I am trying to update a record in a table based off of criteria of another record in the table.
So suppose I have 2 records
ID owner type
1 5678 past due
2 5678 late
So, I want to update the type field to "collections" only if the previous record for the same record is "past due". Any ideas?
Hi All,I have a table in SQL Server 2000 that contains several million memberids. Some of these member ids are duplicated in the table, and eachrecord is tagged with a 1 or a 2 in [recsrc] to indicate where theycame from.I want to remove all member ids records from the table that have arecsrc of 1 where the same member id also exists in the table with arecsrc of 2.So, if the member id has a recsrc of 1, and no other record exists inthe table with the same member id and a recsrc of 2, I want it leftuntouched.So, in a theortetical dataset of member id and recsrc:0001, 10002, 20001, 20003, 10004, 2I am looking to only delete the first record, because it has a recsrcof 1 and there is another record in the table with the same member idand a recsrc of 2.I'd very much appreciate it if someone could help me achieve this!Much warmth,Murray
View 3 Replies View RelatedWe are developing a database in SQL and we are trialing some of our typical analysis undertaken on out dataset.
I have a problem with a update function. ID direction Holiday Lat Long Speed obstime - Datestamp LicenseID - varchar(7) status - int (0 or 1) O-Unoccipied, 1-occupied Pickup - Boolean Dropoff - Boolean
I am trying to update the 'Pickup' or 'Dropoff' when the status changes from 0 to 1 or from 1 to 0 if the difference in the datestamp is less than 2 minutes. Pickup is when the status goes from 0 to 1 Drop off is when the status goes from 1 to 0
Sql is not a strong point with me so I'm just going to throw this out there. I have a stored procedure that updates the quantity in my 'CartItems' table. Is there a way to have something else happen within the stored procedure that will update another field based on other parts of the record? There is a 'lineTotal' field that I need to equal the 'pounds * itemSell' fields which are both fields within this record.
CREATE PROCEDURE UpdateCartItem(@cartItemID Int,@newQuantity numeric(9))ASUPDATE CartItems Set quantity = @newQuantityWHERE cartItemID = @cartItemIDGO
I hope you can help me. I posted this in the microsoft sql server newsgroupa few days ago and got no response so I thought I'd try here. If I canprovide any clarification I'll be glad to do so.I'm trying to calculate a column based on the value of the previous record.I'm not very experienced with SQL-Server.I'm using the following table:CREATE TABLE tblPayment([PaymentID] [int] IDENTITY (1, 1) NOT NULL ,[LoanID] [int] NULL ,[PaymentPeriod] [int] NULL ,[PaymentRecDate] [datetime] NULL ,[PaymentAMT] [money] NULL)I have a view based on this table. That view has the following calculatedcolumnsBeginningBalance: For the first record, this is equal to the loan amountfrom the loan table. For each additional record this is equal to the endingbalance from the previous payment record.Interest: BeginningBalance * the monthly interest rate from the loantablePrincipal: PaymentAMT - InterestEndingBalance: BeginningBalance - PrincipalIt might seem I could use a subquery to calculate the Beginning Balance asin:SELECT LoanID, PaymentPeriod, PaymentAMT,(SELECT SUM(PaymentAMT) FROM tblPayment AS tbl1WHERE tbl1.LoanID = tblPayment.LoanID AND tbl1.PaymentPeriod <tblPayment.PaymentPeriod) AS BeginBalanceFROM tblPaymentWHERE (LoanID = @LoanID)But this will not work, because the interest is calculated on the previousmonth's balance. I need to find a way to loop through the recordset. Isthis possible?Thank you,--Derek CooperDatabase9www.database9.com
View 5 Replies View RelatedHi All,
I am trying to create package something like that..
1- New Customer table as OleDB source component
2- Lookup component - checks customer id with Dimension_Customer table
3- And if same customer exist : I have to update couple fields on Dimension_Customer table
4- if it does not exist then I have insert those records to Dimension_Customer table
I am able to move error output from lookup to Dimension_Customer table using oledb destination
but How can I update the existing ones?
I have tried to use oledb command but somehow it didnt work
my sql was like this : update Dimension_Customer set per_X='Y', per_Y= &Opt(it should come from lookup)
I will be appreciated if you can help me...
Hi
I have a table with a user column and other columns. User column id the primary key.
I want to create a copy of the record where the user="user1" and insert that copy in the same table in a new created record. But I want the new record to have a value of "user2" in the user column instead of "user1" since it's a primary key
Thanks.
Is that possible to restrict inserting the record if record already exist in the table.
Scenario: query should be
We are inserting a bulk information of data, it should not insert the row if it already exist in the table. excluding that it should insert the other rows.
Hi,
Let's say I have 1000 registered users in database table and each of them has numeric ranking value.
How can I get the position of each user in comparison to other users ranking value?
This should be incredibly simply but I've been working on it for quite a while and have had no luck:
There's ONE table with many columns but I'm only interested in three columns.
DistrictLEA
SSN
And a third column titled DistrictLEASSN
This is an odd scenario but I need to concatenate DistrictLEA + SSN for each record and update DistrictLEASSN with the result.
Is there a good method to do this with T-SQL/Cursors?
UPDATE DistrictLEASSN
SET DistrictLEASSN= DistrictLEA + SSN
I'd like to loop through each record in the table and perform the operation.
Thanks! -CD
hi,
i use SSB to insert records in my database. can i use SSB to update a record?
I really want to update just one cell without notify the others in record ,but i can not.
example; my table like this.
ID
Increasingnumber
LastModified
1
15
1/1/1900
i want to modify the "increasingnumber" cell only and also not let "LastModify" cell being updated. Can anyone help me solve this problem?
Am in a small fix. my Trigger is updating my entire table records , i don't want that, i want to update a column in the record that is updated by my application using a trigger that tracks updates on that table.
Is there a way i can track the updated record on my table and then update a field in that record through my TRIGGER?
My database is MSSQLServer2005 Enterprise Edition..
Below is my code
CREATE TRIGGER [TR_Employee]
ON [Test_1_1].[dbo].[Employee]
For UPDATE
Not For Replication
AS
BEGIN
Update Employee set Last_Changed = (select getDate())
END
Go
Yemi
Could anybody help me with the following scenario:
Table 1 Table2
ID,Date1 ID, Date2
I would like to link the two tables and receive all records from table2 joined on ID and the record from table1 that has the most recent date.
Example:
Table1 data Table2 Data
ID Date1 ID Date2
31 1/1/2008 31 1/5/2008
34 1/4/3008 31 4/1/2008
31 3/2/2008
The first record in table2 would only link to the first record in table1
The second record in table2 would only link to the third record in table1
Any help would be greatly appreciated.
Thanks
To see where is the problem I am trying to count rows in the database.First I create a table A with 2 columns namely tablename, rowbefore and rowafter and I insert records in it as below.
INSERT INTO A
SELECT TableName = o.name, '', Rows = max(i.rows) FROM sysobjects o
INNER JOIN sysindexes i ON o.id = i.id
WHERE xtype = 'u' AND OBJECTPROPERTY(o.id,N'IsUserTable') = 1
GROUP BY o.name
ORDER BY o.name
Then I update rowbefore with rowafter as below.
UPDATE A SET rowbefore = rowafter
Now I launch my application with update records in the database.Then I am trying to update rowafter with new records as below.
UPDATE A
SET rowafter = (SELECT max(sysindexes.rows) FROM sysobjects
INNER JOIN sysindexes ON sysobjects.id = sysindexes.id
WHERE xtype = 'u' AND OBJECTPROPERTY(sysobjects.id,N'IsUserTable') = 1 AND A.tablename = sysobjects.name)
Does this update really update my column rowafter or not?
HI ALL,
CAN ANYBODY HELP ME TO SOLVE THE ISSUE
I WANNA UPDATE A RECORD OF ONE TABLE WITH VALUES THAT ARE PRESENT IN A COLUMN OF ANOTHER TABLE
OR
CAN I DO THE SAME USING INSERT QUERY
THANKS IN ADVANCE
Is there a way to structure a query to update an existing table record if it already exists, otherwise insert a new record into that table?
View 2 Replies View RelatedI have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
I have table "Clients" who have associated records in table "Mailings"
I want to populate a gridview using a single query that grabs all the info I need so that I may utilize the gridview's built in sorting.
I'm trying to return records containing the next upcoming mailing for each client.
The closest I can get is below:
I'm using GROUP BY because it allows me to return a single record for each client and the MIN part allows me to return the associated record in the mailings table for each client that contains the next upcoming 'send_date'
SELECT MIN(dbo.tbl_clients.client_last_name) AS exp_last_name, MIN(dbo.tbl_mailings.send_date) AS exp_send_date, MIN(dbo.tbl_mailings.user_id) AS exp_user_id, dbo.tbl_clients.client_id, MIN(dbo.tbl_mailings.mailing_id) AS exp_mailing_idFROM dbo.tbl_clients INNER JOIN
dbo.tbl_mailings ON dbo.tbl_clients.client_id = dbo.tbl_mailings.client_idWHERE (dbo.tbl_mailings.user_id = 1000)GROUP BY dbo.tbl_clients.client_id
The user_id set at 1000 part is what makes it rightly pull in all clients for a particular user. Problem is, by using the GROUP BY statement I'm just getting the lowest 'mailing_id' number and NOT the actual entry associated with mailing item I want to return. Same goes for the last_name field. Perhaps I need to have a subquery within my WHERE clause?Or am I barking up the wrong tree entirely..
Have an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
Any new record inserted or update in source table SSIS package automatically run, how can we achieve without using service broker.
View 7 Replies View RelatedHi,
We are currently developing a crm that has the following main tables: client, sales, actions, contacts and employees with up to 4 million records. The db contains several other tables with extra information but these aren't relevant for this problem.
Clients have sales, contacts and actions. sales and actions can have seperate contacts as well, and contacts can be related to employees in a way.
Offcourse a security model was implemented but this only provides the option to hide or show all the records of these main tables. Now people noticed that it is a must to let people see for example only companies they created or do sales with. In other words access must be given at a record level.
The first thing that pops in my head is to create a client_security, sales_security, ... table that contains the employee_id and client_id or sales_id, or ... And add a join with one of these security tables for each select that is executed.
I wonder (because of the huge amount of data) if there isn't a better way to get this done?
Another possible issue that came to mind was, that when some data doesn't need protection or some people have the rigth to see everything, we would have to create the records in the security table anyways, resulting in probably hundreds of thousands of records.
Feedback on our solution (if we can call it that allready), or even keywords to find more about this issue via google (record based security really isn't the best description I guess) are most appreciated.
thx in advance.
I have the following table:
Occ_Num Feature_Num Trans_Date Peril_Desc
123 1 1-2-2012 Water
123 1 1-11-2012 Ice
123 2 1-2-2012 Other
123 2 1-13-2012 Other
123 2 1-19-2012 Wind
I want to select each Occ_Num, Feature_NUM, Trans_Date, and PERIL_Desc but with only the Peril that was part of the max trans_date.
So i would want the following from above:
Occ_Num Feature_Num Trans_Date Peril_Desc
123 1 1-11-2012 Ice
123 2 1-19-2012 Wind
I'm having trouble with the syntax need to accomplish this.
I have a view where the results would be like this.(userid,name,rolekey are my col names with data)
userid name rolekey
test1 tname rolekey1
test1 tname rolekey2
test1 tname rolekey3
is this possible to retireve data from view where i need only userid with rolekey1.? tried with a function but its taking more time? any options in doing it in the view itself?
Hi all - this one has me stumped... PLEASE HELP!!!
I have a back/forward navigation link that passes a URL.startrow number (lets call it n) - based on n - I only want to select the record that is the n'th record based on a sort order (gall_order) - (SQL SERVER).
<cfquery name="gallHomePic1st" datasource="id" maxrows="1">
SELECT id
FROM gall_home
ORDER BY gall_order asc
</cfquery>
For e.g. - I want the 7th (14th - 21st etc) record based on gall_order asc.
Thanks guys - this has me stumped!
I have the following data,
CustomerID EngID EngCount
1 A11 2
2 B12 1
3 C10 3
I need to display it as,
CustomerID EngID EngCount
1 A11 1
1 A11 1
2 B12 1
3 C10 1
3 C10 1
3 C10 1
Create a record based on the EngCount. So CustomerID of 3 has 3 records as shown above.
How to do?
Technology Type Size
XYZ A 200
XYZ1 A 200
XYZ2 A 300
XYZ3 A 300
ABC1 X 238
ABC2 X 238
PQR B 320
MNO C 330
I have written a query on a table whose output will look like the above. I need to know if i should store this in a record set or create a temp table to get the following fuctionality.
Now I need to concatenate the Technology based on Type and size.
As you can see in Type A we have two sizes 200 and 300.
We need to group the Technology of type A with same size together.
So the output of the procedure should be
XYZ + XYZ1
XYZ2+ XYZ3
ABC1 + ABC2 etc.
We need to concatenate the Technology string with the next technology if they have the same type and size.
Can somebody please help or send any sample code.
Any help is greatly appreciated
Thanks
Swapna
I have a client who needs to copy an existing sale. The problem isthe Sale is made up of three tables: Sale, SaleEquipment, SaleParts.Each sale can have multiple pieces of equipment with correspondingparts, or parts without equipment. My problem in copying is when I goto copy the parts, how do I get the NEW sale equipment ids updatedcorrectly on their corresponding parts?I can provide more information if necessary.Thank you!!Maria
View 6 Replies View RelatedHi People,
hope someone can help me out here with a little problem.
Basically i've go a asp.net page which has a listbox on. This list box is populated from a SQL database table with the datetime of the a selected field. Thus in the list box you get a list of strings looking like this "24/09/07 12:58"
Also on the page is a submit button, and some other editing textboxes. The main issue here is the when the submit button is used i get the currently selected listbox timedate string and then pass this along with other items to update a record in the database based on the datetime in the listbox control.
Below is how i get the string from the listbox control
Dim except_time As DateTime
except_time = DropDownList1.SelectedValue
The expect_time is then passed to store procedure along with some other vars, which looks like this
-- =============================================-- Author: Lee Trueman-- Create date: 1st Sept 2007-- =============================================CREATE PROCEDURE [dbo].[spExcept_UpdateData] -- Add the parameters for the stored procedure here @validated bit, @update_time datetime, @except_time datetimeASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON
-- Insert statements for procedure here UPDATE exceptions SET validated = @validated, update_time = @update_time WHERE (except_time = @except_time)END
So validated and update_time should be updated when except_time is equal to @except_time
My problem is that the database never updates. If i debug the asp.net page the watch var shows the datetime in US format (I.e "09/24/07 12:58"), if this is true then this would explain why when it is passed to the stored proc nothing gets updated, as there would not be a date match.
can anyone see any silly mistakes i'm doing here ????
I am trying to write a stored procedure that updates a value in a table based on the sort order. For example, my table has a field "OfferAmount". When this field is updated, I need to resort the records and update the "CurrRank" field with values 1 through whatever. As per my question marks below, I am not sure how to do this.
Update CurrRank = ??? from tblAppKitOffers
where appkitid = 3 AND (OfferStatusCode = 'O' OR OfferStatusCODE = 'D')
ORDER BY tblAppKitOffers.OfferAmount Desc
All help is greatly appreciated.
This my table named myData
CREATE TABLE [dbo].[myData](
[idx] [int] NULL,
[paymentMethod] [nvarchar](200) NULL,
[daerahKutipan] [int] NULL,
[payer] [int] NULL,
[code]....
I want to calculate the number of payer Group By paymentMethod. The number of payer must be divided by daerahKutipan. So far, my query as follow
select paymentMethod,
COUNT(CASE WHEN daerahKutipan = 1 THEN payer ELSE 0 END) figure_Seremban,
COUNT(CASE WHEN daerahKutipan = 3 THEN payer ELSE 0 END) figure_KualaPilah,
COUNT(CASE WHEN daerahKutipan = 4 THEN payer ELSE 0 END) figure_PortDickson,
COUNT(CASE WHEN daerahKutipan = 5 THEN payer ELSE 0 END) figure_Jelebu,
COUNT(CASE WHEN daerahKutipan = 6 THEN payer ELSE 0 END) figure_Tampin,
COUNT(CASE WHEN daerahKutipan = 7 THEN payer ELSE 0 END) figure_Rembau,
[code]....
I have a query which finds duplicate spec_items linked to a work order. What I want to do it remove the duplicates (and in some cases there will be more than one) leaving only the record with the highest [sr.id]
select sr.id, sr.linked_to_worknumber, sr.spec_checklist_id from spec_checklist_remind sr inner join spec_checklist_remind sc on sc.linked_to_worknumber = sr.linked_to_worknumber
group by sr.id,sr.linked_to_worknumber, sr.spec_checklist_id
Having sr.spec_checklist_id = 30 and count(*)>1
order by sr.linked_to_worknumber
Sample of query results:
idlinked_to_worknumberspec_checklist_id
18323IP-DN-03377430
24229IP-DN-03377430
18294IP-DN-03380830
28027IP-DN-03380830
18295IP-DN-03381030
19924IP-DN-03381030
In the 3 cases, I would want to retain only records with ids 24229,28027 and 19924.
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Select h.worknumber, h.itemcode, h.descr, h.task_descr, h.qty, h.itemised,
h.serialnum, h.manufacturer, h.model_id, h.depot, h.date_in, h.date_approved,
h.est_complete_date, h.actual_complete_date, h.meterstart, h.meterstop,
h.custnum, h.name cust_name, h.addr1, h.addr2, h.town, h.county, h.postcode,
h.country_id, h.contact, h.sitename, h.siteaddr1, h.siteaddr2, h.sitetown,
[Code] ....
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours],
wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.