Hi All,
I have a Problem while updating one table data from another table's data using sql server 2000.
I have 2 tables named TableA(PID,SID,MinForms) , TableB(PID,SID,MinForms)
I need to update TableA with TableB's data using a single query that i have including in a stored procedure.
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Any suggestions?
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master
UPDATE [dbname].dbo.table
SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1
WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2
AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3
AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
What is wrong?
We have two tables with names X and Y.
X has a,b columns. And Y has c,d columns.
I want to update b column in X table with the values from d column in Y table on condition X.a=Y.c.
I'm not sure if this could be done, but if anyone has any insight on how to do this please let me know...
Currently, I have a table that has a field of Categories. I recently created a Category table in which each category has it's own ID. I need to replace the Data that was in my original table with the new ID's based on the actual category name... Is there any way of doing this without manaul data entry?
I'm not sure if this could be done, but if anyone has any insight on how to do this please let me know...
Currently, I have a table that has a field of Categories. I recently created a Category table in which each category has it's own ID. I need to replace the Data that was in my original table with the new ID's based on the actual category name... Is there any way of doing this without manaul data entry?
I am relatively new to SQL and am having trouble with an update. I know I cannot use a join update and have to use subquery. I am not sure of the syntax on how to do this. Below is basically what I want to do, but cannot figure out how to do it with a subquery. Any help would be appreciated.
update revisedapps
set alternateapp = t.alternateapp
from tempalternateapps t
join revisedapps r on t.appname = r.softwarename
I'm an sql/SSMSE novice, but have successfully connected to my sql database on a webserver.
My question is: Can I update the table data "directly" using SSMSE's interface, or do i have to run an sql update statement? (By updating table data directly, i mean: can i view the contents of a table, and simply edit the data in a field, like with in an MS Access table?) If I can update the data "directly," how does one do that?
Thanks a lot!
Murray
Hi,
Can anybody give me some information on Table data types of SQL2K.
How and where can it be used. Does it make the queries faster, in case there are many users using ?
Please could anybody give me these details, to make me decide whether I can use it or not ?
Thanx and Regards,
Sushma
Does any one have any examples of how to declare and use these properly?
MSDN doesn't seem to give any example for a beginner.
Hi,Can anybody tell me if it is possible to return a table data type (asopposed to a temporary table) from a stored procedure.I am currently studying for 70-229 using the Thomas Moore book but itdoesn't really make it clear, as the text suggests you can't returnthem but some of his sample questions suggest you can.I can't make it work in Query Analyser so I am assuming that you can'treturn them. Is that correct?Thanks in advance for any help,Simon.
View 1 Replies View RelatedCan you create an UPDATE TRIGGER and use some typeof code to figure out which SP just updated the current table?If not how can i achieve what i want?I tried to run SQL Profiler and i don't understand why i can'tsimply have the Profiler filter events only for the specific database idand the table's object id i chose?What am i doing wrong with SQL Profiler? I was testing thisthrough SQL EM. I had the filters chosen for a specific database idand a specific table's object id, yet when i open another table SQLProfiler captures that information too.Thank you
View 2 Replies View RelatedI need to update one row in a SQL Server 6.5 DB from a row in SQL 2000 server DB. What would be the best way to do this?
I have my 2000 server defined as a Remote Server in 6.5, however I get the error message:
contains more than the maximum number of prefixes. The maximum is 2.
Hi,
I could use some help on how to save the result of my data-flow in an existing table.
I have created a data flow. I have no trouble storing the result of the flow in a new table. But I'm trying to store the result of my data flow in an existing table. (The flow involves fuzzy grouping, and i would like to store the result in the original table on which the fuzzy grouping was performed). But I cannot get it to work.
I can select the existing table as OLE DB destination. I can write an SQL to manipulate this table, but how do i address the result of the flow in the SQL?
Help is welcome here!
I have a dataset that was created via a source + lookups + derived columns.
I wish to take this dataset and treat is as a table within a sql statement so that I can update a permanent table with the a specific value within the temp dataset.
In sql this is what I am trying to do:
SELECT COUNT(*) AS Count_of_Employees, DEPT
FROM Employees
GROUP BY DEPT
UPDATE Departments
SET Number_of_Employees = Count_of_Employees
WHERE Dept = dept.
An SSIS package to transfer data from a DB instance on SQL Server 2005 to SQL Server 2000 is extremely slow. The package uses an OLEDB Source to OLEDB Destination for data transfer which is basically one table from sql server 2005 to sql server 2000. The job takes 5 minutes to transfer about 400 rows at night when there is very little activity on the server. During the day the job almost always times out.
On SQL Server 200 instances the job ran in minutes in the old 2000 package.
Is there an alternative to this. Tranfer Objects task does not work as there is apparently a defect according to Microsoft. Please let me know if there is any other option other than using a Execute 2000 package task or using an ActiveX Script to read records from one source and to insert them into the destination source, which I am not certain how long it might take and how viable will that be?
Any inputs will be much appreciated.
Thanks,
MShah
I have a table with a datetime field 'TheDate'. Currently dates are stored as 'mm-dd-yyyy 00:00:00'. Is there a way to get just the month, day and year parts, '01/01/2008' into the field without changing the field data type to varchar? I'm asking because when I do this:
declare @MyDate as datetime
set @MyDate = '04/02/2008 18:00:00'
select substring(convert(varchar,@MyDate,101),1,10)
I get '04/02/2008', but when I do this:
update TheTable
set TheDate = substring(convert(varchar,TheDate,101),1,10)
I'm still getting a date in the format 'mm-dd-yyyy 00:00:00' stored in the table. I'd like to be able to lose the time portion, but I'd like to be able to keep the datetime datatype for date math purposes. Can it be done?
I'm trying to move my current use of an sql 2000 db to sql 2005.
I need to update a table definition (to change a field to an Identity)
I'm getting a dialog box (in SQL server management studio) on save saying :
'xxxx' table
- Saving Definition Changes to tables with large amounts of data could
take a considerable amount of time. While changes are being
saved, table data will not be accessible.
I press 'Yes' to the dialog box.
After 35 seconds, I get another dialog box saying:
'xxxx' table
- Unable to modify table.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Well, the server is responding and I can query that talbe and other, I
can add/delete rows to other columns. I can modify other
(smaller) tables.
Any ideas where I can change this timeout?
Daniel
Hello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
Hi,
Here is my problem.
There are 2 different SQL Servers, SQLSvr1 and SQLSvr2(both of them are SQL Server 7.0). On SQLSvr1, I have 3 tables and 1 stored procedure and on SQLSvr2, I have 1 table.
Now, I want to know is it possible for me to update table on SQLSvr2 using a stored procedure on SQLSvr1. Assuming I have all rights and permissions on both servers.
Thanks in advance
-Dinesh
If the id1 will change in table1 it should also change the corresponding id1 field in table2 it does not do anything.
CREATE TRIGGER [dbo].[IDCHANGE]
ON [dbo].[table1]
AFTER UPDATE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
Hello all,
I am relatively new to this platform and am trying to update a table of user information and passwords through a series of SQL commands. We import a new file of users every two hours and I would like to have three SQL statements:
- One to add new users not currently in Users table
- One to delete users no longer in our source file
- One to update every field (but one or two) for already existing users.
Any help on creating the SQL (as well as where to store it and how to automate it) is greatly appreciated!
Thanks!
Hi
Im trying to create an update statement which references two tables (join) and has a CASE clause attached. Not sure where im going wrong...
Using T-sql!!!
update import set import.gone =
from import
inner join stat
ON stat.id = import.id
CASE
WHEN stat.A = import.field2 THEN import.gone = sec.A
WHEN stat.B = import.field2 THEN import.gone = sec.B
WHEN stat.C = import.field2 THEN import.gone = sec.C
WHEN stat.D = import.field2 THEN import.gone = sec.D
WHEN stat.E = import.field2 THEN import.gone = sec.E
WHEN stat.F = import.field2 THEN import.gone = sec.F
ELSE import.gone = null
END
Any help would be greatly appreciated
I have a web interface where i have listing of several data and check box for inserting data into SQL server 2005 database table,
so I am able to inset data to sql tables using stored procedure. Now the question is i want to update these inserted records(agency approval column inserted as 1) in same table and assign value 1 fot the checked data to column finace approval as 1.
Here is how ia have webclas library where i script for getting the insert parameterspublic void Process_Payment(ref DataTable TableWithPayments, string Payment)
{SqlCommand InsertCommand = new SqlCommand();
SqlConnection AccessDatabase = new SqlConnection(FinanceSourceWrite.ConnectionString);int PaymentID = 0;
AccessDatabase.Open();
InsertCommand.Connection = AccessDatabase;
//DataTable TemporaryTable = new DataTable();
//TemporaryTable = TableWithPayments;SqlTransaction TransactionProcess = null;
SqlParameter InsertParameters;foreach (DataRow DataCommentInfo in TableWithPayments.Rows)
{InsertCommand.CommandText = "InsertPaymentList"; //THIS IS my stored procedureInsertCommand.CommandType = CommandType.StoredProcedure;
TransactionProcess = AccessDatabase.BeginTransaction();
// SET ALL THE VALUES FOR THE PARAMETERSInsertParameters = InsertCommand.Parameters.Add("@JC_ID", SqlDbType.Int);
InsertParameters.Direction = ParameterDirection.Input;InsertParameters.Value = DataCommentInfo["JC_ID"];
InsertParameters = InsertCommand.Parameters.Add("@Payment_Type", SqlDbType.Int);
InsertParameters.Direction = ParameterDirection.Input;InsertParameters.Value = DataCommentInfo["Payment_Type_ID"];
InsertParameters = InsertCommand.Parameters.Add("@Agency_approval", SqlDbType.Int);InsertParameters.Direction = ParameterDirection.Input;
InsertParameters.Value = DataCommentInfo["Agency_approval"];
Now my stored procedure
ALTER PROCEDURE [dbo].[InsertPaymentList](
@JC_ID int ,
@Payment_Type int,
@Payment_Group int,
@AGENCY_ID int,
@Agency_approval int,
@Agency_approval_date datetime,
@Program_ID nvarchar(50),
@Status bit,
@Jobsite_code_ID int,
@Date_Stamp datetime,
@Provider nvarchar(50),
@UserName nvarchar(256),
@Activity_ID int,
@Subproject_ID int,
@Payment_Support_Retention_List_ID int,
@WPR_ID int,
@Placement_ID int,
@Enrollment_ID int,
@Satisfaction_ID int,
@Enrollment_Bonus_ID int,
@Re_Placement_Bonus_ID int
)AS
INSERT INTO Payment_LIST_AIMS
(JC_ID, Payment_Type, Payment_Group, AGENCY_ID, Agency_approval,
Agency_approval_date, Program_ID, status,
Jobsite_code_ID, Provider, UserName, Placement_ACTV_ID, Placement_Sub_ID, Support_Retention_ID, WPR_ID, Placement_ID,Enrollment_ID,Satisfaction_ID,Enrollment_Bonus_ID,Re_Placement_Bonus_ID)
VALUES @JC_ID, @Payment_Type, @Payment_Group, @AGENCY_ID, @Agency_approval,@Agency_approval_date, @Program_ID, @Status,
@Jobsite_code_ID, @Provider, @UserName, @Activity_ID,
@Subproject_ID, @Payment_Support_Retention_List_ID, @WPR_ID, @Placement_ID,@Enrollment_ID,@Satisfaction_ID,@Enrollment_Bonus_ID,@Re_Placement_Bonus_ID)
SELECT CAST(scope_identity() as int)
Here like you see agency approval column in SQL server table gets value assigned as 1 when Agency user clicks the confirm payment button and so all the values as above....
Now another user Finance user process the same records from the web UI and clicks the process payment button at this stage ..i need to update Finance approval column as 1 agains that particular record existing th the SQL table, there are two three coulmc to be updated , Finance approval(this is where i need help) , Finance approval date , and user
Being a newbie please help me whith how i can fix this
Thanks
Santosh
During web-site development, I am using VStudio 2005 with SQL-Express. I frequently publish changes to my web server that is running SQL- Server 2000 standard edition.
Is there a simple way to replicate changes in database tables design without copying the whole mdf-file and loosing the existing data in the target database?
thanks, Reinhard
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedI have an sql server table which serves as a criteria table for my sql server query.
i wish to update the sql server table from the excel worksheet. The intention is to allow the end user to change the values in a specific column in the sql server table via excel.
The table in question has the following fields
SELECT
[Cluster]
,[Max_Break_btw]
,[RefD_Max_Break]
,[DischD_Max_Break]
,[MaxReviewPeriods]
FROM [databseName].[dbo].[SpellClusterAssum]
I will like to change / update the values in the "[Max_Break_btw]" column.
I have nine type of buttons,
EnrollAmtBTM
PlacAmtBTM and so on, I also have a SQL setver view V_Payment_Amount_List from here i need to display the data on the button
this is the select value to display when i choose the agency list and the amount corresponding to that agency_ID is displayed here the agency_ID is fetched from the SQL CONDITION
THIS IS WHERE I GET FETCH AGENCY DATA WHEN SELECTED i.e SQL CONDITIONprotected void CollectAgencyInformation()
{
WebLibraryClass ConnectionFinanceDB;ConnectionFinanceDB = new WebLibraryClass();
string SQLCONDITION = "";string RUN_SQLCONDITION = "";
SessionValues ValueSelected = null;int CollectionCount = 0;if (Session[Session_UserSPersonalData] == null)
{ValueSelected = new SessionValues();
Session.Add(Session_UserSPersonalData, ValueSelected);
}
else
{
ValueSelected = (SessionValues)(Session[Session_UserSPersonalData]);
}ProcPaymBTM.Visible = false;PaymenLstBTN.Visible = false;
Dataviewlisting.ActiveViewIndex = 0;TreeNode SelectedNode = new TreeNode();
SelectedNode = AgencyTree.SelectedNode;
SelectedAgency = SelectedNode.Value.ToString();
Agencytxt.Text = SelectedAgency;
Agencytxt2.Text = SelectedAgency;
Agencytxt3.Text = SelectedAgency;DbDataReader CollectingDataSelected = null;
try
{CollectingDataSelected = ConnectionFinanceDB.CollectedFinaceData("SELECT DISTINCT AGENCY_ID FROM dbo.AIMS_AGENCY where Program = '" + SelectedAgency + "'");
}
catch
{
}DataTable TableSet = new DataTable();
TableSet.Load(CollectingDataSelected, LoadOption.OverwriteChanges);int IndexingValues = 0;foreach (DataRow DataCollectedRow in TableSet.Rows)
{if (IndexingValues == 0)
{SQLCONDITION = "where (Project_ID = '" + DataCollectedRow["AGENCY_ID"].ToString().Trim() + "'";
}
else
{SQLCONDITION = SQLCONDITION + " OR Project_ID = '" + DataCollectedRow["AGENCY_ID"].ToString().Trim() + "'";
}
IndexingValues += 1;
}SQLCONDITION = SQLCONDITION + ")";
ConnectionFinanceDB.DisconnectToDatabase();if (Dataviewlisting.ActiveViewIndex == 0)
{
Dataviewlisting.ActiveViewIndex += 1;
}
else
{
Dataviewlisting.ActiveViewIndex = 0;
}
SelectedAgency = SQLCONDITION;
ValueSelected.CONDITION = SelectedAgency;
???? this is where i use to get count where in other buttons and are displayed.... but i changed the query to display only the Payment_Amount_Budgeted respective to the agency selected. from the viewRUN_SQLCONDITION = "SELECT Payment_Amount_Budgeted FROM dbo.V_Payment_Amount_List " + SQLCONDITION;
try
{
CollectionCount = ConnectionFinanceDB.CollectedFinaceDataCount(RUN_SQLCONDITION);
EnrollAmtBTM.Text = CollectionCount.ToString();
}
catch
{
}////this is my CollectedFinaceDataCount-- where fuction counts the records in the above select statement if i use for eg.
"SELECT Count(Placement_Retention_ID) FROM dbo.V_Retention_6_Month_Finance_Payment_List"
here is the functionpublic int CollectedFinaceDataCount(String SQLStatement)
{int DataCollection;
DataCollection = 0;
try
{
SQLCommandExe = FinanceConnection.CreateCommand();
SQLCommandExe.CommandType = CommandType.Text;
SQLCommandExe.CommandText = SQLStatement;
ConnectToDatabase();DataCollection = (int) SQLCommandExe.ExecuteScalar();
DisconnectToDatabase();
}catch (Exception ex)
{Console.WriteLine("Exception Occurred :{0},{1}",
ex.Message, ex.StackTrace.ToString());
}
return DataCollection;
}
So here mu requirement request is to display only the value fronm the view i have against the agency selected
Please help ASAP
Thanks
Santosh
What is the best way to transfer data from the staging table into the main table.
Example:
Staging Table Name: TableA_satge (# of rows - millions)
Main Table Name: TableA_main (# of rows - billions)
Note: Staging table may have some data same as the main table.
Currently I am doing:
- Load data into staging table (TableA_stage)
- Remove any duplication of rows from the staging table (TableA_stage)
- Disable all indexes on main table (TableA_main)
- Insert into main table (TableA_main) from staging table (TableA_stage)
- Remove any duplication of rows from the main table using CTE (TableA_main)
- Rebuild indexes on main_table (TableA_main)
The problem with the above method is that, it takes a lot of time and log file size grows very big.
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
View 2 Replies View RelatedI’m a complete newbie so forgive this question. If i have 2 tables Table 1 has the columns for NNAME, PHNUM, SSN, DOB, JOB, UPDATED however the Job description is emptyTable2 has the columns for SSN and JOB
The question is, how I write an update statement that looks at the SSN in table2 matches it to SSN in table 1 and fills in the job description for that person in table1 and adds yes to the UPDATED field.
I have somewhere in the neighborhood of 25,000 records to update.any help would be greatly appreciated.Thank YouAdam
If I have a table with three fields (A, B, C) and 'A' is a primary key, 'B' and 'C' do not have any content and another table with the same number of fields contains the same fields(A, B, C) and the fields do contain data.
I want to populate the first table with the data from the second table where the primary key 'A' is equal.
How would the sql work?
We have two tables with names X and Y.
X has a,b columns. And Y has c,d columns.
I want to update b column in X table with the values from d column in Y table on condition X.a=Y.c.