202 test 28/09/2007 09:00:00 240 28/09/2007 13:00:00
The best way to describe is a scheduling system with the StartDate, Duration, EndDate.
I am trying to query for datetime periods which are allocated, eg the table records show from 7am - 10am and 9am - 1pm are allocated.
When I query on StartDate >= 28/09/2007 07:00:00 AND EndDate <= 28/09/2007 13:00:00, record 201 & 202 shows which is correct because they are within query parameters and are allocated.
When I query on StartDate >= 28/09/2007 07:30:00 AND EndDate <= 28/09/2007 13:00:00, record 202 only shows which is correct because record 201 StartDate is before 07:00:00.
But my problem is I require record 201 to show because the time period between 07:00:00 and 09:00:00 is allocated and the query parameter is 07:30:00 which is still between 07:00:00 and 09:00:00.
I have researched where on similar situations, the use of duration is used, but I am unsure on its application to achieve results.
I have also read of other situations where a lookup table should be used, but again I cannot get my head around the application of a lookup table to query the resuults.
Does anyone have any theories, design thoughts or real work solutions they can help me with.
Hello, I am trying to achieve a query results with not much luck. I am struggling the query design of how to construct to get the right results. My table has the following data RoomID Subject StartDate Duration(min) EndDate 201 test 28/09/2007 07:00:00 180 28/09/2007 10:00:00 202 test 28/09/2007 09:00:00 240 28/09/2007 13:00:00
The best way to describe is a scheduling system with the StartDate, Duration, EndDate. I am trying to query for datetime periods which are allocated, eg the table records show from 7am - 10am and 9am - 1pm are allocated. When I query on StartDate >= 28/09/2007 07:00:00 AND EndDate <= 28/09/2007 13:00:00, record 201 & 202 shows which is correct because they are within query parameters and are allocated. When I query on StartDate >= 28/09/2007 07:30:00 AND EndDate <= 28/09/2007 13:00:00, record 202 only shows which is correct because record 201 StartDate is before 07:00:00. But my problem is I require record 201 to show because the time period between 07:00:00 and 09:00:00 is allocated and the query parameter is 07:30:00 which is still between 07:00:00 and 09:00:00. I have researched where on similar situations, the use of duration is used, but I am unsure on its application to achieve results. I have also read of other situations where a lookup table should be used, but again I cannot get my head around the application of alookup table to query the resuults.
Does anyone have any theories, design thoughts or real work solutions they can help me with.
Has anyone heard as to whether Microsoft plans on updating the charting engine for Reporting Services? Right now I find the charting capability rather limited and would like to see richer charting capability. Is this a case where it is better to not wait for this feature as it will be way off into the future before this happens, or better charting features just are not in the scope of Microsoft's plans for Reporting Services. If either case is true then the best solution would be to purchase the full capabilities of Dundas Chart for Reporting Services.
I have a MS SQL database that is used with my Web site. I want to enable simple search capability where one or more words could be entered in a text box and have it search certain columns in my database for occurrences of those words. I've never done this before and so I'm not sure how to get started. Can someone help me begin? Thanks!
I am working on creating charts in Windows Application, client-side report development, and the user requires to have a zoom capability on the chart area. For example zoom a piece of chart as selected by the user and then zoom out. Does anyone know that how can it be achieved? Thanks a lot in advance.
We are thinking of deploying MSDE for a modest traffic Intranet. According to this http://www.microsoft.com/sql/msde/howtobuy/msdeuse.asp 25 concurrent users should be fine.
What exception would we get if the MSDE was not handling the traffic?
What would be the best way to track/log how close we are getting to the 25 user max.
I am looking for a solution to allow users to generate data by selecting tables-->columns-->where clauses on the fly.
I am thinking to maintain relationships, joins, etc., in some configuration tables. Based on the fields selected by the user, I can get these conditions and generate a query, execute and export to excel. Any ideas what is the good way of storing relationships, etc. in configuration table?
Also suggest if there is any good excel add-in to do adhoc reporting. Point me if there is any other ways of doing.
If I have to do it from scratch, i probably use VB.NET.
1) How can I keep my package from running more thatn 1 instance at a time?
I tried changing "MAXCONCURRENT" to "1" in my DTEXEC command in batch file, however, this doesn't limit the # of instances. (If I run the batch file twice, one after the next, I get 2 instances running simultaneously).
2) What "executable files" is this definition referring to?
MAXCONCURRENT is defined as:
"Specifies the number of executable files that the package can run concurrently. The value specified must be either a non-negative integer, or -1. A value of -1 means that SSIS will allow a maximum number of concurrently running executables that is equal to the total number of processors on the computer executing the package, plus two."
I am trying to save my package (using MS Visual Studio) with ProtectionLevel = ServerStorage but it is failing with the following error "failed to apply package protection with error 0xC0014061, the protection level, serverstorage, cannot be used when saving to this destination. The system could not verify that the destination supports secure storage capability...". I am trying to test a scenario on which the package is saved in SQL Server/msdb and schedule the package via SQL Job Agent. Can someone show me how to save a package using serverstorage and schedule it via SQL Job Agent?
-- Get the new Customer Identifier, return as OUTPUT param SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned -- users. IF @FK_UserIDList IS NOT NULL EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record -- Retrieve Address reference into @AddressId -- EXEC spInsertForUserNote -- @FK_UserID, --@NoteID, -- @BeenRead -- @Fax, -- @PKId, -- @AddressId OUTPUT
COMMIT TRANSACTION
-------------------------------------------------- GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1 FROM testsupplierSCNCR I am getting the result of 01/01/2007
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!! -- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on go if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1 if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name FROM... WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
End Sub /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// I executed the code successfully and I got a box which asked for "Enter the query string". I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says. Command(s) completed successfully. What I really need it to do is to display the results of the query. Does anyone know how to do this? declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error. We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1 @Franchise ObjectId , @dtmStart DATETIME , @dtmEnd DATETIME AS BEGIN
SET NOCOUNT ON
SELECT p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec , count(1) "Count" , sum(Amount) "Total" FROM tb_Event t JOIN tb_Prod p ON ( t.ProdId = p.ProdId ) JOIN tb_ACDef a ON ( t.ACDefId = a.ACDefId ) JOIN tb_Curr c ON ( t.CurrId = c.CurrId ) JOIN tb_Event e ON ( t.EventId = e.EventId ) JOIN tb_Setl s ON ( s.BUId = t.BUId and s.SetlD = t.SetlD ) WHERE Fran = @Franchise AND t.CDate >= @dtmStart AND t.CDate <= @dtmEnd AND s.Status = 1 GROUP BY p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
