I have a Data Flow Task using in SQL command in Data Reader Source to extracte data. The data reader source is connected by OLD DB connnection manager. The OLD DB connnection is by non-window-administrator window account
Then I use the same connection manager to connect a SQL Server Destination to refer to a table in the same database.
I use the SQL Server destination to accept the SQL result set from the Data Reader Source.
When I execute the SSIS in server with a, it said a field in SQL Server Destination is read-only. The field is not identity field and task failed.
It is strange that the SSIS work fine if I replace the SQL Server Destination by OLD DB Destination.
If I use the server administrator window account to run the SSIS, it works fine.
I have granted the "bulkadmin" right to the non-window-administrator window account.
I have another SSIS with SSIS bulk insert task to upload text file also works fine with non-window-administrator window account.
I would like to use SQL Server Destination because of better performance.
Could you tell me any configuration is essential for using SQL Server Destination?
I have a package that does simple exporting from an excel sheet to a table. I used a Dataflow task with Excel Source and OLEDB Destination Components. And i created Package configurations for Source and Destination Components. After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
Hi, Im developing an application in Visual Web Developer with an MS SQL Server Database. I have Visual Web Developer Express edition installed on my machine and i had MS SQL Server 2005 Express Edition and everything was fine. However i need to use SQL Server Agent to develop a job and this is not included in the express Edition of Ms SQL Server 2005 Express Edition. So i installed the 2005 developer edition of MS SQL Server. Now Im currently getting the following error when i access the security page in the ASP.Net Configuration page
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Below is what I have put into an execute sql task container. When I try to run it I have output open and have posted the output. The code runs fine when I have the configuration database set up to only check one server. However, when I add anymore to it, the package will get the security from the first db and then error out. Below is the error output and script. Any help with my problem is greatly appreciated.
DECLARE DBName_Cursor CURSOR FOR select name from master.dbo.sysdatabases where name not in ('mssecurity','tempdb') Order by name
OPEN DBName_Cursor
FETCH NEXT FROM DBName_Cursor INTO @dbname
WHILE @@FETCH_STATUS = 0 BEGIN Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin, db_securityadmin, db_ddladmin, db_datareader, db_datawriter, db_denydatareader, db_denydatawriter ) SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ ' Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner, Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin , Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin, Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin, Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader, Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter, Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader, Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter from ( select b.name as USERName, c.name as RoleName from ' + @dbName+'.dbo.sysmembers a '+char(13)+ ' join '+ @dbName+'.dbo.sysusers b '+char(13)+ ' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c on a.groupuid = c.uid )s Group by USERName order by UserName'
[Execute SQL Task] Error: Executing the query "declare @dbname varchar(200) declare @mSql1 varchar(8000) DECLARE DBName_Cursor CURSOR FOR select name from master.dbo.sysdatabases where name not in ('mssecurity','tempdb') Order by name OPEN DBName_Cursor FETCH NEXT FROM DBName_Cursor INTO @dbname WHILE @@FETCH_STATUS = 0 BEGIN Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin, db_securityadmin, db_ddladmin, db_datareader, db_datawriter, db_denydatareader, db_denydatawriter ) SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ ' Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner, Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin , Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin, Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin, Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader, Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter, Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader, Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter from ( select b.name as USERName, c.name as RoleName from ' + @dbName+'.dbo.sysmembers a '+char(13)+ ' join '+ @dbName+'.dbo.sysusers b '+char(13)+ ' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c on a.groupuid = c.uid )s Group by USERName order by UserName' --Print @mSql1 Execute (@mSql1) FETCH NEXT FROM DBName_Cursor INTO @dbname END CLOSE DBName_Cursor DEALLOCATE DBName_Cursor " failed with the following error: "Line 15: Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
We have a project that is in a server with windows 2000 (SQL Server 2005 and .Net 2005) And the other developer has a windows XP machine ( .Net 2005) , We are using the VSSC for the project , when the other developer run the application , the following error is show :
Server Error in '/XXX' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load type 'XXXSecurity.RoleSql'.
Source Error:
Line 27: <roleManager enabled="true" defaultProvider="SqlRoleManager" cacheRolesInCookie="true" cookieTimeout="30" cookieRequireSSL="false" createPersistentCookie="true"> Line 28: <providers> Line 29: <add name="SqlRoleManager" type="XXXSecurity.RoleSql" connectionStringName="MySqlConnection" applicationName="XXX"/> Line 30: </providers> Line 31: </roleManager>
Source File: C:Documents and SettingsYYYYMy DocumentsVisual Studio 2005ProjectsXXXRRRRKKKKKweb.config Line: 29
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
USE [ETLConfiguration] GO /****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[SSIS Configurations]( [ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL, [PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL ) ON [PRIMARY]
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Can anybody tell me the advantage and disadvantage to use NT security for SQL Server 7.0? For a corporation with 400 users, what is your recommendation for the SQL Server security management. Thanks.
[SQL Server Destination [16]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
I'm trying to do a simple upload to a production server from an Access mdb of the kind I used to do routinely in DTS. Any ideas?
Hi, I have created a data flow with 2 target components ( SQL Server destination ) I ran the package and everything went fine. Unfortunatelly when I changed TransactionOption in the package properties to Required. It got stuck in the very beggining. The service DTC is working. Does someone know why I can't load 2 targets in one transaction ?
I want to schedule a job which pulls files from a non SQL server (Sybase) which later needs to have a step 2 kicking the ssis package. Problem is that, on the source a batch file will run every 4 hours and outputs total of 10 text files. (takes 5 minutes complete). Now, on destination i want to pull these files via SQL job but while scheduling;
1. I don't see any option saying like 4 hours 10 minutes or so 2. If its out there, then i believe this might be a problem as this time would be an increment one e.g next run would be 4 hours 20 minutes in that case.
How should i achieve pulling these files up because we have an SSIS package on destination that needs those text files to be used as soon as they arrive on SQL server(destination)
An SSIS package to transfer data from a DB instance on SQL Server 2005 to SQL Server 2000 is extremely slow. The package uses an OLEDB Source to OLEDB Destination for data transfer which is basically one table from sql server 2005 to sql server 2000. The job takes 5 minutes to transfer about 400 rows at night when there is very little activity on the server. During the day the job almost always times out.
On SQL Server 200 instances the job ran in minutes in the old 2000 package.
Is there an alternative to this. Tranfer Objects task does not work as there is apparently a defect according to Microsoft. Please let me know if there is any other option other than using a Execute 2000 package task or using an ActiveX Script to read records from one source and to insert them into the destination source, which I am not certain how long it might take and how viable will that be?
I am replacing a server so I need to migrate everything. The old server is running SQL2000 and the new server is running SQL2005. I am trying to write an SSIS solution to migrate everything for me and I can't even get started because I get the error "The source server can not be the same as the destination server". At the same time I am changing the name of the Domain so the two machines arenot even members of the same Domain. I am doing this over the Internet so the machines are not even on the same subnet. The only thing I can think of is that the machine names are the same so even though the domains are different therefore the full names are different, the NetBIOS names are the same. Could that be the problem?
I get an error when I try to use a SQL Server Destination. I want to use this because its performance, before I've used OLE DB Destination. The idea is that I put data from a table or SQL statement and that I put that in a table using SQL Server Destination. Now the SQL server stands on different server then where my SSIS is saved. I'm not using my windows credentials ( safety reasons ). The message I get is standing below:
[SQL Server Destination [905]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
I was using OLE DB DESTINATION and after going to Sql Server Destination task:
[SQL Server Destination [11259]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
I am getting the following error on a FuzzyLookup transformation. I have 1,000 rows in the source table and 331,580 rows in the reference table. Both tables are in the same SQL2005 db on my local machine. Any ideas?
[SQL Server Destination [733]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
Im using the SQL Server destination object to load some data (about 10gb) into a table. However I would like to use a variable to define what table I load into. All the tables have the same structure. I dont see a way to bind a configuration to it, or to use a variable as the loading table name.
Is there anyway to dynamically change the Sql Server Destination? Let's imagine i want the data to go to a table based on a specific parameter like year for example...
Imagine tables like table1_2005, table1_2006 and i want to dinamically change the SQL Server Destination so it would insert 2005 or 2006 and so on....
I can't seem to find that option... It was really a good idea for microsoft to implement Expressions in such components... Dynamics it's all about it :)
I have a SSIS package that transfers data from three SQL Server 7 servers to a SQL Server 2005 database. This package has about 30 different tables it copies. The table structures in the source database and destination tables are identical. About 25 different tables load without any issues. I have about 5 tables that load some nights without a problem. On other nights, the data transfers seem to randomly (though usually the most recent records) ignore some of the data. I have logging turned on and receive no errors. It just appears to stop loading data.
I should also mention that I truncate each destination table before begining and each table is loaded from data from each of the 13 source database (I am combining data from 13 regional database for reporting purposes). This is done using a Foreach Loop Container that updates the Server/Region connection string for each region. I am using the OLE DB Source connection to the SQL Server Destination. I have tried as well with the OLE DB Destination with the same result (and no error). I do not do any manipulation to the data on the transfer, but added a "RowCount" transformation between the source and destination and it gives the correct number of rows, but not all the rows get loaded.
I'm in the process of running some tests to determine which method is faster...
I created a data flow task OleDB Source -> Data Conversion -> OleDb Destination. Error outputs from the OleDB destination is sent to a flat file destination. This works great.
I'm importing millons of rows and found that using SQL Server Destination (local) is much faster than the OleDB Destination. However, I have not figured out how to output errors to a flat file destination like I did when using the OleDB destination.
Is there any way to trap errors in a flat file when using a SQL Server Destination?
I have conditional split on a boolean variable, when the value is true, case1 output goes to Oledb Destination, defaukt Output goes to Sql Server Destination.
When I run the package with value "true" the package runs, but when i run the package with bool value "false", the data is inserted through oledb but Sql Server destination fails.
Can any one tell me Why.
[SQL Server Destination [292]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
