Trying To Export A Global Temp Table Using SSIS.

Mar 1, 2006

Senerio:

 

I have to extract data from a read only table using a globel temp table then export it to another OLE DB connection or to a flat file. But in the new SSIS packages it does not allow you to do thisusing the global ## symbols in front of a table name. How do I get around this?

 

Thanks


 

View 6 Replies


ADVERTISEMENT

Global Temp Table ....

Feb 24, 2005

Hi:

A regular permanent table is not an option:
Need to exec a procA which at the end also exec procB.

procA will insert to table A and also generate a intermidate result set to a ##A global table, it works fine at this point. However, when it exec the procB at the end of exec procA, the ##A global table is empty when entering procB.

The key is I want to pass a records set to the procB without using a tableTempB. Does a ## global table should be still alive until procB execution is done?

I also tried use table variable, but it does not look like to accept @tableA
as part of the procB's parameters.

Also tried function, but it could not support a #tempTable within it which will do a dynamic query insertion.

thanks
David

View 4 Replies View Related

Global Temp Table Permissions

Jul 23, 2005

I have a pivot table implementation, part of which is posted below. Itreturns no errors in query analyzer, but when profiler is run, it showsthat "Error 208" is happening. I looked that up in BOL and it meansthat an object doesn't exist. This block of code below works fine on mylocal development machine, but not on our shared development serveruntil I go into the tempdb and make the user have the role db_owner.Even wierder is that when I do a select * from ##pivot there is noerror, but if I specify the single column name (pivot) i.e. selectpivot from ##pivot, it takes the error...Obviously this is a rights issue, but is there any way around thisother than making the user owner of tempdb??declare @select varchar(8000), @PackageId intset @PackageId = 10set @select = 'selectCompany = COALESCE(Users.Company, Contact.Company, ''''),SubContractPackageVendor.Id, SubContractPackageVendor.isActive,SubContractPackageVendor.isAwarded,SubContractPackageVendor.UserOrContactType,SubContractPackageVendor.UserOrContactIdFROMSubContractPackageVendorLEFT JOIN SubContractPackage ON SubContractPackageVendor.PackageId =SubContractPackage.IdLEFT JOIN Users ON UserOrContactType = ''User'' AND UserOrContactId =Users.UserIdLEFT JOIN UserRoles ON UserOrContactType = ''User'' ANDUserRoles.UserId = Users.UserId AND UserRoles.ProjectId =SubContractPackage.ProjectIdLEFT JOIN Role ON Role.RoleId = UserRoles.RoleIdLEFT JOIN Contact ON UserOrContactType = ''Contact'' ANDUserOrContactId = Contact.IdLEFT JOIN SubContractLineItem ONSubContractLineItem.RefType = ''Package'' ANDSubContractLineItem.RefId = SubContractPackageVendor.PackageIdLEFT JOIN SubContractLineItem as SubContractPackageVendorItem ONSubContractPackageVendorItem.RefType = ''PackageVendor'' ANDSubContractPackageVendorItem.RefId = SubContractPackageVendor.Id ANDSubContractPackageVendorItem.RefSubId = SubContractLineItem.IdWhereSubContractPackageVendor.PackageId = ' + CAST(@PackageId as varchar)+ 'GROUP BYSubContractPackageVendor.Id, SubContractPackageVendor.isActive,SubContractPackageVendor.isAwarded, Users.Company, Contact.Company,SubContractPackageVendor.UserOrContactType,SubContractPackageVendor.UserOrContactId'--print @sqldeclare @sumfunc varchar(100),@pivot varchar(100),@table varchar(100),@FieldPrefix varchar(5),@TotalFieldName varchar(50),@PivotFieldFilter varchar(1000)select@sumfunc ='Sum(isnull(SubContractPackageVendorItem.Total,0) )' ,@pivot ='SubContractLineItem.Category' ,@table ='SubContractLineItem' ,@FieldPrefix='~' ,@TotalFieldName = 'Total' ,@PivotFieldFilter = ' AND RefType=''Package'' AND RefId=' +CAST(@PackageId as varchar)set nocount onDECLARE @sql varchar(8000), @delim varchar(1), @TotalSql varchar(8000)SET NOCOUNT ONSET ANSI_WARNINGS OFFEXEC ('SELECT ' + @pivot + ' AS pivot INTO ##pivot FROM ' + @table + 'WHERE 1=2')EXEC ('INSERT INTO ##pivot SELECT DISTINCT ' + @pivot + ' FROM ' +@table + ' WHERE '+ @pivot + ' Is Not Null ' + @PivotFieldFilter)SELECT @sql='', @sumfunc=stuff(@sumfunc, len(@sumfunc), 1, ' END)' )SELECT @delim=CASE Sign( CharIndex('char',data_type)+CharIndex('date', data_type) )WHEN 0 THEN '' ELSE '''' ENDFROM tempdb.information_schema.columnsWHERE table_name='##pivot' AND column_name='pivot'select * from ##pivotDROP TABLE ##pivot

View 6 Replies View Related

## Global Temp Table? Useful Or Abuseful

Oct 25, 2007



Greetings guru's,

Is there a benefit to using global temp tables? I've read a few articles this morning and there doesn't seem to be a real need for them.

Am I missing something?

Adam

View 4 Replies View Related

SQL 2012 :: Global Temp Table - Invalid Object Name

Feb 13, 2015

I have created a global temp table in Step1 of SQL Job.

I have used that in remaining steps of same job...i ran the job

But i got error message like invalid object name ##xxxxxxxx later i have included as tempdb..##xxxxxxxx also. the i got invalid reference for...

From my SSMS:-

But i was able to do select query for the same from my SSMS...

i have incorporated all steps in single step and completed job...

My question is why ##temp table created in step1 is not able to use in other steps of same job ?

SQL Server 2012 Enterprise Edition

View 2 Replies View Related

Creating A Dynamic Global Temp Table Within A Stored Procedure

Sep 7, 2006

hi,I wish to create a temporary table who's name is dynamic based on theargument.ALTER PROCEDURE [dbo].[generateTicketTable]@PID1 VARCHAR(50),@PID2 VARCHAR(50),@TICKET VARCHAR(20)ASBEGINSET NOCOUNT ON;DECLARE @DATA XMLSET @DATA = (SELECT dbo.getHistoryLocationXMLF (@PID1, @PID2) as data)CREATE TABLE ##@TICKET (DATA XML)INSERT INTO ##@TICKET VALUES(@DATA)ENDis what i have so far - although it just creates a table with a name of##@TICKET - which isn't what i want. I want it to evaluate the name.any ideas?

View 16 Replies View Related

Global Temp Table Vs. Permanent Table Use

Dec 17, 2004

I need to decide what is better to use: global temp table ( I can't use local one) or permanent table in SQL 2000 stored procedures. I extract data from linked server table and update several tables on our server.
Those procedures scheduled to run every 3 hours.

Another question: for some reasons when I used global temp table, I wasn't able to schedule multi steps with every step executing one of the stored procedures.I think global temp tables should be visible to other stored procedures, right?

Your suggestions?

View 1 Replies View Related

Temp Table Vs Global Temp Table

Jun 24, 1999

I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.

thanks!!
Toni Eibner

View 2 Replies View Related

A Curious Error Message, Local Temp Vs. Global Temp Tables?!?!?

Nov 17, 2004

Hi all,

Looking at BOL for temp tables help, I discover that a local temp table (I want to only have life within my stored proc) SHOULD be visible to all (child) stored procs called by the papa stored proc.

However, the following code works just peachy when I use a GLOBAL temp table (i.e., ##MyTempTbl) but fails when I use a local temp table (i.e., #MyTempTable). Through trial and error, and careful weeding efforts, I know that the error I get on the local version is coming from the xp_sendmail call. The error I get is: ODBC error 208 (42S02) Invalid object name '#MyTempTbl'.

Here is the code that works:SET NOCOUNT ON

CREATE TABLE ##MyTempTbl (SeqNo int identity, MyWords varchar(1000))
INSERT ##MyTempTbl values ('Put your long message here.')
INSERT ##MyTempTbl values ('Put your second long message here.')
INSERT ##MyTempTbl values ('put your really, really LONG message (yeah, every guy says his message is the longest...whatever!')
DECLARE @cmd varchar(256)
DECLARE @LargestEventSize int
DECLARE @Width int, @Msg varchar(128)
SELECT @LargestEventSize = Max(Len(MyWords))
FROM ##MyTempTbl

SET @cmd = 'SELECT Cast(MyWords AS varchar(' +
CONVERT(varchar(5), @LargestEventSize) +
')) FROM ##MyTempTbl order by SeqNo'
SET @Width = @LargestEventSize + 1
SET @Msg = 'Here is the junk you asked about' + CHAR(13) + '----------------------------'
EXECUTE Master.dbo.xp_sendmail
'YoMama@WhoKnows.com',
@query = @cmd,
@no_header= 'TRUE',
@width = @Width,
@dbuse = 'MyDB',
@subject='none of your darn business',
@message= @Msg
DROP TABLE ##MyTempTbl

The only thing I change to make it fail is the table name, change it from ##MyTempTbl to #MyTempTbl, and it dashes the email hopes of the stored procedure upon the jagged rocks of electronic despair.

Any insight anyone? Or is BOL just full of...well..."stuff"?

View 2 Replies View Related

How To Export A Temp Table To A Text File?

Apr 24, 2006

Hello everyone:

I create a temperal table to load data in a stored procedure. At last I want to export this temp table to a text file.

Any suggestion will be great appreciated.

ZYT

View 1 Replies View Related

Export Sp_columns Result Into A Temp Table?

Mar 1, 2004

Can anyone show me the syntax for exporting the result of sp_columns into a new table?

I've tried using "SELECT EXEC sp_columns...INTO 'column_info'" but I keep getting syntax errors that are unclear to me.

Any help would be greatly appreciated.

ab

View 3 Replies View Related

Global Temp Tables

Aug 11, 1998

Hi everyone:

I am creating an sp, in which I check for the existence of a global temp table (using the exists)
statement. If the Exists returns a false, I move on to processing without the temp table. If it
returns a true, I utilize the temp table to do some inserts. I create the temp table when my
application first starts up. The problem that I am facing is that the check for the temp table`s
existence seems to be failing. Is there any other way to check for the existence of a global
temp table??

Any info really appreciated
Thanks
Nisha

View 1 Replies View Related

Global Temp Tables

May 29, 2006

Hi group,

I want to create several global temp tables. I've created a script:

if not object_id('tempdb..##tbl_ProductTypes') is null
begin
drop table ##tbl_ProductTypes
end
select * into ##tbl_ProductTypes from dbo.tbl_ProductTypes

This script creates a global temp table. When I run it in QA the table is created. When I close QA the table is dropped. This is correct since I found the following in BoL:
[Global temporary tables are automatically dropped when the session that created
the table ends and all other tasks have stopped referencing them. The
association between a task and a table is maintained only for the life of a
single Transact-SQL statement. This means that a global temporary table is
dropped at the completion of the last Transact-SQL statement that was actively
referencing the table when the creating session ended.]

I created a job that executes the statement above. The job exists with success, however the table is not created!

Why wasn't the table created??

TIA

Regards,

SDerix

View 4 Replies View Related

Global Temp Tables In SQL Server

Oct 5, 2006

Hi!

I have a stored proc that creates a global temp table. How can I have multiple users select records from and insert records in that table without overwriting and/or deleting data?

Thanks so much for your help!

-Parul

View 14 Replies View Related

Temp Tables, Global And Local

Jul 20, 2005

Can anyone tell me or post a link that says how many global temptables can exist SQL Server 2000? Also, is there a limit to thenumber of local temp tables that can exist?Thanks,Billy

View 1 Replies View Related

Transact SQL :: Global Temp Tables

Jun 3, 2015

I have two global temp tables in my stored procedure.Is it possible for me to make the execution of a stored procedure dynamic. Based on a flag parameter value I should get the result set from first temp table  and viceversa ex: If my flag is 0.I should be able to get the result set from ##temp1 (select * from ##temp1).If my flag is 1.I should be able to get the result set from ##temp2 (select * from ##temp2).

View 4 Replies View Related

Dropping Global Temp Tables Programatically

Oct 4, 2006

Hi,

I want to drop a Global temp table within a stored procedure.
But first, I want to check it's existence.

So, what I would like to do is something like this

if exists
(select * from sysobjects where name like '##globaltemptable')
drop table ##globaltemptable

But I don't think the global temp tables get stored in sysobjects.

Any suggestions?

Thanks in advance

View 2 Replies View Related

Nested Stored Proc. And Global Temp Tables

Mar 2, 1999

I have an sql file that contains several queries that are generating numbers to populate a sql table. The sql file is too large for a single sp so I am nesting them. I have 4 nested stored procedures. Each of the queries in each stored procedure dumps into its own global temp table. The final stored procedure needs to insert into a sql table all the information gathered in the global temp tables. So the final stored proc. looks something like:
"Create procedure usp_myProc_4 AS EXEC usp_myProc_3
INSERT INTO mySQLTable (a,b,c)
SELECT a, b, c FROM ##myTempTable (which was created in usp_myProc_1)

INSERT INTO mySQLTable (a,b,c)
SELECT a, b, c FROM ##myOtherTempTable

INSERT INTO......etc;"

I have done this befor and it worked fine. The only difference is that when I did this before these insert statements were being called from within an sp_makewebtask procedure.

Now when I try to save this final stored procedure it tells me "Invalid Object Name: ##myTempTable"

How do I call on these global temp tables from my final nested stored procedure?

Thanks for any help.

View 1 Replies View Related

Remote-server Execution Of A Global Temp Stored Procedure

Oct 9, 2006

I have the following execution of a global temporary stored procedure on a remote SQL 2000 server:


insert into targetTable
exec remoteServer.master.dbo.sp_MSforeachdb ' ', @precommand = 'exec ##up_fetchQuery'

This is an ugly duck query but it seems to work fine. when I try to directly execute the remote stored procedure such as with


insert into query_log exec remoteServer.master.dbo.##up_fetchQuery

I get execution error


Server: Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure '##up_xportQueryLog'.
Database name 'master' ignored, referencing object in tempdb.


When I try


insert into query_log exec remoteServer.tempdb.dbo.##up_fetchQuery

I get


Server: Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure '##up_xportQueryLog'.
Database name 'tempdb' ignored, referencing object in tempdb.
with


insert into query_log exec remoteServer..dbo.##up_fetchQuery

or


insert into query_log exec remoteServer...##up_fetchQuery

I get


Server: Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure '##up_xportQueryLog'.

I guess the remote server has trouble resolving the name of the global temp stored procedure when its reference comes in as a remote stored procedure calls. Is there any way to directly call a global temp stored procedure from a remote server or do I need to stick with this goofy-looking work-around?



Dave

View 3 Replies View Related

Excel Into Temp Table And Validations In SSIS

Aug 11, 2005

i have an excel sheet with about 30 columns of data ...i want to validate all the data in these cells of the excel through SSIS.

View 1 Replies View Related

How To Use DTS To Export To Access Using Global Variables ...

May 6, 2002

Hi,

I am trying to export data from SQL7 to Access using a DTS package. I want to use the global variables within the package in sql statements.

How can I do that?
I have 2 global variables set: @DID & @Rowid

When tranfering data I used the sql statement to get the data from SQL7:
Select * from Tablex where ColumnX=@DID AND ColumnY > @rowid

but when I do that I get an error: You must declare the variable @DID

Why is that, if I declared it in the global variables section????

TIA.

View 4 Replies View Related

Unable To Extend Temp Segment By 64 In Tablespace TEMP (SSIS Error While Copying Data From Oracle)

Oct 22, 2007

I am transferring data from oracle and getting below error message.

I using 4 data flow tasks with in a single control flow and all the 4 tasks quueries same table but populates data in to different sql tables based on the where contidion

[OLE DB Source 1 [853]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "ORA-01652: unable to extend temp segment by 64 in tablespace TEMP ".

View 4 Replies View Related

T-SQL (SS2K8) :: Moving Values From Temp Table To Another Temp Table?

Apr 9, 2014

Below are my temp tables

--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL

[Code] ....

I want to loop through the data from #Base_Resource and do the follwing logic.

1. get the Resourcekey from #Base_Resource and insert into #Resource table

2. Get the SCOPE_IDENTITY(),value and insert into to

#Resource_Trans table's column(StringId,value)

I am able to do this using while loop. Is there any way to avoid the while loop to make this work?

View 2 Replies View Related

Export A Table In SSIS Package Problem

Mar 26, 2007

I tried to write a package for transferring SQL 2005 table to a flat file in
Visual Studio. However I got the unicode error message at the destination
even though I only use English. Does anyone has idea? Thanks.

The message is as following :

Error: Column "Status" cannot convert between unicode and non-unicode
string data types.
Error: ... ( The same message with all the column in the source table)

Please help. Thanks.

View 4 Replies View Related

General SSIS Package To Export Any Table Into CSV

Mar 18, 2013

I need to create an SSIS package that takes a table name as a parameter and exports out its data in a CSV file.The challenge is that if I use a data flow task and a flat file connection manager (for csv export), I have to specify the file/table structure. I will not know the table structure until the run time because it is input specific.I was thinking along the lines of using C# in a script task, but could not come up with a full blown solution.

View 1 Replies View Related

Global Temp Tables Getting Dropped Form Time To Time

Apr 10, 2007

Hi all,

I have created several global temp tables to cache some intermediate results ...
However, it seems that after a while those tables will be dropped by SQL Server 2005 automatically (I have not restarted the server and no drop table statement ever executed against those tables). Is this a feature by design? How to make those global temp tables persistence to next service restart?

Thanks,
Ning

View 5 Replies View Related

Can You Caputure And Export Out Result Sets In Temp Tables???

Jan 8, 2001

I need to export out the data in a result set from temp tables. It is in a rather large Dts Stream. Thanks for your help. Brett

View 1 Replies View Related

SSIS Global Variables

Jul 10, 2007

Before in DTS, I used to using ActiveX scripts to setup simple Global Variables that would later be used by the package, let's say a give state or a date.
I'm completely lost how to do the same in SSIS, can someone give me a hand?
I'm not sure what component to use and how to read this variable.

View 2 Replies View Related

SSIS Script Global Variables

Feb 6, 2008

How do i access global variables in SSIS scripts ?

the Dts.variables("VarName").Value

should work but doesn't ?
do i need to reference the variable another way ?

View 1 Replies View Related

Setting The Global Variable Values In SSIS

May 27, 2008

Hi,
I am trying to create an SSIS package but am not able to set the global variable values.

I want to have a Global Variable as @EventID

and the create a Execute SQL Task which will run this query:

SELECT Max(EventID)
FROM EventTable

and assign this Max value to the global variable @EventID


How can I achieve this...help me please


Regards,

Nusrath

View 1 Replies View Related

SSIS - Global Data SOurce - Password Issues

Oct 20, 2006

I have a simple solution with (right now) 4 packages, 3 configuration files and one "global" datasource.  Here is the View Code on the data source:<DataSource xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dwd="http://schemas.microsoft.com/DataWarehouse/Designer/1.0" xsi:type="RelationalDataSource" dwd:design-time-name="02d8345e-665e-4bd8-9323-1e846af220e5" xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">  <ID>PPDM37 Staging</ID>  <Name>PPDM37 Staging</Name>  <CreatedTimestamp>0001-01-01T07:00:00Z</CreatedTimestamp>  <LastSchemaUpdate>0001-01-01T07:00:00Z</LastSchemaUpdate>  <ConnectionString>Provider=SQLNCLI.1;Data Source=engsql03.dev.ihs.com;Persist Security Info=True;Password=;User ID=;Initial Catalog=PPDM37_Staging</ConnectionString>  <ConnectionStringSecurity>PasswordRemoved</ConnectionStringSecurity>  <Timeout>PT0S</Timeout></DataSource>As you can see, the <ConnectionStringSecurity> node is set with PasswordRemoved.  When editing the data source and checking the Keep Password option on it still saves with PasswordRemoved!  I've even gone in and hand edited the above XML.  The next time I view the XML it is set back to PasswordRemoved.  How the heck do I keep the password with the connection string?  I am pushing the connection string out to a global config file and it does not save the password there either.  Extremely frustrating as it is causing us to hard code the password inside our packages which means it is no longer able to move from one server to the next without touching every single package.Suggestions?  Is there a setting somewhere in SSIS that is doing this?

View 3 Replies View Related

Accessing Global Variables In SSIS Script Components

Feb 6, 2008

How do i access global variables in SSIS scripts ?

the Dts.variables("VarName").Value

should work but doesn't ?
do i need to reference the variable another way ?

View 3 Replies View Related

SSIS Equivalent For Dynamic Properties Global Variable Example

Apr 17, 2007

Hi,



I have a dts package that currently uses a dynamic properties task to set the values of global variables. Each variable is based on the value of a query to the database.

I am in the process of migrating this dts package to SSIS but cannot find an equivalent function. I have looked at property expressions but cannot get this working the same way.



Any help would be appreciated.



Thanks

Lyn

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved