I'm storing records that contain a date/time data type. I am needing two links on a reports page (asp), the first should return all records for the current month and the second link should return all records for the last three months (including current month). I have no idea how to just sort by month.
I'm also not sure what to include here in this post to help you answer my question. On the form that is submitted initially the text field is named "txtSubmitDate" and in the database it's stored in a field called "submitdate" and is 8 characters in length.
I've tried:
'SELECT TODAY'S MONTH
SqlJunk = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE())-1"
'SELECT TODAY'S MONTH and the last 2 months
SqlJunk2 = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE()) OR MONTH(submitdate) = MONTH(GETDATE())-1 OR MONTH(submitdate) = MONTH(GETDATE())-2 ORDER BY submitdate ASC"
These are not working because it can't handle the change in year (going from january 2005 back to december 2004, etc).
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
12/1/07 What i'm trying to do is return a result with total charges from 3 months previous based on a date parameter or just as a whole for that matter. For example:
If my date parameter is 6/14/07, i'd like my total charges to be 15 (6+5+4). If my date parameter is 7/10/07, the charges would be 18 (7+6+5)
I hope that makes sense of where i'm going with this. I've played with this using the "Guru's Guide" solution by Ken Henderson, but still to no avail yet. Here's his code syntax:
Code Block
SELECT a.DayCount, a.Sales, SUM(b.Sales) FROM Sales a CROSS JOIN Sales b WHERE (b.DayCount <= a.DayCount) AS RunningTotal GROUP BY a.DayCount,a.Sales ORDER BY a.DayCount,a.Sales Here is the result set i'm looking for:
Charges
Date
1
1/1/07
2
2/1/07
6
3/1/07
9
4/1/07
12
5/1/07
15
6/1/07
18
7/1/07
21
8/1/07
24
9/1/07
27
10/1/07
30
11/1/07
33
12/1/07 Each date's charges are a culmination of 3 months worth of charges.
Any help would be greatly appreciated. I'll be trying to figure this one out concurrently and if i do, i'll post back!
I'm working on project for school that involves building a query in a video store database. The query is suppose to pull the total number of movies rented the previous month. I can get it to work if I physically put in the dates. However, part of the requirements is to set it up so the date range is auto calculated. The following is the code I have
SELECT COUNT(RecordNumber) AS TotalRentalsForMonth FROM RentalHistory WHERE TransactionDate BETWEEN (YEAR(getdate()), MONTH(getdate()), 1) AND (YEAR(getdate()), MONTH(getdate())+1, 0)
I get the following error message when I try to run it:
Msg 102, Level 15, State 1, Line 2 Incorrect syntax near ','.
Anyone have an idea where my mistake is within the date range
I have a scenario to compare previous records based on each ID columns. For each ID, there would be few records, I have a column called "compare", We have to compare all Compare 1 records with Compare 0 Records. If Dt is lesser or equal to comparing DT, then show 0. Else 1
We always only one Compare 0 records in my table, so all compare 1 columns will compare with only one row per ID
My tables look like
Declare @tab1 table (ID Varchar(3), Dt Date, Compare Int) Insert Into @tab1 values ('101','2015-07-01',0) Insert Into @tab1 values ('101','2015-07-02',1) Insert Into @tab1 values ('101','2015-07-03',1) Insert Into @tab1 values ('101','2015-07-01',1) Insert Into @tab1 values ('101','2015-06-30',1)
Insert Into @tab1 values ('102','2015-07-01',0) Insert Into @tab1 values ('102','2015-07-02',1) Insert Into @tab1 values ('102','2015-07-01',1)
select * from @tab1
1.) In the above scenario for ID = '101', we have 5 records, first record has Compare value 0, which mean all other 4 records need to compare with this record only
2.) If Compare 1 record's Dt is less or equal to Compare 0's DT, then show 0 in next column
3.) If Compare 1 record's Dt is greater than Compare 0's DT, then show 1 in next column
Newbie question. I am using a query that pulls month-to-date data that has the following where clause:
WHERE (MONTH(datefield) = MONTH(GETDATE())) AND (YEAR(datefield) = YEAR(GETDATE()))
this works just fine but what I would like for it to do is give me the previous month of data if the if it's the first day of the month and then any other day give me month to date. Is this possible?
Hi there,See if you can help me with the following:I need to write an SQL code that will return me:The 1st day & the Last day of the Previous Month in the following format(smalldatetime):yyyy-mm-dd hh:mi:ss (24h)Regards,--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200507/1
Hi!I have a query that has to return bunch of data based on the calendarmonth. I have to make sure that it will return data to me for 28 daysif it is February and for 31 if it is August(for example). I need tobe able to execute it every first of every month for the past 30, 31 or28 days based on the calendar month. Is there a function or a storedprocedure that I can use to do that?Thank you,T.
Hi,I have a requirement to design a query that identifies items soldbetween two dates. There is a 'SoldDate' datetime field used toregister what date the item was sold.The query needs to identify all sales between the last day of theprevious month and going back one year.What I would like to do is to design a query / stored procedure thatwill dynamically create the criteria to allow the client to simply runthe query or stored proc.I know how to establish the last day of the previous month part, I'mjust not sure of how best to design the remainder of the query.Thank in advance
I have a CheckDate field and I only what to retrieve dates that fall in the month previous to when the query is run. I'm assuming it will involve DATEADD or DATEPART, but I'm not sure how to do it since the end of the month day will vary from month to month.
For example, today is 04/09/2008 so I want to retrieve checks with a date between 03/01/2008 and 03/31/2008.
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
I have two parameters in my report (StartDate and EndDate). I want to default these parameters to the previous month.
For example... If today is 5/17/2007, I want StartDate to be 4/1/2007 and EndDate to be 4/30/2007. If today would be January 30th 2007, I would want StartDate to be 12/1/2006 and EndDate to be 12/31/2006.
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
I am trying to pick up the customers invoiced twice or more within a month. In the case below Pepsi Cola and Jack Daniel were invoiced twice in October. The query need to pickup the previous month, se being in October I need to pick up the invoice of September.
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
I have 12 month report and I need show volume and difference between current and prev month volume, what is the smart way to do this, do I need to put prev month value onto same row horizontally? I think should be some other smart way, I heard about LEAD function?
This what I think for now, It should be listed per ClientID also, in my example I have single ClientID for simplicity.
I tried to do LEAD but with not success..
/* IF OBJECT_ID('tempdb..#t') is not null drop table #T; WITH R(N) AS (SELECT 1 UNION ALL SELECT N+1 FROM R WHERE N <= 12 ) SELECT N as Rn, 10001 ClientID, DATENAME(MONTH,DATEADD(MONTH,-N,GETDATE())) AS [Month],
I have @Year and @Month as parameters , both integers , example @Year = '2013' , @Month = '11'
SELECT T.[Year], T.[Month]
-- select the sum for each year/month combination using a correlated subquery (each result from the main query causes another data retrieval operation to be run) , (SELECT SUM(Stores) FROM #ABC WHERE [Year] = T.[Year] AND [Month] = T.[Month]) AS [Sum_Stores], (SELECT SUM(SalesStores)
[code]....
What I want to do is to add more columns to the query which show the difference from the last month. as shown below. Example : The Diff beside the Sum_Stores shows the difference in the Sum_Stores from last month to this month.
I use the following sql in a view to return the last payment date and amount made by clients. What I need is a way to return the payment date and amount for the payment prior to the last one. Any help is appreciated very much, SELECT dbo.tblPaymentReceipts.Client_ID, dbo.tblPaymentReceipts.PaymentDate AS LastPayDate, SUM(dbo.tblPaymentReceipts.AmountPaid) AS LastPayAmtFROM dbo.tblPaymentReceipts INNER JOIN (SELECT Client_ID, MAX(PaymentDate) AS LastPayDate FROM dbo.tblPaymentReceipts AS tblPaymentReceipts_1 GROUP BY Client_ID) AS A ON dbo.tblPaymentReceipts.Client_ID = A.Client_ID AND dbo.tblPaymentReceipts.PaymentDate = A.LastPayDateGROUP BY dbo.tblPaymentReceipts.Client_ID, dbo.tblPaymentReceipts.PaymentDate
I am trying to code a rule at the moment which sets a value based on the value of the previous row. This is as far as I have got so far. I am trying to run it as a set based command and I believe I may need to make use of a numbers table.
Anyway the code is....
declare @data table (ID int identity(1,1), DeviceID int, EventTypeID int, EventID int)
[Code] ....
So the output is currently incorrect. Each DeviceID needs to have a ID assigned to the MIN(ID) which isn't yet in the code above. This ID has to be sequential across the full table and not dependent on ID.
Next the rule is coded in the case statement above.
So for each DeviceID, when the EventType goes from 1, 2 or 4, to 0 or 3, the following record after the 0 or 3 will have a new EventID. And conversely when the EventType goes from 0 or 3 to 1,2, or 4, the record that is the 1, 2 or 4 will have a new EventID.
I need to return the previous row value if it is negative in current row. For example, in the below table for ID=7 i need the value 1305(ID=4) since 6,5 are negative values.
I am pretty new to SQL and facing difficulties with a current problem.
I have a list of customers and a sequence of events they have triggered . I know the sequence in which these events have been triggered and only want to increment a value when a new event is triggered (value to remain the same if the event is the same). I have come close to a solution with Dense_rank but the problem here is that the ranking doesn't reset if the same even previously triggered is triggered a bit later in the sequence. see below an example of current results and expected results:
I'm trying to only show yesterday's data based on a date that is stored as a varchar. I converted it to smalldatetime but I'm getting an error that says "Conversion failed when converting date and/or time from character string." I don't know how I have to alter the conversion.
