Matrix That Adds A New Column After 5 Rows Are Filled With Data
Nov 22, 2007
Hello,
I have a report in wich I show a list of countries. The length of this list differs each month and comes from a SSAS datasource.
I want to show this list on my report in a matrix like this:
I have one column in a matrix component and it has about 7 items, but the only the items which have values on the page appear at the top of that page.
This is for a labratory so the columns are the different Patient Types and the rows are the different Test Mnemonics. If one of the Patient Types is not used in any of the tests on that page, it doesnt show up. How to I make sure all Patient Types show up on every page?
Campaign and Area are all selectable by parameters, so the actual number of rows is dynamic. What I would like to do is an additional aggregates other then sum for the total - things like average, percent to goal, etc.
And this is where, either I'm completely missing something, or SSRS and I have a huge communication breakdown . I absolutely cannot seem to do this. I tried adding additional columns, but they are grouped under area, not after it - in the above example, it would result in three new columns, one for each area type, not 1. Confusing to describe, but looks something like:
Area1 Area2 Area3 Total Sum Avg Sum Avg Sum Avg CampaignType1 1 xx CampaignType2 2 yy CampaignType3 3 zz Total
I hope that conveys the idea w/o having to fill it all in.
I'm lost as to how to get this accomplished. All I can think of is adding a union dummy row into the actual stored proc to make a different area type (say, AreaAverage) just to add in an additional column and that make sure it sorts at the end. That screams hack to me. Any help????
My stored procedure give me top 3 activities. My SSRS report design, I am able to display first activity when I select the Activity field from the Stored procedure, how to display 3 activities for each category.. Also I need a solution to sort the categories based on the requirement below.
I've got a large table (3mil records) with a number of columns, but currently no way to refer to any individual column. I therefore need a primary key, but does anyone know of a SQL statement I can use that will create a column (say, ID) that is automatically filled with an incrementing 'counter'? Or, instead, how can I set unique incremental values after first creating the column?
Dear Masters; I have a Messages table; I use this table to post System Messages to my users. But what I don't know is how can I add data for multiple users. I mean I want to add same message for multiple users (ex: Please update your infos). In the belove table I have some messages for users 100 and 200; How can I add same (please update your infos) messages to both users? Ex: Messages Table ID UserID Msg 1 100 "Hello" 2 100 "Hi" 3 200 "Hello"
I have this update statement I am trying to use, to update a table. My problem is if there is no data in the select statement, it still adds number to the columns. How can I have this update statement work to put blank value in if there are no counts?
UPDATE T_AXA_BreakDown_Claims SET [Claim Count Conm] = t2.[Claim Count Conm] FROM T_AXA_BreakDown_Claims t1 INNER JOIN (select
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing, ( (Fields!Amount.Value) /Previous(sum(Fields!Amount.Value)) ) )
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category") should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
currently I am facing a complex escenario related with gaps and sequences, but I was trying with diferent cases but I did not get the correct results, I am sure about the use of windows functions. I have a table with the information grouped by PublicationId, Provider, MetricId and Amount by Date, one row by each month, but in some cases these data don't have a sequencial values, for example I have the data for the next sequence:
I need to get the sequence by each month, in this case I need to project the month from February to May (with the last previous value, for this case of January) , this is:
The data for testing are:
DECLARE @PublicationsByUser AS TABLE ( Id INT, PublicationId INT, MetricId INT, ProviderId INT, DateCreated DATE, Amount FLOAT
Hello. I hope to explain myself well - I want to make a matrix with two rows. Lats say my data is this: I hava a list of months and in every month I have a number of pepole and there age. How can I show this in a matrix? It need to be in a matrix since I need the columns to expand acording to the month but I don't know how to create two diffrent rows in my matrix.
This probably has been addressed before but I was unable to get the search to work properly on this site. I am needing a script/way of deleting all rows from a DB with the exception of one record left for each row that has duplicate column data. Example : Row 1 Field1 = 12345 Field2 =xxxxx Field 3=yyyyy Field4=zzzzz etc. Row 2 Field1 = 12345 Field2 =zzzzzz Field 3=xxxxxx Field4=yyyyyy etc. Row3 Field1 = 12345 Field2 =20202 Field 3=11111 Field4=zzzzz etc. Row 4 Field1 = 54321 Field2 =xxxxx Field 3=yyyyy Field4=zzzzz etc. Etc. Etc.
I want to be able to find the duplicates for Field1 and then delete all but 1 of those rows.( I don't care which one I keep just so only one is left.) The data in the other fields may or may not be unique.
I know how to find the duplicates it's just the deleting part I am having problems with. Any help would be much appreciated. Thanks,
Trying to change some of the rows in a table specifically one column. column type is varchar ex. of data current desired $345,434.0 345434.0 (stripping out of $ & commas) 435.0 leave as is general txt leave as is
having trouble updating data in table tried using temp table, but update command make it so it won't see table
ex. piece of code update currency_conversion set currency_varchar = cast (cast (currency_varchar as money)as varchar) select * from currency_conversion where substring (currency_varchar from 1 for 1) = '$' ;
I have a table that has values as follows:PersonID Degree55 MD55 Phd55 RN60 MD60 PhdI need a create a query that will give me output like this:PersonID Degree55 MD, Phd, RN60 MD, PhdAny ideas
1 ,AU-Australia 1,MM-Myanmar 1,NZ-New Zealand 1,PG-Paua New Guinea 1,PH-Phlippines
Note: we are getting source data from sqlserver tables.
I googled and found below way but did't get the output as required
SELECT A.id, a.country, Split.a.value('.', 'VARCHAR(500)') AS String FROM (SELECT id, country , CAST ('<M>' + REPLACE(country, ' ', '</M><M>') + '</M>' AS XML) AS String FROM #t3) AS A CROSS APPLY String.nodes ('/M') AS Split(a);
Hi, I am stumped and was hoping someone could help me out. Any help isappreciated.I have a view that looks sort of like this (but with a lot moreentries of course)UniqueIdentifyierColumn1Column21 9999 1002 9999 2003 9999 300What I want to do is to add a column to the view that will contain alist of the values from column 2 where column 1 is the same.UniqueIdentifyierColumn1Column2Column31 9999100100, 200, 3002 9999200 100, 200, 3003 9999300100, 200, 300
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
Is there a way to build a select statement that will output related rows with different column data per row? I want to return something like:
rowtype| ID | value A | 123 | alpha B | 123 | beta C | 123 | delta A | 124 | some val B | 124 | some val 2 C | 124 | some val 3 etc...
where for each ID, I have 3 rows that are associated with it and with different corresponding values.
I'm thinking that I will have to build a temp table/cursor that will get all the ID data and then loop through it to insert each rowtype data into another temp table.
i.e. each ID iteration will do something like: insert into #someTempTable (rowtype, ID, value) values ('A', 123, 'alpha') insert into #someTempTable (rowtype, ID, value) values ('B', 123, 'beta') insert into #someTempTable (rowtype, ID, value) values ('C', 123, 'delta') etc..
After my loop, I will just do a select * from #someTempTable
Is there a better, more elegant way instead of using two temp tables? I am using MSSQL 2005
I am writing a query where I am identifying different scenarios where data changes between one week and the next. I've set up my result set in the following manner:
PrimaryID Field Changed Previous Value New Value 10003 SKUName SKU12345 SKU56789 10003 LocationId Den123 NYC987 etc...
The key here being that in the initial resultset ID 10003 is represented by one row but indicates two changes, and in the final output those two changes are being represented by two distinct rows. Obviously, I will bring in the previous and new values from a source.
I have a matrix with single row. The no. of column varies and sometimes goes to 10-15. So it goes to next page and while exporting it inserts blank pages when exported to PDF. I need the column width at least 2.5cm. I need to break the matrix to next row instead of it going to next page say after 6th or 8th column. I tried to work with the example given in the site http://blogs.msdn.com/chrishays/archive/2004/07/23/HorizontalTables.aspx by Chris Hays. But it is showing matrix for each Row Group, which doesn't meet my requirement.
I had a work around which worked by putting two matrix one below the other and filtering the columns to be shown in each matrix.
If anybody faced this issue or anybody solved the issue kindy reply which will be very helpful for me.
One more doubt, Can I get the Column number of the matrix?
My requirement is to generate multiple columns dynamically.So I have used Matrix.It working fine.I can able to generate columns dynamically based on dealer.
In Data region region of matrix I have given the results of that column.But it is displying only first record of each column.In need to display all records.Please help me.
1. Is it possible to use the subtotal as a field for calculating values? 2. Can I add another row to the subtotal area, having two subtotal rows?
I need to achieve the following output:
Months 1 2 3 101200 Cust1 2008 50 40
2007 45 45 Subtotal +5 -5 102300 Cust2 2008 70 80
Subtotal 0 0
What I want is to use the subtotal as a variance-field for the two selected years by the user. It could happen that a customer doesn't generate turnover in one year, then the subtotal has to be 0 or 100 or whatever.
If my suggestions aren't applicable then I'd like to know If there is another possibility to display the desired results.
When I run the report, the result set returns say 100 rows for table and a row for each project in Matrix. The header and detail rows of table and matrix are perfectly aligned with each other, however, on the first page the table displays 47 rows and then breaks while the matrix displays 50 and breaks. On the next page the Matrix is three rows shorter. As a result the bottom of each control does not align on any page.
Any ideas what could be going wrong or how to fix this?
I just spent about 30mins searching through the forums for this and saw several posts, but I didn't find a straight answer that seems like it would work for my report. How can I add only 2 data rows to a group (to hide them via the group's visible properties) and keep the rest of the rows outside of the group, but still in the same column (vertical area), as shown:
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
W2k3 server, SQL 2005. @@version = Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
I have my first SSIS package almost working, but I'm having an odd problem and can't find any information to help resolve it.
I'm importing from a flat file (csv) to an existing table (append). I've got a Derived Column transformation in the middle to do some data cleanup. It's all working except for one little problem...
One of the transformations is 'REPLACE([Column 3],"^","; ")', output to a new column. (The input file has a field that uses carets as delimiters between an unknown number of items; I'm changing that to semicolons for easier reading.) Not all rows have data in this column, some will have one item, some will have multiple items.
The REPLACE works except that it fills in repeated data for all the blank rows.
Example:
Incoming data is:
1 Smith,Jane^Jones,Jane
2 Brown,John
3
4 Adams,James^Adams,Jim
5
6 White,Debra
Data inserted into the table is:
1 Smith,Jane; Jones,Jane
2 Brown,John
3 Brown,John
4 Adams,James; Adams,Jim
5 Adams,James; Adams,Jim
6 White,Debra
I've tried to use a Conditional to skip the empty rows, but I can't get that working at all (get syntax errors no matter what I put in).
Any suggestions on how to fix this would be most appreciated!
Hello anyone!!! Can anyone helpme with this pls? I have this data model: there is 4 tables A, B, C and D. The constraints says that a identity row in the table A is the forain key in the table B, and the same row is a forain key in the table C. The table D have two forain keys with the table C and B. C A ++ <-- ++ ++ ++ | | V V ++ <-- ++ ++ ++ D B I need make in a part of a report this: for each row of the table D the report have to print the row of the table C that has found by the constraint and then in the next row the report have to print the row of the table B found by the other constraint. It could looks like this:
C.field1 B.field1 The Problem that I have is that If in the table D are more rows, ie. 3, the report have to crossed sort the next rows such this
C.field1 B.field1 C.field2 B.field2 C.field3 B.field3 In the report with a matrix I have done more or less this, but not exactly that I need to implement. cuz in this way the report returns to me this:
C.field1 C.field2 C.field3 B.field1 B.field2 B.field3 anoter solution that I tried to implement is do this, in a single field write this "Fields!C1.Value & vbCrLf & Fields!B1.Value" but the problem with this is that the fields of the table B are not the same or the same number that in the table C. So this isn't the solution too. So wonderfull developers, anyone have any idea or know how to resolve this? THX!!!
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL] CREATE TABLE [dbo].[PARAMEXAMPLE]( [Entity] [varchar](16) NULL,
