I want to just retrieve the numbers left of the space in this address column what can I use? The Address column is Varchar.
Address: 6501 Red Hook Place #201 32 Orchard St 1 Hardy Rd ste 210 379 E Center St. 170 Bridge St 399 Interpace Pkwy 1800 Valley Rd 2210 Harding Hwy 41 Maple Ct
Expected Results:
Address 6501 32 1 379 170 399 1800 2210 41
I tried using this:
Left([ADDRESS], Charindex(' ',[ADDRESS] - 1)) as 'Address'
But i received an error:
Conversion failed when converting the nvarchar value '6501 Red Hook Place #201' to data type int.
Well I am doing a simple insert through a stored procedure..., but I am getting this error. In my table I have the UserID as a VARCHAR 100. I am storing from a textbox that will have number because its there email. But I am not converting anything. Do I need to convert in this scenario?? Server Error in '/pickem' Application.
Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int.Source Error:
Line 113: Line 114: dbConnection.Open Line 115: Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection) Line 116: Line 117: Dim rowsAffected As Integer = 0 Here is the code: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(ConfigurationSettings.AppSettings("connString")) Dim myCommand as New SqlCommand("prcAddTeam", dbConnection) myCommand.CommandType = CommandType.StoredProcedure myCommand.Parameters.Add("@UserID", SqlDbType.Varchar, 100).Value = TRIM(emailBox.Text) myCommand.Parameters.Add("@TeamName", SqlDbType.Varchar, 40).Value = TRIM(teamBox.Text) myCommand.Parameters.Add("@Address1", SqlDbType.Varchar, 50).Value = TRIM(addressBox.Text) myCommand.Parameters.Add("@Address2", SqlDbType.Varchar, 50).Value = TRIM(address2Box.Text) myCommand.Parameters.Add("@City", SqlDbType.Varchar, 50).Value = TRIM(cityBox.Text) myCommand.Parameters.Add("@State", SqlDbType.Varchar, 30).Value = stateList1.SelectedItem.Value myCommand.Parameters.Add("@Zip", SqlDbType.Varchar, 11).Value = TRIM(zipBox.Text) myCommand.Parameters.Add("@FirstName", SqlDbType.Varchar, 50).Value = TRIM(firstNameBox.Text) myCommand.Parameters.Add("@LastName", SqlDbType.Varchar, 50).Value = TRIM(lastnameBox.Text) dbConnection.Open Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection) Dim rowsAffected As Integer = 0 dbConnection.OpenStored procedure:CREATE PROCEDURE prcAddTeam @UserID VARCHAR(100) ,@TeamName VARCHAR(40) ,@Address1 VARCHAR(50) ,@Address2 VARCHAR(50) ,@City VARCHAR(50) ,@State VARCHAR(30) ,@Zip VARCHAR(11) ,@FirstName VARCHAR(50) ,@LastName VARCHAR(50) ASSET NOCOUNT ONDECLARE @ID INTSET @ID = 0SELECT @ID = ISNULL((SELECT UserID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN INSERT INTO tblUserInfo (UserID,TeamName,Address1,Address2,City,State,Zip,FirstName,LastName,CreateDate) VALUES(@UserID,@TeamName,@Address1,@Address2,@City,@State,@Zip,@FirstName,@LastName,GetDate()) SET @ID = @@IDENTITY END
I have a very interesting problem in T-SQL coding for which I can't figure out the solution. Actually there is a Line_1_Address column in our data warehouse address table which is being populated from various sources. Some sources have already concatenated house number + street address fields in the Line_1_Address column whereas one source has separated columns for both data fields.
Now I'm trying to extract data from this data warehouse table and I need to split the house number from street address and load it into separate columns in my destination table. In case there is no data for house number then I should load it as NULL.
The issue is that data in this Line_1_Address column is very inconsistent so I don't know which functions to use. Here is some sample data for your consideration:
Line_1_Address 101 E Commerce ST 120 E Commerce ST 2 Po Box 301 W. Bel Air Ave West Main Street, PO Box 1388
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6 Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
I have subscription by email problem on the following configuration:
Windows XP prof. SQL Server 2005 Enterprise Configured Database Mail with remote SMTP server to send email successfully Configured SSRS to use remote SMTP server
Edited the Rsreportserver.config file as following (by the instructions from MSDN)
I scheduled my subscription and tested it. I didn't receive any mail from the setting email address, but got an error message in ReportServerService log file as following.
Error sending mail, CDO error -2147220978, will not resend Error sending email. System.Runtime.InteropServices.COMException (0x8004020E): The server rejected the sender address. The server response was: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I did a little search, but couldn't find any solution for it. Is anybody successfully to get the Reporting Services subscription by email function working through MS SQL Server Management Studio or if you have a solution for this issue, would you mind to share the experience with me. I will be very appreciated.
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error: [OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
We have an identifier of who has performed an ection which populates a table with their email address in the format firstname.surname@domain. I am looknig for some code to split out the first name and surname (and, if possible, capitalise both) so uor audit report can show the actual name instead of the email address.
Has anyone encountered this issue previously and know a solution?
Is there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
I'm trying to strip out the First & Last Name from an Email Address. The email address is formatted as "FirstName.LastName@emailaddress.com" but sometimes a middle initial is used (ex: "First.M.Last@emailaddress.com").
I can locate the '@' sign and the first '.' period(from left to right) but need to find the first '.' from the left of the '@' sign.
I'm doing this in a view.
Here's some sample data and what I've tried:
CREATE TABLE dbo.Table1 (EmailAddr VARCHAR(255)) INSERT INTO dbo.Table1 (EmailAddr) SELECT 'Andy.Smith@gmaddr.com' UNION ALL SELECT 'Betty.Lee-Jones@gmaddr.com'
Hello, I will like to know the best practice for grouping email addresses in a table.
We have a basic table that has email address for admin users. Which goes thus
CLIENTS EMAIL
emailID int username: varchar 20 Client_email varchar 150
The Above table is for our admin users. Enabling them to send out emails to clients. Based on their bills.
We have a second table for mass mailing. Which has emails in groups. Each group is based on the above entry. And groups could range from 5 users up to 100,000 users.
Whats the best way to implement this.
Do I create a seperate column for each email entry, knowing that this table would be extremely big, with a lot of repeated values, ie username etc. Or group them TOGETHER as varchar(max)
Hi,I have 2 fields in a database: 'email' and 'website'.In the majority of cases, the website field is not populated even though theemail address is. In 90% of cases, the website will be 'www.' followed bywhatever is after the '@' symbol in the email address.Would anyone be able to help me with the SQL that would take whatever isafter the '@' sign in the email address, add it to 'www.' and populate the'website' field?Thanks!
I doubt this is possible, but can someone think of a way to change the email address used for sending report subscriptions based on the report or subscription?
It's a need that I've heard from a number of different clients. Scenario: a company has one reporting services server with reports running from numerous departments. Report subscriptions are sent to internal and external email addresses and there's a business need to use different "from" addresses based on the report (or audience).
i ve a filed named "Email" of datatype .i ve created this field to insert email address in this field.but when i insert an email address like "bilal@yahoo.com" from a textbox wh is in an ASP.net webpage then in the filed i see this "System.Web.UI.WebControls.TextBox". can u plz tell me how to fix this Regards Ahmed Bilal Jan
(NOTE: FROM a NON-IT PERSON) We've implented SQL 2005 and Reporting Services, but our subscriptions only work internally: when we try to send reports via subscriptions to valid external email addresses, we get a message: invalid email address and the entire subscription does not work.. PLEASE ADVISE. IT WILL BE GREATLY APPRECIATED!
I would like to use ISS to extract the user name and email address out of the active directory. I would like to put it in an MS-SQL 2005 table that I can use stored procedures on. I am hoping I can use a query to do it but I understand there is a 1000 entry limit on the extraction of the Active Directory and I have more than 1000. Could someone point me in the right direction please. Thanks.
I just moved our SSRS server from one machine to another. It was sending our report emails from a service account. So when my end users get the emailed report it was from a service account (reports@blah.com) .
Now that I moved the DB to another server - the reports get emailed successfully - but they are being sent from my email address!
I have checked the rsreportserver config file. I also checked in the report server smtp setup and they both show the service account. I even checked the subscription owners and accounts.
SSRS is using my account, but I can't find where it's getting it from. Where else can I look?
how do I set up a SQL2000 server to send an alert to both an email address and a pager when a specific event occurs..please help!!! The server is in a different location and we need notification of problems!! thanks
I am trying to retrieving all email address using particular domain extension for e.g. gmail.com
I wrote the below query
Select policyid,emailaddress from policyholder WHERE policyholder.EmailAddress like '%gmail.com%'
It works fine, but i want to use the LIKE condition against ‘emailaddress’ column in email table as I have more than 100 domain extensions
I wrote something like
WHERE policyholder.EmailAddress like (select emailaddress from email) but I am getting the below error
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Dear Mr Portas and Mr Sommarskog,Cause I am a newbie in sql, can I ask for your email address?My email Address is Join Bytes!ThanxBest RegardsMichael--Message posted via http://www.sqlmonster.com
The Browser role has the task Manage Individual Subscriptions. Fine, the user can create a subscription. The problem is that the reportserver populate the email address text box with the Windows User ID and does not let the user change this to put his email address instead. The text box is greyed out.
I found that to enable the text box I have to add the task Manage all subscriptions to the role "Browser".
This is a major security problem because with this setting any user can edit any subscription.
I suspect that I could work at the Active Directory level to populate a field that would in turn populate the email address with the correct data., however this is not an option for me. I have absolutely no way to do it or get it done. Does anybody has an idea on how I could allow a user to edit his email address in his subscriptions and not let him tamper with other users subscriptions?
I need to have a process extract some data, export it to CSV and then send it as a plain (non-MIME) message, or as a single-part MIME message. Multi-part MIME messages can't be used.
This process will be called about 20 times daily with different subsets of data.
