Use Of User Data Types For Creating Local Temporally Tables In Store Procedures
Aug 24, 2006
I am able to use user data types for creating local temporally tables in store procedures, but I receive an error at run-time about the user data type.
Msg 2715, Level 16, State 7, Procedure SP_SAMPLE_TEST, Line 4
Column, parameter, or variable #1: Cannot find data type D_ORDER_NUMBER.
The same user data type is used as parameters in several other store procedures, and they work perfect. It is also used in several table definitions.
What am I doing wrong?
Thanks in advance to any one who can help me with this problem.
I have defined a user defined data type. When I try to create a stored procedure specifying the column and user define data tpye I receive message
Server: Msg 2715, Level 16, State 3, Procedure spStoredproc, Line 0 Column or parameter #1: Cannot find data type udtcol1. Server: Msg 2715, Level 16, State 1, Procedure spStoredproc, Line 0 Column or parameter #2: Cannot find data type udtcol2. Server: Msg 2715, Level 16, State 1, Procedure spStoredproc, Line 0 Column or parameter #3: Cannot find data type udtcol3
Can you have user defined data types in stored procedures.
Store Procedure creation text
CREATE PROCEDURE spStoredproc @col1 udtcol1, @col2 udtcol2, @col3 udtcol3 AS INSERT INTO tblTempEmployee (col1 , col2 , Col3) VALUES (@col1 , @col2, @col3) GO SET QUOTED_IDENTIFIER OFF SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER OFF SET ANSI_NULLS OFF GO
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database) Help pleaseee
I have a requirement of creating nested tables in SQL server. how to create them. Just to give a background I am trying to move the RDBMS from oracle to SQL server.
Structure of tables is as follows. I have table 'Employees' with address as one of the column. I have one more table with columns Street, Town, Dist, State. When I query the table 'Employees' I should see the attribute name and values of all the columns in address table in address column.
Employees: with columns: ID, FirstName, LastName, dept, gender, dob, address
Address (Nested table): with columns : Street, Town, Dist, State
This was done in oracle using Nested tables and user defined data types. what is alternative for this in SQL server. How can I achive this requirement in SQL server.
Could someone help me with writing the code to export the contents of a varbinary field in my database to make the contents be written to the local harddrive? I can do this in Visual Foxpro but my company wants it in C# and I have no clue about C#.
Hello All,I am stuck on a task that I need to complete. What I have is a SQL 2005DB running with a Table called Docs. The table structure consists ofthe following:Table Structure for Docs------------------------------------DocID int - Primary KeyClientID int - CustomerIDCreatedByUser nvarchar - UserNameCreatedDate datetime - Date of Document stored in SQL DBContent image - Bytes of actually documentContentType nvarchar - (application/msword)ContentTypeImage nvarchar - Path to Image of Document Type(such asword.gif")ContentSize int - Size of DocumentFriendlyName nvarchar - Name of DocumentWhat I want to do is create a query to export all documents from theSQL DB to a local folder on the server or even my local pc. Can this bedone?Thanks
Hi all hope some one can help - please bear with me new to this Basically I have had to change pc's so I copied and pasted my ASPNET.MDF and LDF from my old pc to new PC including webpages/apps etc.. created. However now all I get is "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path """" Just don't understand what permissions the db should have, does it need to match the SQL Express owner...
I installed my asp.net 2.0 web application and sql express june editon on my windows 2003 server.When the application tries to reach the database i am getting the following error"Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed."I can understand that it has something to do with user right but more than that I am pretty lost. Can anyone translate this error for me and give me some tips on what do to.I checked first the user running the sql express service and saw it was the NETWORK SERVICE user. I changed it to be the local system account but that did not make any difference. The application is running just fine on my local computer(Win XP sp2). This one has SQL express April edition though.
Hi, I'm new in MS SQL Server; comming from Firebird and PostgreSQL. I'm trying to import the SQL Script of a database I have in PostgreSQL 8; one basic SQL functionality is the "domain", as the way to create a user datatype; in my database I have one basic domain: OID:
CREATE DOMAIN dom_oid AS numeric(18,0) DEFAULT nextval('oid_secuence');
Is there a similar way to create this kind of types in SQL Server?
Is there a way to change the physical mapping of a user defined data type to the physical SQL Server datatype. It seems that once you create them, it is just about impossible to change it.
Hi all,I defined unsigned_int in my database, which uses unsigned_int_rangerule. The unsigned_int_range rule is defined as follows:@unsigned_int >=0 and @unsigned_int <=4294967295(4294967295 = 0xFFFFFFFF)The storage size is 4 bytes.One of the tables in the database contains a field that is of typeunsigned_int.When I try to add a new record into the table (ex: using the EnterpriseManager), it always fails in the unsigned_int field if I enter a valuegreater than 2147483647 (which is 0x7FFFFFFF) all the way to 4294967295(0xFFFFFFFF). The Enterprise Manager shows the following message:"The value you entered is not consistent with the data type orlength of the column, or over grid buffer limit."What is wrong here? The 4-byte storage should be good for any valuefrom 0 to 4294967295.Any help is appreciated.Thanks,Ken
I am trying to create a clustered index on a View of a table that has an xml datatype. This indexing ran for two days and still did not complete. I tried to leave it running while continuing to use the database, but the SELECT statements where executing too slowly and the DML statements where Timing out. I there a way to control the server/cpu resources used by an indexing process. How can I determine the completion percentage or the indexing process. How can I make indexing the view with the xml data type take less time?
Does anybody know an easy way to change User Defined Data Types ownership to “dbo”, without dropping dependent objects?
I know that there is a st. proc sp_changeobject owner, but it does not deal with this particular db objects. Is there a similar st.procedure or script that would do the same operation?
We have a database that originally had all objects owned by a vendor id. We are in the process of changing the ownership to 'dbo' and wish to remove the vendor id but have found there are a few user defined datatypes that are also owned by this vendor id. How can I change the ownership of them to 'dbo'? They are currently being used in some of the tables. I tried the sp_changeobjectowner but that doesn't work for these.
I have a table RequestUtility with 3 columns Vendor, name, system. I want to call this table from BizTalk so that I send multiple vendors and will get corresponding Vendor, name and system for that. As I need to send multiple vendors at the same time I have created a User-Defined Table type VendorNames with a single column Names. and have written a SP :
ALTER PROCEDURE [dbo].[GetName]  -- Add the parameters for the stored procedure here  @vendorN VendorNames ReadOnly AS  -- SET NOCOUNT ON added to prevent extra result sets from  -- interfering with SELECT statements.  SET NOCOUNT ON;    -- Select statements for procedure here  SELECT * from dbo.RequestUtility where Vendor IN (SELECT Names from @vendorN)
This is working fine when the value for vendor is present in the table. But if the value is not present it is not returning any thing. But, my requirement is that for example vendor is Dummy which is not present in the table so it should return
I am trying to join two tables together, on the same field except they have different data types, see the properties below
Code: TableCOLUMN_NAMEDATA_TYPECHARACTER MAXIMUM LENGTHCHARACTER OCTET LENGTHCHARACTER SET NAMECOLLATION NAME 1itemClassnvarchar 512 1024 UNICODE Latin1_General_CI_AI 2PGCode varchar 3 3 iso_1 Latin1_General_CI_AS in the code for the join,
Code: left join common.dbo.qryPRDGroupDets on CAST(qryData_GB1_ByColumn.itemclass as varchar(3)) = Cast(common.dbo.qryPRDGroupDets.PGCode as varchar(3))
I have tried using the CAST function on one side of the join then on both, to no avail...
I am trying to create a sample table in the Azure SQL  Data warehouse but its giving me a syntax error Incorrect syntax near the keyword 'CLUSTERED'.
CREATE TABLE [dbo].[FactInternetSales] ( [ProductKey] int NOT NULL , [OrderDateKey] int NOT NULL , [CustomerKey] int NOT NULL , [PromotionKey] int NOT NULL
I have Two Database that exist on Two seperate servers. The two database contain same schema and contains tables and columns of same name. Some tables have slight differences in terms of data types or Data type lenght.
For example if a Table on ServerA has a column named - CustomerSale with Varchar (100, Null) and a table on ServerB has a column named CustomerSale with Varchar (60, Null), how can i find if other columns have similar differences in all tables with the same name and columns in the two servers.
I am using SQL Server 2005. And the Two Servers are Linked Servers
What Script can i use to accomplish this task. Thanks
I have a indexing problem. I have a sequence that needs to has a index number. I want to use a table data type and have a working sample BUT I cannot reseed the table when needed. How do I do this.
This works only for the first ExitCoilID then I need to RESEED.
I´m exporting an ms-excel file, then I use a lookup transformation to get a field from a SQL Server 2005 table. The Lookup transformation editor, after selecting the table, shows a warning that says:
at least one mapping between a column from available input columns ans a column from available lookup columns must be defined on the columns page.
So I try to make a relationship in the Lookup transformation editor's column tab where I find the Available input columns and the available lookup columns but I get the following error:
The following columns cannot be mapped: [Department, DEP_CLEGALCODE] One or more columns do not have supported data types, or their data types do not match.
The field in SLQ Server is varchar(10) and the input field is a derived column transformation; I have tried different Data Types but I always have the same error.
The DataFlow is: ExcelSource --> Derived Column --> Lookup --> Flat file destination
How can I create a Table whose one field will be 'tableid INT IDENTITY(1,1)' and other fields will be the fields from the table "ashu". can this be possible in SQL Server without explicitly writing the"ashu" table's fields name.
i want to copy some tables from 1 database to another with its data & procedures etc to another database in Microsoft SQL 2005. can any one help plz reply tnx alot
I have created a table with the following columns...Date(datetime),Actual (Int),Planned (Int)I need to insert weekending dates starting from 23/04/04 loopingthru'for the next 52weeks automatically into the date column.Then in the actual and planned colums, I need to insert a count ofsome records in the table.I will appreciate help on a SQL query to achieve this!
Sorry if I haven't choose appropriate forum for this question.
I have MSSQL05 beta. I know how to list all stored procedures in selected database (everything is in localhost). I need to list parameter names and types for selected stored procedure(s). How can I do that or anything that can return parameter names and types?
