Update ed_abcdeeh set category = case when name_of_school = '' then category = 'No Facility' else '' end,status = case when name_of_school = '' then status = 'Non-Compliant' else 'Compliant' end.
How to make this query right.. when name of school is blank i want to update my category to No facility, but if the name of school has data it will just make it blank. same to the status..
VFP9.0 via MySQL 5.0
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
Is it possible to use CASE in update statement? What is the syntax? I need to pass parameter @week, when @week = 0, 2, 4, then field = @Status and so on
Thanks.
I would like to update a decimal column in a temporary table based ona set of Glcodes from another table. I search for a set of codes andthen want to sum the value for each row matching the Glcodes. Theproblem is I keep getting multiple rows returned errors."Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.The statement has been terminated."This is correct as there can be many rows matching the Glcodes foreach iteration of the case statement and I need to catch them all.I have posted some of the code below and would appreciate any help asI'm scratching my head over this one. It's all very much work inprogress again.Regards,DECLARE@CostCentreNVARCHAR(3)DECLARE@COIDNVARCHAR(3)DECLARE@TheYearNVARCHAR(5)DECLARE@PlorBSNVARCHAR(2)DECLARE@BusinessUnitNVARCHAR(50)DECLARE@BranchNVARCHAR(3)SET@CostCentre= 'xxx'SET@COID= 'inc'SET@TheYear= '2004'SET@PlorBS= 'x2'SET@BusinessUnit= 'PBUS'SET@Branch= ‘usa'CREATE TABLE #SummaryTempTable ([GLD_ACCTNG_PER] int,[Order Num] decimal(9,2),[Summary Description] varchar(50),[Summary Amount] decimal(9,2))INSERT INTO #SummaryTempTable VALUES(199999, 1.1, 'Tot Ext Sales',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 1.2, 'Tot Int Sales',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 1.3, 'Inter Mark Up',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 2.1, 'Tot Ext Costs',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 2.2, 'Tot Int Costs',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 2.3, 'Inter Mark UpCharges', 0.0)UPDATE #SummaryTempTableSET [Summary Amount] = (SELECT sum(CASEWHEN ((ACT_GL_NO between '4000' and '4059') or (ACT_GL_NO between'4065' and '4999') or (ACT_GL_NO IN ('4062','4063'))) THEN GLD_TotalWHEN (ACT_GL_NO IN ('4060','4064')) THEN GLD_TotalWHEN (ACT_GL_NO = '4061') THEN GLD_TotalWHEN ((ACT_GL_NO between '5000' and '5059') or (ACT_GL_NO between'5065' and '5401') or (ACT_GL_NO IN ('5805','5806','5062','5063')))THEN GLD_TotalWHEN (ACT_GL_NO IN ('5060','5064')) THEN GLD_TotalWHEN (ACT_GL_NO = '5061') THEN GLD_TotalELSE 0END)FROM howco_dw_test.dbo.cubeFinancePeriodWHERE ([coid] = @COID) AND (GLD_SSN_BRH = @Branch) AND(GLD_ACCTNG_PER like @TheYear) AND ACT_GL_NO BETWEEN 4000 AND 9999AND GLD_CST_CTR IN ('008','021','031','041')GROUP BY ACT_GL_NO, GLD_ACCTNG_PER)
View 1 Replies View RelatedIs it possible to use CASE statement with INSERT /UPDATE statement?this is what i am trying to do
i have a table like this
Field1 Field2 Field3 FieldType1 FieldType2 FieldType3
1-when there is no data for a given combination of Field2 and Field3,i need to do "insert".i.e the very first time and only time
2-Second time,when there is already a row created for a given combination of Field2 and Field3,i would do the update onwards from there on.
At a time value can be present for only one of the FieldType1,FieldType2,FieldType3) for insert or update
I am passing a parameter to the stored procedure,which needs to be evaluated and wud determine,which field out of (FieldType1,FieldType2,FieldType3)has a value for insert or update .this is what i am trying to do in a stored procedure
CREATE PROCEDURE dbo.StoredProcedure
( @intField1 int, @intField2 int, @intField3 int, @intFieldValue int , @evalFieldName varchar(4) )So i am trying something like
CaseWHEN @evalFieldName ="Fld1" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,@intFieldValue,cast(null as int) fld2 ,cast(null as int) fld3)
CaseWHEN @evalFieldName ="Fld2" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,@intFieldValue,cast(null as int) fld3)
CaseWHEN @evalFieldName ="Fld3" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,cast(null as int) fld2,@intFieldValue)
END
similar trend needs to be followed for UPDATE as well..obiviousely its not working,gives me synatax error at case,when,then everywher.so can someone suggest me the alternative way?..i am trying to avoid writing stored procedure to insert/update for each individual fields..thanks a lot
can plz anyone tell me how to fix the following update script. thanks
Update table
set rating =
case
when rating in
(select code from tbl_Codes
where code = '0')
then Rating = '0'
when Rating in
(select code from tbl_Codes
where code = '1')
then InternalRating = '1'
else rating
end
I am trying to run the below but I get an error of 'Incorrect syntax ')'' Â --- I have tried every angle I can think of around the parens to fix this but nothing I do is working.
UPDATE abcdefg
SET [Date] = GETDate(),
[readytogo] =
(
CASE WHEN [customername] NOT IN (Select [customername] from [server].[database].[dbo].[view])
THEN 'Yes'
ELSE
'Needs Verification'
[code]....
Hi, i've got this stored procedure:
@LidFederatieNummer varchar(20),
@ClubID int,
@LidClubNummer varchar(50),
@PersoonNaam varchar(100),
@ClubStamnummer varchar(10),
@ClubNaam varchar(50),
@SeizoenID int,
@ShowAllJN bit,
@LidFederatieJN int,
@CategorieID int
AS
BEGIN
IF @CategorieID IS NOT NULL BEGIN
DECLARE @LicentieVerplicht int
SET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
END
IF (@ShowAllJN = 0)
BEGIN
SET RowCount 100
END
CASE @LicentieVerplicht
WHEN '1' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 1
Order By Persoon
END
WHEN '2' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN)
ORDER BY Persoon
END
WHEN '3' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 0
Order By Persoon
END
According the value of my @LicentieVerplicht variable:
DECLARE @LicentieVerplicht intSET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
My where clausule should change... how can i achieve this cause my case is not working because it is not inside the select statement
Hi everyone,
I have the following problem withj this query:
SELECT DocNumber,
Title,FirstName,LastName,Paper,
ANNO,Location,Keywords,
URL= case WHEN URL IS NULL THEN
'|<a
href=''https://illiad.library.nova.edu/illiad/FNN/illiad.dll?ILLiadRedirect=OpenURL&genre=thesis&isbn='+CONVERT(varchar,DocNumber)+'&title='+CONVERT(varchar,Title)+'&rft.pub='+CONVERT(varchar,Program)+'&rft.edition='+
CONVERT(varchar,Paper) +'&date='+ CONVERT(varchar,ANNO)+
'&aulast=' + CONVERT(varchar,Lastname) + '&aufirst=' +
CONVERT(varchar,Firstname)+
'&url_ver=Z39.88-2004&rfr_id=info:sid/MARPS:Practicum''target=''blank'')>
Order through ILLiad</a>' ELSE URL END
FROM DocTable1 WHERE FREETEXT....
When URL is null, I don't get the string showing. It works properly only in the query analyzer.
Any ideas?
Christian
Hey guys, i'm trying to use a CASE within a select but i'm not sure how to get started.
Here is my select so far, i'm inserting into a temp table that is used within a loop to gather data from my trigger:
Code:
insert into @temp_par
select CONVERT(varchar(20),d.PAT_ID),
ep.EXT_PAT_ID,
d.DRUG_DESC_ID,
d.ALLERGY_CD,
CONVERT(varchar(20),d.PAR_DT,120),
ISNULL(d.PAR_TXT, 'NULL'),
ISNULL(REPLACE(m.DRUG_NM,'"','^"'),'NULL'),
ISNULL(m.DOSAGE_FORM_CD,'NULL'),
ISNULL(m.STRGTH,'NULL'),
ISNULL(m.STRGTH_UM,'NULL')
from deleted d --PATIENT_PRIOR_ADVERSE_REACTIONS
join EXTERNAL_PATIENT ep on ep.PAT_ID = d.PAT_ID
join MEDNAME m on m.DRUG_DESC_ID = d.DRUG_DESC_ID
I would like to use a CASE for the d.ALLERGY_CD column. The data in this column is usually a 1,2,3,4,5 but i'd like to convert those to their real data, for example:
Code:
1 = A
2 = B
3 = C
4 = D
5 = E
Any help?
Limitations: Needs to be single sql statement for exec, no udf/stored proc
Objective: select aggregate count from tblPerson grouped by s_fk, division,Desc, areaDesc with rollup for totals
if mail_goes_to=1, get the s_fk value via tblPerson/tblAffiliation/tblOrg/tblCity/tblCounty
if mail_goes_to=2, get the s_fk value via tblPerson/tblCity/tblCounty, skipping tblAffiliation/tblOrg
What's the best method? A case statement? Would a cross-join work? Thanks so much for any and all advice!
tblPerson: person_pk, affiliation_fk; home_city_fk, mail_goes_to
tblAffiliation: affiliation_pk, organization_fk
tblOrg: organization_pk, city_fk
tblCity: city_pk, county_fk
tblCounty: county_pk, s_fk
For resulting display only:
tblPersonArea: personArea_pk, area_fk, person_fk
tblArea: area_pk, areaDesc, division_fk
tblDivision: division_pk, divisionDesc
Hi,
I'm wondering what syntax to use for a select case statement.
I have a list of questions. If a particular question is on the list, then it shouldn't show some other related questions.
For example, "have you been in the military?". If you haven't , then you wouldn't be asked all the military related questions.
So- I'm saying:
select case when question_id = 488 then don't return question_id 220, 962, 963
I'm trying something like this:
select q.client_id,
case when q.question_id = 488 then end q.question_id = 220 else q.question_id = 220 end q.question_id
from questions_yes_no q
How would I say 'dont show' question 220? End is not the way to go, obviously.
If you can see what I'm trying to do, can you point me to an article or bol search?
Thank you for any help.
INSERT INTO #rpt(Hic, DtImported, Source, PlanID, LastName, FirstName, MemID, CaseStatus)
SELECT
s.Hic,
s.DtImported,
s.Source,
dbo.LastErolledPlan_C_D(s.Hic,s.IsPart_C) as PlanID,
m.LastName,
m.FirstName,
dbo.GetMemID_PartC_D(s.Hic,s.IsPart_C) as MemID,
s.CaseStatus = CASE WHEN CaseStatus ='1' or CaseStatus='0' THEN 'New'
CASE WHEN CaseStatus <>'1' or <> CaseStatus <>'0' Old
ElSE 'No Valid'
End
from tbEsccSuspects s inner join tbPDMMembers m
on s.Hic = m.HicNumber
Where s.EUFStatus = 1 -- AND DtEUFSent is NULL
what I am doing wrong in the case statment that I am getting an error. ?????
I have a situation where I want to update a column if and only if it is null.
UPDATE Employee
SET VEmployeeID = CASE WHEN E.VEmployeeID IS NULL
THEN ves.VEmployeeID
END
FROM Employee E
INNER JOIN VEmployeeStaging VES
ON E.EID= VES.EID
But what happens is when I run the procedure every other time I run it, it changes everything to null. The other times it puts the VEmployeeID in.
So what is happening is the times when it is not null (where it is not supposed to do anything) it puts a null in. The next time it works.
I have used the below update query. However, its updating only the first value. Like its updating AB with volume when c.Type = ABC, similarly for CD. Its not updating based on the 2nd or the next case condition.
Â
Update XYZ Set AB = a.Amt * (CASE WHEN c.Type = 'ABC'Â THENÂ (c.volume)
 WHEN c.TYPE = 'DEF' THEN (c.volume)
 WHEN c.Type = 'GHI' THEN (c.volume)
 Else 0
 END),
 CD = CASE WHEN c.Type = 'MARGIN' THEN '4105.31'
 WHEN c.Type = 'ABC' THEN '123.1'
 WHEN c.Type = 'DEF' THEN '234.2'
WHEN c.Type = 'GHI' THEN '567.1'
END
 from table1 a join table2 b
 on a.Cust = b.Customer
 join table3 c
 on b.account = c.account and b.channel =c.channel
Why its not working properly? But if i use Select statement instead of update query its working properly.
I have a table A  and lookup table B.
table A:
| ID | FRUIT | VEGETABLE | GOOD |
--------------------------------------------
|  1 | orange | cabbage    |  no  |
|  1 | apple | lettuce       | yes  |
|  1 | kiwi    | broccoli     |  no  |
|  1 | pear   | kale          | yes  |
table B:
| ID | FRUIT | VEGETABLE |
-------------------------------
| 1 | apple | lettuce      |
| 2 | pear   |  kale        |
If the fruit and vegetable in table A is found in table B, then set the GOOD column = yes, else no.
This is what I have so far.
update tableA
set GOOD =
(case when tableA.id = C.id then 'yes'
else 'no'
end
)
from
(select tableA.id as id
from tableA A
left join tableB B on B.fruit = A.fruit
and B.vegetable = A.vegetable) C
Hi,I am wondering how do I write a query that will take case sensitive into consideration. For example, I have "ABCD", "abcD", ABcd", "AbCd" in a table. I want to retrieve "AbCd" only from the table. This is the sql statement that I have:sqlSelect = "SELECT * FROM [al_table] WHERE [alphabet]= @alpha"Dim selectCmd As New SqlCommand(sqlSelect, myConnection) selectCmd.Parameters.AddWithValue("@alpha", "AbCd") From what I have it will return all those value. But that is not what I want. Thanks
View 4 Replies View RelatedI need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement???
is this correct ?? its showing me errors
Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ???
(case when 'DataSource =1' then 'ABC' then 'BCD' endcase)
Where .....
Pls correct me
Thanks
Hi All,
I need a hand in this script.
SELECT a.id ,value = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
,value2 = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
FROM table_name a
where value > 0
ORDER BY VALUE
The problem I'm having is in the where clause. Because the value is not a column name sql server is giving me an error. I need to evaluate the value returned. How can I get around this problem? Any sort of advise will help!
Thank you in advance!
Hi folks,
Hope you are all well.
I am using a CASE statement within a SELECT query to sum up values for different customers.
SELECT CR_CUST.Customer_Code,
'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END
FROM CR_CUST
INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code
INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code
WHERE (CR_PROD.Part_Class_Code = 1 OR
CR_PROD.Part_Class_Code = 7 OR
CR_PROD.Part_Class_Code = 8)
GROUP BY CR_CUST.Customer_Code,
CR_PROD.Part_Class_Code
The above query produces the following results...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 .00 .00
02347 7606.49 .00 .00
02210 .00 12618.42 .00
02347 .00 13131.63 .00
02210 .00 .00 4505.44
02347 .00 .00 5018.03
My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 12618.42 4505.44
02347 7606.49 13131.63 5018.03
I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.
SELECT Customer_Code,
SUM(General_01),
SUM(General_07),
SUM(General_08)
FROM #MyTempTable
GROUP BY Customer_Code
Thanks in advance,
Kev
How come SQL Server doesn't like the following?
CREATE PROCEDURE sp_myproc
(@myvar int)
AS
CASE @myvar
WHEN 1
EXEC sp1
WHEN 2
EXEC sp2
WHEN 3
EXEC sp3
DEFAULT
EXEC sp3
END
How can I code something like this legally in T-SQL?
Thanks
Jason
Hello everybody
I have problem with CASE statement. Here is select it
Code Block
select
mev.Id
,mev.MetaElementId
,mev.ElementValue
,mev.DocumentId
,me.ElementTypeId
,castedValue =
case
when me.ElementTypeId =3 then cast(mev.ElementValue as integer)
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
end
from dbo.tbMetaElementValue mev
inner join dbo.tbMetaElement me
on mev.MetaElementId = me.Id
where mev.MetaElementId =7
it returns
Id
MetaElementId
ElementValue
DocumentId
ElementTypeId
castedValue
49
7
2006
28
3
6/30/1905 0:00
53
7
2004
30
3
6/28/1905 0:00
61
7
2006
36
3
6/30/1905 0:00
67
7
2005
38
3
6/29/1905 0:00
70
7
2004
39
3
6/28/1905 0:00
105
7
2003
63
3
6/27/1905 0:00
166
7
2006
109
3
6/30/1905 0:00
195
7
2005
129
3
6/29/1905 0:00
220
7
2005
150
3
6/29/1905 0:00
223
7
2006
151
3
6/30/1905 0:00
As you can see it should return castedValue as integer but it cast to datetime which is wrong. If I commented line
Code Block
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
it casts everything normal, but as soon as it has more than one condition in CASE it will choose anything but not right casting
Looks like I am missing something really fundamental. Any help is apreciated !
Thanks
I want to update multiple column in one table using with case statement. i need query pls..
stdidnamesubject result marks
1 arun chemistry pass 55
2 alias maths pass 70
3 babau history pass 55
4 basha hindi NULL NULL
5 hussain hindi NULL nULL
6 chandru chemistry NULLNULL
7 mani hindi NULLNULL
8 rajesh history NULLNULL
9 rama chemistry NULLNULL
10 laxman maths NULLNULL
Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears. Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname. I have been advised to use CASE statements, yet I do not know how to use them. Below have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then Dim tkt As FormsAuthenticationTicket Dim cookiestr As String Dim ck As HttpCookie tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _ DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data") cookiestr = FormsAuthentication.Encrypt(tkt) ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr) If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration ck.Path = FormsAuthentication.FormsCookiePath() Response.Cookies.Add(ck) Dim strRedirect As String strRedirect = Request("ReturnURL") If strRedirect <> "" Then Response.Redirect(strRedirect, True) Else strRedirect = "webform1.aspx" Response.Redirect(strRedirect, True) End If Else Response.Redirect("webform3.aspx", True) End If End Sub
View 1 Replies View RelatedHi ALL,
How could you make the SQL Select statement query case sensitive, what i mean is i have this select statement below ...
Select * From Staff WHERE Staff.Staff_ID = 'KabirJ' AND Staff.Password = 'KaBir1!'
and a data row in the staff table that is the following information
Staff_ID Password
Kabirj kabir1!
Since the cases in database is different then in the string provided, i want sql to return me nothing, How do i go about and achieve that???????????
Thanks
Kabir
I have the following query:
(SELECT MIN(CFGDates.AccountPdEnd)
FROM CFGDates LEFT JOIN
AR ON AR.Period = CFGDates.Period
WHERE AR.Period = '200408')
I need to convert this into a case statement.
I tried various ways but did not get the result that I was after
Thanks,
Laura
I am a junior dba not a developer. So I'm just trying to get use to write code in T-SQL.
Anyways, I have a table which is dba.dbhakyedek.
Columns are
dbname, username, class_desc, object_name, permission_name, state_desc
I have statement
select case
when class_desc='OBJECT_OR_COLUMN' then 'GRANT '+permission_name+' ON '+'['+left(object_name,3)+'].'+'['+substring(object_name,5,len(object_name))+ '] TO '+username
WHEN class_desc='DATABASE_ROLE' THEN EXEC sp_addrolemember N'object_name', N'MC'
end
from dba.dbhakyedek
where username='MC'
This statement was running successfully until exec sp_addrolemember thing. I just learned that i can't call a sp in select case but i couldnt figure out how to do it.
below is my original query
select Value = count(*) from dbo.testÂ
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.