Unable To Open Windows Service Identity Panel In Reporting Services Configuration Manager
Jul 4, 2007
Hi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
I have installed SQL Server 2005 Express Edition with Advanced Services and also Toolkit in my system. Following which I cofigured the Reporting Services Configuration.
When I try http://localhost/Reports it throws the following error. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Bad Data. (Exception from HRESULT: 0x80090005)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------- I have tried to search exhaustively for the solution and nothing seems to be crystal clear in solving the above error.
Under Reporting Services Configuraiton Manager (RSCM) all are ticked excepting: Initialization, SharePoint Integration,Encryption Keys, EMail Settings,Execution Account.
Before this unknowingly I have changed "Windows Service Identity" during configuration which is not the same as Web Service Identity. Under "Web Service Identity" ASP.Net Service Account is listed as <machinename>ASPNET.
Now under "Windows Service Identity" it is selected to "Windows Account" : homequinn. After reading the installation steps it is suggested to have it with "Buil-in Account" ->"Network Services" is recommended. When I try to change it asks me for password and key file. Once I provide it, it is throwing me the following error.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------- ReportServicesConfigUI.WMIProvider.WMIProviderException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo) at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.BackupEncryptionKey(Byte[]& encryptedBytes, String password) ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Can someone tell how should I proceed to get the reporting services working.
I am getting this error when i clicked on configuration manager. "Cannot connect to WMI provider. You do not have permissions or the server is unreachable. Note that you can only manage SQL server 2005 and later servers with configuration manager only."
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
I've got an error when I want to initialize the Report Server by means of RS Configuration Manager.
All points are check in green except "Encryption Keys" that is in "Optionnal configuration" and "Initialization" that is in "Not Configured".
When I click on "Initialization" an error occured :
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)
When I want to browse the report this error occured:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError). Cannot generate SSPI context.
I am attempting to set up SQL 2005 reporting on my local system. When I get to the "Initialization" step I get the following error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: Keyset does not exist (Exception from HRESULT: 0x80090016) at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo) at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.InitializeReportServer(String installationId)
Can anyone provide assistance or suggestions on resolving this error? Many Thanks!!
Hi all, i am tring to install and configure reporting services in Windows 2003 SP2- 64 bit machine as part of installing SCE 2007, and i followed the procedure for confiurng all the options in reportingservices config tool,
all the options show green flag and still could not proceed further as the following error is coming
"The Selected Sql server reportin service instance is not configured , please configure to continue" which halts the further process,
I have installed SQL Server 2005 edition and installed Sql server 2005 SP2 also,
This is the exception i getThe current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Source Error:
Line 3382: [return: System.Xml.Serialization.XmlElementAttribute("SubscriptionID")] Line 3383: public string CreateSubscription(string Report, ExtensionSettings ExtensionSettings, string Description, string EventType, string MatchData, ParameterValue[] Parameters) { Line 3384: object[] results = this.Invoke("CreateSubscription", new object[] { Line 3385: Report, Line 3386: ExtensionSettings,
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
In my machine i am unable to open .sql files. I am trying to open . Sql files it gives error message Windows can't find program.exe. This program is needed for openings files of type"SQL script file"
Any body tell me which file i have to install. Thanks
After having installed my software at customer's I found out that it's impossible to open tables from Enteprise Manager (Query Designer error). I'm not sure it's because of my soft, but my clients are quite annoyed. I have had this situation on my own server , and the only thing I could do was to reinstall the server. Any other ideas? And what is the origin for this error?
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error Event Source: SQL Server Report Service Event Category: None Event ID: 0 Date: 12/13/2007 Time: 8:25:59 AM User: N/A Computer: XXXXXXXXXXX Description: Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime) at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args) at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158. at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index) at System.Security.Util.Parser.ParseContents() at System.Security.Util.Parser..ctor(Tokenizer t) at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type) at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type) at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy() ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158. at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index) at System.Security.Util.Parser.ParseContents() at System.Security.Util.Parser..ctor(Tokenizer t) at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type) at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type) at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy() at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
I was using Windows 7 and had SSRS 2014 installed.Having set up the inbound rule on Windows Firewall (port 80), to allow SSRS through, I was able to browse to the Report Manager URL, by opening up Internet Explorer as 'Administrator'..
However, now that I have upgraded to Windows 10, I am unable to open the URL.In fact there is now way for me to open Edge as administrator and open my Report Manager URL.
I just installed SQL Server 2005 Express Edition and reporting services (followed the video tutorial). Whenever I try to open the Reporting Configuration Tool, it gives me the following error:
SQL Server 2005 Reporting Configuration Tool has encountered a problem and needs to close. We are sorry for the inconvience.
My only options are to Debug or Close.
I'm not sure why I am getting this error. Can anyone help?
We are trying to attach a database in Sql Server 2005 Express on Windows Vista.It will Show the following Error.
"Unable to open the physical file "Test.mdf". Operating system error 5 :". And then we installed the SQL Server 2005 Service pack 2. This error again comes.Could you please give me the steps to resolve the problem.
Need some help... When we tried to run mulitple packages one after the other from a windows service, first one succeeds but later ones are throwing below error : "The script threw an exception: The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there. A deadlock was detected while trying to lock variable "System:ackageName, User::BusinessDate, User::Environment, User:ortfolioName" for read access. A lock could not be acquired after 16 attempts and timed out."
Later, we tried to create separate AppDomains for each package and execute via console application, but ended up with below error (The below expressions were defined in OnError Event) : "The result of the expression "@[User::ReportErrorFrom]" on property "FromLine" cannot be written to the property. The expression was evaluated, but cannot be set on the property. The result of the expression ""Error At :" + @[System:ourceName] + "" + "Error Description : "+ @[System::ErrorDescription] + "" " on property "MessageSource" cannot be written to the property. The expression was evaluated, but cannot be set on the property."
At last, we tried to span a separate process (System.Diagnostics.Process) for each package. this seems working but taking very long time: A package that normally takes 2 min, is taking 60 min.
We also tried creating an SSIS Package that executes mulitple packages. But only first package is getting executed, and second one is throwing below error (Here the variable it is trying to lock is of first package): "Failed to lock variable "UniqueInstrumentsQuery1" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Please help us with some work around for this. Thanking you in advance,
When I open SQL server configuration manager / expand SQL server 2005 network configuration, I have a Protocols for SQLEXPRESS but under SQL server 2005 services branch, I cannot find a reference to my SQLEXPRESS database service. This causes a problem because, I cannot enable or disable SQLExpress.
I've tried to remove the SQLExpress instance by going to Add/Remove Programs but it doesn't work. After I restart the computer, the entry SQLEXPRESS: database service is still there.
I cannot reinstall SQLEXPRESS either because it saids instance name already exist.
When I try 'net start mssql$sqlexpress' it saids "the service name is invalid"
When I try 'sqlcmd -S <my server name here>SQLEXPRESS it saids
HResult 0x274D, Level 16, State 1 TCP Provider: No connection could be made because the target machine actively re fused it.
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establi shing a connection to the server. When connecting to SQL Server 2005, this failu re may be caused by the fact that under the default settings SQL Server does not allow remote connections.. Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
I'm pulling my hair out because according to the error message above, I should use surface area configuration tool to enable remote connections but I can't even see the SQLEXPRESS entry inside the tool!!!
HELP!! I have an asp.net app that uses Membership Provider and it used to work. but somehow it doesn't work because of this strange sqlexpress issue.
When I run the app I get the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
When I open integration services on my SQL server, I can expand the File System folder fine, but when I try to expand the MSDB folder under stored package, I'm getting the following error: My SQL Server is setup to allow remote connections. What else could be causing this error on the server?
TITLE: Microsoft SQL Server Management Studio ------------------------------ Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: Login timeout expired An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. Named Pipes Provider: Could not open a connection to SQL Server [2]. (Microsoft SQL Native Client) ------------------------------ BUTTONS: OK ------------------------------
I would like to reinstall the enterprise manager of sql server 2000,and i have currently sql server 2000 SP4 installed on it.I googled on it, and read that installation of enterprise manager ispossible from the setup disk, however, this is not possible: it rejectsbecause of the service pack.How can I reinstall enterprise manager, without haveing to uninstallsql completely?ThanksPrem
hi, I have problem initialize report server after upgrade to SP2.. It keep saying Could not locate entry i sysdatabases 'myDatabaseName'. while i'm sure my database existing. Here's the log
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.3161.00</Product> <Locale>en-US</Locale> <TimeZone>Malay Peninsula Standard Time</TimeZone> <Path>C:Program Files (x86)Microsoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServerService__07_12_2007_11_38_15.log</Path> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. ReportingServicesService!library!4!12/07/2007-11:38:15:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file. ReportingServicesService!resourceutilities!4!12/07/2007-11:38:15:: i INFO: Reporting Services starting SKU: Enterprise ReportingServicesService!resourceutilities!4!12/07/2007-11:38:15:: i INFO: Evaluation copy: 0 days left ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Catalog SQL Server Edition = Enterprise ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Current DB Version C.0.8.40, Instance Version C.0.8.54. ReportingServicesService!library!8!12/07/2007-11:38:16:: i INFO: Starting upgrade DB version from C.0.8.40 to C.0.8.54. ReportingServicesService!library!8!12/07/2007-11:38:16:: e ERROR: Exception caught while starting service. Error: System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'CCGM_'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion() at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage() at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread() ReportingServicesService!library!8!12/07/2007-11:38:16:: e ERROR: Attempting to start service again...
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Hi,I tried to Develop one Report in SQL Reporting Service. I haveinstalled SQL Reporting Serivice in Windows 2003 machine. SQL ServerDatabase is in another machine, running on Windows 2000. I developedand deployed the report and all went fine.When I tried to see the report through the Report Service Manager WebPage it is comming properly. But When I tried to See the report inanother web page, I'm not able to see the images. But the Data isgetting Displayed and only Image is not comming. When I exported thereport to Excel, the Image is comming over there.I am using Report Viewer control (Which came as Sample Program) inthe ASPX Page to render the report. I'm using SQL Server 2000 with SP3aand SQL Server 2000 reporting Service with SP1.I tried setting the Mime Time for the GIF image and even "*.*" inthe Mime Type settings of IIS 6.0. Even then its not displaying theimage.Can any one help me out in solving the problem?Thanks in Advance.With RegdsKrish
Vista + SQL Server 2005 Reporting Service Configuration Tool: No Red Cross. http://localhost/reportserver get this error: HTTP Error 403.1 - Forbidden You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run. http://localhost/reports get this error: w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetRequestStream() at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful. Thanks in advance!!!
I have installed SQL Reporting Service on one server. Using the config tool, I am trying to setup the Reporting Database on a seperate SQL instance. This SQL instance is running on a Clustered SQL 2005 server.
The creation of the Database is sucessful. However when I give the Windows credentials to connect to this database on the same page, I always fail at the following task : Setting Connection Info for Reporting Server. The error message is :
"System.Runtime.InteropServices.COMException (0x800706B3) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObject.Get() at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetDatabaseConnection(String server, String database, ConfigurationCredentialsType credsType, String userName, String password)"
The Windows Account I am using has Full SQL Rights to the Clustered SQL Server. I have seen other posts on the forums about the 0x800706B3 error, but most of them are related to a problem with RPC.
The Reporting Services account is runing under 'Network Services'. I am not sure if this is causing the problem?
