 14, 2015
I have a table of data that has a format similar to the following:
EventID | Event Date
--------------------
1 | 1/1/2014
2 | 2/8/2014
3 | 10/1/2014
4 | 2/5/2014
5 | 4/1/2014
6 | 9/1/2014
What I am trying to do is create a DAX formula to rank each event in the order that it happened for the year. So I want to end up with something like this. This way I can compare the events year over year as the events don't happen on any regular time schedule.
Event Date | Year | Rank
------------------------
1/1/2014 | 2014 | 1
2/8/2014 | 2014 | 2
10/1/2014 | 2014 | 3
2/5/2015 | 2015 | 1
4/1/2015 | 2015 | 2
9/1/2015 | 2015 | 3
I have tried to do this by creating a formula that will give me the day number of the year:
Day of Year =(YEARFRAC(CONCATENATE("Jan 1 ", YEAR([Event Date])),[Event Date])*360)+1
Then using rankX on this table, but I cant seem to get the proper result. Perhaps I am not understanding the use of rankX or going about this the right way.
=RANKX(FILTER(Event,EARLIER(Event[Event Year])=Event[Event Year]),Event[Day of Year])
or
=RANKX(All(Event[Event Year]),[Day of Year],,1,Dense)
View 5 Replies
View Related
May 20, 2015
Assuming I have a table similar to the following:
Auto_ID Account_ID Account_Name Account_Contact Priority
1 3453463 Tire Co Doug 1
2 4363763 Computers Inc Sam 1
3 7857433 Safety First Heather 1
4 2326743 Car Dept Clark 1
5 2342567 Sales Force Amy 1
6 4363763 Computers Inc Jamie 2
7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account
WHERE auto_id NOT IN
(SELECT MAX(auto_id)
FROM staging_account
GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
View 3 Replies
View Related
Sep 27, 2007
Hey all,
i have a question for all the SQL Gurus out there. I have tried to think of a way around, it, but i cannot work it out.
I have a set of data: Samples Below:
Item Warehouse FOR1 FOR2 FOR3 FOR4 FOR5 FOR6 FOR7 FOR8 FOR9 FOR10 FOR11 FOR12 FOR13 FOR14
01-0001 010 329 329 335 343 317 331 328 331 31
I have written a Query to Pivot this data like below:
SELECT WAREHOUSE,ITEM, QTY
FROM
(SELECT ITEM,WAREHOUSE,FOR1,FOR2,for3,for4,for5,for6,for7,for8,for9,for10,
for11,for12,for13,for14,for15,for16,for17,for18,for19,for20,for21,
for22,for23,for24 FROM mvxreport.tbldmsForecasttoMovex) p
UNPIVOT
(QTY FOR tbldmsForecasttoMovex IN (FOR1,FOR2,for3,for4,for5,for6,for7,
for8,for9,for10,for11,for12,for13,for14,for15,for16,for17,for18,for19,
for20,for21,for22,for23,for24))AS unpvt
Warehouse Item Qty
010 01-0001 329
010 01-0001 329
010 01-0001 335
010 01-0001 343
010 01-0001 317
010 01-0001 331
010 01-0001 328
010 01-0001 331
010 01-0001 315
010 01-0001 344
010 01-0001 334
010 01-0001 321
010 01-0001 327
010 01-0001 328
010 01-0001 332
010 01-0001 342
010 01-0001 316
010 01-0001 330
010 01-0001 330
010 01-0001 331
010 01-0001 315
010 01-0001 343
010 01-0001 333
010 01-0001 322
I would like to add some more code to the query, so for each FOR% column,
i can put a numeric value in it. The value will be the numbers ,1 - 24 . One for each line as this represents Months Forward.
Example:
Warehouse Item Qty Month
010 01-0001 329 1
010 01-0001 329 2
010 01-0001 335 3
010 01-0001 343 4
010 01-0001 317 5
010 01-0001 331 6
010 01-0001 328 7
010 01-0001 331 8
010 01-0001 315 9
010 01-0001 344 10
010 01-0001 334 11
010 01-0001 321 12
010 01-0001 327 13
010 01-0001 328 14
010 01-0001 332 15
010 01-0001 342 16
010 01-0001 316 17
010 01-0001 330 18
010 01-0001 330 19
010 01-0001 331 20
010 01-0001 315 21
010 01-0001 343 22
010 01-0001 333 23
010 01-0001 322 24
Does anyone know how i can do this?
Many Thnank
Scotty
View 5 Replies
View Related
Sep 4, 2015
I have two tables shown below and I wish to add a calculated column to Table 1.
Table1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Table2
ID   Activity                            Activity 1    Activity 2   Activity 3   etc   etc  etc  Total
1   Activity 1                          values        values      values                                 Total value
2   Activity 2                          values        values      values                                 Total value
3   Activity 3                          values        values      values                                 Total value
etc
I want each row in the new column to show the corresponding activity divided by the sum of the total. So in the row with Activity 3 I want the formula SUM(Table2[Activity 3])/SUM(Table2[Total]). Also the number of activities will vary.
I am actually wanting to calculate a more complicated formula which calculates the correlation .
View 2 Replies
View Related
Sep 17, 2014
I am creating dynamic pivot and my column order is as below
[2015-02],[2015-04] [Prior] ,[2014-08],[2014-11]
but i want to display as below:
[Prior],[2014-08],[2014-11],[2015-02],[2015-04]
View 1 Replies
View Related
Jul 21, 2015
I'm wanting to create reports in SSDT 2012 which is connected to a 2008R2 database. I want to have parameters on for my reports where a user is able to select a year such as 2014. Unfortunate my table containing the data has two columns with a date value. the first is of the int type and contains an epoch formatted date. The second is a varchar type and shows the date as 2015-07-01 08:00:00. I would like to be able to write a query to return the year, monthnumber and daynumber from either of these columns.Â
View 5 Replies
View Related
Jul 20, 2015
I'm trying extract a column from the table based on certain Conditions: This is for PowerPivot.
Here is the scenario:
I have a table "tb1" with (project_id, month_end_date, monthly_proj_cost ) and table "tb2" with (project_id, key_member_type, key_member, start_dt_active, end_dt_active).
I would like to extract Key_member where key_member_type="PM" and active as of tb1(month_end_date).
Is this possible using DAX ?
View 6 Replies
View Related
Sep 30, 2015
I have below report with following data
Date            Count
April-2015 Â Â Â Â Â Â 100
January-2002 Â Â Â Â 30
November-2010 Â Â 55
July-2000 Â Â Â Â Â Â Â 10
What is the best approach to sort this data based on date in a tablix and also sort the date in Column bar chart?
View 4 Replies
View Related
Jan 19, 2015
In our contract management system, each contract has over 100 reference fields attached to it. These are all stored in single table with contract ID, reference GUID and value as the columns.
So you will have multiple rows for each contract....one for each of the reference fields and then the value attached to that reference.
I want to return the data so there is one row per contract with the reference fields as columns and the reference field values as the column data.
Can this be done using PIVOT as I have tried but not had any success?
View 6 Replies
View Related
Sep 7, 2015
I have a table (folderstructure) with the following columns:
pcmid, cmid, foldername
pcmid is the parent directory
cmid is the directory
foldername is the name of the directory
e.g. note, number of levels are unknown
cmid pcmid name
1 NULL c:
101 1 level1
201 101 level2
45 101 level2a
56 201 level3
57 201 level3a
I'm looking to create a table that has cmid followed by the full directory path
So either (using above):
cmid path
1 c:
101 c:level1
201 c:level1level2
45 c:level1level2a
56 c:level1level2level3
57 c:level1level2level3a
etc.
OR
cmid 1 2 3 4
1 c:
101 c: level1
201 c: level1 level2
45 c: level1 level2a
56 c: level1 level2 level3
57 c: level1 level2 level3a
etc.
I've can use recursion to allocate a level to each name /cmid/pcmid combination
I could use multiple self joins
Is there a way this can be achieved using pivots or CTE recursion or something else...
View 2 Replies
View Related
Apr 18, 2014
--------------------------------------------------
SalesOrder-ItemName-Price-Category
-------------------------------------------------
01-Camera-100-Electronic
01-Memory-4GB-10-Memory
01-Battery-5-Battery
02-Keyboad-10-Accessories
02-Mouse-5-Accessories
03-CPU-300-Hardware
03-Motherboad-400-Hardware
From above rows i would like to select rows based on one distinct column SalesOrder, i want output like below.
-----------------------------------
SalesOrder-ItemName-Price-Category
-----------------------------------
01-Camera-100-Electronic
02-Keyboad-10-Accessories
03-CPU-300-Hardware
CREATE TABLE Table1 (SalesOrder varchar(10), ItemName VARCHAR(100), Price INT, Category VARCHAR(100))
[Code] ......
View 2 Replies
View Related
Jan 15, 2015
I have a query to get data group by High, Medium and Low so only three rows will be returned.
select
sum(case .... ) then 1 else 0 end) as [Column1],
sum(case .... ) then 1 else 0 end) as [Column2],
sum(case .... ) then 1 else 0 end) as [Column3]
from sometable
Group by High, Medium, Low
I want to manually add High, Medium and Low to each row's first column. the final result should look like:
Column1 Column2 Column3
High 123 123 123
Medium 123 123 123
Low 123 123 123
How can I do it?
View 2 Replies
View Related
Jun 19, 2014
I have two queries that give me the total sales amount for the current year, and the last year.
SELECT SUM([Sales (LCY)])
FROM [$Cust_ Ledger Entry] cle
LEFT OUTER JOIN dw.dim.FiscalDate fd
ON fd.CalendarDate = cle.[Posting Date]
WHERE [Customer No_] = '10135'
AND fd.CalendarYear = '2013'
[Code] ....
I would like to learn how to be able to make this a single query and end up with two columns and their summed up totals. Like it shows on the attached image.
This is my query without the columns I need:
SELECT
c.CustomerNumber
,c.Name
,c.ChainName
,c.PaymentTermsCode
,cle.CreditLimit AS 'CreditLimit'
,SUM(cle.Amount) AS 'Amount'
[Code] ....
View 1 Replies
View Related
Mar 9, 2015
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error:
Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18
Incorrect syntax near the keyword 'external'.
CREATE FUNCTION clrDynamicPivot
(
-- Add the parameters for the function here
@query nvarchar(4000),
@pivotColumn nvarchar(4000),
[code]....
View 1 Replies
View Related
Oct 14, 2015
LeaveEntitlementID PeriodID LeaveType EmployeeID NumberOfDays
1 1 Annual 1 10
2 1 Annual 1 10
3 1 Sick 2 10
4 2 Sick 2 10
5 2 Sick 2 10
I have the above table (LeaveEntitlement) which has the above columns.
What I want to sum the column NumberOfDays based on EmployeeID, LeaveType and PeriodID columns as of LeaveTypeNumberOfDays.
For example sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Annual
The result should be shown in new column name AnnualLeave (20)
sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Sick
The result should be shown in new column name SickLeave (10)
Same all leave Types
The table should be shown as the below after executing the query
LeaveEntitlementID PeriodID EmployeeID AnnualLeave SickLeave
1 1 1 20 0
2 1 2 0 10
3 2 2 0 20
is it possible in sql server
View 8 Replies
View Related
Jul 25, 2012
Suppose a table being
Create table myTable (ID int, col1 int, col2 int)
I know how to make a computed column being the sum of other column for the same ID e.g. "computed_column = col1 + col2".
Getting the average would be "computed_column = (col1 + col2)/2" But how to get the Max, Min?
Even "Sum(col1,col2)" or AVG(col1, col2) does not work as the formula for a computed column...
View 9 Replies
View Related
Mar 22, 2014
I get the following error , when I execute my CTE on SQL Server 2008 R2.CTE1 has more columns than were specified in the column list
--SQL CODE IS AS BELOW
WITH CTE1 (AUCTIONID,[Open Time], [Response SLA Broken], [Response SLA Deadline], [Response SLA Actual], [Responsetime SLA Broken Before Transfer], [Resolution SLA Broken], [Resolution SLADeadline], [Resolutiontime SLA Broken
[code]...
View 2 Replies
View Related
Apr 30, 2014
T1
-------
a1
a2
datetime
a4
a5
.....
i need distinct max between a1&a2 which i can get no problem but i cant get that unique datetime that correspond to a1&a2 in 1 query because this is will a subquery in a big query. Creating another temp table etc is not an option for me. for every specific a1 there is many entries of a2 + timedate etc.
create table abc_test (
id int
,runs int
,date1 datetime
[code]....
I can either get distinct ID + latest date or ID + largest #ofRuns, both will do but also need the third column.
View 5 Replies
View Related
Dec 5, 2007
Hi All,
The current/ Base table would be like below,
Products
level
Date
N1
b
11/5/2007
N2
p
11/6/2007
N3
p
11/7/2007
N4
p
11/14/2007
N5
b
11/15/2007
N6
p
11/23/2007
Expected Result.
<=11/7/2007
<= 11/14/2007
<=11/21/2007
b
1
1
2
p
2
3
4
Total
3
4
6
As you can see, the above table has cumulative data.
1. It calculates the number of Products submitted till a particular date- weekly
2. The date columns should increase dynamically(if the dates in base table increases) each time the query is executed
For ex: the next date would be 11/28/2007
I tried something like, it gives me count of €˜b€™ level and €˜p€™ level products by week
declare @date1 as datetime
select @date1 = '6/30/2007'
while (@date1 != (select max(SDate) from dbo.TrendTable))
begin
set @date1 = @date1 + 7
select Level, count(Products)
from
dbo.TrendTable
where SDate < @date1
group by Level
end
what I think is required is a pivot that dynamically adds the columns for increase in date range.
/Pls suggest if any other way of achieving it.
Pls help!!!
Thanks & Regards
View 3 Replies
View Related
Apr 22, 2015
I have a simple query showing customer net invoice value by month and work type. What I would like to do is to summarise the data so that for every customer I see the net invoice value for each work type for each month.
I would like to see this as: Group, Customer, Period and then the individual work types, of which there are always 8, as columns with the net invoice value under each of them. How can I accomplish this best? Sample code and results are below:
select [Group], [Customer], [Period], [Work_Type], Isnull([Invoiced],0) [Net] from vw_R_Damages
Group Customer Period Work_Type Net
------------------------------------------------------------ ------------------------------------------------------------ --------------------------------- -------------------- ---------------------
JARVIS CONTRACTING LIMITED JARVIS CONTRACTING LIMITED 2011-12 Breakdown / Call out 0.00
JARVIS CONTRACTING LIMITED JARVIS CONTRACTING LIMITED 2011-12 Breakdown / Call out 0.00
BARRATT BARRATT NORTHAMPTON 2011-12 Breakdown / Call out 0.00
[code]...
View 1 Replies
View Related
Mar 24, 2014
I run this code:
SELECT
Gruppo_Assegnatario,
[100] as stato1, [101] as stato2, [102] as stato3
FROM
(
select
[Code] ...
That extracts only zeros (columns "stato1", "stato2", "stato3"):
Gruppo_Assegnatariostato1stato2stato3
SDB_BE Vita Antiriciclaggio0 00
SDB_BE Vita Assistenza clienti000
SDB_BE Vita Emissione000
SDB_BE Vita Gestione Rendite000
SDB_BE Vita Liquidazioni000
[Code] ....
Unlike the "SourceTable":
select
CASE_ID_,
Stato,
Gruppo_Assegnatario
FROM TicketInevasiPerGruppoEStato
extracts
CASE_ID_ Stato Gruppo_Assegnatario
HD0000003736734 AssegnatoSDB_GBS Variazione
HD0000003736739 AssegnatoSDB_GBS Variazione
HD0000003736743 AssegnatoSDB_GBS Variazione
HD0000003736783 AssegnatoSDB_GBS Variazione
HD0000003736806 SospesoSDB_BE Vita Selezione
[Code] ....
How can I get the right count in the first data mining replacing the zeros (columns "stato1", "stato2", "stato3")?
View 5 Replies
View Related
Sep 10, 2014
I’m trying to figure out a way to sum columns for similar IDs, based on the contents of a single field. For example, if I’m calculating attendance percentages for students, and codes P and T count as Present, and codes A and E count as Absent, I would want to total Present and Absent codes separately, in their own columns. I would then like to use those totals to calculate percentage, but I can do that. It’s the SUM based on column value (by ID) that is giving issue.
If I have the following view:
IDLNFNCDTotal
123456MearsBenP12
123456MearsBenA2
123456MearsBenT6
234567NortonSusanP15
234567NortonSusanA2
234567NortonSusanT2
234567NortonSusanE1
I would like something like this:
IDLNFNPresentAbsentPercentage
123456MearsBen18290.0
234567NortonSusan17385.0
I’ve been playing around with nested queries, but nothing’s working. This is a glimpse of the mess that I’ve created trying to sort this out. Many errors.
I just noticed that I used a simpler example than the SQL I included, so I modified it a bit. There are additional fields that I'll need to include, but I want to get the logic working correctly. From there, I can handle the rest. So here's a more appropriate code example showing the direction I'm trying to go with this.
SELECT ID, [Last Name], [First Name], CD, Present, Absent, CAST(LEFT(Present / (Absent + Present) * 100, 5) AS varchar) + '%' AS Percentage
FROM (SELECT ID, CD, TotalAHD, CAST
((SELECT SUM(TotalAHD) AS Expr1
FROM SumAHDforAttndPercentages AS p
[Code] ...
View 2 Replies
View Related
Apr 8, 2014
I want to convert the data from Original Table to Reporting View like below, I have tried but not get success yet.
Original Table:
================================================================
Id || Id1 || Id2 || MasterId || Obs ||Dec || Act || Status || InstanceId
================================================================
1 || 138 || 60 || 1 || Obs1 ||Dec1 || Act1 || 0|| 14
2 || 138 || 60 || 2 || Obs2 ||Dec2 || Act2 || 1|| 14
3 || 138 || 60 || 3 || Obs3 ||Dec3 || Act3 || 1|| 14
4 || 138 || 60 || 4 || Obs4 ||Dec4 || Act4 || 0|| 14
5 || 138 || 60 || 5 || Obs5 ||Dec5 || Act5 || 1|| 14
View For Reporting:
Row Header:
Id1 || Id2 || MasterId1 || Obs1 ||Desc1 ||Act1 ||StatusId1||MasterId ||Obs2 ||Desc2 ||Act2 ||StatusId2 ||MasterId3||Obs3 ||Desc3 ||Act3 ||StatusId3||MasterId4||Obs4||Desc4 ||Act4 ||StatusId4 ||MasterId5||Obs5 ||Desc5 ||Act5 ||StatusId5||InstanceId
Row Values:
138 || 60 || 1 || Obs1 ||Desc1 ||Act1 ||0 ||2 ||Obs2 ||Desc2||Act2 ||1 ||3 ||Obs3||Desc3 ||Act3 ||2 ||4||Obs4||Desc4 ||Act4 ||0 ||5 ||Obs5 ||Desc5 ||Act5 ||1 ||14
View 6 Replies
View Related
