Hi guys,
now i was able to get the results of the query i made. and the remaining problem now is how can i store the results to my database?
here's the my code:
protected void btnGenerate_Click(object sender, EventArgs e)
{
_con = new SqlConnection(database.evgConnection());
_comm = new SqlCommand("EV_usp_SearchNoticeLocation", _con);
_comm.CommandType = CommandType.StoredProcedure;
_comm.Parameters.AddWithValue("@Locationid", ddlLocation.SelectedValue);
_adapt = new SqlDataAdapter(_comm);
DataSet objDataset = new DataSet();
_adapt.Fill(objDataset);
GridView1.DataSource = objDataset;
GridView1.DataBind();
foreach(DataRow dr in objDataset.Tables[0].Rows)
{
Response.Write(dr["Docownerid"].ToString());
}
}
how can i store all the Docownerid to another database table?
I am wondering if tempdb stores all results tempararily whenever I query a large fact table with over 4 million records which joins another dimension table? Since each time when I run the query, the tempdb grows to nearly 1GB which nearly runs out all the space on my local system drive, as a result the performance totally down. Is there any way to fix this problem? Thanks a lot in advance and I am looking forward to hearing from you shortly for your kind advices.
I'm writing a search engine and I want to make a search and then, after I've recieved the results, put them into some sort of temporary(in mememory) table so that I can do another query on that temporary table.
I saw something about temp tables (in T-SQL) in the help guide, but I still want to know how to do a query on a regular table and then store those results in a temporary table to perform a query on that. Could anyone show me some example or something?
I would like to perform a large query operation (which takes many seconds), and store that into a designated table which will act as basically a cache for that query. Is there a way to achieve this just using SQL, as opposed to using a data reader, then inserting that back into the designated table with a sqlceresultset.
I am looking for an example of a store procedure that will run a existing view and copy the results to a table. Every time it runs the table needs to be truncated. Will run once a day.
My view is a follows
SELECT PClass FROM mydatabase.dbo.ProductClassDes WHERE (ProductClass <> '_RBS') AND (ProductClass <> '_EDT') AND (ProductClass <> '_BMS') AND (ProductClass <> '_PAZ') AND (ProductClass <> '_PBC')
View results need to be copied to a table tblCurrentProductClasses that will only contain one field PClass.
I have a label on my page that shows a persons name, but in the database it is identified by a ID for indexing purposes. When I do a UPDATE (users can change other info on the page...not the name though), I want to update by the ID, not the actual name. Problem is, I don't have the ID (just the name) on the page, so I would have to do a lookup for the ID in the database. Is there a another way to do this? When I select the persons name for display using the SqlDataSource, it's easy to select the ID too. But how can I use this ID on the UPDATE? I don't want to reinvent the wheel.
Can anyone tell me or point me in the direction of how I can store select query results to a variable in VB.NET? Im using the SqlDataSource control with dropdowns and textboxes for searching. I want to store the search results in a variable on the button click event.
In return I need to check column Status for whenever the value has changed and need to store that in my table. If there are two records for which value in column Status is same, I need to pick only one of the records and that being the earliest of them and therefore the Date field is mentioned in my table . My output should be something like below.
I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?
Thanks a lot for any help and guidance in advance.
I cannot create a measure that returns results for dates that do not exist in the fact table despite the fact that the components included in the measure contain valid results for these same dates.Creature a measure that counts the number of days where the "stock qty" is below the "avg monthly sales qty for the last 12 months" (rolling measure).Here is the DAX code I have tried for the measure (note that filter explicitly refers to the date table (called Calendar) and not the fact table):
Below you can see the sub measures (circled in red) are giving results for all days in the calendar.Highlighted in yellow are dates for which the StkOutCnt measure is not returning a result. Having investigated these blank dates, I am pretty confident that they are dates for which there are no transactions in the fact table (weekends, public holidays etc...).why I am getting an "inner join" with my fact table dates despite the fact that this is not requested anywhere in the dax code and that the two sub measures are behaving normally?
with actividades_secundarias as ( select a.*, r.Antigo, r.Novo, rn = row_number() over (PARTITION BY a.nif_antigo, r.novo ORDER BY a.nif_antigo) from ACT_SECUNDARIAS a inner join ((select
[Code] ....
I want to make a delete statement like this:
select * into #table1 from actvidades_secundarias where rn>1 Delete from act_secundarias where act_secundarias.nif_antigo = #table1.nif_antigo and act_secundarias.cod_cae = #table1.cod_cae
I need to analyze the results from Table 1, count how many records there are where one field matches, and then put some of Table 1's information into Table 2 along with the count of the records that match. This is built to interface with another system, so a lot of the information, names, and relationships can't always be changed.
Table 1: tblResourceAllocation Fields (Description):ID (Unique)LastName (Unique alphanumeric string for each employee, but one employee can have multiple records in this table)Project (Unique name, can have multiple entries in this table)Owner (Unique alphanumeric string for each owner, but one owner can have multiple records in this table)ResourceStartDate (datetime)ResourceEndDate (datetime)ServiceID [I](this is what I want to aggregate)Status_FC [I]
Table 2: tblGRFM ID (unique)Pm (the tblResourceAllocation.Owner's actual full name, which I'll look up from an EmployeeData table and concatenate the FirstName and LastName)IdClient (from tblResourceAllocation.Project I will look up the Customer from the Projects table, then look up the Customer ID from the Customers table)US_State_Id (look up State from Projects table then ID from tblStateCodes)Project_name (same as tblResourceAllocation.Project)Status (same as tblResourceAllocation.Status_FC)Id_operlst (same as tblResourceAllocation.ServiceID)Start (earliest start date of relevant entries)end (latest end date of relevant entries)Nb_ress (total number of ResourceAllocation entries that match Id_operlst)Cadence (explanation below)
I need to calculate how many of each serviceID's are in table 1, and then store that calculation and the ServiceID (Id_operlst) in table 2I need to separate those calculations by Owner, IdClient, US_State_Id, and Project_Name I.E. If there are 5 entries in table 1 with ServiceId = X, and Owner A is listed on 2 of them and Owner B is listed on 3, I want it displayed as [Owner A, X, 2] and [Owner B, X, 3] in table 2.
Same goes for the other fields, which obviously adds more complexityWithin those calculations I also need to calculate the Start and end date for table 2. Using the last example, if one entry of Owner A's service X has the early start date and the other entry has the later end date, those dates need to be displayed in the Start and end for table 2 (should I use Rank here?)
I need to create a string of numbers separated by semicolons that shows how many resources are working on a given week after the start date
Example:I have 3 resources on a projectResource 1: 12/31/2012-1/27/2013 (Week 1-4 of our calendar)Resource 2: 1/7/2013-1/27/2013 (Week 2-4)Resource 3: 1/7/2013-1/27/2013 (Week 2-4)tblGRFM.Start will equal 12/31/2012 and tblGRFM.end will equal 1/27/2013Cadence should be equal to "1;3;3;3" to indicate that one resource will be working the project the first week, and three resources will be working the project for the next three weeks.
I have a question. I have a standard query that retrieves the list of users from a database. The query uses "exist" statement and inside it I have another smaller query. The smaller query which used withing exist statement is called numerous times during the query execution. I am wondering if I can speed things up by storing result of a smaller query in a table rather than asking DB to run it again and again. The query takes over a minute to run and I am trying to find a way of speeding it up.
Hello, Folks. I am not sure if this can be done (and a brief search ofthis group didn't yield any results that I thought would do the trick)but if it can be done it would make my life easier so here goes.First, what I am trying to accomplish is to make a program I've writtenautomatically update itself if there is a newer version on the network.Second, my application runs on one or more computers at manygeographically separated locations. I have remote control softwarethat enables me to remotely update and troubleshoot my application butI since I have to pay for this access per computer I don't have theability to control each and every computer that runs my software (forthose clients with more than one computer that uses my software).Third, my application uses as its data storage system MSDE 2000 (withcurrent service pack).Fourth, my users are not technical people and I want to rely on them aslittle as possible.Fifth, not all of the workstations are Internet enabled or connected,so having the application check a website for an update is notfeasible.Finally, to bring those different pieces together, what I want to beable to do is connect to and control the "server" (the computer withMSDE installed on it) and store in the database what the currentversion number is along with the current program files. Then, when theapplication launches, it will check that stored version number againstit's own version number to determine if there is a newer versionavailable. If there is a newer version available I want it to updateitself (that workstation) by retrieving that newer software from thedatabase. I want to avoid file sharing because it's problematic andsince I already have SQL Server (MSDE) running on the network I'd liketo use that.Is there some way that I can either a) store my program files (one EXEapproximately 5MB in size and one OCX approximately 250KB in size) in atable to be retrieved by my application so it can update itself or b) away to get SQL Server (MSDE) to read a file locally on the server andreturn it to my application just like it would any recordset so I couldjust tell it where the file was and let it read it from whicheverfolder it's stored in?I've looked at making a column of datatype Binary, and perhaps that'sthe way I'll go (re-creating the field to the correct size each time Ido an update or perhaps making it really big so I don't have to worryabout the size). But I thought I'd ask around first since this isn'tanything I know much about.Thank you for your time and help.--HC
How can I store more than one category in a products table? For exampe: I have a dvd website where the admin can add new dvd's. On the website all the categories are listed with a checkbox. If the dvd is a action comedy the admin have to check these two checkboxes. But how do I store that in the sql database an retrieve it? Thanks David
I would like to store and read .doc file in a table of sql server using C#. Can some body help me on this? my id is padam76@gmail.com. Thanks & Regard,Padam Kumar Tripathi
Can you store images in a database or in a table, or do you have to only store the image path/name in the database while the image is in another folder? IF anyone knows, please share with me. Thanks.
Hi I am new to SQL programming. This is what I am trying to do in store procedure. Alter a table - adding two columns. Then update those columns Both the above action in same procedure . When I execute them - it complains that the columns I am adding in the first part of store procedure , does not exists. So the SP looks like this create store procedure <name> as alter table <name> ADD column_1 nvarchar (256), column_2 nvarchar (256);
update table set column_1 = <condition> column_2 = <condition>
The SQL complains - invalid column name column_1 invalid column name column_2
One column in my table stores SQL queries(QueryCoulmn). Another coulmn supposed to store the result of those queries(ResultColumn). Can I run an update query or how can I do that? I could not figure out the syntax.
update tablename set ResultColumn=exec(QueryCoulmn)
DECLARE @AssessBenefitID INT DECLARE @ActualQuantity INT DECLARE @ExpectedQuantity INT DECLARE @ActualQuality VARCHAR(2000) DECLARE @ExpectedQuality VARCHAR(2000) DECLARE @AssessFlag CHAR DECLARE CUR_BENEFIT CURSOR FOR SELECT AssessBenefitID,ProjectBenefitID,AssessFlag FROM PMPT_AssessBenefit WHERE ProjectBenefitID=@ProjectBenefitID
OPEN CUR_BENEFIT
FETCH NEXT FROM CUR_BENEFIT INTO @AssessBenefitID,@ProjectBenefitID,@AssessFlag
WHILE @@FETCH_STATUS = 0 BEGIN
SELECT @ActualQuantity=Quantity FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='A' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID SELECT @ExpectedQuantity=Quantity FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='E' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID SELECT @ActualQuality=Quality FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='A' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID SELECT @ExpectedQuality=Quality FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='E' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
In my application, I have a master table that stores information about some other user tables. These other tables are all of different types, that is, the number and type of columns need not match across the user tables.
From the application perspective, logically each of these user tables is nothing but a column field within the master table.
I have seen references about "table" data type in SQL Server. It is possible to create a table that actually has a table data type as its field?
I want to store the contents of an MS Word document (or a brief Word extract) in a database field. This document could contain carriage returns, boldface, etc. I have tried storing the Word doc in fields of type nchar, text, and sql_variant but they do not keep the Word formatting. I found that the "Extended Properties" attribute of a field seems to retain these properties. (Though if I recall right, Extended Properties has a length limitation and is a pain in the #*&_*^! to access)
What is the "right" way to do what I'm trying? Keep in mind that we may want to view this document under either "Query Analyzer" or print a hardcopy version. And we'd like both to be intelligible!
Can any one please tell me where i am going wrong..
Code Snippet create proc SP_PercentageRMU as SELECT cast (sum([Usage Qty]) as [decimal] (28,8))as 'TUsageQty' ,RAW_MATERIAL into #TZMelt_Pound FROM [LatrobeOCT].[dbo].[ZMelt_Pound]
group by RAW_MATERIAL GO select [Usage Qty],(case when r.raw_material = z.raw_material then cast ((r.[usage QTY] / z.TUsageQty) as decimal (28,8)) else 0 end) as '%UsageQty' ,r.[PRODL]
,r.RAW_MATERIAL ,r.[GRADECODE] into #PZMelt_Pound FROM [LatrobeOCT].[dbo].[ZMelt_Pound]r inner join #TZMelt_Pound z on r.raw_material = z.raw_material
I'm quite new to T-SQL and is about to build a small reporting db using SQL. Most of the data I can move with normal INSERT INTO ... SELECT, but there are some tables that I want to produce using T-SQL. For example I want to build a Date table like..
Date Year Quarter Month WeekDay ...
With some precalculated values for each date.
I've searched the forum but have not found any information on how to produce table contents in a good manner. I would appreciate if someone would have the time to point me in the right direction. I do not want to do this by code in my application.
My first thought is to use some kind of Insert Cursor in a While loop...
Pseudo: --------------------- declare cursor ex for 'Insert table ... '
while begin
(produce data) insert data end
close cursor ---------------------
While browsing the net I've got the feeling that you use cursor less in SQL Server than in other db-engines...
