Hoe To Insert Email Address Into The Database Filed
Feb 13, 2008
i ve a filed named "Email" of datatype .i ve created this field to insert email address in this field.but when i insert an email address like "bilal@yahoo.com" from a textbox wh is in an ASP.net webpage then in the filed i see this "System.Web.UI.WebControls.TextBox".
can u plz tell me how to fix this
Regards
Ahmed Bilal Jan
View 3 Replies
ADVERTISEMENT
Oct 25, 2007
how is it possible to set a filed in a database to automatically add the current time to the filed at run time, is this possible; this filed has already been identified as 'DateTime' .
View 4 Replies
View Related
May 8, 2008
We have an identifier of who has performed an ection which populates a table with their email address in the format firstname.surname@domain. I am looknig for some code to split out the first name and surname (and, if possible, capitalise both) so uor audit report can show the actual name instead of the email address.
Has anyone encountered this issue previously and know a solution?
Many thanks in anticipation.
View 6 Replies
View Related
Dec 9, 2004
Is there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
View 2 Replies
View Related
Mar 12, 2015
I'm trying to strip out the First & Last Name from an Email Address. The email address is formatted as "FirstName.LastName@emailaddress.com" but sometimes a middle initial is used (ex: "First.M.Last@emailaddress.com").
I can locate the '@' sign and the first '.' period(from left to right) but need to find the first '.' from the left of the '@' sign.
I'm doing this in a view.
Here's some sample data and what I've tried:
CREATE TABLE dbo.Table1
(EmailAddr VARCHAR(255))
INSERT INTO dbo.Table1 (EmailAddr)
SELECT 'Andy.Smith@gmaddr.com'
UNION ALL
SELECT 'Betty.Lee-Jones@gmaddr.com'
[Code] .....
View 3 Replies
View Related
May 14, 2008
Hello,
I will like to know the best practice for grouping email addresses in a table.
We have a basic table that has email address for admin users. Which goes thus
CLIENTS EMAIL
emailID int
username: varchar 20
Client_email varchar 150
The Above table is for our admin users. Enabling them to send out emails to clients. Based on their bills.
We have a second table for mass mailing. Which has emails in groups. Each group is based on the above entry. And groups could range from 5 users up to 100,000 users.
Whats the best way to implement this.
Do I create a seperate column for each email entry, knowing that this table would be extremely big, with a lot of repeated values, ie username etc. Or group them TOGETHER as varchar(max)
PLEASE ADVICE, best practices
thanks
Mary
Yes O !
View 1 Replies
View Related
Jan 28, 2014
There is a Table DISPLAY_DETAILS in which a Column - DISPLAY_NAME, which displays data in it as :
Joe Barnard(123456);Paul Johnson(114454); - Display as Name(Employee Id).
There is a EMployee Master Table EMP_MASTER Which contains Employee Id and Email Address Columns.
From this: Joe Barnard(123456);Paul Johnson(114454); I need to get the Email Address for these Employee Ids - 123456 and 114454
View 3 Replies
View Related
Jul 4, 2007
Hi,I have 2 fields in a database: 'email' and 'website'.In the majority of cases, the website field is not populated even though theemail address is. In 90% of cases, the website will be 'www.' followed bywhatever is after the '@' symbol in the email address.Would anyone be able to help me with the SQL that would take whatever isafter the '@' sign in the email address, add it to 'www.' and populate the'website' field?Thanks!
View 3 Replies
View Related
Aug 2, 2007
Hi
do you know incase a script which extracts domain names from an email address?
like foreg. we have xyz@dmc.com or abce@dmc-int.com
should give
dmc and
dmc-int
View 7 Replies
View Related
Feb 12, 2008
hello everone i have a table named "Concerned_Department" in which i ve a filed "Deadline"of type DateTime.i ve another table named "Cat_description" in wh i ve a filed "Max_Days"of type int in wh i ve values 1,2 and 3.in "Cat_Description" table i ve "Cat_ID" as Primary key of type int.all i want is if i select a row from "Cat_description" with "Max_Days"=1, i want to add this 1 to current date and and place it in the "deadline" field of "Concerned_Department" table.like if today is 12/02/2008 then i want to place 13/02/2008 in "Deadline" filed of "Concerned_Deprtment"tablewhen a row with "Max_Days"=1 from "Cat_Description" is selected.i am using SQL SERVER 2005 Exprees and C#(in source behind).regardsAhmed Bilal Jan
View 2 Replies
View Related
Oct 1, 2007
Could this query be made more efficient?
It takes ages to run it. It strips of everything from an email address and keeps only the domain.
SUBSTRING(Mailaddress, CHARINDEX('@', Mailaddress) + 1, CHARINDEX('.', SUBSTRING(Mailaddress, CHARINDEX('@', Mailaddress) + 1, 100)) - 1) AS mail_domain
View 4 Replies
View Related
Nov 30, 2006
this is what i am looking for,
A client with an email address that does not end in uk cannot make a room booking
Any ideas
View 9 Replies
View Related
May 10, 2007
ms sql server
data:
idno Email Category
1 a@a.com c
2 b@b.com c
3 b@b.com c
4 b@b.com c
only unique email address record are requierd.
1 a@a.com c
2 b@b.com c
what could be the query for such requirements.
View 5 Replies
View Related
Apr 11, 2007
(NOTE: FROM a NON-IT PERSON) We've implented SQL 2005 and Reporting Services, but our subscriptions only work internally: when we try to send reports via subscriptions to valid external email addresses, we get a message: invalid email address and the entire subscription does not work.. PLEASE ADVISE. IT WILL BE GREATLY APPRECIATED!
View 1 Replies
View Related
Jun 26, 2007
I would like to use ISS to extract the user name and email address out of the active directory. I would like to put it in an MS-SQL 2005 table that I can use stored procedures on. I am hoping I can use a query to do it but I understand there is a 1000 entry limit on the extraction of the Active Directory and I have more than 1000. Could someone point me in the right direction please. Thanks.
View 1 Replies
View Related
Sep 21, 2015
I just moved our SSRS server from one machine to another. It was sending our report emails from a service account. So when my end users get the emailed report it was from a service account (reports@blah.com) .
Now that I moved the DB to another server - the reports get emailed successfully - but they are being sent from my email address!
I have checked the rsreportserver config file. I also checked in the report server smtp setup and they both show the service account. I even checked the subscription owners and accounts.
SSRS is using my account, but I can't find where it's getting it from. Where else can I look?
View 3 Replies
View Related
Jun 7, 2006
i am trying to insert an auot number field in my table which has got about million rows but sql 2005 is giving me na error "cant insert"
i need to index my table so that the query runs faster when i perform joins on two of such huge tables..
i tryid inserting the identity key the way it was mentioned in the forum but sql doesnt let me do that??
pls help
View 9 Replies
View Related
Aug 15, 2002
how do I set up a SQL2000 server to send an alert to both an email address and a pager when a specific event occurs..please help!!! The server is in a different location and we need notification of problems!! thanks
View 1 Replies
View Related
Mar 11, 2014
i have a situation where is need to get email address from a varchar column. Here is some sample data for five records; The format can be change.
dummy text;
Tel: +44 (0)1234 566788;
Email: bbc@co.uk
Admissions dummy text;
T: +44 (0)1234 4444;
E: xyz@co.uk;
dummy text;
dummy text;
Tel: +123 32323 33;
Email: test@yahoo.com;
dummy text;
t: +88 (0) 115 333 5553;
f: +99 (0) 115 222 8888
e: dummy@gmail.com;
dummy text;
t: +11 (0) 222 222 2222;
e: myemail@test.com;
w:http://www.yahoo.com/faqs;
View 4 Replies
View Related
Oct 30, 2014
I am trying to retrieving all email address using particular domain extension for e.g. gmail.com
I wrote the below query
Select policyid,emailaddress from policyholder
WHERE policyholder.EmailAddress like '%gmail.com%'
It works fine, but i want to use the LIKE condition against ‘emailaddress’ column in email table as I have more than 100 domain extensions
I wrote something like
WHERE policyholder.EmailAddress like (select emailaddress from email) but I am getting the below error
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
View 4 Replies
View Related
Jul 23, 2005
Dear Mr Portas and Mr Sommarskog,Cause I am a newbie in sql, can I ask for your email address?My email Address is Join Bytes!ThanxBest RegardsMichael--Message posted via http://www.sqlmonster.com
View 3 Replies
View Related
May 3, 2008
Hello Everyone,
I am bit confused.
I am using vwd2005 express,c# and sql express.
I have a webform that registers new employee(title,name,age,address,phone,email) and inserts those data into the sqldatabase.
The problem is there might exists 'N' number or email ids and phone nos for a single user.
for eg: user A might have 3 email address where has user B might have 5 email address.
so in that case its not appropriate to create 5 textboxes in the webform and create 5 column like email1,email2,email3,email4,email5 in the database for both users..
i hope your getting the point.
I tried to create a separate table for emails and phone.
But i am new to relational database.
So if i need to use Relational database then could anyone help me here to :-
1.create a table structure here.(what would be the structure of tbl_employee, tbl_email and tbl_phone)
2.How to write insert query if i am using RD here?
plz help explaining the concept with a simple running example.
Thanks in advance.
Jack.
View 8 Replies
View Related
Dec 27, 2005
Hi,
The Browser role has the task Manage Individual Subscriptions. Fine, the user can create a subscription. The problem is that the reportserver populate the email address text box with the Windows User ID and does not let the user change this to put his email address instead. The text box is greyed out.
I found that to enable the text box I have to add the task Manage all subscriptions to the role "Browser".
This is a major security problem because with this setting any user can edit any subscription.
I suspect that I could work at the Active Directory level to populate a field that would in turn populate the email address with the correct data., however this is not an option for me. I have absolutely no way to do it or get it done. Does anybody has an idea on how I could allow a user to edit his email address in his subscriptions and not let him tamper with other users subscriptions?
Thanks
Philippe
View 5 Replies
View Related
Feb 5, 2015
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
View 8 Replies
View Related
Aug 8, 2006
I have subscription by email problem on the following configuration:
Windows XP prof.
SQL Server 2005 Enterprise
Configured Database Mail with remote SMTP server to send email successfully
Configured SSRS to use remote SMTP server
Edited the Rsreportserver.config file as following (by the instructions from MSDN)
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>smtp.broadband.rogers.com</SMTPServer>
<SMTPServerPort>25</SMTPServerPort>
<SMTPAccountName></SMTPAccountName>
<SMTPConnectionTimeout></SMTPConnectionTimeout>
<SMTPServerPickupDirectory></SMTPServerPickupDirectory>
<SMTPUseSSL></SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>0</SMTPAuthenticate>
<From>My email Address</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
I scheduled my subscription and tested it. I didn't receive any mail from the setting email address, but got an error message in ReportServerService log file as following.
Error sending mail, CDO error -2147220978, will not resend
Error sending email. System.Runtime.InteropServices.COMException (0x8004020E): The server rejected the sender address. The server response was: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I did a little search, but couldn't find any solution for it. Is anybody successfully to get the Reporting Services subscription by email function working through MS SQL Server Management Studio or if you have a solution for this issue, would you mind to share the experience with me. I will be very appreciated.
View 5 Replies
View Related
Nov 7, 2007
I have a database called ‘Objects’ which has many field. One of its fields is called ‘Image’ and has a data type image.
I want to add pictures to each one of my records offline, is this possible? i.e. by copying the address from my C drive such as C:Documents and SettingsfseyedarabiMy DocumentsMy Pictures
View 1 Replies
View Related
Oct 30, 2007
I have a database called 'objects' with one of its fields called 'Image' (data type is set to image) and a file in my desk top labelled as 'Pictures' (this is where all my pictures are keep). At run time i want to be able to select and add (upload) my preferred picture to the image filed of different records. Could you please advice me what i should do?
View 9 Replies
View Related
Mar 3, 2008
Hi
everybody.
I am new to VBA,.,, I Have created a folder under inbox in Outlook 2007 which stored the receipients information
like name, E-mail, which is not present in the address book of outlook.
I have imported this folder in access 2007. My problem is ... it does not display the email address.
Rest of the informations is displayed... Is there any way i could do this.??
is there any way i could get the email addresses to appear(import/get) in to the access table???
Is there any module i mite have to create??
Plz help...
thanks a million
View 1 Replies
View Related
Jan 18, 2007
I doubt this is possible, but can someone think of a way to change the email address used for sending report subscriptions based on the report or subscription?
It's a need that I've heard from a number of different clients. Scenario: a company has one reporting services server with reports running from numerous departments. Report subscriptions are sent to internal and external email addresses and there's a business need to use different "from" addresses based on the report (or audience).
View 1 Replies
View Related
Sep 14, 2007
hi
i need to insert the list of ipaddress using stored procedures.
the user will give the from and to range of IP ADDRESS.i've to insert all the possible ip address between those values.
how to do this..
View 3 Replies
View Related
Jul 12, 2007
Hello ALL
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Please help me with the best way to do this
Thanks in advance
View 6 Replies
View Related
Jul 23, 2005
Hi all,I wanted sql server to shoot an email upon insert into a table. I treated atrigger on that table as below.CREATE TRIGGER [emailoninsert] ON [dbo].[table_name]FOR INSERTASexec sp_sendSMTPmail 'user@user.com', 'New records are inserted intable_name table', 'Please investigate and take necessary actions.',@cc='', @BCC = '',@Importance=1,@Attachments='', @HTMLFormat = 0,@From ='notification@sqlserver.com'Is this solution a good method?Thanks,Guju
View 4 Replies
View Related
May 21, 2007
Hi. I found this article on 4GuysFromRolla (http://www.4guysfromrolla.com/webtech/tips/t051706-1.shtml) about sending an email when the database is updated. Well, I need to take this example a bit further. We are allowing people to enter their email address on our site to receive email updates on their case. I have all of that working in the database. But I don't know how to modify their example to loop through a listing of email addresses who want to receive an email when the case has been updated. Does anybody know how I can accomplish this? Thanks for all your help!
View 1 Replies
View Related