The result is accurate but the query execution time is 3-4 minutes for 10 fact records, when i use multiple dimension. it is showing me 0 valus for this measure for all the members for the dimesion attribute which doen't have any customer order. example it shows all the member of date dimension. is there any way to reduce the rows. i think this is the reason to take more execution time.when i use EXCCLUDEEMPTY the result is NULL
 set buyerset as exists(dimcustomer.leval02.allmembers,custoertypeisRetailers,"Sales") set saleset(buyerset) set custdimensionfilter as {custdimensionmemb1,custdimensionmemb2,custdimensionmemb3,custdimensionmemb4} set finalset as exists(salest,custdimensionfilter,"Sales") Set ProdIP as dimproduct.dimproduct.prod1 set Othersset as (cyears,ProdIP) (exists(([FINALSET],Othersset,dimension2.dimension2.item3),[DimCustomerBuyer].[ParentPostalCode].currentmember, "factsales")).count
I have the table below and want to show the prop_code if the rent_review_date count is less than 1 in 12 months. This means to show only propcode if there has not been any rent update since the first rent_review_date
DECLARE @table TABLE ( Prop_Code INT ,Current_Rent INT ,Revised_Rent INT ,Rent_Review_Date varchar(10) ,Rent_Review_Time DATEtime)
Is there a way to define a query-filter (Example: WHERE column1 > 5 AND column2 = 'value') in a function?
So I can create a query like this:
SELECT *  FROM Table  WHERE MyFunction()
I know it's a bit of a strange question, but I'm writing a dynamic software that will have the ability to run Stored Procedures on any database to create some data-checks. Through parametrisation, a user can define for a specific Stored Procedure that some results are no longer necessary in the result-set.
Example: ID - Name - State 1 - Jozef De Veuster - Mad 2 - Piet Husentruut - Not Happy 3 - Jeroen Meus - Angry
Is the result of a Stored Procedure "Show_me_unhappy_persons". But we already know that Jozef De Veuster is ALWAYS Mad, so a user can say: Exclude ID = 1, so it won't appear anymore in the result.
I want to handle this by doing:
SELECT * FROM PeopleStates WHERE --Some stuff-- AND CheckUserExclusions(SomeID) And CheckUserExclusions will translate to "NOT (ID = 1)"
I need to translate a user€™s regional setting into one of our own language codes before I send it through as a filter to the model query. If our language codes were the same, the filter would look like this in the report filter - Language Code = GetUserCulture() Which translates to this in the database query (for us english) - table.language_code = 'EN-us' And of course I need it to look like this - table.language_code = 'ENG'
I would like the logic to be globally available to all report writers (ie not forcing each report writer to have an iif or case stataement). I was thinking custom assemblies or maybe a database function, but at this level of the filter, I cannot seem to figure out how to embed a database function call to apply to the filter criteria like this Language Code = dbo.ConvertFcnIWrote(GetUserCulture()) Or how I would access the custom assembly in the filter expression.
Do you have a recommended implementation for this situation?
What I want to do is to query this table to return me a list of product type and category, and the total number of products in each category, and the count of number of instock, and locked.
i.e. Type, Category, TotalCount, NumberInStock, NumberNoStock, NumberLocked, NumberUnlocked.
I need to perform a summation on the results of a COUNT but I'm not sure what's the best way to do it.
Example: TableA --------------- CaseID (int) FollowupCorrespondence (int) (not guaranteed to be sequential) CustomerName (varchar)
/**Get the total number of followups for each customer case, and display the customer's name.*/ select T.caseid, sum(T.cnt), T.CustomerName, T.FollowupCorrespondence from (select CaseID, count(FollowupCorrespondence) as cnt, CustomerName, FollowupCorrespondence from tableA group by caseID, CustomerName, FollowupCorrespondence; ) as T group by caseid, customername, followupcorrespondence
I get the following output, but what I need is to get '4' in each row of the SumCases column. CASEID SUMCases CUSTOMERNAME FOLLOWUPCORRESPONDENCE ---------------------------------------------------------------------------------------------------------------- 1.................1.............John Doe................1 1.................1.............John Doe................2 1.................1.............John Doe................3 1.................1.............John Doe................4
I have created the following query... and need to get the total records display for my report. I have tried adding in the count(*) function to my select list, but I get errors. Any help is appreciated.
select t.value,sum(t.countvalue) as totalcount from (
select
sm.value,count(sm.value) as countvalue
from subjectbase s join stringmap sm on s.organizationid = sm.organizationid
inner join audit a on s.subjectid=a.subjectid
inner join incidentbase i on i.subjectid=s.subjectid
where a.auditid= @audit and (i.modifiedon between @startdate and @enddate) and sm.attributename = 'contractservicelevelcode' and sm.ObjectTypeCode = 112
group by sm.value
) t
group by t.value
)
value totalcount ------------------ NHLBI Employee329 NIH Employee329 Public329 VIP329
instead of different values i m getting same... there is something wrong in joins..can anyone help me?
I am creating a report that will print the customer's Invoices grouped by SalesPerson. I created a variable in the dataset so that it sets to the status of the invoce to Paid, Not Paid and Partial. All is working fine so far. I have a groupfooter for each salesperson where I want to print the total no. of invoices for that SalesPerson that are PAID, NONPAID and Partaial. So on the expressions of that fields, I have the following code. It allows me to print the report, but it prints #Error for the value of thoses field I also want to print the the same fields in the report total area. Any ideas ??
I am trying to divide 2 funcitons by each other and I am coming back with 0 as my result in one of them while I am getting the correct answer in another. The two columns I am trying to pull with functions are:
SELECT
sum(D.PrincipalBal)/sum(L.PrincipalBal)*100 as DelqRatioByBal , count(D.LoanID)/count(L.LoanID)*100 as DelqRatioByCnt
FROM Loan L
INNER JOIN DelqINFO D on D.LoanID = L.LoanID
I get the correct result back for 'DelqRatioByBal' but I get 0 back for 'DelqRatioByCnt'
I need a function to count business days (exclude Sat, Sun) that I can call within a view. I would rather not build a "calendar table" this will be used ongoing for years into the future.
Does anyone have anything like this they could share? If there is another source you could direct me to I would appreciate that as well.
Hi, i created a cube that has 2 measures. I created the measures by selecting the columns from my fact table, but the function that applied in the measures was the sum function. I need to apply the count function in my measure. How can i do that?
I have data like this in a two column temporary table -ID Age23586 323586 323586 223586 223586 123586 123586 123586 123586 1I need to create a temporary table that look like this:ID Age1 Age2 Age3 Age423586 5 2 2 0However, what I get is this:23586 5 NULL NULL NULL23586 NULL 2 NULL NULL23586 NULL NULL 2 NULLHere is the query that I am using...select managed_object_id, (select count(Age) where Age = 1) As Age1,(select count(Age) where Age = 2) as Age2,(select count(Age) where Age = 3) as Age3,(select count(Age) where Age = 4) as Age4into #enhancementCount from #enhancementsgroup by managed_object_id, AgeWhere's my mistake?Thanks-Danielle
I have a database that contains a column for UnitName , BeginDate andEndDate.I want to pass two parameters (@BeginDate and @EndDate) and retrieve atable of valuesthat include UnitName along with Counts for each UnitName.SELECT UnitName, COUNT(BeginDate) AS Start(SELECT COUNT(EndDate) AS Finish WHERE EndDate BETWEEN @BeginDate AND@EndDate)FROM TableWHERE BeginDate BETWEEN @BeginDate AND @EndDateGROUP BY UnitNameORDER BY UnitNameThis works. But when I try to add another count by using a subselect Iget an error dealing with GROUP BY not including the column in mysubselect.How is the best way to Count two columns using Group By.
I have a really basic question. The following SQL query works for me:
Select EnterUserID, Enterdate from tblCsEventReminders where EnterDate >= Convert(datetime, '2015-04-01')
I am essentially trying to write a query to count the number of user logins after a certain date, so I need to count 'EnterUserID' but I am having problems getting the count() function to work.
This is so complicated (for me) because I usually only work with single table and simple queries (SELECT, INSERT, UPDATE), but now I am in a situation where I am stuck.
What I am trying to archive is that: when a project manager logged-into his/her account, a grid-view will show a quick overview for all of his/her projects (id, created date, name and how many files are in pending) like below picture:
3 tables will be involved are:
Sample data for manager_id = 11
I tried this query but it not worked, it seems to display all columns right but the COUNT pending files column (assume the manager_id = 11)
SELECT COUNT(file_id) as 'Pending files', projects.project_id, projects.project_name, projects.status, projects.start_date FROM ((project_manager INNER JOIN files ON project_manager.mag_id = files.manager_id AND project_manager.mag_id = 11 AND file_status = 'Pending') INNER JOIN projects ON projects.project_id = project_manager.project_id) GROUP BY projects.project_id, projects.project_name, projects.status, projects.start_date ORDER BY projects.status, projects.start_date DESC
I want my query to list all SSNS that have more than one record in the table. I have this query:
Code:
SELECT SSN, name4, count(*) from [1099_PER] group by SSN, name4 having count(SSN) > 1
It does retrieve the right SSNS and tells me how many times the SSN occurs in the table. However, I want my query results to display their full records.
For example
SSN NAME4 COUNT 123445555 WALTER - 4
I want the query to show me all four records for this SSN. I thought removing the count field would do this, but it still gives me only one instance of each SSN.
I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.
Right now I am achieving this by the following case statement
SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class' WHEN Stcount>=10 and StCount<=50THEN 'Medium Class' WHEN Stcount>50 THEN 'Big Class' END FROM( select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl
COL1 | COL2 | COL3 | COL4 1 | FD | DR. A | Y 2 | FD | DR. A | Y 3 | FD | DR. A | N 4 | FD | DR. A | Y 5 | FD | DR. A | Y 6 | PF | DR. A | Y 7 | FD | DR. B | Y 8 | PF | DR. B | N
Consider the script below:
SELECT COL2, COL3, COUNT(COL1) AS TOTALS FROM CASES GROUP BY COL2, COL3 ORDER BY COL3, COL2
The script above produces the following output:
COL2 | COL3 | TOTALS FD | DR. A | 5 PF | DR. A | 1 FD | DR. B | 1 PF | DR. B | 1
I need to add one more column to the script that counts records with 'Y' in COL4 for each COL1 category (FD, PF). The final dataset would look like this:
COL2 | COL3 | TOTALS | NEWCOL FD | DR. A | 5 | 4 PF | DR. A | 1 | 1 FD | DR. B | 1 | 1 PF | DR. B | 1 | 0
I am having a hard time trying to use COUNT() on multiple columns with the GROUP BY restrictions that exist.
I have created a report which has 3 groups. The report output as shown below. I am having trouble getting the SUM of Total Credtis for each Org.
Can't seem to get the total 42 and 16 (highlighted), but can get total unists 11 and 13. I get expression contains aggregate function. This is because Units assessed is the Count of IDs (details hidden from the report).
Report has three groups Org , Assessor and Unit.
Can someone please help me with this?
Appreciate help.
Thank you,
Ski
Org 1(Group1)
Unit Credits Units Assessed(# of Trainees) TotalCredits
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator): =CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1])) Records in time interval (numerator): =COUNTROWS(analyticJudConsist) Percent: =[countrows]/[denominatorCare]
I am working on a report using SQL server Business Intelligence development studio in which I need to count the total number of saleslines that either has a status : Delivered or Invoiced.
I am using the inbuilt count function under the calcuations, as: Count(Fields!SalesStatus.Value, scope). I am not sure what scope means here however, I read that scope refers to some dataset, dataregion or grouping. I dont know what that means. I shall be really thankful if someone can help me with this.