Im trying to get query by selecting the month from dropdownlist and display the records .by using the below query I need to enter the date in tecxtboc then it will show the output
select Standard, Total, MonthName
from (SELECT Standard, COUNT(Standard) AS Total,
datename(month, ReportDate) as [MonthName]
FROM CPTable where
ReportDate >= @ReportDate
[Code] .....
hi friends,
how to display the records for current month?
I need a simple query to display all the days of a given month and year
View 2 Replies View RelatedI am trying to get count of records by month wise when they select year .It was showing the out put correctly but its showing months arer in numbers,but I want to display Jan,Feb ...
SELECT DISTINCT Standard, COUNT(Standard) AS Total,month(ReportDate) Month
FROM CPTable where
year(ReportDate) = '2015'
GROUP BY Standard, Standard ,
month(ReportDate)
Output
Standard Total Month
NULL 0 1 //Jan
NULL 0 2 //Feb
NULL 0 3
NULL 0 4
NULL 0 5
OSHA 18001, 1 5
NULL 0 6
NULL 07
NULL 08
OSHA 18001,158
TL 9000,18
NULL 09
OSHA 18001,139
I have a table that have student names and their birth dates just like below
a) tblStudentInfo
which shows records like below (Birth Dates are shown in Year-Month-Day format)
ID StudentName BirthDate
1 ABC 2002-12-25
2 DEF 2002-09-10
3 GHI 2002-09-19
4 JKL 2002-06-10
[code]...
I want to perform a query that should display the upcoming birthday of all students according to today.Lets say, today is 2015-10-02, so the query should display the result according to today's date just like below
ID StudentName BirthDate
1 ABC 2002-12-25
2 VWX 2002-01-01
3 STU 2002-02-03
4 PQR 2002-03-05
[code]...
Hello everybody,I want to ask how to create query use the solve the problem of this..Example : I want to display the month january between february... Sorry if my english is not good...Thank you...
View 3 Replies View RelatedI am writing a query to display the count of products when a month is the primary month (Month where large sales happened)..Please consider the following query..
With Member ProductRank as
Rank([Date Due].[Calendar].currentmember,TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount]))
Member PrimaryProd as
Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1))
Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,bdesc) on 1 from [Sales]
Output:
It runs for 13 seconds on my laptop. I have modified the query to get the results fast like With
Set MySet as TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount])
Member ProductRank as
Rank([Date Due].[Calendar].currentmember,MySet)
Member PrimaryProd as
Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1))
Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,Bdesc) on 1 from [Sales]
Output:
This query runs instantly and result is not the same. Am I missing something here?
Hello,
I have a report with a multi-value parameter. In its' drop drop box, I can select ALL or I can individually select single items, but it doesn't appear that I can select a range of items using the shift key. The problem is; occasionally the user will want to select everything, and them eliminate an item or two. The list it too long to select every one individually. It would be an easy solution if hey could select the entire list, then deselect what they don't want. Is there a way?
Thanks.
Dear Readers of this post,
I have a dropdownlist that is populated with an sqldatasource as follows:
SELECT [Project_ID], [Title] FROM [Projects] WHERE [Username] = @Username AND Hide ='false'
The Datavalue vield of the DDL is populated with the [Title].
When the user submits the form [including the value of the of the drop down list] i want to be able to add the Project ID and the Title Values into another database table.
any ideas
Sat
For a controlParameter in the ASP code, how do I retreive the selectedValue of the drop down list?Would this work?
<asp:controlParameter Name="InvoiceNumber" Type="String" ControlID="ddAdSize.Value" />
Hi All,
I am having the following issue with one of my reports using Reporting Services 2005. When you chose a value from dropdown list , the page reloads but the dropdown list does not keep the value selected. It always display the first item from the dropdown list.
Any idea?
Thanks!
Gonzalo
Hi everybody,
I created a multivalue parameter in SSRS 2005 SP2, but the problem is that the width of the dropdown list is too small to fit my data (I'd like to avoid scrolling horizontally).
Is there any way to configure this?
Thanks in advance for your help.
Zoz
Hi masters
well got a SQL server 7 and a table
and got drop down list in my asp page
what I want to do is that the content and value of the drop down list will be grabbed from the database, when page loads.
can you please guide me
many thanks
S
Hi,I have table (tbl_a) that get it values form three Dropdown List and the PK of this table is FK in different table(tbl_b).Since tbl_a get its values from three Dropdown List the number of rows in this table is limited to the number of combinations the three Dropdown List is offer (in any case the number of raws in that table will be final).Assuming tbl_a and tbl_b are both empty.
The problem is that if i want to insert row to tbl_b i have to check first if there is a row that holds the values (or combination of values) i am getting from the Dropdown List in tbl_a .Then, if such row is exist i have to get the PK of that raw and insert it to tbl_b (as FK),if such row does not exist, i have to insert it and then get the PK of this row and insert it to tbl_b (as FK).
In the end, tbl_a will have all the combination the three Dropdown List can offer so checking if raw exist in this table will not be necessary.
In my opinion this is not effective way to do that.Can someone offer me better way to do it?
Thanks
I have a dropdown list that is populated by two columns in a database.select (firstname+surname) AS Fullname from table where id = 'id';
It works fine but i want to know how i would get a space between the firstname and the surname because at the moment all the values come back as JoeBloggs....without any spaces
Hi,
I have table (tbl_a) that get it values form three Dropdown List and the PK of this table is FK in different table(tbl_b).
Since tbl_a get its values from three Dropdown List the number of rows in this table
is limited to the number of combinations the three Dropdown List is offer (in any case the number of raws in that table will be final).
Assuming tbl_a and tbl_b are both empty.
The problem is that if i want to insert row to tbl_b i have to check first if there is a row that holds the
values (or combination of values) i am getting from the Dropdown List in tbl_a .
Then, if such row is exist i have to get the PK of that raw and insert it to tbl_b (as FK),
if such row does not exist, i have to insert it and then get the PK of this row and insert it to tbl_b (as FK).
In the end, tbl_a will have all the combination the three Dropdown List can offer so checking if raw exist in this table will not be necessary.
In my opinion this is not effective way to do that.
Can someone offer me better way to do it?
Thanks
I am building a report with several search parameters; three of which are dropdown boxes each populated by a data set. I wanted something more user-friendly than the default "(Null)" in the dropdown, so for each data set, it returns a result set UNIONed with " N/A" to show up first as the default.
For some reason, when the report loads, the first dropdown populates just fine and does indeed have the default value " N/A" but the other two dropdowns are grayed-out. Until you change the first dropdown (to anything, apparently it doesn't matter what you change it to) the other two stay grayed-out. When the first is changed, the other two are populated and default to the desired " N/A" default value.
Why would it do this, when it didn't do it before; i.e. when the default for all of them was simply null. The dropdowns are not dependent on each other; they don't depend on other parameters for their values. Any help would be appreciated.
I have a web form that needs to be bilingual. It contains several dropdown lists. The "text" and "value" for each item in the dropdown list is retrieved from a database. The logic reads the database and then populates the various dropdowns with logic such as:
dim newItem as new ListItem(textString, valueString)
theDropDown.items.add(newItem)
The problem that I am having occurs when the textString needs to contains special characters such as accented vowels or an "n" with a tilde. I have tried populating the database with HTML-formatted strings such as "Avión", hoping that this would display "Avion" with an accute accent over the "o". Unfortunately it displays "Avión".
How do I get dynamically-created dropdowns to display special characters? If the answer is to simply store the special characters directly in the database, then the question becomes how do I get the special characters into the database? I tried to figure out how to write a T-SQL command such as
update tablex set SpanishName = 'Avion' where id=999
but I can't figure out the syntax to insert an accented 'o' into the string.
Thanks.
I'm working on project for school that involves building a query in a video store database. The query is suppose to pull the total number of movies rented the previous month. I can get it to work if I physically put in the dates. However, part of the requirements is to set it up so the date range is auto calculated. The following is the code I have
SELECT COUNT(RecordNumber) AS TotalRentalsForMonth FROM RentalHistory
WHERE TransactionDate BETWEEN (YEAR(getdate()), MONTH(getdate()), 1)
AND (YEAR(getdate()), MONTH(getdate())+1, 0)
I get the following error message when I try to run it:
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ','.
Anyone have an idea where my mistake is within the date range
I am in seach of a query where in I can provide month, year and client name and fetch last available comments from the table.
Client,Month,Year and Comments are columns in that table.
For Ex: If i pass client as A, month as 7 and year as 2015, I should get comments for client A, month July and year 2015 if available.
If data not available, it must go to June month and so on until it finds comments.Also when month is Jan, if query is going back, year also should get changed.
i have two columns in a "release" table that i concatenate on my aspx page into one value for my dropdown list. for example, my database columns might look likeMajor: 3 | 3 | 4 | 4 | 5Minor: 1 | 2 | 1 | 2 | 1and my drop down list text like3.1 | 3.2 | 4.1 | 4.2 | 5.1my question comes when trying to take the drop down list's selected value and splitting it back into two fields so that i can use it for another query. how can i split my "major" and "minor" version numbers back up so that i can run a query similar to:SELECT * FROM [Version] WHERE (([Major] = @Major) AND ([Minor] = @Minor))but only having the one parameter of: <asp:ControlParameter ControlID="ddlVersion" Name="Version" PropertyName="Text" Type="String" /> where the selected value has a string of "<major>.<minor>" (where the numbers are separated by a period)?
View 6 Replies View RelatedI am trying to populate a dropdownlist from a sql data source in my codebehind using c#. I thought I had the code correct but I keep getting the following error and I am stuck: "Only assignment, call, increment, decrement, and new object expressions can be used as a statement"
Here is the code:protected void populateOppNameList(){
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);SqlCommand cmd = new SqlCommand("SELECT empname FROM opportunity WHERE (username = " + userName + ")", conn);
SqlDataAdapter adapter = new SqlDataAdapter(cmd);
try
{
conn.Open();DataSet ds = new DataSet();DropDownList ddl_OppNames = (DropDownList)FormView1.FindControl("dropdownlist1");
ddl_OppNames.DataSource = ds;
ddl_OppNames.DataBind;}catch (Exception e)
{
}
finally
{if (conn != null) { conn.Close(); }
}
}
Hello,
I have an issue with connecting Excel to an analysis Services 2005 database. The computer is running Windows XP Sp2 and Office XP. I installed the oledb driver 9.0 but when I tried to connect with the pivot table and I want to create the connection, the dropdown list of the data provider is empty. I tried on another computer with Excel XP and the system is working fine.
Is there somebody that could help?
Thank you
Hi,
I am currently trying to develop an application which would help in retrieving data from cubes (Microsoft Analysis Services)! The user would not be accessing the Business Intelligence Studio, etc. but would be viewing the data from a custom made application developed in VB.Net2005.
While implementing this, I want to populate the drop-down-list in the VB(.Net) Form, by retrieving the various hierarchies in the dimensions of the cubes (along with dimensions if possible). This should be done dynamically and in real-time!
Can you please help in implementing this? Any code/method, etc would be highly appreciated!
Thanks in advance.
Best wishes!
(Software : SQL Server 2005 Enterprise Edition (with Analysis Services and BI Studio), VS.Net 2005 Enterprise Edition, ADOMD.Net)
Hi,
I believe somebody know the reason. Please help me on it!
I plan to pass a multivalued parameter from my web application to the server report, and let user select the value(s) from the value set. But when I run the report, there's no checkbox leftside of the values, that means user has no choice on this parameter.
Is there any way to do it?
Thanks,
Jone
Hello,
I have two tables, Promotion and Promolocation. The Promotion table is used to set up promotions or sales, and consists of a PromoID, StartDate, and EndDate. Each PromoID is referenced in the Promolocation table, which is used to assign items to a promotion for various locations or stores. The Promolocation table consists of PromoID, LocID, SkuID, PromoPrice, and DiscLevel.
There are times where an item or SkuID will exist in more than one promotion, however, our application is currently not intelligent enough to determine which promotion to use, so it sets the active promotion based on the StartDate being before other promotions' StartDate and the EndDate being after other promotions' EndDate.
I want to find all promoid's where a sku exists in more than one promotion. I want to signify which promotion is active, using 1 as the first active promotion, 2 as the next active, 3 as the next, etc. To determine which promotion is the first active promotion, the StartDate must be before any of the other promotions' StartDate, and the EndDate must be after other promotions' EndDate. If the promotions' StartDate is after the other promotions' StartDate but not before the other promotions' EndDate, and the EndDate is before or on other promotions' EndDate, then that's the second active promotion. If the StartDate is the same as other promotions' StartDate, but the EndDate is before other promotions' EndDate, then that's the third active promotion.
For example:
PromoID StartDate EndDate
------- --------- -------
PROMO1 1/1/2004 1/1/2006 (1st Active Promotion)
PROMO2 2/1/2004 1/1/2006 (2nd Active Promotion)
PROMO3 1/1/2004 12/1/2005 (3rd Active Promotion)
Here's a query I am using to display all active promotions:
select
pl.promoid,
pr.startdate,
pr.enddate,
pl.locid,
pl.skuid,
pl.promoprice,
pl.disclevel
from
promolocation pl
inner join
promotion pr
on
pl.promoid = pr.promoid
where
pr.enddate >= getdate()
Thanks for your help.
D
I have a column in the table which contains below values
Range
XXXX100
xxxx101
xxxx102
...
xxxx1020
below values are strings. I tried using below query but it does not return all values in the range.
Select * from table where Range Between 'XXXX100' AND 'xxxx1020'
May be in need to extract the number to display the values in given range.
I'm working through the SSIS tutorial, and am on lesson 2.
This says
"Double-click Foreach File in Folder to reopen the Foreach Loop Editor.
Click Collection.
On the Collection page, select Foreach File Enumerator."
The drop down only contains
foreach ado enumerator
foreach ado.net schema_rowset.enumerator
foreach from variable.enumerator
foreach nodelist.enumerator
foreach smo.enumerator
How do I get the "foreach file in folder" to appear in the drop down list?
Gary
Hi,
I am facing with the following problem.
I am using bar chart to display my report.
My MDX query is as follows:
SELECT
NON EMPTY { [Measures].[SUM_COUNT] } ON COLUMNS,
TopCount ( Filter ( {[DIM].[NAME].[NAME]}, [Measures].[SUM_COUNT] <> 0 ) , 10, [Measures].[SUM_COUNT] ) ON ROWS
FROM
[USAGE]
where <criteria>
I want to show the topmost 10 records. For some criteria I get the results in the chart.
But for some criteria or say for wrong criteria, there are no records. In such a case the X-axis contains all values for {[DIM].[NAME].[NAME] and value for the Y-axis is all 0. Its kind of blank report it will restrict to 10 records.
In such a scenario I want to show a message to the user saying "No records found", which I have set in the No Rows property of the chart.
If I remove the TopCount clause then I get the above message, which is obvious.
So how do I acheive the same message but at the same time limiting the records to 10?
How can I acheive this in my scenario? Can something be done at the query end?
any help is appreciated.
Thanks in advance!
We have some requirement in PowerBI reports. Here we have a table and having Date, Events columns. Below is the sample data..we are creating a measure to calculate the average of the event count for month.We need a measure for calculating Average of Event count per month= sum(Events for a month)/numberofdays in the month.Example for January month : sum(343423)/31 (31 number of days in January)
When we write this measure using DAX query in Excel we are getting semantic error.Tried sample formula : Average:=SUM([Events])/EOMONTH([EventDate],1)
writing this DAX command for measure.After having this data ready, we are creating PowerBI reports on this data.
I have a sales tables which looks as below.
DEPARTMENT
Barnd_Name
Item_Group
S_DATE
S_AMOUNT
Administration
IBM
[code]....
Now i need Month Wise Running Totals.but i should check the following group as show below i that order
1) DEPARTMENT
1) Brand
3) Item Group
4) Month
I have a new installation of SQL Server 2000 Dev Edition on a Win2K3 Standard Edition Server that I used for development. I just set this machine up in th last week and installed all Win2K3 patches and then installed SQL2K and SP3a. I have a single named instance. I just noticed today that I cannot view table data or use the Query part of EM. When I right click a table and select Open Table->Return All Rows it gives me an error dialog "An unexpected error happened during this operation". While the EM is diplaying this dialog the EM screen looks like Internet Explorer and says "Action Canceled - You might not have permission to view this directory or page using the credentials you supplied." I believe that this is a EM issue as I cannot view table content on other remote server. ANy ideas? Might this be an IE security patch disallowing some connectivity ?--Frank--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedI'm using the query desinger in ASP.NET , however the number of recordsin the resultset are not displaying, so I cut and paste it into Queryanalyzer which is silly.How do I set this in the output window, or result grid?Thanks Moe
View 1 Replies View Related