I have two parameters in my report (StartDate and EndDate). I want to default these parameters to the previous month.
For example... If today is 5/17/2007, I want StartDate to be 4/1/2007 and EndDate to be 4/30/2007. If today would be January 30th 2007, I would want StartDate to be 12/1/2006 and EndDate to be 12/31/2006.
How can I do this?
I have a CheckDate field and I only what to retrieve dates that fall in the month previous to when the query is run. I'm assuming it will involve DATEADD or DATEPART, but I'm not sure how to do it since the end of the month day will vary from month to month.
For example, today is 04/09/2008 so I want to retrieve checks with a date between 03/01/2008 and 03/31/2008.
I need start and end date of previous month, such as StartDate=07/01/2006 and EndDate=07/31/2006 for currentdate 08/156/2006
How can I do this?
I need start and end date of previous month, such as StartDate=07/01/2006 and EndDate=07/31/2006 for currentdate 08/156/2006
How can I do this?
I've SSRS sales report to which I need to pass the dates for previous month's start date and end date which I am able to pass using below code. However, since the sales report has data from the past year(2014) I need to pass the dates for last year as well. The below code gives StartDate1 as 2015-02-01 and EndDate1 as 2015-02-28. I need to get the dates for past year like 2014-02-01 as StartDate2 and 2014-02-28 as EndDate2
SELECT DATEADD(MONTH, DATEDIFF(MONTH, '19000201', GETDATE()), '19000101') AS StartDate1,
DATEADD(MONTH, DATEDIFF(MONTH, '19000101', GETDATE()), '18991231') AS EndDate1
Hi all,
I am trying to use the custom code in the report but I don't think I am understanding how this is being used.
I have a function to get starting months for a report parameter.
The function is below:-
--------------------------------------------------------------
Shared Function GetStartingMonths() as String
dim strDefault as string
dim CurrentMonth as String
Dim SqlString as String
'strDefault = Month(Now) & "/1/" & Year(Now)
CurrentMonth = "5/1/2002"
Do While CDate(CurrentMonth) <= Now
SqlString = SqlString + "Select " & CurrentMonth & " as value, " & MonthName(Month(CurrentMonth)) & " " & Year(CurrentMonth) & " as MonthYear"
CurrentMonth = dateadd("m",1,CDate(CurrentMonth))
if Cdate(CurrentMonth) = Now then
Exit Do
else
sqlString = SqlString & " Union "
end if
Loop
return SqlString
End Function
---------------------------------------------------------------
what i am trying to do here, and hopefully produce a sql string that would fill my dataset of dates and their representation.
In the dataset, I had put the following expression
=Code.GetStartingMonths()
However, I can't seem to get the parameter to display the dates. shows up as disabled in my report.
Am I doing something wrong here or is there a better way to doing this ?
Additionally, I was wondering whether there is a better SQL code that would achieve the same thing I am doing ?
thanks !
Bernard Ong
I have a date dimension set in the SSAS Cube. I have been trying get quarter,year,month,semester start and end dates using ClosingPeriod() and OpeningPeriod() functions but not getting the exact value. How the get correct dates for a given date.
View 2 Replies View RelatedI've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
how can i do this
search between 2 rows
day before Last day of the Previous Month + day Last day of the Previous Month"
Code BlockSELECT empid, basedate, unit_date, shift, na
FROM dbo.empbase
WHERE (basedate = DATEADD(d, - 2, DATEADD(mm, DATEDIFF(m, 0, GETDATE()), 0))) AND (shift = 5)
AND
(basedate = DATEADD(d, - 1, DATEADD(mm, DATEDIFF(m, 0, GETDATE()), 0))) AND (shift = 1)
TNX
Need getting a query which I will get previous year, previous month first day everytime i run the query.
Ex: If i run the script on 9/10/2013 then result should be 8/1/2012. (MM/DD/YYYY)
following table global_usage
ID varchar (contains alphanumeric values,not unique)
Territory (combined with ID unique)
Total_Used int can be null
Date_ date (date of the import of the data)
ID Territory Total_Used Date_
ACASC CAL071287 2014-06-01
ACASC CAL071287 2014-08-01
ACASC CAL071288 2014-09-01
[Code] .....
Now the problem,per month I need the most recent value so I'm expecting
ACASC CAL071287 2014-06-01
ACASC CAL071287 2014-08-01
ACASC CAL071288 2014-09-01
ACASC CAL071288 2014-11-01
ACASC CAL071190 2014-12-14
ACASC CAL071286 2015-01-22
ACASC CAL071165 2015-02-01
ACASC CAL071164 2015-03-01
I've tried a few thing like group,having even row_number() but I keep getting wrong results
Hi Friends
do you have any soluyion or function for last day of Previous Month
thanks
Nilesh
How can i calculate the last day of the previous month?Help me,please
View 3 Replies View RelatedNewbie question. I am using a query that pulls month-to-date data that has the following where clause:
WHERE (MONTH(datefield) = MONTH(GETDATE())) AND (YEAR(datefield) = YEAR(GETDATE()))
this works just fine but what I would like for it to do is give me the previous month of data if the if it's
the first day of the month and then any other day give me month to date. Is this possible?
Thanks in advance,
Marco
I can get the name of the month by doing this...
SELECT
Datename(month,getdate()) as monthName
But I am not able to get the previous Month? How can I do that I thought by putting -1 it would do that for me, but it doesn't.
Hi there,See if you can help me with the following:I need to write an SQL code that will return me:The 1st day & the Last day of the Previous Month in the following format(smalldatetime):yyyy-mm-dd hh:mi:ss (24h)Regards,--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200507/1
View 5 Replies View RelatedHi!I have a query that has to return bunch of data based on the calendarmonth. I have to make sure that it will return data to me for 28 daysif it is February and for 31 if it is August(for example). I need tobe able to execute it every first of every month for the past 30, 31 or28 days based on the calendar month. Is there a function or a storedprocedure that I can use to do that?Thank you,T.
View 5 Replies View RelatedHi,I have a requirement to design a query that identifies items soldbetween two dates. There is a 'SoldDate' datetime field used toregister what date the item was sold.The query needs to identify all sales between the last day of theprevious month and going back one year.What I would like to do is to design a query / stored procedure thatwill dynamically create the criteria to allow the client to simply runthe query or stored proc.I know how to establish the last day of the previous month part, I'mjust not sure of how best to design the remainder of the query.Thank in advance
View 9 Replies View RelatedI have table 'Open_Months' as shown below
Emp_IdMonthYear
00FBG 42013
I need current month and previous 2 months, for this i have concatinated month and year column into date formate, the query for this as shown below
SELECT cast(CONVERT(datetime, CONVERT(varchar(4), OM_Year) + RIGHT('0' + CONVERT(varchar(2), OM_Month), 2) + '01', 112) AS Datetime) from Open_Months where OM_Emp_ID = '00FBG'
Date
2013-04-01
From the above date I need to find current month and its previous 2 months.
How to get First day of previous month and last day of previous month(From getdate()) using SQL..?
View 13 Replies View RelatedI'm storing records that contain a date/time data type. I am needing two links on a reports page (asp), the first should return all records for the current month and the second link should return all records for the last three months (including current month). I have no idea how to just sort by month.
I'm also not sure what to include here in this post to help you answer my question. On the form that is submitted initially the text field is named "txtSubmitDate" and in the database it's stored in a field called "submitdate" and is 8 characters in length.
I've tried:
'SELECT TODAY'S MONTH
SqlJunk = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE())-1"
'SELECT TODAY'S MONTH and the last 2 months
SqlJunk2 = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE()) OR MONTH(submitdate) = MONTH(GETDATE())-1 OR MONTH(submitdate) = MONTH(GETDATE())-2 ORDER BY submitdate ASC"
These are not working because it can't handle the change in year (going from january 2005 back to december 2004, etc).
Any ideas?
I'm working on project for school that involves building a query in a video store database. The query is suppose to pull the total number of movies rented the previous month. I can get it to work if I physically put in the dates. However, part of the requirements is to set it up so the date range is auto calculated. The following is the code I have
SELECT COUNT(RecordNumber) AS TotalRentalsForMonth FROM RentalHistory
WHERE TransactionDate BETWEEN (YEAR(getdate()), MONTH(getdate()), 1)
AND (YEAR(getdate()), MONTH(getdate())+1, 0)
I get the following error message when I try to run it:
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ','.
Anyone have an idea where my mistake is within the date range
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
Thanks
hi,
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
Thanks
I am trying to pick up the customers invoiced twice or more within a month. In the case below Pepsi Cola and Jack Daniel were invoiced twice in October. The query need to pickup the previous month, se being in October I need to pick up the invoice of September.
create table #forum (Customer varchar(20),Invoiced date)
insert into #forum values ('Pepsi Cola','2015-09-01') ,('Pepsi Cola','2015-09-06') ,
('Pepsi Cola','2015-10-01') ,('Pepsi Cola','2015-10-02') ,('Pepsi Cola','2015-11-01') ,
('Ferrarelle','2015-09-01') ,('Ferrarelle','2015-10-01') ,('Ferrarelle','2015-11-16') ,('Ferrarelle','2015-11-01') ,
('Jack Daniel','2015-09-01') ,('Jack Daniel','2015-09-04') ,('Jack Daniel','2015-09-06') ,('Jack Daniel','2015-09-30') ,
('Jack Daniel','2015-10-01') ,('Jack Daniel','2015-10-18') ,('Jack Daniel','2015-11-01') ,
('Bud','2015-09-01') ,('Bud','2015-10-01') ,('Bud','2015-11-01')
select * from #forum
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
Ali
I'm trying to write some T-SQL to return the previous even numbered month and appropriate year from given date.
Examples given:
03-25-2014 should return 02-xx-2014
01-01-2014 should return 12-xx-2013
I have 12 month report and I need show volume and difference between current and prev month volume, what is the smart way to do this, do I need to put prev month value onto same row horizontally? I think should be some other smart way, I heard about LEAD function?
This what I think for now, It should be listed per ClientID also, in my example I have single ClientID for simplicity.
I tried to do LEAD but with not success..
/*
IF OBJECT_ID('tempdb..#t') is not null drop table #T;
WITH R(N) AS
(SELECT 1 UNION ALL SELECT N+1 FROM R WHERE N <= 12 )
SELECT N as Rn,
10001 ClientID,
DATENAME(MONTH,DATEADD(MONTH,-N,GETDATE())) AS [Month],
[code]....
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
This code displays dates, File name, and File size for four seperate dates 11/20/2007 , 11/30/2007, 12/30/2007 and 01/31/2007 . I'm trying to show the percentage growth from date to date (ie 11/20/2007 -11/30/2007 percentage growth)
is there a way i can get the previous date file size for each entry, so i can have a variable for the calculation. Or i can get the calculate it within this code (ie database_size_mb / ((database_size_md ) where database_size_datetime -1) *100
or whatever the formula is for percentage growth.
Code Snippet
SELECT
Database_Size_Datetime,
Database_file_name,
Database_Size_Mb
FROM RC_STAT.dbo.Tbl_Database_Statistics AS Tbl_Database_Statistics_1
GROUP BY Database_Size_Datetime, Database_file_name, Database_Size_Mb
this is what it displays now:
2007-11-20 00:00:00.000 ACTReplication_Data 442.5000
2007-11-30 00:00:00.000 ACTReplication_Data 442.5000
2007-12-31 00:00:00.000 ACTReplication_Data 442.5000
2008-01-31 00:00:00.000 ACTReplication_Data 442.5000
2007-11-20 00:00:00.000 ACTReplication_Log 14.8125
2007-11-30 00:00:00.000 ACTReplication_Log 109.7500
2007-12-31 00:00:00.000 ACTReplication_Log 112.9375
2008-01-31 00:00:00.000 ACTReplication_Log 115.5625
2007-11-20 00:00:00.000 BAMArchive 0.6875
2007-11-30 00:00:00.000 BAMArchive 0.6875
2007-12-31 00:00:00.000 BAMArchive 0.6875
2008-01-31 00:00:00.000 BAMArchive 0.6875
2007-11-20 00:00:00.000 BAMArchive_log 0.4922
2007-11-30 00:00:00.000 BAMArchive_log 0.4922
2007-12-31 00:00:00.000 BAMArchive_log 0.4922
2008-01-31 00:00:00.000 BAMArchive_log 0.4922
I am working with a stored procedure that needs to roll up a week number column once a week - columns are numbered 1-10, 1 being this week, 2 being last week and so forth
Once a week the 10th column is deleted, the 9th becomes 10, the 8th becomes the 9th and so forth and the 1st is calculated the week numbers are getting all screwed up - and we think it's because one statement starts before the one before it completes the statements go like this:
delete theTable where week_num=10;
update theTable set weeknum=10 where weeknum=9;
update theTable set weeknum=9 where weeknum=8;
and so forth
is that the reason? is there any way not to start one statement until the one before it finishes?
I have my sql tables and query as shown below :
CREATE TABLE #ABC([Year] INT, [Month] INT, Stores INT);
CREATE TABLE #DEF([Year] INT, [Month] INT, SalesStores INT);
CREATE TABLE #GHI([Year] INT, [Month] INT, Products INT);
INSERT #ABC VALUES (2013,1,1);
INSERT #ABC VALUES (2013,1,2);
[code]....
I have @Year and @Month as parameters , both integers , example @Year = '2013' , @Month = '11'
SELECT T.[Year],
T.[Month]
-- select the sum for each year/month combination using a correlated subquery (each result from the main query causes another data retrieval operation to be run)
,
(SELECT SUM(Stores)
FROM #ABC
WHERE [Year] = T.[Year]
AND [Month] = T.[Month]) AS [Sum_Stores],
(SELECT SUM(SalesStores)
[code]....
What I want to do is to add more columns to the query which show the difference from the last month. as shown below. Example : The Diff beside the Sum_Stores shows the difference in the Sum_Stores from last month to this month.
Something like this :
+------+-------+------------+-----------------+-----|-----|---+-----------------
| Year | Month | Sum_Stores |Diff | Sum_SalesStores |Diff | Sum_Products |Diff|
+------+-------+------------+-----|------------+----|---- |----+--------------|
| 2013 | | | | | | | |
| 2013 | | | | | | | |
| 2013 | | | | | | | |
+------+-------+------------+-----|------------+--- |-----|----+---------| ----
Please refer to this table in this discussion:
Charges
Date
1
1/1/07
2
2/1/07
3
3/1/07
4
4/1/07
5
5/1/07
6
6/1/07
7
7/1/07
8
8/1/07
9
9/1/07
10
10/1/07
11
11/1/07
12
12/1/07
What i'm trying to do is return a result with total charges from 3 months previous based on a date parameter or just as a whole for that matter. For example:
If my date parameter is 6/14/07, i'd like my total charges to be 15 (6+5+4).
If my date parameter is 7/10/07, the charges would be 18 (7+6+5)
I hope that makes sense of where i'm going with this. I've played with this using the "Guru's Guide" solution by Ken Henderson, but still to no avail yet. Here's his code syntax:
Code Block
SELECT a.DayCount, a.Sales, SUM(b.Sales)
FROM Sales a CROSS JOIN Sales b
WHERE (b.DayCount <= a.DayCount) AS RunningTotal
GROUP BY a.DayCount,a.Sales
ORDER BY a.DayCount,a.Sales
Here is the result set i'm looking for:
Charges
Date
1
1/1/07
2
2/1/07
6
3/1/07
9
4/1/07
12
5/1/07
15
6/1/07
18
7/1/07
21
8/1/07
24
9/1/07
27
10/1/07
30
11/1/07
33
12/1/07
Each date's charges are a culmination of 3 months worth of charges.
Any help would be greatly appreciated. I'll be trying to figure this one out concurrently and if i do, i'll post back!
Thanks in advance!