HI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
Hi Gurus,
Can u help me out in the following two scenario/problems.
1. I want to save the query results (which is generated within execute sql task) to file (which does not exists & should be created at run time). is it possible?
2. Can I define the file name, in Flat File connection Manager, dynamically (by using some variable)?
Your support and help will be appreciated...
regards,
Anas
Table 1
-------
NAME GROUPID
AAA 1
BBB 2
Table 2
-------
NAME GROUPID
CCC 1
DDD 1
EEE 2
Name & GroupID are column names.
I want to query these tables and get a result like that:
AAA CCC
DDD
BBB EEE
-----------
NOT
-----------
AAA CCC
AAA DDD
BBB EEE
Is it possible? If so, how?
Thanks in advance.
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
Good morning,
I'm trying to create a view on SQL Server based on a query that i use on Access. The query returns detailed data from a table based on ID's selected and saved into another table.
the thing is, on access it returns back 5 records<which is a correct output> , while on SQL. its returning only one record. what could be the issue here ?
thank you,
I have the below query which gives me statement to apply the login name, SID and PWD and that I statement I can apply to Dr and secondary server. Incase of failover there will be no connection issue.My query is
SET NOCOUNT ON
SELECT 'EXEC sp_addlogin @loginame = ''' + loginname + ''''
,', @defdb = ''' + dbname + ''''
,', @deflanguage = ''' + language + ''''
[code]....
This query output I wanted in a sqlfile so that I can schedule a batch file or sqlcmd and apply the login detail from the new one inserted in the primary.
I have the select statement below - where I use some external functions - and I would like the result to be saved to another table.After executing the statement I end up with a table containing the following columns:
accountno
d.date_start
d.date_end
TWRR_Month
TWRR_Cum
Normally I would use the command 'INTO TableName' but since the statement is so long I don´t know where to place it.The select statement is as follows:
IF OBJECT_ID('tempdb..#trn') IS NOT NULL
DROP TABLE #trn
IF OBJECT_ID('tempdb..#mv') IS NOT NULL
DROP TABLE #mv
SELECT PTR_sequence as trno, PTR_CLIENTACCOUNTNUMBER as accountno, PTR_DATE as date_trn,
CASE PTR_TAC
WHEN 'BUY' THEN 0
ELSE PTR_LOCALAMT
END as amt_trn
[code]...
Hi,
I want to export/output result of a query to a CSV file using SQL Server 2005. How can i do it ? I just want to do it all using SQL Server 2005 query window without having to use some 3rd Party control or software. Is it possible and how? Is there some SP which can convert the result to a CSV File ?
Thanking you...
Hi All
I am using cursor in my SP, according to my condition I might be getting around 600 records all this records to send to text file, I have tried few option some how I am able to create file and I am geeting only the last record in my output file, I want to know how can I append records into output file(text file), If some one can give me some suggestion that will be great.
Thanks in advance
Regards
Ram
Hi all,
I want to save DBCC's result into a table to execute my statement but I don't know how to, exmple for DBCC OPENTRAN (my database) - how can I put SPID & UID to my variable from this statement?
Thanks in advance
Happy New Year
PTH
In SQL7 Query Analyzer we want the results of a SELECT statement not to be displayed on screen but written to a text file.
We assume that in the tons of sp_ and SET statements there should exist
one where output file can be defined.
Greetings from Mannheim, Germany
Ricardo
i want to save the result of the query to a xml file .when any dml operations done on the table then the whole table must be appeared in the xml format in xml file.("Select * from Table_name").
Can any one help me out.
this must be dont directly .not by using any of the tools.
Suppose in sqlserver express we can do this by using 'bcp' tool.But i dont want that .Plzz Help me out.
Thanks & Regards ,
Anujahnavi S.
anujahanvi
Hi,I need to output result of my query to txt file. So I'm using -oparameter, for example:osql.exe -s (local) -d database1 -U sa -P sa -i 'c:\queryFile.sql' -o'c:\output.txt'But it clears existing output.txt file first and then outputs theresult, while I need to append the result of my query without clearingexisting file content. Is it possible ?
View 1 Replies View RelatedCode snippet that will Execute sql select query and automatically import the results to csv files.
View 6 Replies View Relatedi am creating a log file, and at 1 point I record how many rows are deleted after an update process.. I want to also record which productID are actually deleted... how would I write that?!
Basically I need know how I would get the list, and I am using PRINT command... I need to somehow write a loop that works through the list and PRINTS to the file....
Thanks in advance
hi
i am using sql server 2000.
1. can i save the sql result to an ascii file using tsql commands. i don't want to use the menu option.
2. how can i use parameters in query statements. pls give me some exampls
3.is there any way to get the row numbers along with the query results
thanks & regards
Sam
We can save query output save as CSV file directly from the Query Analyzer window. I have done it at last few year before. Now I need it.Can anyone please give the one example for the same.
Thanks
Amit K Patel
While running query below on SQL Server 2005 (Build 3790: Service Pack 2):
SELECT DISTINCT pkg.PrimaryBarcode
FROM dbo.Package AS pkg (NOLOCK)
JOIN dbo.PackageCycle AS pc (NOLOCK)
ON pkg.PackageKey = pc.PackageKey
WHERE (pkg.BillCycleDateKey >= 20061201) OR
(pkg.BillStatusKey = 1)
I received a partial result set followed by
An error occurred while executing batch. Error message is: Couldn't replace text
I suspect this is a memory issue, but cannot find any reference to this particular msg on the Microsoft forums or the other 3rd party forums. PrimaryBarcode is a varchar(50)
I am not sure where to go from here. I would appreciate any ideas. Thanks in advance.
Cheers,
Mike Byrd
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
View 4 Replies View Related
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'.
which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
I am using SQL server 2005. I have a VIEW that joins several tables. One of the table's column can be added dynamically by the user from a GUI interface. However, after a column is added, it does not show up in the VIEW immediately. It will take a while (I haven't figured out exactly how long) before the extra column shows up as the execution result of the VIEW.
So it seems like SQL server is caching that VIEW's schema. Is there anyway I can make this view always comes back with the latest schema?
Thanks a lot!
Penn
Good morning all,
I created a view that selects the rows of the records from a table that matches where condition.
I need to export the records to excel so I could send it out....
what is the best way to do?
Please tell me detail, I don't know much about SQL 2000, still learning.
Thank you,
Yanoroo
I am trying to export the results of a view from an .adp to an .mdbusing TransferDatabase. The code I am using isDoCmd.TransferDatabase acExport, "Microsoft Access", _"C:\___workWayAheadImplementationXTRA_Samples.md b" _, acTable, "x_loe_vw", "LOE_tbl"When I run this I get an error that states" can't find the object 'x_loe_vw'".Yet it is defined as a view.Any ideas?Thanks,Jerry
View 2 Replies View RelatedI have a view with 2 columns and 2 rows(No 1). I want to show the result with 3 columns in 1 row(No 2).
No1:
The view result :
ID | SubjectID
-- ---------
13279 | 900
13279 | 910
No2:
I want to show that result in this structure :
ID | SubjectID | SubjectID2
-- --------- ----------
13279 | 900 | 910
In SQL 2005 - when I display the results of a View and Copy all rows and columns, the resulting Paste in Excel does not include the column names.
How can I set SQL 2005 so the names of the columns will come along with the content of the copy function?
Background:
When I am using a SQL Query (instead of a view) I have the ability to control whether or not I am able to Include the Column Headers when copying or saving results. The control exists in the Options > Query Results > Results to Grid > Include column headings etc.
My question is how to get this same ability when attempting to copy the results of a VIEW vs. a Query.
Thank you,
Poppa Mike
I'm using a subquery to return a delivery charge line as a column in the result set. I want to see this delivery charge only on the first line of the results for each contract. Code and results are below.
declare @start smalldatetime
declare @end smalldatetime
set @start = '2015-03-22 00:00' -- this should be a Sunday
set @end = '2015-03-28 23:59' -- this should be the following Saturday
select di.dticket [Contract], di.ddate [Delivered], di.item [Fleet_No], di.descr [Description], dd.min_chg [Delivery_Chg], dd.last_invc_date [Delivery_Invoiced],
[code]....
In this example, I only want to see the delivery charge of 125.00 for the first line of contract HU004377. For simplicity I have only shown the lines for 1 contract here, but there would normally be many different contracts with varying numbers of lines, and I only want to see the delivery charge once for each contract.
help strange result whan i do this
Code Snippet
SELECT unit_date, unit, ISNULL(NULLIF ((unit + DATEDIFF(mm, GETDATE(), unit_date)) % 4, 0), 4) AS new_unit
FROM dbo.empList
i try to get next unit value to next month
why i get this -1
on date
01/01/2008
1
-1
unit_date unit new_unit
01/02/2008
2
1
01/02/2008
1
4
01/01/2008
1
-1
01/02/2008
1
4
21/01/2008
1
-1
21/01/2008
1
-1
01/02/2008
1
4
TNX
Is there a way to save a result set directly to a text file?
Thanks!
Hi all,
In case i have a script file containt tables, functions, ... when i use Query Analyzer to run this file, the result output in a window. Now i want this result output to a file named logfile.txt. How can i do that?
Thanks first.
hello!
can somebody tell me how i can redirect the result of my
select statement to a file.
thank's
Want to save the result of a query in sql server express to a text file or any other file.
anujahanvi