Transact SQL :: Insert Data To Different Table From Other Table
Aug 22, 2015
we have a table below
TABLE1
ID Roll Name Amount . . . . . . so on
---------------------------------------
1 2 Alex 500
2 5 Jones 600
3 2 Ales 400
and we have TABLE 2
ID Roll Name Amount . . . . . . . so on
In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,
1) Remove all data from TABLE2 First
2) Select those records from TABLE1 where Roll = 2
3) Then, Insert the results to TABLE 2
So we should get the result similar to below:
ID Roll Name Amount . . . . . . . so on
---------------------------------------
1 2 Alex 500
3 2 Ales 400
how can I do this in a same sql statement.
View 3 Replies
ADVERTISEMENT
Oct 5, 2015
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
View 3 Replies
View Related
Aug 10, 2015
I am still learning T-SQL .Lets consider the table below, ID 1-3 shows our purchase transactions from various Vendors and ID 4-6 shows our payments to them
Table 1 - VendorTransactions
ID PARTY AMOUNT VOUCHER
---------------------------------------
1 A 5000 Purchase
2 B 3000 Purchase
3 C 2000 Purchase
4 A 3000 Payment
5 B 1000 Payment
6 C 2000 Payment
7 A 1000 Payment
Now we have a blank table Table 2 - Liabilities
ID PARTY AMOUNT
I want that SQL should look for each individual party from Table 1 and Calculate TOTAL PURCHASE and TOTAL PAYMENTS and then deduct TOTAL PAYMENTS from TOTAL PURCHASE so we get the remaining balance due for each party and then add the DIFFERENCE AMOUNT alongwith PARTY to the TABLE 2 so I can get the desired result like below
ID PARTY AMOUNT
-------------------------
1 A 1000
2 B 2000
3 C 0
View 3 Replies
View Related
May 29, 2015
I have table with about 10000 rows, there is a column named Raw_XMLData is defined as varchar but data is xml format.
I try to insert into another table, if Raw_XMLData column has is valid xml data?
Is it possible to do in T sql?
View 2 Replies
View Related
May 14, 2015
i am having three tables
test
testId testName totalQuestion
Questions
QuestionId fktestId QuestionName
Now i am trying to insert a duplicate copy test by passing testId..Here is my sp
if not EXISTS(SELECT testName from tblTest WHERE UPPER(@testName) = UPPER(@testName))
BEGIN
INSERT INTO tblTest SELECT @userId, testName,duration,totalQuestion,termsCondition,0,GETUTCDATE(),GETUTCDATE() from tblTest WHERE id=@testId
SET @insertedTestId=@@identity
INSERT INTO tblTestQuestion SELECT @insertedTestId,question,0,GETUTCDATE(),GETUTCDATE() from tblTestQuestion WHERE testId=@testId
END
how to insert in answer table as one question can be multiple answers.
View 4 Replies
View Related
May 30, 2013
I have a database which will be generated via script. However there are some tables with default data that need to exist on the database.I was wondering if there could be a program that could generate inserts statments for the data in a table.I know about the import / export program that comes with SQL but it doesnt have an interface that lets you copy the insert script and values into an SQL file (or does it?)
View 7 Replies
View Related
Jun 25, 2015
I have a table in different databases with the same name. My goal is to compare the two tables, and insert a record into the second table where there is not a match in the first table. So far, my query looks like the following:
SELECT [metal] FROM [ProductionDatabase].[dbo].[Metalurgy]
EXCEPT
SELECT [metal] FROM [TestDatabase].[dbo].[Metalurgy]
This gives me a list of records from [Production].[dbo].[Metalurgy] which do not reside in [TestDatabase].[dbo].[Metalurgy]. Now, I need to use that list to insert missing records into [TestDatabase].[dbo].[Metalurgy]. How can I modify the above code to INSERT the missing records?
View 4 Replies
View Related
Jul 14, 2015
I need to find out if a Transaction ID exists in Table A that does not exist in Table B. If that is the case, then I need to insert into Table B all of the Transaction IDs and Descriptions that are not already in. Seems to me this would involve If Not Exists and then an insert into Table B. This would work easily if there were only one row. What is the best way to handle it if there are a bunch of rows? Should there be some type of looping?
View 12 Replies
View Related
Sep 20, 2015
Lets say we have two tables
tblPayments (Contains the records of Payments we made)
ID DATE AMOUNT BANK
----------------------------------------------------------
1 05/05/2015 5000 Natwest
2 05/05/2015 2000 Lloyds
3 05/06/2015 3500 Natwest
4 05/07/2015 4000 Natwest
5 05/08/2015 1500 Lloyds
tblReceipts (Contains the records of Receipts we received)
ID DATE AMOUNT BANK
----------------------------------------------------------
1 05/06/2015 5000 Natwest
2 05/06/2015 2000 Lloyds
3 05/07/2015 3500 Natwest
4 05/07/2015 4000 Natwest
5 05/08/2015 1500 Lloyds
Now, I also have a blank table (tblBankStatement) which contain the following columns
ID DATE RECEIPT PAYMENT BANK
-----------------------------------------------------------------------------
I want that when I execute the query, the query should INSERT the records to the New Table (tblBankStatement) from
tblPayments and tblReceipts by Date Ordered in ascending way WHEREBank should be 'Natwest'.
Also the Amount Column Data in tblPayments should be Inserted into the Payment Column in tblBankStatement and the Amount Column Data in tblReceipts should be Inserted into the Receipt Column in tblBankStatement.
So I could get the data just like below
tblBankStatement
ID DATE RECEIPT PAYMENT BANK
--------------------------------------------------------------
1 05/05/2015 0.00 5000 Natwest
2 05/06/2015 0.00 3500 Natwest
3 05/06/2015 5000 0.00 Natwest
4 05/07/2015 0.00 4000 Natwest
5 05/07/2015 4000 0.00 Natwest
What query should I write to perform the task above.
View 4 Replies
View Related
Oct 25, 2015
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
View 4 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Oct 13, 2015
I am stuck in the following scenario.
Tbl_Loan
Trans_ID
Emp_ID
Guarantor_1_ID
Guarantor_1_ID
TRN_01
EMP_01
[code]....
View 5 Replies
View Related
Aug 4, 2015
I have a table called ADSCHL which contains the school_code as Primary key and other two table as
RGDEGR(common field as SCHOOl_code) and RGENRl( Original_school_code) which are refrencing the ADSCHL. if a school_code will be updated both the table RGDEGR (school_code) and RGERNL ( original_schoolcode) has to be updated as well. I have been provided a new data that i have imported to SQL server using SSIS with table name as TESTCEP which has a column name school_code. I have been assigned a task to update the old school_code vale ( ADSCHL) with new school_code ( TESTCEP) and make sure the changes happen across all 3 tables.
I tried using Merge Update function not sure if this is going to work.
Update dbo.ADSCHL
SET dbo.ADSCHL.SCHOOL_CODE = FD.SCHOOL_Code
FROM dbo.ADSCHL AD
INNER JOIN TESTCEP FD
ON AD.SCHOOL_NAME = FD.School_Name
View 10 Replies
View Related
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
May 18, 2006
Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
View 7 Replies
View Related
Feb 9, 2012
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
Do I need to use a cursor?
View 5 Replies
View Related
Jul 20, 2005
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies
View Related
Mar 10, 2008
Is it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789
View 2 Replies
View Related
Apr 25, 2006
Hi,
I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.
View 1 Replies
View Related
Sep 17, 2015
I am trying to insert values from a temp table #TableName to a db table.
CATEGORY table- CategoryId, CategoryName, CategoryDescription
Then I did this :
Select CategoryName
into #TableName
from CATEGORY
Now I'm doing this :
Insert into #TestTable values(1,'This is:'+CategoryName)
select CategoryName from #Test
CategoryID right now is not PK.
So, the intention is to insert as many CategoryNames available into TestTable with id 1 and category name edited as shown in Inset statement.
What is wrong with this query. Its not working.
View 12 Replies
View Related
Sep 27, 2011
i need to write a query that insert in A table if and only if the row does not exist already in the table (the source is a select statement).
i tried the following:
insert into [A]
select * from [B]
where Not EXISTS (select * from [A])
table [A] is still empty, but it does not insert any thing! .. what i know is that the EXIST checks if the selected row exists in the subquery, ain't ?
View 9 Replies
View Related
Aug 30, 2015
Lets say we are executing this query below to retrieve each customer and the amount associated to a table
"INSERT INTO tblReceiptDue (Dealer, Amount) SELECT CustomerName, SUM(CASE WHEN VoucherType = 'Sales' then Outbound ELSE - Inbound END) AS AMOUNT from
tblSaleStatementCustomer WHERE CustomerType = 'Dealer' GROUP BY CustomerName"
Which display the data like below
DEALER AMOUNT
------------------------------------------------
ABC 2000
XYZ 1000
However I have one more table TABLE2 which contains two columns
DEALER OPENING
-------------------------------------------------------
ABC 5000
XYZ 7000
I want to modify my query in such a way that AMOUNT column should also add
OPENING from TABLE2 So that I must get the result like below
DEALER AMOUNT
------------------------------------------------
ABC 7000
XYZ 8000
View 10 Replies
View Related
Jun 5, 2008
Hello,
I have a table called #table1 which is populated as in the example below.
I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example.
Note #table2 is a fixed table that follows the structure below.
Can any of you T-SQL gurus help me with my problem?
Any help will be most appreciated.
Thanks
---------------------------------------------
/*
Please paste T-SQL into query window
*/
---------------------------------------------
CREATE TABLE #table1
--max of 5 orders
(
custID nvarchar(6),
dateorder [datetime] NULL,
order1 nvarchar(2),
order2 nvarchar(2),
order3 nvarchar(2),
order4 nvarchar(2),
order5 nvarchar(2)
)
GO
SET ANSI_PADDING OFF
Insert into #table1
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all
select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all
select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all
select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all
select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all
select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all
select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null
select * from #table1
--This is the table i would like to insert my data into
CREATE TABLE #table2
--max of 5 orders in 1 day
--it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on...
(
custID nvarchar(6),
dateorder1 [datetime] NULL,
order1_1 nvarchar(2),
order1_2 nvarchar(2),
order1_3 nvarchar(2),
order1_4 nvarchar(2),
order1_5 nvarchar(2),
dateorder2 [datetime] NULL,
order2_1 nvarchar(2),
order2_2 nvarchar(2),
order2_3 nvarchar(2),
order2_4 nvarchar(2),
order2_5 nvarchar(2),
dateorder3 [datetime] NULL,
order3_1 nvarchar(2),
order3_2 nvarchar(2),
order3_3 nvarchar(2),
order3_4 nvarchar(2),
order3_5 nvarchar(2),
dateorder4 [datetime] NULL,
order4_1 nvarchar(2),
order4_2 nvarchar(2),
order4_3 nvarchar(2),
order4_4 nvarchar(2),
order4_5 nvarchar(2),
dateorder5 [datetime] NULL,
order5_1 nvarchar(2),
order5_2 nvarchar(2),
order5_3 nvarchar(2),
order5_4 nvarchar(2),
order5_5 nvarchar(2)
)
Insert into #table2
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null, '2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03','2008-04-21 00:00:00.000' , '01', '06', null, null, null,'2008-04-22 00:00:00.000' , '01', '02', '05', '07', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null ,'2008-04-22 00:00:00.000' , '01', '02', '05', '16', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null , null, null, null, null, null, null, null, null, null, null, null, null
select * from #table2
drop table #table1
drop table #table2
----------------------------------------
View 2 Replies
View Related
Sep 24, 2006
I have two databases in SQL Server and they both have almost the same tables. I want to insert the data of a table from the first database into a table with the same name, but from the second database. How can i do this?
View 1 Replies
View Related
Jul 30, 2015
I have to tables like given below Landing table "A" (Data load will happen over here, No primary keys mentioned over here) table "B" .Now I want to move the data from A to B.I have made use of below query insert into B select * from A...Landing table "A" has huge no of records, MS SQL server is taking huge amount of time.any alternative way to make this insertion process faster?
View 6 Replies
View Related
Feb 26, 2015
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
View 1 Replies
View Related
Oct 2, 2015
In a special request run, I need to update locker and lock tables in a sql server 2012 database, I have the following 2 table definitions:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[lockID] [int] NULL
CONSTRAINT [PK_Locker] PRIMARY KEY NONCLUSTERED
[Code] ....
The locker table is the main table and the lock table is the secondary table. I need to add 500 new locker numbers that the user has given to me to place in the locker table and is uniquely defined by LockerID. I also need to add 500 new rows to the corresponding lock table that is uniquely defined in the lock table and identified by the lockid.
Since lockid is a key value in the lock table and is uniquely defined in the locker table, I would like to know how to update the lock table with the 500 new rows. I would then like to take value of lockid (from lock table for the 500 new rows that were created) and uniquely place those 500 lockids uniquely into the 500 rows that were created for the lock table.
I have sql that looks like the following so far:
declare @SchoolID int = 999
insert into test.dbo.Locker ( [schoolID], [number])
select distinct LKR.schoolID, A.lockerNumber
FROM [InputTable] A
JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type and A.schoolnumber = @SchoolNumber
JOIN test.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID
AND A.lockerNumber not in (select number from test.dbo.Locker where schoolID = @SchoolID)
order by LKR.schoolID, A.lockerNumber
I am not certain how to complete the rest of the task of placing lockerid uniquely into lock and locker tables? Thus can you either modify the sql that I just listed above and/or come up with some new sql that will show me how to accomplish my goal?
View 7 Replies
View Related
Jul 26, 2015
I have the following 2 tables:
Table: classes Columns: classID, hp
Table: char_active Columns: name, classID, hp
The classes table is already populated.
What I want to do is insert a new row into char_active using the name and classID column, and have the HP column auto populate based on the corresponding value in the classes table. This is the trigger I wrote but I'm getting the error
Incorrect syntax near 'inserted'.
I'm new to sql, this is actually the first trigger I've tried writing.
create trigger new_hp on curr_chars.char_active
instead of insert
as
declare @hp tinyint
select @hp=lists.classes.hp from lists.classes where lists.classes.classID=inserted.classID
insert into curr_chars.char_active (name, classID, hp) inserted.name, inserted.classID, @hp
go
View 4 Replies
View Related
Aug 7, 2015
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10))
insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1')
insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2')
insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1')
insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
[code]....
View 4 Replies
View Related
Nov 17, 2015
Consider a 4 tables where 1 of them is considered to be as the parent class and the other 3 are sub-classes and they are disjoint so for every recored i insert in the parent class i want to also insert in one of the subclass according to a condition which checks a certain attribute in the recored that is also entered in the parent class .. how could this be done .
View 8 Replies
View Related
Aug 20, 2015
I have a string ,want to split the values after every space as column value and insert them into a table
1306453 0 0 0 0 0
col1 col2 col3 col4 col5 col6
1306453 0 0 0 0 0
View 7 Replies
View Related
Dec 4, 2015
I'm trying to fill a temp table whose columns are the same as another table plus it has one more column. The temp table's contents are those rows in the other table that meet a particular condition plus another column that is the name of the table that is the source for the rows being added.
Example: 'permTable' has col1 and col2. The data in these two rows plus the name of the table from which it came ('permTable' in this example) are to be added to #temp.
Data in permTable
col1 col2
11, 12
21, 22
Data in #temp after permTable's filtered contents have been added
TableName, col1 col2
permTable, 11, 12
permTable, 21, 22
What is the syntax for an insert like this?
View 2 Replies
View Related
Sep 15, 2015
How do I do a bulk insert into a temp table from a text file. Text file looks like that:
ver_id TYPE
E57AB326-803C-436E-B491-398A255C919A 58
34D2A601-6BBA-46B1-84E1-3A805FDA3812 58
986E140C-62F1-48F1-B428-3571EBF00DA0 58
My statement looks like this:
CREATE TABLE [dbo].[tblTemp]([ver_id] [nvarchar](255), [TYPE] [smallint])
GO
BULK INSERT [dbo].[tblTemp]
FROM 'C:v2.txt'
I keep receiving errors.
The error I receive is: Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (TYPE).
View 2 Replies
View Related
