I have a sql select query that I'm pulling from a "Years" table to link to 3 columns in an Items table.
ZCValuesYear table has two colums: YearID and Year
YearID Year
1 2004
2 2005
3 2006
4 2007
5 2008
...
I want to bind the "Year" value to the three colums in the ZCItem table:
ItemUseFirstYearID
ItemUseLastYearID
ItemYearID
The query below will pull all the "ID's" for each of the colums, but how would I make it pull the "Year" value (instead of record 4, it would pull 2007 instead)?
FROM ZCPartVault
FULL OUTER JOIN ZCItem ON ZCPartVault.PartVaultItemID = ZCItem.ItemID FULL OUTER JOIN ZCValuesYear ON ZCItem.ItemUseLastYearID = ZCValuesYear.YearID AND ZCItem.ItemUseFirstYearID = ZCValuesYear.YearID AND ZCItem.ItemYearID = ZCValuesYear.YearID" >
</asp:SqlDataSource>
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car where Price=@Price1 or Price=@price2 or Price=@price=3 and where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3 and where Model=@Model1 or Model=@Model2 or Model=@Model3 and where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
This is probably the wrong category to post my question in. Apologies if it is.
I have got a Data Flow Task that has an OLE DB Source and a Flat file destination.
Is there a way to do the following:
SELECT id,'31809','C:LCImportDataImages' & id & '.jpg', '1' FROM table1
This obviously doesn't work but I want to insert the id from the table, followed by the value '31809', followed by 'C:LCImportDataImagesid.jpg', followed by '1'
So, the id in 'C:LCImportDataImagesid.jpg' is the same as the id from the table.
Hi, I have a question regarding how to insert one column values into a table by selecting from different table..Here is the syntax.. ------------ insert into propertytable values (select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE', 13926, 0, 4, 1, 451, 1, 8, 1)
the first column in the propertytable will be... select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE' How do I do that..Help PLZ..
Please be easy on me...I haven't touched SQL for a year. Why given;
Code Snippet USE [Patients] GO /****** Object: Table [dbo].[Patients] Script Date: 08/31/2007 22:09:29 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[Patients]( [PID] [int] IDENTITY(1,1) NOT NULL, [ID] [varchar](50) NULL, [FirstName] [nvarchar](50) NULL, [LastName] [nvarchar](50) NULL, [DOB] [datetime] NULL, CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED ( [PID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO SET ANSI_PADDING OFF
Hi, I am trying to insert multiple values from another table as well as an addition value defined by me. Here's my code which is obviously incorrect at the AND statement: Insert Into table_1 (ID, Col_1, Col_2)Select ID, Col_A, Col_B From table_A AND table1.Col_3 = 'XYZ' Where table_A.Col_A IS NOT NULL
Pls advise on the correct way of constructing this statement. Many Thanks
I am converting a site from asp to .net and the previus writer did something I never saw.(I am somewhat new to programming all together). He put multiple values in a single cell of the database. I have always learned to use a seperate column for each value. Is this a classic asp thing and there are better ways now? Or is this something I should do myself? The columns type is text and the contents look like this:<Details Expertise="bla bla" Description="We are a three-divisional company ...," WebSite="www.blabla.com" AccountLevel="Free" AccountStatus="Active" WorkHomeZIP="22222" ContractStartDate="01/01/2003" ContractEndDate="12/31/2003"><Address Location="Work" State="Oh" ZIP="22222"/><Email Location="Work" Value=""/><Phone Location="Fax" Code="9801" Ext=""/></Details>
Hi, We Have Been Trying To Convert Some Pf The Procs Into Functions Of Late,but There Is A Problem :-we Have Been Unable To Return More Than 1 Table Value From A Function.
Create Function F_clusters() Returns @ki Table(names Nvarchar(200),total Int), As Begin Insert @ki Select Names,count(distinct Chremail) As From Customer Where Chremail Is Not Null Return End
This Works Fine :- And Gives The Reqd. Results.
But,
If I Am Using The Same Function To Return Two Tables Then It Doesn't Work,could You Pls Chk.
Create Function F_clusters() Returns @ki Table(names Nvarchar(200),total Int),@k2 Table(names Nvarchar(200),total Int) As Begin Declare @cnt Int Set @cnt = 1 While @cnt <= 2 If @cnt =1 Begin Insert @ki Select Names,count(distinct Chremail) As From Customer Where Chremail Is Not Null Set @cnt = @cnt + 1 End If @cnt =2 Begin Insert @k2 Select @naamre,count(distinct(a.intcustomerid)) As Pura_ginti From Trcustomerpreference03july A Inner Join Cleancustomer B On A.intcustomerid = B.intcustomerid Where Chremail <> ' ' And Chremail Is Not Null And Intpreferenceid In (6,7,2,3,12,10) Set @cnt2 = @cnt2 + 1 End End Return End
Can We Return Two Tables Or Is It Not Possible ? Pls Chk Into This And Tell Me.
I've been working as web dev for quite sometime now but there are still few things that i would like to clarify. Hope you guys can shed lights.
I currently have several tables and all this tables are having some 1 to many relationships. I know that how i insert value into my tables are very inefficient. I do it in this manner.. -> Insert a value in TableA -> Query the latest ID that i have inserted in Table A then -> Insert this value in TableB. And so on and so forth.
I believe there is an efficient way to to do this but i'm not sure how? Could anyone shed me a light on this matter?
I have to select several field values from a table and need to assign them to different variables in my SP.Here's what I do now: declare @ReceiverEmail nvarchar(50) SET @ReceiverEmail=(SELECT Email FROM Users WHERE UserCode=@UserCodeOwner) declare @UsernameSender nvarchar(50) SET @UsernameSender=(SELECT Username FROM Users WHERE UserCode=@UserCodeOwner)As you can see I have to search the Users table twice: once for the Email and a second time for the Username...and all that based on the SAME usercode...:SSo, is there an option where I only have to search the table once and return the Email and UserName fields and assign them to my variables (without using a temp table....)?
Hey all,I am having some serious trouble getting the correct syntax for a select statement to work the way I need it, any help I could get on this would be greatly appreciated.I have a table called Units which stores computers and a table called Software which stores software. I have a bit field in Units called OEM, when this is set to true I don't want the select statement to pull this unit down when I am assigning software to other units.Here is my select statement: SELECT Software.SID, Software.SN, Software.Name, Users.First + ' ' + Users.Last AS 'Assigned User', Units.Make + '-' + Units.Model AS 'Assigned Unit' FROM dbo.Software LEFT JOIN dbo.Units ON Software.SN = Units.SN LEFT JOIN dbo.Users ON Units.UID = Users.UID WHERE (Units.OEM = 'FALSE') AND (Software.SN LIKE '%' + @SearchString + '%')Everything works as expected, unless of course the unit has no software assigned to it yet, it won't return it because its not tied to a Units.OEM field. Is there anyway to have it return ALL records that even arn't joined OR are joined but have OEM set to false?Thanks, let me know if I need to clear anything up.-Matthew
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT. I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId". What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display. Sample: ProjectId - SiteId 1 - 5 1 - 9 1 - 16 1 - 18 1 - 20 1 - 27 1 - 31 ProjectId stays the same, only values for SiteId are being different. I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
I want to produce some output for Mainframe application. For that I want to insert values from multiple table as source to a single column (huge in size)of a different table (Destination table). There may be same related records in all of the source tables with the primary key. When I export values from the source tables , each related records should be insterted to the destination table's field (multiple entries for each table). Please advise.
I know how to check for a sinle vlaue but how do I chekc to see if multiple values exist. I need to check for certain email addresses from a list that I have.
Let us say I ahve 3 email addresses, I want to check for all of them in a table and for eevery email address that is present I want to print something like "You email address is XXX" and if one of those 3 is not found my results should look like
"You email address is XXX" YYYYY not found "You email address is ZZZZ"
I'm attaching some TSQL that I tried on [AdventureWorks2012].[Person].[EmailAddress]
/****** Select ALL if where an email address is present in the list ******/ SELECT EmailAddressID,EmailAddress FROM [AdventureWorks2012].[Person].[EmailAddress] WHERE EmailAddress IN ( 'ken0@adventure-works.com', --1 'terri0@adventure-works.com', --2
[Code] ....
-- Test to see if a single email address is present
IF EXISTS ( SELECT EmailAddress FROM [AdventureWorks2012].[Person].[EmailAddress] WHERE EmailAddress IN ('25rob0@adventure-works.com') ) BEGIN SELECT 'Email address is presnt'
[Code] ....
When I check multiples using EXISTS it works as per its design and says YES even if a single item is present.
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16. Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100); DECLARE @Total NVARCHAR(100); SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total) FROM [Totals]
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT) INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT) INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H SET CHANNEL1= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=1 -- updates only channel1 UPDATE H SET CHANNEL2= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=2 -- updates only channel2 SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1 SET FeeInvalid = 'Y' FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID WHERE t1.CustID = t2.CustID AND t2.OrderDate > t1.OrderDate AND t2.FeeDate > t1.CancelledDate CREATE TABLE [dbo].[MockData]( [OrderID] [float] NULL,
I have to write a master detail query, in which the detail record shouldbe stored in a variable as Comma Seperated Values. Can anyone helpme......Sun*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I have a stored procedure that allows users to select addresses based on partially supplied information from the user. My procedure seems to work fine in all but a few cases. If a user decides to select all the rows for a particular country the procedure below does not return any rows even if the rows exist. I tracked this down to the fact that for Non US countries I set both the StateCode and Country Code to nulls. . Below is a partial version of my code. Can anyone show me how I can do a "Like" Search even if some of the fields in the row contain null values? Thanks 1 CREATE PROCEDURE dbo.Addresses_Like( @SendTo VarChar(50) = Null 2 , @AddressLine1 VarChar(50) = Null 3 , @AddressLine2 VarChar(50) = Null 4 , @City VarChar(50) = Null 5 , @StateCode VarChar(2) = Null 6 , @ZipCode VarChar(10) = Null 7 , @CountryCode VarChar(2) = Null) 8 9 10 Declare @SearchSendTo VarChar(50) 11 Declare @SearchAddressLine1 VarChar(50) 12 Declare @SearchAddressLine2 VarChar(50) 13 Declare @SearchCity VarChar(50) 14 Declare @SearchStateCode VarChar(2) 15 Declare @SearchZipCode VarChar(10) 16 Declare @SearchCountryCode VarChar(2) 17 18 If (@SendTo Is Null) 19 Set @SearchSendTo = "" 20 Else 21 Set @SearchSendTo = @SendTo 22 23 If (@AddressLine1 Is Null) 24 Set @SearchAddressLine1 = "" 25 Else 26 Set @SearchAddressLine1 = @AddressLine1 27 28 If (@AddressLine2 Is Null) 29 Set @SearchAddressLine2 = "" 30 Else 31 Set @SearchAddressLine2 = @AddressLine2 32 33 If (@City Is Null) 34 Set @SearchCity = "" 35 Else 36 Set @SearchCity = @City 37 38 If (@StateCode Is Null) 39 Set @SearchStateCode = "" 40 Else 41 Set @SearchStateCode = @StateCode 42 43 If (@ZipCode Is Null) 44 Set @SearchZipCode = "" 45 Else 46 Set @SearchZipCode = @ZipCode 47 48 If (@CountryCode Is Null) 49 Set @SearchCountryCode = "" 50 Else 51 Set @SearchCountryCode = @CountryCode 52 53 54 Select AddressID 55 , SendTo 56 , AddressLine1 57 , AddressLine2 58 , City 59 , StateCode 60 , ZipCode 61 , CountryCode 62 , RowVersion 63 , LastChangedDateTime 64 , OperID 65 From Addresses 66 Where SendTo Like RTrim(LTrim(@SearchSendTo)) + "%" 67 And AddressLine1 Like RTrim(LTrim(@SearchAddressLine1)) + "%" 68 And AddressLine2 Like RTrim(LTrim(@SearchAddressLine2)) + "%" 69 And City Like RTrim(LTrim(@SearchCity)) + "%" 70 And StateCode Like RTrim(LTrim(@SearchStateCode)) + "%" 71 And ZipCode Like RTrim(LTrim(@SearchZipCode)) + "%" 72 And CountryCode Like RTrim(LTrim(@SearchCountryCode)) + "%" 73 Order By CountryCode, City, AddressLine1, AddressLine2, SendTo
I want to check if the tbaddress.address1 tbaddress_address1 if it is =null or empty then make it = tbaddress.address2 tbaddress_address2, at the same time I make the tbaddress.address2 tbaddress_address2, null. Otherwise leave it as it is.
Actually, I am working with the report and the tbaddress.address1 carrying the apt number. if there is no aprt # then the line print blanks. so that brings the empty line between the street address and the citystate line. That is what i am tryig to cover. There could be a way to do this from the crystal report but I am thinking of doing this way cause I can't get the solution to do it from the crystal report.
Select a.uid , a.name , mewp.data As Association from Asset a Join wshhistory wsh on a.uid = wsh.assetid Join worksheet w on wsh.wshid = w.uid left join
[code]...
When I return the data how do I eliminate the name's that are in bold but keep the association record as this is a relationship between joining tables..
Hi,I have a message system, where people insert their message to the database, and others pick up their messages by selecting messages that have their username as the reciever ID.I have just intoduced bulk message sending - sending to multiple users. This requires many usernames being entered into the recievername column, seperated by a comma.Is there a way to select messages if the column name contains their username, rather than is their username? Because there may be more than one name, I would like everyone that has their name in the column to be able to retrieve the message, even if they arent the only reciever..Please ask if more explanation is needed!Thanks,Jon
I need to do a SQL query based on the two biggest values of a field. PLS , what s the SQL syntax : select * from Table where PRICE ......Ex: if the values of the field PRICE are : 50, 40, 100, 30 and 150.The request should select the rows that have Price equal 100 or 120Thanks a lot for help
I am editing a pre-existing view.This view is already bringing data from 40+ tables so I am to modify itwithout screwing with anything else that is already in there.I need to (left) join it with a new table that lists deposits and thedates they are due. What I need is to print, for each record in theview, the due date for the next deposit due and the total of allpayments that they will have made by the next due date.So this is how things are. I join the table and it obviously bringsmultiple records for each record (one for each matching one in the newtable). I need, instead, to be able to make out what due date I shouldprint (the first one that is GETDATE()?) and the total of deposits upto that date.Now, payments can be either dollar amounts or percentages of anotheramount in the view. So if it's an amount I add it, if it's a % Icalculate the amount and add it.Example:for group X of clients...Deposit 1 due on oct 1: $20Deposit 2 due on oct 15: $30Deposit 3 due on nov 15: $40Deposit 4 due on nov 30: $50for group Y of clients...Deposit 1 due on Oct 30: $200Deposit 2 due on Nov 30: $300Deposit 3 due on Dec 30: $400So when if I execute the view today (Nov 7th) each client from group Xshould have:Next Due Date: nov 15. Total: $90 (deposit 1 + deposit 2 + deposit 3)Group Y should have:Next Due Date: Nov 30, total: $500 (Deposit 1 + deposit 2)And so on.
Hi, i have something like this: SELECT a.boardname, a.description, a.threadcount, a.answercount, a.lastthreadid, b.username, b.subject, b.created FROM forum_board AS a, forum_topics AS b WHERE (a.forumid = @ID) AND (b.id = a.lastthreadid) The problem here is that lastthreadid does not always have a post linked to it, so sometimes its null. I want it to still return all the boards and then just returnnull values or "" in b.username, b.subject, b.createdThis returns nothing. How can i force it to select these values?
