Datetime And Varchar Conversion Issues

Jan 30, 2008

Basically, I'm trying to take two dates and find the difference in hours b/t the two, sql server 2000. I've tried change the variables out from datetime to varchars even though it shouldn't matter. When I put the block of code out of the stored procedure and run it in line it works fine, I'M LOST.........

I get the errors everytime it runs into the first block, I get the error again when the block is hit again farther down in the procedure. I get:

Server: Msg 242, Level 16, State 3, Procedure tmpRyan_spRail_Job_NoMovement, Line 211
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Server: Msg 242, Level 16, State 1, Procedure tmpRyan_spRail_Job_NoMovement, Line 360
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
ERR dates Aug 4 2005 11:16PM.
Server: Msg 242, Level 16, State 3, Procedure tmpRyan_spRail_Job_NoMovement, Line 211
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Server: Msg 242, Level 16, State 1, Procedure tmpRyan_spRail_Job_NoMovement, Line 360
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
ERR dates Aug 3 2005 12:35PM.
Server: Msg 241, Level 16, State 1, Procedure tmpRyan_spRail_Job_NoMovement, Line 211
Syntax error converting datetime from character string.

Code:

Declare
,@CodePair varchar(10
,@CodePairTimeDiff dec ,
@tmpTimeVar datetime ,
@tmpTimeCharVar varchar(30)


IF @NextStatusDate IS NOT NULL AND @StatusDate IS NOT NULL
BEGIN
set @tmpTimeCharVar = DATEDIFF(SECOND, @NextSTatusDate, @StatusDate)
set @tmpTimeVar =
(
CASE WHEN @tmpTimeCharVar/3600<10 THEN '0' ELSE '' END
+ RTRIM(DATEDIFF(SECOND,@NextSTatusDate, @StatusDate)/3600)
+ ':' + RIGHT('0'+RTRIM((@tmpTimeCharVar % 3600) / 60),2)
+ ':' + RIGHT('0'+RTRIM((@tmpTimeCharVar % 3600) % 60),2)
)
END
IF @@ERROR <>0
PRINT 'ERR dates' + Convert(varchar(20), @NextStatusDate) + '.'


inside update statement

,CodePairTimeDiff = CONVERT(dec, (100 * DATEPART(HOUR, @tmpTimeVar)
+ DATEPART(MINUTE, @tmpTimeVar))) / 60

View 12 Replies


ADVERTISEMENT

SQL 2012 :: Conversion Of Varchar To Datetime - Getdate?

Oct 2, 2014

When you converting varchar to date time

SELECT convert(varchar,getdate())

What is the getdate here

i.e. we are converting any value to today's date

View 9 Replies View Related

SQL Server 2012 :: Varchar To Datetime Conversion

Aug 14, 2015

I have column moddat which is of varchar(10,null)

Here is my data:
20020415
20020508
19991104
19990701
20040514
20021112
20020124
19990628
20020514
20010822

I want those data in this format YYYY-MM-DD

How to convert varchar to datetime?

View 2 Replies View Related

SQL Server 2014 :: Varchar Value Conversion To Datetime Format

Apr 8, 2015

I'm trying to convert a varchar value to datetime format but it throwing below error:

The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.

here is sample query:

declare @test varchar(20)
set @test ='30/04/2015 23:59:59'

select CONVERT(datetime, @test)

One interesting observation above query run fines in Sql 2008 but not in Sql 2014...

View 3 Replies View Related

SQL Server 2008 :: Conversion Of Varchar Data Type To Datetime Resulted In Out Of Range Value

May 14, 2015

I have problem to execute query with interval date.

If try this query I don't have problem and the output is correct:

SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '01/01/2015', 121)
AND CONVERT (datetime, '09/01/2015', 121);Instead if try this I have error:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '25/01/2015', 121)
AND CONVERT (datetime, '28/01/2015', 121);

[Err] 22007 - [SQL Server]The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.

View 3 Replies View Related

How To Convert Datetime From Varchar To Datetime

Sep 11, 2007

hi,
How do i convert a varchar field into the datetime data type? the reason i need this lies in the requirement that in the earlier data base the column that is hlding the date value is having the data type as varchar. and in the new design the column data type is datetime. i am using sql scripts for the data migration from the older design to the newer and got stuck with this datetime convertion issue. do let me know the best possible solution.

following are the sample data that is theer in the older table for the date.


12/12/2003
1/13/2007
01132004
1-1-2004
1.2.2001



there is no uniformity of the data that is stored currently.



thnkx in adv.
rahul jha

View 11 Replies View Related

Need Help In Sql(Varchar To Date Conversion)

Jan 10, 2002

Hi:
here i am giving one example with Emp table and fields ssn,empjoindate


I have a table with field empjoindate as varchar(10).I need number of employees joined between 12/23/01 and 01/04/02.I ran this query using select ssn from EMP where convert(varchar(10),empjoindate,101) between '12/23/01' and '01/04/02'.it is not fetching any data.

Please help me
Thanks
Tej

View 8 Replies View Related

Conversion From Varchar To Nvarchar

Aug 4, 2006

Hi,

Can someone please explain to me how the datapages in Microsoft SQL Server 2000 works. The pages are supposed to be 8K, that is 8192 bytes of which only 8060 are accessible for data storage (due to overhead).
Now, I currently have a table containing 8 fields. Two of these fields are varchar and should be converted to nvarchar. One of the varchar fields is limited to 255 characters and the other to 4000 characters. When I convert the 255 characters field to nvarchar it works just fine, but when I want to convert the 4000 characters field I get an error from MS SQL saying that it gets to big. Is the error only for the 4000 characters field (which growths to 8000 bytes when using nvarchar instead of varchar) or must the whole table fit into one datapage?
Could a blob maybe solve my problem, or will I face new problems when storing unicode characters in a blob?

Thanks in advance

View 3 Replies View Related

Varchar To Date Conversion

May 30, 2008

I have Field which contains Date in dd/mm/yy fromat. I need to convert it into DateTime format so that it can be processed.

Please help

View 2 Replies View Related

Conversion Error From Varchar To Int

Jan 12, 2008

I am getting an issue when I am using a stored proc from a view.
I am to returning values, one being a varchar(50).

When I run the view, the values for this column and all others are returned fine.
When I run the stored procedure, the following error is shown:

Conversion failed when converting the varchar value 'ejoy' to data type int.

All other values return fine bar this one column and as I said its already a varchar in the table so I don't know why sql server (2005) thinks I want to convert it, I don't and at no point have tried to.
Below is my query statement

quote:SELECT u.User_fname, pv.PV_address, p.Start_monitoring, p.Last_monitoring, p.Period_of_monitoring, m.Ongoing_maintenance,
m.Savings_for_inverter_replacement, m.Monitoring, m.Total_anual_maint_and_monitor
FROM PerformanceData p, MonitoringCost m, Photovoltaic pv, Users u
WHERE p.Performance_id=m.MonitoringCost_id and
pv.PV_id=p.Performance_id and
pv.PV_id=m.MonitoringCost_id and
u.User_id =p.Performance_id and
u.User_id =pv.PV_id and
u.User_id = m.MonitoringCost_id

This error has been displayed
quote:Conversion failed when converting the varchar value 'ejoy' to data type int.

Any ideas much appreciated...

View 16 Replies View Related

Conversion From NText To Varchar

Nov 12, 2006

Hi All,

Is it possible to convert a nText column in the source to varchar in the destination. I tried using a DataConversion block but there is no option for Ntext, I think am misising somehting here. Can someone guide me here?

thanks in advance,

View 4 Replies View Related

Ntext To Varchar(max) Conversion

Sep 14, 2007


I was just wondering if someone could help me with data conversion from ntext to varchar(max) in SSIS.

I have managed to do conversion from ntext to varchar(n) using the following two step process

(1) ntext to text stream [DT_TEXT]
(2) text stream to string[DT_STR]


Thanks,
Asaf

View 3 Replies View Related

Varchar To Numeric Conversion

Nov 22, 2007

Hello All,
I am querying from a table which has all varchar values. I want to display the result in graph and hence would need the varchar to be converted to Decimal. But I am getting the error : Error converting data type varchar to Numeric. Here is the SELECT code: Can you please help me do this? I'll post the script in the next post in 10 minutes....

View 3 Replies View Related

Conversion Failed When Converting The Varchar Value

Aug 2, 2007

why do i have this error? not converting a varchar into int 1 ALTER PROCEDURE dbo.RevertDB
2 (
3 @Log varchar(MAX) = NULL OUTPUT
4 )
5
6 /* Reverts Database to original "Clean" State */
7 AS
8 SET NOCOUNT OFF
9 DECLARE @RowsInDB AS int
10 SET @Log = 'RevertDB Started at ' + CAST(GETDATE() AS varchar(50)) + '<br />'
11
12 /* *** Disable Constraints ***
13 ALTER TABLE Booking NOCHECK CONSTRAINT ALL
14 ALTER TABLE InventoryPC NOCHECK CONSTRAINT ALL
15 ALTER TABLE PC NOCHECK CONSTRAINT ALL
16 ALTER TABLE Platform NOCHECK CONSTRAINT ALL*/
17
18 /* *** Start Deletes *** */
19 DELETE FROM Booking
20 SET @Log = @Log + 'Clear Table Booking - Done' + '<br />'
21 SET @RowsInDB = (SELECT COUNT(BookingID) FROM Booking)
22 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
23
24 DELETE FROM InventoryPC
25 SET @Log = @Log + 'Clear Table InventoryPC - Done' + ''
26 SET @RowsInDB = (SELECT COUNT(InventoryID) FROM InventoryPC)
27 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
28
29 DELETE FROM PC
30 SET @Log = @Log + 'Clear Table PC - Done' + '<br />'
31 SET @RowsInDB = (SELECT COUNT(PCID) FROM PC)
32 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
33
34 DELETE FROM Platform
35 SET @Log = @Log + 'CLear Table Platform - Done' + ''
36 SET @RowsInDB = (SELECT COUNT(PlatformID) FROM Platform)
37 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
38
39 /* *** Enable Constraints ***
40 ALTER TABLE Booking WITH CHECK CHECK CONSTRAINT ALL
41 ALTER TABLE InventoryPC WITH CHECK CHECK CONSTRAINT ALL
42 ALTER TABLE PC WITH CHECK CHECK CONSTRAINT ALL
43 ALTER TABLE Platform WITH CHECK CHECK CONSTRAINT ALL*/
44
45 SET @Log = @Log + '*** End Truncates ***' + '<br />'
46 /* *** End Truncates *** */
47
48 /* *** Start Insert Platform *** */
49 SET @Log = @Log + 'Start Insert Platform' + '<br />'
50
51 EXEC dbo.InsertPlatfrom 'Windows XP SP2 Professional Edition', 'Some description for Windows XP SP2 Professional Edition over here …'
52 EXEC dbo.InsertPlatfrom 'Windows Vista Ultimate', 'See everything you''re working on more clearly with Windows Aero, and quickly switch between windows or tasks using Windows Flip 3D and Live Thumbnails. You can easily find what you need—when you need it―with Instant Search and live icon previews that display the actual contents of your files. And while you''re at it, give your personal productivity a boost with instant access to the information you care about using Windows Sidebar and Gadgets. Put these easy-to-use and customizable mini-applications on your desktop and reveal the information you''re looking for at a glance. Website: http://www.microsoft.com/windows/products/windowsvista/seeit/default.mspx'
53 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Tiger', 'Some description for Apple Mac OS X Tiger over here …'
54 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Leopard', 'Desktop: The new look of Leopard showcases your favorite desktop image and puts new file Stacks at your fingertips for a stunning, clutter-free workspace. Finder: Browse your files like you browse your music with Cover Flow. Time Machine: See how your system looked on any given day and restore files with a click. Website: http://www.apple.com/macosx/leopard/features/'
55 EXEC dbo.InsertPlatfrom 'Red Hat Linux', 'Some description for Red Hat Linux over here …'
56
57 SET @Log = @Log + 'Rows In Platform: ' + CAST((SELECT COUNT(PlatformID) FROM Platform) AS varchar(10)) + '<br />'
58 /* *** Start Insert PC *** */
59 SET @Log = @Log + 'Start Insert PC' + '<br />'
60
61 DECLARE @WinXP int, @WinVista int, @OSXTiger int, @OSXLeopard int, @RedHat int
62 SET @WinXP = (SELECT PlatformID FROM Platform WHERE Title = 'Windows XP SP2 Professional Edition')
63 SET @WinVista = (SELECT PlatformID FROM Platform WHERE Title = 'Windows Vista Ultimate')
64 SET @OSXTiger = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Tiger')
65 SET @OSXLeopard = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Leopard')
66 SET @RedHat = (SELECT PlatformID FROM Platform WHERE Title = 'Red Hat Linux')
67
68 EXEC dbo.InsertPC 'Fusion PC One', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '1GB Dual Channel DDR2 667 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @WinXP
69 EXEC dbo.InsertPC 'Fusion PC Two', 'Description here ...', 'Intel Core2 Duo E6850 3 GHz 1333MHz', '2GB Dual Channel DDR2 800 SDRAM', '240GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '24" 3000:1 Wide Screen LCD', @WinVista
70 EXEC dbo.InsertPC 'Fusion PC Three', 'Description here ...', 'AMD Athlon 64 X2 Dual Core 6000+ 3 GHz', '2GB Dual Channel DDR2 667 SDRAM', '240GB SATA2 NCQ HDD', 'ATI Radeon Cross Fire 2900 256MB GDDR3', '24" 3000:1 Wide Screen LCD', @WinVista
71 EXEC dbo.InsertPC 'Fusion X1', 'Description here ...', 'Intel Core2 Extreme Q6850 3 GHz 1333MHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '30" 3000:1 Wide Screen LCD', @OSXLeopard
72 EXEC dbo.InsertPC 'Fusion X2', 'Description here ...', 'AMD Athlon 64 FX 74 3 GHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8900 Ultra SLI 256MB GDDR3', '30" 3000:1 Wide Screen LCD', @WinVista
73 EXEC dbo.InsertPC 'Fusion Tiger 1', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '2GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3 SLI', '22" 3000:1 Wide Screen LCD', @OSXTiger
74 EXEC dbo.InsertPC 'Fusion Linux 1', 'Description here ...', 'AMD Athlon 64 X2 6000+ 3 GHz', '1GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @RedHat
75
76 SET @Log = @Log + 'Rows In PC: ' + CAST((SELECT COUNT(PCID) FROM PC) AS varchar(10)) + '<br />'
77
78 /* *** Start Insert Inventory *** */
79 SET @Log = @Log + 'Start Insert Inventory' + '<br />'
80
81 DECLARE @F1 int, @F2 int, @F3 int, @FX1 int, @FX2 int, @FT1 int, @FR1 int
82 SET @F1 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC One')
83 SET @F2 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Two')
84 SET @F3 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Three')
85 SET @FX1 = (SELECT PCID FROM PC WHERE Title = 'Fusion X1')
86 SET @FX2 = (SELECT PCID FROM PC WHERE Title = 'Fusion X2')
87 SET @FT1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Tiger 1')
88 SET @FR1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Linux 1')
89
90 EXEC dbo.InsertInventory 10, @F1, 2.5, 'iCluster Fusion One'
91 EXEC dbo.InsertInventory 10, @F2, 2.5, 'iCluster Fusion Two'
92 EXEC dbo.InsertInventory 10, @F3, 2.5, 'iCluster Fusion Three'
93 EXEC dbo.InsertInventory 6, @FX1, 6, 'iCluster Fusion X1'
94 EXEC dbo.InsertInventory 6, @FX2, 6, 'iCluster Fusion X2'
95 EXEC dbo.InsertInventory 10, @FT1, 3, 'iCluster Fusion Tiger One'
96 EXEC dbo.InsertInventory 30, @FR1, 2, 'iCluster Fusion Linux One'
97
98 SET @Log = @Log + 'Rows In Inventory: ' + CAST((SELECT COUNT(InventoryID) FROM InventoryPC) AS varchar(10))
99
100 RETURN @Log
  if i remove the last line then all is well. but i get "An SqlParameter with ParameterName '@Log' is not contained by this
SqlParameterCollection."

View 2 Replies View Related

Timestamp To VARCHAR Conversion (URGENT)

Jun 14, 2002

I need to pass a timestamp value to a varchar variable.CAST/Convert doesn't seem to help.

Any other work around ?

Thanks in advance.

View 1 Replies View Related

Conversion Failed When Converting The Varchar Value ...

Dec 6, 2006

I am trying to have the aggregate value 1 replaced by 'only one' in my results.

My data looks like this:


Customer_id (int) ; Salesperson_id
1 ; 1
2 ; 1
3 ; 1
4 ; 2
5 ; 2
6 ; 3


...this is the solution I tried:


select
case when count(convert(varchar(15), customer_id)) = 1
Then 'only one customer'
else count(convert(varchar(15), kund_id)) end as no_of_customers,
salesperson_id
from customerdb
group by
salesperson_id

...and this is the result I was hoping for


no_of_customers ; salesperson_id
3 ; 1
2; 2
only one customer;3


...but SQL server only returns: Conversion failed when converting the varchar value ...

View 1 Replies View Related

Conversion Failed When Converting Varchar To Int

May 26, 2008

Hi guys,



My query was working fine until I added the red writing below.

Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.

Now when I run it I get

Conversion failed when converting the varchar value 'po_num' to data type int.



Any ideas? Thanks!



SELECT t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

MIN(

CASE

WHEN t8.linestatus = 'O'

THEN t9.docnum

ELSE NULL

END) po_num,

t10.docduedate





FROM

(SELECT t0.product product ,

SUM(

CASE

WHEN t0.qty_topick <> t0.qty_picked

THEN t0.qty_topick - t0.qty_picked

ELSE 0

END) shorted

FROM rbeacon.dbo.shipline2 t0

INNER JOIN rbeacon.dbo.shiphist t1

ON t0.packslip = t1.packslip

WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)

GROUP BY t0.product

) t3

INNER JOIN comparison.dbo.vlgxplc t2

ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS

LEFT JOIN

(SELECT t0.product AS product,

SUM(t0.quantity) AS onhand

FROM rbeacon.dbo.binlocat t0

GROUP BY t0.product

) t4

ON t3.product = t4.product

INNER JOIN wbau.dbo.oitm t5

ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.ocrd t6

ON t5.cardcode = t6.cardcode

INNER JOIN wbau.dbo.oitm t7

ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.por1 t8

ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.opor t9

ON t8.docentry = t9.docentry

LEFT JOIN comparison.dbo.podatetest('po_num') t10

ON t10.docnum = t9.docnum



WHERE t3.shorted <> 0

GROUP BY t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

t6.cardname,

t10.docduedate

ORDER BY t2.u_vlgx_plc,

t6.cardname ,

t3.product

View 9 Replies View Related

String To Varchar Conversion - Sybase And SSRS

Oct 3, 2005

Hi,

I am having an issue with a Report in SSRS against a Sybase db.

The dataset for the report is a Sybase stored proc which is passed a parameter (varchar). When I run the proc in Sybase it runs fine, when I run it in SSRS in the data tab it runs fine, but when I try to preview the report, or run from IE after deploying it I get the following error:

An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Query execution failed for data set 'Table_1'. (rsErrorExecutingCommand) Get Online Help
The given type name was unrecognized

Looks like it is an error converting the string in SSRS to a varchar in Sybase, but I don't know how to fix it.

If I create a table with an identity (int) column and the varchar column, join this to the proc and pass the int as the parameter the report works fine!! (This is not an option in production though.)

I am using SybaseASE OLE DB Provider Version 02.70.0032

Any ideas?

TIA,
Guytz

View 1 Replies View Related

SQL Server 2012 :: Conversion Failure Varchar To Int

Dec 15, 2014

How do I pass a variable to an INT calculation?

CREATE PROC CLEAR_MY_TABLE
@TableStat varchar(30)
AS
If OBJECT_ID('MyDB.dbo.' + @TableStat + '') is not null
BEGIN
---PRINT 'I FOUND THE TABLE'
DECLARE @count INT = -1;
SELECT @count = (Select COUNT(*) FROM [dbo]. + @TableStat);
IF (@count > 0)
BEGIN
TRUNCATE TABLE @TABLESTAT
END

View 8 Replies View Related

T-SQL (SS2K8) :: Conversion Failed When Converting Varchar To Int

Mar 6, 2015

I have a statement that I'm having trouble converting:

select * from emails join InternalContacts On emails.EmailAddress = InternalContacts.EmailID
When I run this I get -

Conversion failed when converting the varchar value 'credentialing@floridaeyeclinic.com' to data type int.

What is the correct syntax to convert?

View 2 Replies View Related

Conversion Failed When Converting The Varchar Valu

Mar 6, 2008

I am recieving the following error when executing the following code. Field MonData is nvarchar (80), the only integer feild in the concatination is @Cnt all other fields are varchar or nvarchar. If I remove the everything past space(22) it works fine. I double checked the length and it does not exceed 80 bytes.
Can anyone see what I am doing wrong?

INSERT INTO tbl_Export
Select DISTINCT TOP(1) space(32) + '9' + space(2) + @Cnt + space(2) + Sys + space(2) +
Prin + space(22) + 'TEN' + space(1) + 'ZZ' As MonData
FROM dbo.Trans
WHERE Sys = @vwSys AND Prin = @vwPrin

ERROR:
Conversion failed when converting the varchar value 'TEN' to data type int.

Any input is welcome, thanks so much.

View 8 Replies View Related

Error Conversion Failed When Converting The Varchar Value

Jan 23, 2008

I have a Condition in my stored procedure

AND tt.RevenueTypeID LIKE CASE WHEN @iRevenueTypeID = -1 THEN '%' ELSE @iRevenueTypeID END



@iRevenueTypeID is declared as VARCHAR(6)

When i am passing 'PRP in the the Stored procedure for iRevenueTypeID

it was working fine till now but now it is giving error as


Conversion failed when converting the varchar value 'PRP' to data type int.


What i am doing wrong?

View 3 Replies View Related

Data Type Conversion .. Varchar To GUID

Jul 31, 2006

Hi,

I have a parameter @name varchar(50)

but the table has a field with datatype GUID

how I can convert varchar to guid before insertion...

Thanks

View 1 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value To Int

Nov 24, 2015

I have written below query.

-- AssignedToTasks 32,'from (Select Distinct wft.*','
OVER(Order by task.TaskId desc)','','where IsActive=1 AND RecurrenceRule is null',0,5
Alter PROCEDURE [dbo].[AssignedToTasks]

@UserId varchar(15)  ,
@selectClause Nvarchar(max),

[Code] ....

View 4 Replies View Related

T-SQL (SS2K8) :: Conversion From Varchar To Strong Data Types

Mar 21, 2013

There are a few databases I work with that have been designed where varchar columns are used to store what actually displays on the front end as Ints, Decimals, Varchars, Datetimes, checkboxes.

I often have to write integrations with these databases bringing data in and prefer to validate the data whilst loading from the staging tables.

I have seen allsorts of values being passed into the staging tables that will load into the target database because the columns are all varchars but the values don't display on the front end because the app actively filters bad values out.

What I would like to do is for my validation scripts to warn up front of potentially invalid datatypes. My problem is that forexample the ISNUMERIC() function return 1 for the value ',1234' but a CONVERT(NUMERIC, ',1234') or CAST(',1234' AS NUMERIC) will fail with a "Error converting data type varchar to numeric).

I've been trying to locate a set of reliable datatype testing functions that will reliably determine if a varchar can be converted to a given data type or not.

View 6 Replies View Related

SQL Server 2012 :: Conversion Failed When Converting Varchar Value

Dec 19, 2013

Within in Visual Studio 2012 solution, I have several projects, one of which is a Database project. I am defining several tables. The one in question is:

CREATE TABLE [dbo].[tblKppHierarchyPcl]
(
[ID] NUMERIC(18,0) NOT NULL,
[Name] VARCHAR(500),
[PartStructureKey] NUMERIC(18,0) NOT NULL,
[PartNumber] VARCHAR(500) NOT NULL,
[ParentPartNumber] VARCHAR(500) NULL,

[code]...

Error SQL72014: .Net SqlClient Data Provider: Msg 245, Level 16, State 1, Line 76 Conversion.failed when converting the varchar value 'Coolant Quick Disconnect' to data type int.So it has a problem with inserting 'Coolant Quick Disconnect' into the Name column. The Name column is CLEARLY a varchar column but somehow it thinks it's an int column.

View 8 Replies View Related

Conversion Failed When Converting The Varchar Value To Data Type Int.

Sep 28, 2006

Table:Student
Name nvarchar(1000)
Status int

In the stored procedure - I have got a string which contains comma separated Status Values such as

DECLARE @validStatus = '1000,1001,1002'

I want to return the count of students having the status code as in @validStatus

SELECT count(1) FROM Student WHERE Status in (@validStatus)

But the above statement is erroring out with

Conversion failed when converting the varchar value '1000,1001,1002' to data type int.

Any help/suggestion appreciated.

Thanks,
Loonysan

View 14 Replies View Related

Conversion Failed When Converting The Varchar Value To Data Type Int.

May 27, 2008

Hi guys,

My query was working fine until I added the yellow highlighted areas below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get

Conversion failed when converting the varchar value 'po_num' to data type int.

Any ideas? Thanks!


SELECT t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

MIN(

CASE

WHEN t8.linestatus = 'O'

THEN t9.docnum

ELSE NULL

END) po_num,

t10.docduedate





FROM

(SELECT t0.product product ,

SUM(

CASE

WHEN t0.qty_topick <> t0.qty_picked

THEN t0.qty_topick - t0.qty_picked

ELSE 0

END) shorted

FROM rbeacon.dbo.shipline2 t0

INNER JOIN rbeacon.dbo.shiphist t1

ON t0.packslip = t1.packslip

WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)

GROUP BY t0.product

) t3

INNER JOIN comparison.dbo.vlgxplc t2

ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS

LEFT JOIN

(SELECT t0.product AS product,

SUM(t0.quantity) AS onhand

FROM rbeacon.dbo.binlocat t0

GROUP BY t0.product

) t4

ON t3.product = t4.product

INNER JOIN wbau.dbo.oitm t5

ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.ocrd t6

ON t5.cardcode = t6.cardcode

INNER JOIN wbau.dbo.oitm t7

ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.por1 t8

ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.opor t9

ON t8.docentry = t9.docentry

LEFT JOIN comparison.dbo.podatetest('po_num') t10

ON t10.docnum = t9.docnum



WHERE t3.shorted <> 0

GROUP BY t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

t6.cardname,

t10.docduedate

ORDER BY t2.u_vlgx_plc,

t6.cardname ,

t3.product

View 14 Replies View Related

Data Access :: Conversion Failed When Converting Varchar Value

Jul 21, 2015

I'm trying to pass a character (D) to an integer data type!i'm getting this error:Conversion failed when converting the varchar value '17D' to data type int.

View 5 Replies View Related

Conversion Datetime

Mar 17, 2008

Hello boyz and girlz,
 
Little question:
I want to write the current date and time into a database with following code:
 
Dim time As DateTime
 
time = DateTime.Now
 
connection.Open()
 
 
cmd.CommandText = "INSERT INTO tblOpmerkingen(Time )values('" + time + "')"
cmd.Connection = connection
 
But: My "time" is DD/MM/YYYY HH/mm/SS
and in my database time = MM/DD/YYYY HH/mm/SS
 
can somebody help me?
thanx

View 6 Replies View Related

Datetime Conversion

Jun 16, 2005

Hi,I tried to convert sql datetime to string (hh:mm:ss), or filetime, but i wasn't successful. Will somebody help me with my problem? I don't know how I can solve my problem really.Thank's

View 6 Replies View Related

Datetime Conversion

Feb 28, 2005

Hello, everyone:

How to convert '173515' to be datetime like "5:33:00 PM". Thanks.

ZYT

View 1 Replies View Related

Datetime Conversion

May 19, 2008

I have in text field (nvarchar) following date dd-mm-yyyy
and i would like to convert it to smalldatetime field
in format yyyy-mm-dd.

Is there any explicit way to do it?

thank you

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved