i seem to get a 1 if the values are inserted successfully and -1 if not. but is that right? any other values that can be returned? I can't find it in MSDN2 Library. like i can with other classes, properties & methods
View 1 Replieshii,,i am using asp.net 2005 and sql server 2005...
i m using sql data source in my form,,i want to insert the details into a table using the insert command thr sqldatasource....one of the column name is service_w/lb, this is where i get an error.i am not able to insert the new data..here is my code::::
______________________________________
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:sm123_trackerConnectionString %>"SelectCommand="SELECT * FROM [Agency_Master]"
InsertCommand="INSERT INTO [Agency_Master] ([Agency_Id], [Agency_Main_Contact], [Agency_Invoice_Contact], [Address], [Email_Address], [Phone], [Mobile], [Fax], [TimeZone_Id], [Agency_Name], [Service_w/LB], [Notes], [Technology_Used], [Status with LB]) VALUES (@Agency_Id, @Agency_Main_Contact, @Agency_Invoice_Contact, @Address, @Email_Address, @Phone, @Mobile, @Fax, @TimeZone_Id, @Agency_Name, @Service_w/LB, @Notes, @Technology_Used, @Status_with_LB)"
OldValuesParameterFormatString="original_{0}"
>
_____________________________________
even if i put it as @[service_w/Lb] i get an error....here is the error i get
__________________________________________
Incorrect syntax near 'nvarchar'.The name "Service_w" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.____________________
pls reply as soon as possible ,,,thnks in advance
Hi,
I am trying to set the InsertCommand of a SqlDataSource prior to a new record being created in DetailsView. It has to be changed because certain fields are not being used in one scenerio and it is causing Null's to be written to the database.
Here is what I have tried:
I set the Insert command on page Load:
protected void Page_Load(object sender, EventArgs e)
{
SqlDataSource3.InsertCommand = "Insert into table (name,realName,type,extraValue) VALUES (@name,@realName,@type,@extraValue)";
}
But I don't want to insert the "extraValue if a certain condition is true so I want to change the insert command to SqlDataSource3.InsertCommand = "Insert into table (name,realName,type) VALUES (@name,@realName,@type)
I tried to do that in the following:
protected void DetailsView1_ItemInserted(Object sender, System.Web.UI.WebControls.DetailsViewInsertedEventArgs e)
{
SqlDataSource3.InsertCommand = "Insert into table (name,realName,type,extraValue) VALUES (@name,@realName,@type,@extraValue)";
if (e.Exception != null)
{
ErrorMessageLabel.Text = "An error occured while entering this record. Please verify you have entered data in the correct format.";
e.ExceptionHandled = true;
Response.Write(e.Exception);
}
GridView1.DataBind();
GridView1.DataBind();
}
But it doesn't seem to change,
Any Help would be appreciated,
Doug
I can select the tables and fields, but when I click on Advanced the Check Box to Create the Commands is not available. they are dimmed out.
Why is this happening, is it a setting that I have missed. Any help is appreciated.
I'm quite stuck with this:I have an import table called ReferenceMatchingImport which containsdata that has been sucked from a data submission. The contents ofthis table have to be imported into another table ExternalReferencewhich has various foreign keys.This is simple but one of these keys says that the value inExternalReference.CompanyRef must be in the CompanyReference table.Of course if this is an initial import then it will not be so as partof my script I must insert a new row into CompanyReference andpopulate ExternalReference.CompanyRef with the identity column of thistable.I thought a good idea would be to use an SP which inserts a new rowand returns @@Identity as the value to insert. However this doesn'twork as far as I can tell. Is there a approved way to perform thissort of opperation? My code is below.Thanks.ALTER PROCEDURE SP00ReferenceMatchingImportAS/*Just some integrity checking going on here*/INSERT ExternalReference(ExternalSourceRef,AssetGroupRef,CompanyUnitRef,EntityTypeCode,CompanyRef, --this is the unknown ref which is returned by the spExternalReferenceTypeCode,ExternalReferenceCompanyReferenceMapTypeCode,StartDate,EndDate,LastUpdateBy,LastUpdateDate)SELECT rmi.ExternalDataSourcePropertyRef,rmi.AssetGroup,rmi.CompanyUnit,rmi.EntityType,SP01InsertIPDReference rmi.EntityType, --here I'm trying to run thesp so that I can use the return value as the insert value1,1,GETDATE(),GETDATE(),'RefMatch',GETDATE()FROM ReferenceMatchingImport rmiWHERE rmi.ExternalDataSourcePropertyRef NOT IN (SELECT ExternalSourceRefFROM ExternalReference)
View 3 Replies View RelatedHi! create table testReturn(id int identity(100,1),name varchar(10)) How can I return the value of identity column after inserting the value. Dim objConn As SqlConnection Dim SQLCmd As SqlClient.SqlCommand Dim ds As New DataSet Dim strsql As String Try objConn = New SqlConnection objConn.ConnectionString = _ "Network Library=DBMSSOCN;" & _ "Data Source=localhost;" & _ "Initial Catalog=mydb;" & _ "User ID=userid;" & _ "Password=pass" objConn.Open() strsql = "insert into testReturn values ('a')" SQLCmd = New SqlClient.SqlCommand(strsql, objConn) Dim rowsAffected As Integer = 0 rowsAffected = SQLCmd.ExecuteNonQuery Dim rv As String rv = SQLCmd.Parameters(0).Value.ToString() Response.Write(rv) Catch ex As Exception Response.Write(ex.ToString) End Try
View 5 Replies View Relatedonce upon a time someone told me how to do this, but i forget, and it was for classic asp..
so what im trying to do is create a new record (a workstation) and get back the auto generated ID (its not actually a GUID, its an int which is set to the identity) and then once i have that create other records (for external devices, different table) that will have a link to which machine they are attached to (that Id im looking to get returned)
I know this can be done in a two step process, create the record, query it for its id, and then slap that in my next insert statement for the external devices... but... i know there was a way to do it before and i assume there is a way to do it now...
anyone know how?
Thanks
Justin
I would like to use ADO in a new project but I need to find out how to return the identity field value to ADO out of a stored procedure. I have not done alot with ADO or with SQL 7.0 so if anyone has an example of the SQL and the ADO code that I would need I would greatly appriate it.
Thanks
Im trying to add a record to the DB and then get the primary key for that record. Im doing this but is obviously wrong....
Code:
// set the prepared statement
String sql="INSERT INTO Client(username, country, clientIP, browser, os) VALUES(?,?,?,?,?)";
PreparedStatement pstmt = conn.prepareStatement(sql);
pstmt.setString(1, inUserName);
pstmt.setString(2, inCountry);
pstmt.setString(3, inClientIP);
pstmt.setString(4, inBrowser);
pstmt.setString(5, inOS);
// Insert the row
pstmt.executeUpdate();
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("SELECT SCOPE_IDENTITY()");
System.out.println("Result "+rs);
Any advice??
hi all, lets say i have this insert command being executed from C# to a SQL Db. //store transaction log
SqlCommand cmdStoreTrans = new SqlCommand("INSERT into Transactions(ImportID,ProfileID,RowID) values (@ImportID,@ProfileID,@RowID);",conn);
cmdStoreTrans.Parameters.Add("@ImportID",importId);
cmdStoreTrans.Parameters.Add("@ProfileID",profileId);
cmdStoreTrans.Parameters.Add("@RowID",i);
try
{
conn.Open();
cmdStoreTrans.ExecuteNonQuery();
conn.Close();
}
catch(SqlException ex)
{
throw(ex);
}I need the new Identity number of that record added. how can i get that within THIS Sqlcommand. Currently im closing the connection, creating a new command with 'SELECT MAX(id) from transactions" and getting the value that way, im sure there is a easier way keeping it all within one command object? someone mentioned using something liek @@Identity any help appreciatedTIA, mcm
When I create a tableadapter to do an insert it added
SELECT EventDate, EventID, org_id, ROMEventID FROM ROMEvents WHERE (ROMEventID = SCOPE_IDENTITY())
at the end. This looks useful to me since it implies that I can access ROMEventID which is the auto-incremented identity field.
How would I reference the variable in my .cs file?
My insert is working as ROMEventsTableAdapter ROMEventInsert = new ROMEventsTableAdapter();
ROMEventInsert.InsertIntoROMEvents(theDate, EventID, org_id);
Thanks for any help
Hi @ all
I'm using MSSQL and PHP.
I've got the following sql statement:
$msquery = IF NOT EXISTS (SELECT SerienNr FROM tbl_Auftrag a WHERE a.SerienNr='PC8') INSERT INTO tbl_Auftrag (BMS_AuftragsNr, SerienNr, AuftraggNr, Zieltermin, Kd_Name) VALUES ('455476567','PC8','1','2006-3-2','Fritz')
The Statement itself works fine, but i've got a problem getting a return value whether the insert has succeed, or not. :confused:
mssql_query() always returns true if there occured no error in the statement. But i need to know if the insert procedded or not.
I tried:
$result = mssql_query($msquery);
$succeed = mssql_rows_affected ($result);
And:
$result = mssql_query($msquery);
$succeed = mssql_num_rows($result);
to get the rows, affected by the statement, but both return:
supplied argument is not a valid MS SQL-Link resource
Anyone an idea?
I am inserting a record into a table that automatically generatesunique ids (i.e. Primary Key). Is there anyway to return this id. As Iam using this on ASP.net page and I really need the ID to update thepage with the new details.I think on mysql there is something called LAST_INSERT_ID which doesthis.
View 10 Replies View Relatedhello,
I'm new to store procedure in slq 2000.
I want to create a sproc in my sql 2000 sevrer,I have a table named "Supplier",
now I want to return my identiy field value when I use insert into sql command (insert into "Supplier") successful.
So how to create this store procedure ?
much thanks
Hi,
I am making a program in Visual Basic .NET with SQL Server 2000.
I have a table "MyTable" with a primary key named "Id". The primary key is 'Create Unique' checked and 'Index' selected. When I insert all the fields required, except "Id" of course, I need the new record's "Id" in my VisualBasic program, but I don't know how...
I must do one of them, but don't know how either of them:
-Create a trigger on insertion that will send to the user that sended the insert command the "Id" of the record just created.
or
-get the command in Visual Basic that will send the Insert command with a return field ("Id")
Thanks in advance,
Sebastien Anselmo
I'm having a problem I do an insert into a table but I want to return the value of the identity field of that insert so I can email a confirmation. For some reason this code doesn't work.
Below is the stored procedure I'm calling and below that the code I'm using. What am I doing wrong. The value I have returned is null when it should be a number. Any suggestions. Why does finalMagicNum2 come back null when it should grab the identity field of the inserted record.
CREATE PROCEDURE addMagicRecTest
(
@theSequence int,
@theSubject int,
@theFirstName nvarchar(50)=null
@theLastName nvarchar(75)=null
)
AS
INSERT INTO employees([Sequence],subject,firstname,lastname)
VALUES(@theSequence,@theSubject,@theFirstName,@theLastName)
SELECT @@identity AS finalNum
magicDataConnect = ConfigurationSettings.AppSettings("myDataConnect")
Response.Write(magicDataConnect)
magicCommand = New SqlDataAdapter("addMagicRecTest", magicDataConnect)
magicCommand.ConnectionType = CommandType.StoredProcedure
magicCommand.SelectCommand.CommandType = CommandType.StoredProcedure
' Sequence ID for request
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSequence", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSequence").Value = "41833"
' Subject for new Wac Ticket
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSubject", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSubject").Value = "1064"
' First Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theFirstName", SqlDbType.NVarChar, 50))
magicCommand.SelectCommand.Parameters("@theFirstName").Value = orderFirstName
' Last Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theLastName", SqlDbType.NVarChar, 75))
magicCommand.SelectCommand.Parameters("@theLastName").Value = orderLastName
DSMagic = new DataSet()
magicCommand.Fill(DSMagic,"employees")
If DSMagic.Tables("_smdba_._telmaste_").Rows.Count > 0 Then
finalMagicNum2 = DSMagic.Tables("_smdba_._telmaste_").Rows(0)("finalMagic").toString
End If
I need finalMagicNum2
Can an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?
View 3 Replies View RelatedI have created the following trigger:CREATE TRIGGER [CreateFile] ON OutputTableFOR INSERTASDeclare @filename nvarchar(35)Declare @filecontents nvarchar(2000)Declare @strcmdshell varchar(150)SELECT @filecontents = OutputText FROM INSERTEDSELECT @filename = 'c:' + OutputFileName FROM INSERTEDSELECT @strcmdshell = 'echo '+ @filecontents+ ' >'+ @filenameexec master..xp_cmdshell @strcmdshellIt works fine as long as the column OutputText has no carriagereturns.I have used my Access2K front end to dump about ten lines of text intoOutputText, each line broken by vbcrlf so that OutputText looks like:line1testline2textline3textetc.The trigger won't fire with this text.Is there something I can do to remedy this?lq
View 4 Replies View RelatedI have the following stored procedure, to insert or update a record and return the id field, however the procedure returns two results sets, one empty if it's a new record - is there a way to supress the empty results set?
ALTER PROCEDURE [dbo].[AddNode]
@Name VARCHAR(15),
@Thumbprint VARCHAR(40),
@new_identity [uniqueidentifier] = NULL OUTPUT
AS
BEGIN
UPDATE dbo.NODES
[Code] ....
Dear all,
I am using C# , asp.net and sql server 2005.
Let me explain the situation.
I have written procedure to insert data into the table and return last inserted value by @@identity variable. Now my question is how do I execute this process so that I can
Get last inserted variable values
Please help
thanks
Can an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?
View 2 Replies View RelatedI get this error when I look at the state of my SQLresults object. Have I coded something wrong?Item = In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. conn.Open()
Dim strSql As String
strSql = "INSERT INTO contacts (companyId, sourceId, firstName, lastName, middleName, birthday, dateCreated)" _
& "VALUES ('" & companyId & "', '" & sourceId & "', '" & firstName & "', '" & lastName & "', '" & middleName & "', '" & birthday & "', '" & now & "') SELECT @@IDENTITY AS 'contactId'"
Dim objCmd As SqlCommand
objCmd = New SqlCommand(strSql, conn)
Dim aSyncResult As IAsyncResult = objCmd.BeginExecuteReader()
If aSyncResult.AsyncWaitHandle.WaitOne() = True Then
Dim sqlResults As SqlClient.SqlDataReader
sqlResults = objCmd.EndExecuteReader(aSyncResult)
Dim cid As Integer
cid = sqlResults.Item("contactId")
Me.id = cid
conn.Close()
Return cid
Else
Return "failed"
End If
I would like to INSERT an array of integer into a table in MSSQL Server, then count the number of rows in the table with c++ using ODBC. Here you find my code to do this task:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
#include<tchar.h>
#include <sql.h>
#include <sqlext.h>
#include<sqltypes.h>
[Code] ....
In my code, I would like to Insert the array and then count the number of rows:
SQLTCHAR Statement[] = _T("INSERT INTO information1(Wert1,Wert2) VALUES(?,?) select count(*) as a from information1 ") ;
Problem : My expectation is, that first 9 rows are inserted into table then comes 9 as result to user (if the table is empty) but this code returns me 1 if first the table is empty. If the table is not empty, it returns 1+number of existing rows in the table. If I take a look inside the table, the 9 rows are successfully inserted in it. Only the number of rows in the table is wrong.
Hint : If I monitor the database using SQL Profiler. It looks like this:
Why this statement doesn't work correctly?
Greeting.
I use OdbcConnection inside clr procedure, for getting data. If I use simple EXEC dbo.clr_proc - all is OK. If I use INSERT...EXEC I recive error message: Distributed transaction enlistment failed.
I set MSDTC security options for No Authentification and Allow inbound and Allow outbound, but it's no use.
Have this problem solution? May be, I must use another method to get my data?
P.S. Linked Servers and OPENQUERY is not applicable. Sybase not describe columns in stored proc result set and one stored proc may return different result set by params.
P.S.S. Sorry for bad english.
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
This is my function, it returns SQLDataReader to DATALIST control. How
to return page number with the SQLDataReader set ? sql server 2005,
asp.net 2.0
Function get_all_events() As SqlDataReader
Dim myConnection As New
SqlConnection(ConfigurationManager.AppSettings("..........."))
Dim myCommand As New SqlCommand("EVENTS_LIST_BY_REGION_ALL", myConnection)
myCommand.CommandType = CommandType.StoredProcedure
Dim parameterState As New SqlParameter("@State", SqlDbType.VarChar, 2)
parameterState.Value = Request.Params("State")
myCommand.Parameters.Add(parameterState)
Dim parameterPagesize As New SqlParameter("@pagesize", SqlDbType.Int, 4)
parameterPagesize.Value = 20
myCommand.Parameters.Add(parameterPagesize)
Dim parameterPagenum As New SqlParameter("@pageNum", SqlDbType.Int, 4)
parameterPagenum.Value = pn1.SelectedPage
myCommand.Parameters.Add(parameterPagenum)
Dim parameterPageCount As New SqlParameter("@pagecount", SqlDbType.Int, 4)
parameterPageCount.Direction = ParameterDirection.ReturnValue
myCommand.Parameters.Add(parameterPageCount)
myConnection.Open()
'myCommand.ExecuteReader(CommandBehavior.CloseConnection)
'pages = CType(myCommand.Parameters("@pagecount").Value, Integer)
Return myCommand.ExecuteReader(CommandBehavior.CloseConnection)
End Function
Variable Pages is global integer.
This is what i am calling
DataList1.DataSource = get_all_events()
DataList1.DataBind()
How to return records and also the return value of pagecount ? i tried many options, nothing work. Please help !!. I am struck
I'm a Reporting Services New-Be.
I'm trying to create a report that's based on a SQL-2005 Stored Procedure.
I added the Report Designer, a Report dataset ( based on a shared datasource).
When I try to build the project in BIDS, I get an error. The error occurs three times, once for each parameter on the stored procedure.
I'll only reproduce one instance of the error for the sake of brevity.
[rsCompilerErrorInExpression] The Value expression for the query parameter 'UserID' contains an error : [BC30654] 'Return' statement in a Function, Get, or Operator must return a value.
I've searched on this error and it looks like it's a Visual Basic error :
http://msdn2.microsoft.com/en-us/library/8x403818(VS.80).aspx
My guess is that BIDS is creating some VB code behind the scenes for the report.
I can't find any other information that seems to fit this error.
The other reports in the BIDS project built successfully before I added this report, so it must be something specific to the report.
BTW, the Stored Procedure this report is based on a global temp table. The other reports do not use temp tables.
Can anyone help ?
Thanks,
I am trying to bring my stored proc's into the 21st century with try catch and the output clause. In the past I have returned info like the new timestamp, the new identity (if an insert sproc), username with output params and a return value as well. I have checked if error is a concurrency violation(I check if @@rowcount is 0 and if so my return value is a special number.)
I have used the old goto method for trapping errors committing or rolling back the transaction.
Now I want to use the try,catch with transactions. This is easy enough but how do I do what I had done before?
I get an error returning the new timestamp in the Output clause (tstamp is my timestamp field -- so I am using inserted.tstamp).
Plus how do I check for concerrency error. Is it the same as before and if so would the check of @@rowcount be in the catch section?
So how to return timestamp and a return value and how to check for concurrency all in the try/catch.
by the way I read that you could not return an identity in the output clause but I had no problem.
Thanks for help on this
SM haig
hi, good day,
i have using BCP to output SP return data into txt file, however, when it return nothing , it give SQLException like "no rows affected" , i have try to find out the solution , which include put "SET NOCOUNT ON" command before select statement, but it doesn't help :(
anyone know how to handle the problem when SP return no data ?
thanks in advance
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
I working on a form using an SQL DataSource. I am going to add a where clause. In that where clause a value from a label will be passed from the user.
How do I pass to the HTML Source the label value from the where clause. The value can change from user to user.
Sample below:
SELECT [KeyRolesID], [KeyRolesDesc] FROM [KeyRoles] WHERE ([JobCodeFamily] = @JobCodeFamily).
I want to replace the @JobCodeFamily which is currently coded with a value from the Sql DataSource in the design form with a label value entered by the user.
Hi, guys
I used an exported wcf service as a web service, try to use it as the reporting datasource,
[OperationContract]
DataSet GetTestReportData();
the app.config in the service host:
<configuration>
<appSettings>
<add key="BaseReportingAddress" value="http://localhost:8999/ReportHandlerService"/>
</appSettings>
<system.serviceModel>
<services>
<service name="Reporting_Handler.ReportHandlerService">
<endpoint address="http://localhost:8999/ReportHandlerService"
binding="basicHttpBinding"
behaviorConfiguration="ReportingServiceBehavior"
contract="Reporting_Handler.IReportingHandler"/>
</service>
</services>
<behaviors>
<behavior name="ReportingServiceBehavior">
<metadataPublishing
enableGetWsdl="true"
enableMetadataExchange="true"
enableHelpPage="false">
</metadataPublishing>
</behavior>
</behaviors>
I set the datasource type as xml and the connection string to http://localhost:8999/ReportHandlerService, the query string for dataset is
<Query>
<SoapAction>
http://tempuri.org/IReportingHandler/GetTestString
</SoapAction>
<Method Namespace="http://tempuri.org/IReportingHandler/"
Name="GetTestString">
</Method>
</Query>
but it doesn't work, I tried use a pure asp.net web service and it works. can anyone help me to set the connecting string for datasource and query for dataset when it using wcf as the web service? Thanks in advance.
bruce
Hi All,
I have a question about the datasource that we create on the Report Manager. What is it used for? In the below connection string which is given in the "Connection String" text box of a datasource link:
"Data Source=ProdServer;Initial Catalog=Northwind"
What is this datasource used for? Is it used only to use the ReportServer database or even our queries incorporated in the RDL files will be run against this datasource? I think the latter should not happen because while creating RDL files also, we provide a connection string to run the stored procedures against that datasource.
Please let me know about the same.
Thanks a lot and let me know if the question is not clear.
Manoj Deshpande.