Problem Query For Records For Previous Month
May 23, 2008
I'm working on project for school that involves building a query in a video store database. The query is suppose to pull the total number of movies rented the previous month. I can get it to work if I physically put in the dates. However, part of the requirements is to set it up so the date range is auto calculated. The following is the code I have
SELECT COUNT(RecordNumber) AS TotalRentalsForMonth FROM RentalHistory
WHERE TransactionDate BETWEEN (YEAR(getdate()), MONTH(getdate()), 1)
AND (YEAR(getdate()), MONTH(getdate())+1, 0)
I get the following error message when I try to run it:
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ','.
Anyone have an idea where my mistake is within the date range
View 1 Replies
ADVERTISEMENT
Jan 11, 2005
I'm storing records that contain a date/time data type. I am needing two links on a reports page (asp), the first should return all records for the current month and the second link should return all records for the last three months (including current month). I have no idea how to just sort by month.
I'm also not sure what to include here in this post to help you answer my question. On the form that is submitted initially the text field is named "txtSubmitDate" and in the database it's stored in a field called "submitdate" and is 8 characters in length.
I've tried:
'SELECT TODAY'S MONTH
SqlJunk = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE())-1"
'SELECT TODAY'S MONTH and the last 2 months
SqlJunk2 = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE()) OR MONTH(submitdate) = MONTH(GETDATE())-1 OR MONTH(submitdate) = MONTH(GETDATE())-2 ORDER BY submitdate ASC"
These are not working because it can't handle the change in year (going from january 2005 back to december 2004, etc).
Any ideas?
View 7 Replies
View Related
Dec 12, 2013
I have my sql tables and query as shown below :
CREATE TABLE #ABC([Year] INT, [Month] INT, Stores INT);
CREATE TABLE #DEF([Year] INT, [Month] INT, SalesStores INT);
CREATE TABLE #GHI([Year] INT, [Month] INT, Products INT);
INSERT #ABC VALUES (2013,1,1);
INSERT #ABC VALUES (2013,1,2);
[code]....
I have @Year and @Month as parameters , both integers , example @Year = '2013' , @Month = '11'
SELECT T.[Year],
T.[Month]
-- select the sum for each year/month combination using a correlated subquery (each result from the main query causes another data retrieval operation to be run)
,
(SELECT SUM(Stores)
FROM #ABC
WHERE [Year] = T.[Year]
AND [Month] = T.[Month]) AS [Sum_Stores],
(SELECT SUM(SalesStores)
[code]....
What I want to do is to add more columns to the query which show the difference from the last month. as shown below. Example : The Diff beside the Sum_Stores shows the difference in the Sum_Stores from last month to this month.
Something like this :
+------+-------+------------+-----------------+-----|-----|---+-----------------
| Year | Month | Sum_Stores |Diff | Sum_SalesStores |Diff | Sum_Products |Diff|
+------+-------+------------+-----|------------+----|---- |----+--------------|
| 2013 | | | | | | | |
| 2013 | | | | | | | |
| 2013 | | | | | | | |
+------+-------+------------+-----|------------+--- |-----|----+---------| ----
View 3 Replies
View Related
Oct 18, 2007
Please refer to this table in this discussion:
Charges
Date
1
1/1/07
2
2/1/07
3
3/1/07
4
4/1/07
5
5/1/07
6
6/1/07
7
7/1/07
8
8/1/07
9
9/1/07
10
10/1/07
11
11/1/07
12
12/1/07
What i'm trying to do is return a result with total charges from 3 months previous based on a date parameter or just as a whole for that matter. For example:
If my date parameter is 6/14/07, i'd like my total charges to be 15 (6+5+4).
If my date parameter is 7/10/07, the charges would be 18 (7+6+5)
I hope that makes sense of where i'm going with this. I've played with this using the "Guru's Guide" solution by Ken Henderson, but still to no avail yet. Here's his code syntax:
Code Block
SELECT a.DayCount, a.Sales, SUM(b.Sales)
FROM Sales a CROSS JOIN Sales b
WHERE (b.DayCount <= a.DayCount) AS RunningTotal
GROUP BY a.DayCount,a.Sales
ORDER BY a.DayCount,a.Sales
Here is the result set i'm looking for:
Charges
Date
1
1/1/07
2
2/1/07
6
3/1/07
9
4/1/07
12
5/1/07
15
6/1/07
18
7/1/07
21
8/1/07
24
9/1/07
27
10/1/07
30
11/1/07
33
12/1/07
Each date's charges are a culmination of 3 months worth of charges.
Any help would be greatly appreciated. I'll be trying to figure this one out concurrently and if i do, i'll post back!
Thanks in advance!
View 6 Replies
View Related
Dec 22, 2007
how can i do this
search between 2 rows
day before Last day of the Previous Month + day Last day of the Previous Month"
Code BlockSELECT empid, basedate, unit_date, shift, na
FROM dbo.empbase
WHERE (basedate = DATEADD(d, - 2, DATEADD(mm, DATEDIFF(m, 0, GETDATE()), 0))) AND (shift = 5)
AND
(basedate = DATEADD(d, - 1, DATEADD(mm, DATEDIFF(m, 0, GETDATE()), 0))) AND (shift = 1)
TNX
View 5 Replies
View Related
Sep 10, 2013
Need getting a query which I will get previous year, previous month first day everytime i run the query.
Ex: If i run the script on 9/10/2013 then result should be 8/1/2012. (MM/DD/YYYY)
View 4 Replies
View Related
Jun 7, 2000
Hi Friends
do you have any soluyion or function for last day of Previous Month
thanks
Nilesh
View 1 Replies
View Related
Jul 20, 2005
How can i calculate the last day of the previous month?Help me,please
View 3 Replies
View Related
Aug 29, 2007
Newbie question. I am using a query that pulls month-to-date data that has the following where clause:
WHERE (MONTH(datefield) = MONTH(GETDATE())) AND (YEAR(datefield) = YEAR(GETDATE()))
this works just fine but what I would like for it to do is give me the previous month of data if the if it's
the first day of the month and then any other day give me month to date. Is this possible?
Thanks in advance,
Marco
View 12 Replies
View Related
Oct 8, 2015
Im trying to get query by selecting the month from dropdownlist and display the records .by using the below query I need to enter the date in tecxtboc then it will show the output
select Standard, Total, MonthName
from (SELECT Standard, COUNT(Standard) AS Total,
datename(month, ReportDate) as [MonthName]
FROM CPTable where
ReportDate >= @ReportDate
[Code] .....
View 5 Replies
View Related
Aug 4, 2015
We have some requirement in PowerBI reports. Here we have a table and having Date, Events columns. Below is the sample data..we are creating a measure to calculate the average of the event count for month.We need a measure for calculating Average of Event count per month= sum(Events for a month)/numberofdays in the month.Example for January month : sum(343423)/31 (31 number of days in January)
When we write this measure using DAX query in Excel we are getting semantic error.Tried sample formula : Average:=SUM([Events])/EOMONTH([EventDate],1)
writing this DAX command for measure.After having this data ready, we are creating PowerBI reports on this data.
View 6 Replies
View Related
Jul 10, 2013
I can get the name of the month by doing this...
SELECT
Datename(month,getdate()) as monthName
But I am not able to get the previous Month? How can I do that I thought by putting -1 it would do that for me, but it doesn't.
View 3 Replies
View Related
Jul 23, 2005
Hi there,See if you can help me with the following:I need to write an SQL code that will return me:The 1st day & the Last day of the Previous Month in the following format(smalldatetime):yyyy-mm-dd hh:mi:ss (24h)Regards,--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200507/1
View 5 Replies
View Related
Jan 18, 2007
Hi!I have a query that has to return bunch of data based on the calendarmonth. I have to make sure that it will return data to me for 28 daysif it is February and for 31 if it is August(for example). I need tobe able to execute it every first of every month for the past 30, 31 or28 days based on the calendar month. Is there a function or a storedprocedure that I can use to do that?Thank you,T.
View 5 Replies
View Related
May 10, 2007
Hi,I have a requirement to design a query that identifies items soldbetween two dates. There is a 'SoldDate' datetime field used toregister what date the item was sold.The query needs to identify all sales between the last day of theprevious month and going back one year.What I would like to do is to design a query / stored procedure thatwill dynamically create the criteria to allow the client to simply runthe query or stored proc.I know how to establish the last day of the previous month part, I'mjust not sure of how best to design the remainder of the query.Thank in advance
View 9 Replies
View Related
Aug 15, 2006
I need start and end date of previous month, such as StartDate=07/01/2006 and EndDate=07/31/2006 for currentdate 08/156/2006
How can I do this?
View 1 Replies
View Related
Feb 10, 2014
I have table 'Open_Months' as shown below
Emp_IdMonthYear
00FBG 42013
I need current month and previous 2 months, for this i have concatinated month and year column into date formate, the query for this as shown below
SELECT cast(CONVERT(datetime, CONVERT(varchar(4), OM_Year) + RIGHT('0' + CONVERT(varchar(2), OM_Month), 2) + '01', 112) AS Datetime) from Open_Months where OM_Emp_ID = '00FBG'
Date
2013-04-01
From the above date I need to find current month and its previous 2 months.
View 1 Replies
View Related
Aug 15, 2006
I need start and end date of previous month, such as StartDate=07/01/2006 and EndDate=07/31/2006 for currentdate 08/156/2006
How can I do this?
View 6 Replies
View Related
Apr 9, 2008
I have a CheckDate field and I only what to retrieve dates that fall in the month previous to when the query is run. I'm assuming it will involve DATEADD or DATEPART, but I'm not sure how to do it since the end of the month day will vary from month to month.
For example, today is 04/09/2008 so I want to retrieve checks with a date between 03/01/2008 and 03/31/2008.
View 13 Replies
View Related
Dec 10, 2010
How to get First day of previous month and last day of previous month(From getdate()) using SQL..?
View 13 Replies
View Related
Nov 14, 2007
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
Thanks
View 1 Replies
View Related
May 17, 2007
I have two parameters in my report (StartDate and EndDate). I want to default these parameters to the previous month.
For example... If today is 5/17/2007, I want StartDate to be 4/1/2007 and EndDate to be 4/30/2007. If today would be January 30th 2007, I would want StartDate to be 12/1/2006 and EndDate to be 12/31/2006.
How can I do this?
View 2 Replies
View Related
Nov 14, 2007
hi,
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
Thanks
View 3 Replies
View Related
Oct 29, 2015
I am trying to pick up the customers invoiced twice or more within a month. In the case below Pepsi Cola and Jack Daniel were invoiced twice in October. The query need to pickup the previous month, se being in October I need to pick up the invoice of September.
create table #forum (Customer varchar(20),Invoiced date)
insert into #forum values ('Pepsi Cola','2015-09-01') ,('Pepsi Cola','2015-09-06') ,
('Pepsi Cola','2015-10-01') ,('Pepsi Cola','2015-10-02') ,('Pepsi Cola','2015-11-01') ,
('Ferrarelle','2015-09-01') ,('Ferrarelle','2015-10-01') ,('Ferrarelle','2015-11-16') ,('Ferrarelle','2015-11-01') ,
('Jack Daniel','2015-09-01') ,('Jack Daniel','2015-09-04') ,('Jack Daniel','2015-09-06') ,('Jack Daniel','2015-09-30') ,
('Jack Daniel','2015-10-01') ,('Jack Daniel','2015-10-18') ,('Jack Daniel','2015-11-01') ,
('Bud','2015-09-01') ,('Bud','2015-10-01') ,('Bud','2015-11-01')
select * from #forum
View 5 Replies
View Related
Nov 3, 1999
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
Ali
View 2 Replies
View Related
Mar 25, 2014
I'm trying to write some T-SQL to return the previous even numbered month and appropriate year from given date.
Examples given:
03-25-2014 should return 02-xx-2014
01-01-2014 should return 12-xx-2013
View 2 Replies
View Related
Mar 25, 2014
I have 12 month report and I need show volume and difference between current and prev month volume, what is the smart way to do this, do I need to put prev month value onto same row horizontally? I think should be some other smart way, I heard about LEAD function?
This what I think for now, It should be listed per ClientID also, in my example I have single ClientID for simplicity.
I tried to do LEAD but with not success..
/*
IF OBJECT_ID('tempdb..#t') is not null drop table #T;
WITH R(N) AS
(SELECT 1 UNION ALL SELECT N+1 FROM R WHERE N <= 12 )
SELECT N as Rn,
10001 ClientID,
DATENAME(MONTH,DATEADD(MONTH,-N,GETDATE())) AS [Month],
[code]....
View 2 Replies
View Related
Jul 28, 2014
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
View 1 Replies
View Related
Jan 9, 2008
I have got a table with GUID (PK), COMPANY, CONTACT. There are going to be instances where the company name is the same on multiple records.
What i am trying to do is work out what is the next and previous record
The data is going to be sorted, by COMPANY then GUID.
I am think a stored procedure would be the best to combact this, but very usure how to go about writing it, so i passed the present company and GUID values to it.
Any help would be appreciated, and thanks in advance.
View 20 Replies
View Related
Jul 13, 2005
On a webform, I have three button ... [7 days] [15 days] [30 days]When the user clicks one of the buttons, I want to return their orders for the past X days. The WHERE clause would include something like this (for 7 days):WHERE (Order_Date BETWEEN CONVERT(DATETIME, GETDATE() - 7, 102) AND CONVERT(DATETIME, GETDATE(), 102))How do I parameterize the number of days?Thanks,Tim
View 2 Replies
View Related
Oct 20, 2014
I am having a table which contains data of students like:
StudentID,StudentName,Term,RESult.
Sample data :
StudentID,StudentName,Term,RESult.
1,ABC,Term1,Pass
1,ABC,Term2,Fail
1,ABC,Term3,Pass
1,ABC,Term4,Pass
1,ABC,Term5,Pass
Now i want to compare Result and dislay prevterm where student fail:
Now my output would be as: Now I want to compare latest term i.e. Term5 with prev Terms and if found Mismatch in result then i want to display as below:
studentID PrevFailTerm, CurrentTerm
1,Term2,Term5
View 1 Replies
View Related
May 15, 2008
I have an sub-period end-date column, in a row set of (let's say) 2 records.
How Can I grab a previous record and use it's SUB_PD_END_DT
to add a day and get the current record's sub period beginning date?
i.e.
row 1 = col1, col2, SUB_PD_END_DT = (2008-05-02)
row 2 = col1, col2, SUB_PD_END_DT = (2008-05-09)
therefore, row 2 = SUB_PD_start_DT = (2008-05-03)
Any help would be great.
Thanks
JDA
View 9 Replies
View Related
May 5, 2015
I have two tables. Users and records. I need to select only the users that not has lines recorded in the other table. How could I do that?
Example:
ID| Name| Access 1|Access 2|
----------------------------
1 | Axel | True |False |
2 | Ivan | False |False |
3 | Bob | True |False |
4 | Sue | False |False |
ID| Points| Month| Year|User_1|User_2|
--------------------------------------
1 | 2 | 5 | 2015| 2 | 1 |
2 | 5 | 5 | 2015| 2 | 1 |
3 | 1 | 5 | 2015| 3 | 1 |
Then I want to run a select in the users table, only with the users that hasn't records in the second table.
In the example, the second table has User_1 as the user who receives the points and the User_2 is the user who give the points. Then I would know what user didn't receive 'points' yet.
View 3 Replies
View Related
