I can establish the mirror with the principal and mirror but cannot add the witness (error 1456) all machines are SQL Server 2005 standard edition service pack 2 principal and mirror are windows server 2003 and witness is windows xp
View 20 Replies
After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.
The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.
ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'
After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.
The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.
Any idea's why the state between Mirror and Witness Connection remains Disconnected?
Thanks,
I am using SQl Server 2012 Database Mirroring with around 40 gb as mdf and 1 gb as ldf. Now my ldf size increased . How to reduce ldf size while mirror enabled with mirror server and witness server. Can shrink the ldf with mirror enables.
View 4 Replies View RelatedHello,
the Mirror Server is not connected to the Witness Server.
Mirror Server and Wtiness Server are instances on one server.
I get this error:
"
2007-06-28 17:08:12.77 spid23s The server instance Witness rejected configure request; read its error log file for more information. The reason 1451, and state 3, can be of use for diagnostics by Microsoft. This is a transient error hence retrying the request is likely to succeed. Correct the cause if any and retry."
In the SQL Profiler for the Witness Server I get "An error occurred while receiving data" Error 64.
In the witness server logs is nothing depending on this.
The connection between the witness and principal and the mirror and principal are all right. I have created User logins with certificates on the same way on all instances.
What can I do?
Greets
Hi guys , I would like to know what's the exactly results able to get in this following scenario.
Server A : Principal
Server M : Mirror
Server W : Witness
1) Firstly, disable server M, following by server W. So probably i will unable to connect to Server A eventhough it acts as a principal.
2) Next, if I enable either server M or server W , what will I able to get actually ? Is it the mirroring works like the article which written in Microsoft page ?(http://www.microsoft.com/technet/prodtechnol/sql/2005/dbmirror.mspx#ETPAE)
At here, I get an error message and unable to continue the mirroring section. ( "Database EMS is enabled for Database Mirroring, but neither the partner nor witness server instances are available: the database cannot be opened." or "Database 'EMS' is being recovered. Waiting until recovery is finished." )
3) If I enable both server M and server W, the mirroring continue to work again.
Can I have any assistance on (2) issue? Thx for the assistance.
Best Regards,
Hans
missing witness server information and the fail-over is broken suddenly? 4:00am no maintenance job. I have one sql job on 10pm for backup on database transaction log only.
I can see the primary have problem then perform fail-over to mirror database, the auto fail-over was broken.
I re-build the sql mirror is OK , but i want to find the root cause.
Windows application event was full when there have many failed event, i have increase log size for application event. Â
I am unable to add witness server to my mirror configuration. my error log is throwing error'Connection handshake failed. The certificate used by the peer is invalid due to the following reason: Certificate not found. State 89'.
View 5 Replies View RelatedWe have an application running with a principal, mirror, and witness. If we bring the principal server down, it looks like failover occurs successfully, but the application is not able to access the database. If we bring the server back (so it is now functioning as the mirror), the application is now able to connect to the database. Why isn€™t the application able to connect without the mirror up? Any suggestions?
I have created a Endpoint with "Mirroring Server" on the mirroring instance. Due to the keyword server i am not able to drop the endpoint now.
Also am not able to configure a mirror in a windows workgroup also( the two systems principal and mirror are under same network ). I have followed many ways as per msdn articles and other blogs.
I am not able to connect to the mirror server.Â
I have tried giving the ip addr and the port no, also the computer name:port no, computername.local:port no etc. Both the systems are running on sql server 2008 only
I always get the error as Connection cannot be established to the destination.
(I have also enabled the ports in firewall by creating inbound and outbound rules)
The issue probably lies in NAMING server address i guess.
Hello everybody,
I'am currently testing a MSSQL 2005 mirroring implementation with automatically failover.
1 principal server ====> Server A
1 mirror server ====> Server B
1 witness server ====> Server C
When server A fails Server B becomes Principal. ( which is the general idea ) This is working perfectly.
The problem is when i try to connect to the mirror Server B ( actually the new principal )
I use the .NET connection string with the failover parameter ( even without the parameter ) the connection fails.
( the general error : unable to connect, or connection property has not been initialized )
Data Source=ServerA; Failover Partner=ServerB;Initial Catalog=DBMTest;uid=dbuser;pwd=dbpassword;
This connection property works fine when server A (original principal) is online.
When i run the SQL profiler with the mirror db as profile, i dont see the traffic.
So you think the mirror server has a network problem or was not connfigured for remote access.
i thought that also, but when i create a 'stand alone - non mirrored' database the same application with the same connetion string ( well.....different db) works fine.
The problem must be in the whole mirroring implementation....... ( my idea )
Does anyone had the same problem, or better, doed anyone know how to solve it?
Hope to hear from you soon!
Thank you in advance!
Regards,
W.schmitt
The netherlands
I was trying to test mirroring and now would like to delete the mirror database but it says I need to remove database mirroring first. I deleted the endpoint and cannot figure out how to remove the mirroring. Can someone please help.
View 1 Replies View RelatedII use the mirroring wizard to config all these three servers(windows authorization is used), the error logs in primary server and mirror server are showed as below
a) On primary server:
Error: 1474, Severity: 16, State: 1
Database mirroring connection error 4 'An error occurred while receiving data: '10054(An existing connection was forcibly closed by the remote host.)'.' for 'TCP://mymirror.mydomain:5022'
b) On mirror server:
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed with error: 'Connection handshake failed. The login 'NT AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint. State 84.'.
It states I do NOT have permission on this endpoint, but actually, I grant the permission to the endpoint on both primary and mirror server using command
GRANT CONNECT ON ENDPOINT::Mirroring TO [mydomainmyuser];
Also, I followed the article http://msdn2.microsoft.com/en-us/library/ms189127.aspx ,no firewall issue, the endpoint is created and started by checking sys.database_mirroring_endpoints
Hope someone can help me resolve this issue... Thank you very much..
we config our SAP system to use SQL Server 2005 database mirror. but the mirror server hang by accident, after restart mirror server,the server return to normal,but the mirror can't be resume.
ALTER DATABASE R3P
SET PARTNER resume
the error is:
Msg 1447, Level 16, State 21, Line 1
ALTER DATABASE "R3P" command cannot be executed until both partner server instances are up, running, and connected. Start the partner and reissue the command.
I'm getting the following error when launching the database mirroring monitor and attempt to connect to my database.
TITLE: Connect to Server
------------------------------
Cannot connect to dborat01.hs.pitt.edu.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'xxxxxx'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
Say that ny witness goes down can I have another witness that takes it place
View 1 Replies View RelatedDoes anyone know where I can get SQL Server 2005 witness hosting? Our primary server is in Vermont and our DR site is in New Hampshire. I would like to set up a witness server somewhere off the east coast. I don't want to have to purchase a new server and pay big prices for colo.
Is there such a thing as witness hosting? Would someone be willing to host my witness and I can host yours?
We are trying to set up database mirroring. The mirroring works for the principal and mirrored databases (set up via Management Studio), but when we try to set up the witness database, we are getting the error message €œThe ALTER DATABASE command could not be sent to the remote server instance 'TCP://€¦ (Error: 1456)€?.
The same occurs if I try to do €œALTER DATABASE xxx SET WITNESS =€? in TSQL. We are using the Standard edition for all three. We have tried using several different servers for the witness. All same user, same domain. Any suggestions?
Thanks.
I have set up a SQL Express sytem to act as a witness....all are under the same admin account, all can ping and see each other. When I attempt to start a mirror session, it fails to issue an "ALTER Database" comment and the mirror setup is set to "High Performance".
This is my first time setting this up and it took over a day to do this as it is a relatively new concept, I am not DBA, just a S/W developer set up with the task of communicating with two DB instances which are mirrored. A couple of questions:
1) Is it normal to see the mirror instance in the following mode: (Mirror, Synchronized/Restoring)?
2) Any special steps required on SQL express besides enabling TCP/IP within the Configuration manager? It doesn't need the same instance of the same databaes on it, does it?
Paul
I have managed to set up mirroring on SQl 2005 however i have a come across a problem that i dont know how to resolve.
Im running the mirroring with 'High Safety with automatic failover.'
If i instagate a failover on the Principal Database, the mirror becomes the Principal, and vice versa ... great .. how ever .. i tried the golden test by making the principal server dissapear by yanking out the network connection, expecting the mirror to become the principal.....nope it just stays there in a disconnected / restoring state which isnt any good to man nor beast . I thought that the Witness should have dectected that the principal database had 'dissapeared' and would have made the mirror the Principal.
Any pointers on where i might have gone wrong in the setting up process, i used the mirror wizard
Hi,
I have a basic configuration question.
I removed mirroring on a configuration that is currrently working. Next, I moved the witness server to another IP and changed the FQDN (I patched the machine to another newtork, added a FQDN to our DNS server and reconfigured the machines IP information. I can ping the witness at its new address from the principal and the mirror).
Would changing the Witness's IP and FQDN prevent Database Mirroring from being setup after the certificate has been created and distributed to the principal and mirror instances under the old IP and FQDN? Should the endpoint be reconfigured and a new certificate be generated and distributed after an IP and FQDN change?
Thanks,
Chris
1) Is it possible to place the witness in an instance of VM Ware?
2) Are there any specific claims on the witness server if this uses SQL Server Express 2005?
Thanks in advance!
Dan
I start with 3 servers, in High Safety mode with witness. I disconnect the network cable for the witness. Then I remove the witness from the mirroring session:
ALTER DATABASE db1 SET WITNESS OFF
I reconnect the witness network cable. Now I cannot add the witness back to the mirroring session (either with TSQL or thru the GUI). Here is the error message:
Msg 1433, Level 16, State 4, Server SERVERA, Line 1
All three server instances did not remain interconnected for the duration of the ALTER DATABASE SET WITNESS command. There may be no witness associated with the database. Verify the status and when necessary repeat the command.
I have to stop mirroring (SET PARTNER OFF) and then reconfigure a new mirroring session to be able to include the witness.
If I don't disconnect the network cable, I am able to remove and re-add the witness to the session, no problem.
Is this behavior expected?
Thanks in advance.
Regards,
Michael Lawson
The problem: One server sees the witness, one does not. If the dbs are active on the one that doesn't see the witness and I shut that server down everything works as it should. However, if the dbs are active on the server that sees the witness and I shut that one down the mirror does not take over because it can't see the witness and form a quorum. It throws Event ID 1438 every 20 seconds complaing "The server instance Witness rejected configure request...The reason 1451, and state3, can be used for diagnotics by Microsoft...."
The scenario: I finished setting up a mirror in a WORKGROUP, by going through the GUI and then at the choosing not to start the mirror. That allowed me to modify the NETBIOS names and change them to IP addresses in order to get around the FQDN requirement that I can't fulfill since the servers are in a workgroup. They are in the same subnet and can run SQL queries against each other.
When I query sys.database_mirroring from the database servers I get this on the good server:
mirroring_witness_name mirroring_witness_state_desc
----------------------------------------------------------
TCP://155.17.92.63:5022 CONNECTED
TCP://155.17.92.63:5022 CONNECTED
And this on the bad server:
mirroring_witness_name mirroring_witness_state_desc
-----------------------------------------------------
TCP://155.17.92.63:5022 DISCONNECTED
TCP://155.17.92.63:5022 DISCONNECTED
here's are the results from sys.database_mirroring_witnesses
database_name principal_server_name mirror_server_name safety_level safety_level_desc
-------------- -------------------------- ------------------------- ------------ ------------------
dbadmin TCP://pscdaltpscom20:5022 TCP://155.17.92.65:5022 2 FULL
dbtest TCP://pscdaltpscom20:5022 TCP://155.17.92.65:5022 2 FULL
Oddly, the server that I created the mirror from registered itself with it's NETBIOS name even though I told it to use an IP address. However, that's the one that is working properly. I think this might be a red herring.
Does anyone have any ideas why my second server can't communicate with the mirror? Any clarifications I can make? I have been completely unable to find a step-by-step guide to creating mirror databases outside of a domain...so if someone knows of one please point me that direction.
Can 1 witness server work for 4 Principal and mirror servers?
Needs expert advise.
Not sure where I am going wrong ... I am able to set-up the mirroring, but the witness set-up always fails. I am running all the 3 SQL servers (Enterprise edition) with same domain account, which is also a member of sysadmin locally within each SQL server.
When I try to add the witness on Principal using the following command:
ALTER DATABASE MyDB
SET WITNESS = 'TCP://WitnessServer:7022'
I have even tried the IP address with port number and fully qualifying domain (TCP://WitnessServer.xx.xx.com:7022) and I get the following message in error log.
2006-06-20 10:16:55.07 spid57 The ALTER DATABASE command could not be sent to the remote server instance 'TCP://WitnessServer:7022'. The database mirroring configuration was not changed. Verify that the server is connected, and try again.
All the 3 servers are configured to use TCP and Names pipes. I can connect, ping and telenet the Mirror Server from Principal. Any suggestions?
I'm running into a problem where I had mirroring working correctly (on server A ->B with C being the witness) then I set another machine(s) up to also use mirroring (X->Y with C also the witness). When I checked the A->B configuration today the witness was disconnected so I removed mirroring all together and attempted to set it up and I'm now getting the error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Alter failed for Database 'A'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The ALTER DATABASE command could not be sent to the remote server instance 'TCP://C:5022'. The database mirroring configuration was not changed. Verify that the server is connected, and try again. (Microsoft SQL Server, Error: 1456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=1456&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
One of my client asking mirroring between two server with witness.Is it possible witness and mirror in same server(with same instance)? OR Is it possible witness and primary in same server(with same instance) ? Best method to establishing mirroring with in two servers(with witness) ?
View 4 Replies View RelatedI need to start mirroring the databases without witness server.
View 3 Replies View RelatedI'm devlving into 2005 and specifically mirroring.Having read the following article (http://www.microsoft.com/technet/pr...5/dbmirror.mspx ),is mirroring a sensible option as it indicates that it should not beused in a production environment, yet the SQL2005 seminars I've been toindicate that this is a worthy option.Do we also need a witness server, or can this be done (sensibly) withtwo SQL2005 servers ?Currently we have 2xSQL2000 (clustered) servers and a SAN for the data.If we go down the route of mirroring, it looks like we can get rid ofthe SAN and Cluster and use the mirroring instead.Any advice on the pro's / cons would be appreciated.ThanksRyan
View 5 Replies View Related
Hi,
I'm trying to configure mirroring with High Availability, Automatic Failover.
I know that all the jobs and maintenance plans need to be copied to the mirror server, and enabled if a mirror database takes over the principal role.
I wonder if it is a good solution to have all agent jobs on the Witness server (no jobs on principal and mirror). And all the jobs select the server where they should run (depending on current role).
One of the advantages of this approach would be that the jobs have to be created only once on the witness.
Will this solution work? What are the downsides of it?
Thanks,
Anna Sibirtseva.
Not sure if this is relevant here but I thought someone might have seen this.
I am trying to set up Express edition as a mirror witness and am running into a problem.
It seems the express instance thinks its "Host Name"[1] is foo-prod-witnes rather than it's real name foo-prod-witness (notice the additional "s")
When I try to create the security endpoints everything appearsd to work as far as connecting to the express instance but i cannot start the mirror because the address listed is
TCP://foo-prod-witnes:5022 (not a valid hostname)
My enterprise editions report foo-prod-sql01.fqdn:5022
Any ideas how to fix this?
1. As shown in the Host Name tab of the Configuration Manager
I am getting this error while trying to setup mirroring.
"Neither the partner nor the witness server instance for database "shop" is available. Reissue the command when at least one of the instances becomes available. (Microsoft SQL Server, Error: 1431)"
I am just using principal and mirror server, there is no witness server. I have tried fully qualified name and ip for the servers also. I can connect from the principal server to the mirror server using the management studio and it also creates endpoints on prinicipal and witness. But then gives me an error that it cannot find the instance of the mirror server and if I try again it gives the error above. I can also telnet to port 5022.
I have used -T1400 as the startup parameter.
I did the backup and recovery based on this link http://msdn2.microsoft.com/en-us/library/ms189053.aspx and the mirror server is in recovery mode now.