What Errors Normally Should I Log For My SSIS Package?
Oct 16, 2006
I got an SSIS package
that first "truncate the product table" then populate the table with new rows....if there is an error then i will invoke the send email task. However in the "truncate the product table" task, the sql i put "truncate dbo.product" instead of "truncate table dbo.product" but this error is not captured in the text file that I m going to send an email to the appropriate personnel.
Under logging, and when i go into "truncate product table" tasks , "Details", i saw "OnError", "OnWarning" and other error handlers...which should i tick in order for the text file to ONLY show errors I encounteered during the running of the SSIS package?
View 8 Replies
ADVERTISEMENT
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Jun 22, 2007
Hi folks,
I have a simple SSIS package I built to migrate data from a SQL db on one server to another SQL db on another server. All it does is: Execute SQL task to disable some triggers on the target table, Data Flow Task to pull the data from the source (a simple sql query) into the destination table (using OLEDB), then another Execute SQL task to re-enable the triggers.
This package ran fine several times during my testing. However, this morning it's not working anymore. When I run it and check its progress, the "Validation has started" is the only thing runs, then nothing else happens... no error messages, no timeouts, nothing in the output window besides "DTS.Pipeline: Validation phase is beginning".
The only thing that has changed is one change to a date in the where clause of my source query, so I'm baffled on why it no longer runs.
I'm pretty new to SSIS, so I could easily be missing something obvious here.
Anyone have any ideas on what's up, or who can point me in the right direction? I'm currently reading up on how to debug and add more comprehensive error handling, in hopes of finding a better description of the problem.
Thanks in advance,
Geoff
View 4 Replies
View Related
Feb 14, 2007
Hi All,
I hope someone can help becuase this problem is issue us several headaches.
We are currently trying to deploy an SSIS package to a production server. The deployment goes fine, the package runs ok when executed manually. The issues start when we try and execute it under the SQL agent.
Having gone back to the drawing board and spent much of the day reading various articles and applying the various options (especially those within the MS KB article 918760), we are still no closer to a resolution.
The SSIS package was created under an Administrator, and the SQL agent runs under a different Domain Admin account.
When we set up the Schedule to read from SQL Server or the SSIS Store the standard "Executed as user: DOMAINUSERNAME. The package execution failed. The step failed" in the history.
We tried to create the package as a file access and now get "Package could not be found" even though you can browse to i in the schedule list. The Domain account as full access to the folder where the package resides.
Has anyone else come across this issue, or have a workable solution?
Many TIA.
View 6 Replies
View Related
Jan 29, 2007
I have an SSIS package that fires an OnTaskFailed event whenever any of my tasks fail.
I would like to put any SSIS task failure message into a user defined variable.
Any idea how to do this?
Any help appreciated.
Regards,
Paul.
View 1 Replies
View Related
Aug 10, 2007
I get errors when I check out an SSIS package from source control (both Source Safe and TFS) relating to the connection objects where I was not the original developer who checked it in. Is there a solution to this other than altering the connection loginpassword for every connection object in the package before deploying?
View 4 Replies
View Related
Mar 28, 2007
I've deployed an ssis package to the database server through the manifest file over the network..
The package runs great when testing through vs.net on my client.
I've added the package to a job step in the sql server job agent.
When I test the new job, the package step fails, but there is no error or log information in the job history.
Wwhere can I get error information? And/or How can make SSIS error information more verbose in the job history?
Thanks for any help or information.
View 6 Replies
View Related
Feb 20, 2007
Lately, I have been experimenting with SSIS and I created a generic custom error logging component that saves all offending data on data flow component failure. However...
Instead of re-directing rows at the data flow level and handling/logging the data at that level, is it possible to catch all of this information at the package level and handle/process it there?
If so how would you do this?
Thanks!
Tony
View 13 Replies
View Related
Oct 24, 2007
Hi
I have created a package which executes every 10 mins. Last week end for maintenance purpose, I shutdown my database. Now as an initial execution process, my package does the default validation steps on which the database connection validation step fails. As this is the default functionality of SSIS I am not able to capture this error. Is there anyway to capture this error inside SSIS Package?
Thanks in advance.
Gnan
View 3 Replies
View Related
Dec 12, 2013
I have a data flow task in which I have a ADO NET source and OLE DB Destination. I have in the ADO NET source a sql command which pulls all the columns in a table. My requirement is to ignore a particular column,say column99. I opened advanced editor and deleted the mapping between the external and output columns for column99. I had also set the Error and Truncation to "Ignore Failure" for column99. I had also mapped the destination column to <Ignore> in OLD DB destination.
But this still throws the error-
Description: The ADO NET Source was unable to process the data. Field table-column99 missing an escape character for a quote.Unable to update PK WHERE clause.Error processing data batch.
How do I solve this?
View 9 Replies
View Related
Apr 10, 2006
I have imported a package using SSIS into the Maintenance Plan folder from another server.
It imports fine, but when i Modify the package then click save I get the following error : 'Guid should contain 32 digits with 4 dashes'.
This has been reported on other forums without resolution.
Pete
View 17 Replies
View Related
Jul 24, 2015
I have an SSIS and SSAS project in the same solution. Â I need to debug the SSIS package regardless if there is an error or two in the SSAS project. Â Is there a way to ignore the SSAS project while I debug the SSIS package?
View 2 Replies
View Related
Jul 31, 2006
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
View 5 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 5, 2004
I have created several DTS packages that run if I execute them imidiatly, but error out if scheduled with the following error...
Executed as user: DomainUsername. DTSRun: Loading... Error: -2147467259 (80004005); Provider Error: 17 (11) Error string: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
View 13 Replies
View Related
Aug 17, 2006
I installed Sql Server Express Advanced today, and decided to install the toolkit as well. When I open Business Intelligence Development Studio, I get the "Package Load Failure" for the 'ReportDesignerPackage' and 'DataWarehouse VSIntegration layer' packages. I can't seem to find any recent clogs or forum responses that address this issue, and the older ones (most are from 2005) haven't solved the problem. Do I have to reinstall everything???
Thanks,
Joe
View 3 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Jan 5, 2007
I am having strange errors with a package when running locally that has not been an issue before.
The main symtom is that several Data Flow Tasks are either not inserting records on the destination or are only inserting 1 single record before the package errors with the error shown below.
Strangely, the debugger will show X # of records from source and destination, but either no records are actually written or, again, in many cases, only 1 single record is written. This is very strange.
App, System and Security logs yield no indication of security or other errors. All I have to go on is the above anomolies and the error message provided below.
Below is the error message, can someone help me decrypt it?
Many thanks,
Rick
Error: 0xC0202009 at DFT_LoadProcessUnits, OLE_SRC_VLD_PROC_TDV_RESULT [1]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
Error: 0xC0047038 at DFT_LoadProcessUnits, DTS.Pipeline: The PrimeOutput method on component "OLE_SRC_VLD_PROC_TDV_RESULT" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "SourceThread3" has exited with error code 0xC0047038.
Error: 0xC0202009 at DFT_LoadProcessUnits, OLE_SRC_DimEntities [199]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available.
".
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047038 at DFT_LoadProcessUnits, DTS.Pipeline: The PrimeOutput method on component "OLE_SRC_DimEntities" (199) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread4" has exited with error code 0xC0047039.
Information: 0x40043008 at DFT_LoadProcessUnits, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at DFT_LoadProcessUnits, OLE_DST_FactResults [2076]: The final commit for the data insertion has started.
Information: 0x402090E0 at DFT_LoadProcessUnits, OLE_DST_FactResults [2076]: The final commit for the data insertion has ended.
Information: 0x40043009 at DFT_LoadProcessUnits, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at DFT_LoadProcessUnits, DTS.Pipeline: "component "OLE_DST_FactResults" (2076)" wrote 0 rows.
Task failed: DFT_LoadProcessUnits
View 16 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
Aug 1, 2007
hi,
I am trying to use SSIS package to trasfer data and hitting road block for
[SQL Server Destination [37]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
How can i resolve this!!
thanks
View 2 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Jun 7, 2006
I have a dataset that is between 40-50K records that has to go through a process that is pre-defined. SSIS works just fine with the smaller sets even up to 20K but this job keeps blowing up saying something along the lines of cannot write to recordset destination. Does this make sense to anyone? The sever is a 2 processor with 2GB of ram. Physical memory usage spikes to about 1.6GB during the run but the processor never really gets above 30% usage. Does this product just not scale yet?
View 1 Replies
View Related
Sep 10, 2007
I have been getting a recurring error while running the folowing script from an SSIS package. I have bolded the parts that I think may be of use. I didn't know if this would be a T-SQL or SSIS question, but thanks in advance for help.
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "declare @dbname varchar(200)declare @mSql1 varchar(8000)
DECLARE DBName_Cursor CURSOR FOR
select name
from master.dbo.sysdatabases
where name not in ('mssecurity','tempdb')
Order by name
OPEN DBName_Cursor
FETCH NEXT FROM DBName_Cursor INTO @dbname
WHILE @@FETCH_STATUS = 0
BEGIN
Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin,
db_securityadmin, db_ddladmin, db_datareader, db_datawriter,
db_denydatareader, db_denydatawriter )
SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ '
Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner,
Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin ,
Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin,
Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin,
Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader,
Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter,
Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader,
Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter
from (
select b.name as USERName, c.name as RoleName
from ' + @dbName+'.dbo.sysmembers a '+char(13)+
' join '+ @dbName+'.dbo.sysusers b '+char(13)+
' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c
on a.groupuid = c.uid )s
Group by USERName
order by UserName'
--Print @mSql1
Execute (@mSql1)
FETCH NEXT FROM DBName_Cursor INTO @dbname
END
CLOSE DBName_Cursor
DEALLOCATE DBName_Cursor
" failed with the following error: "Line 15: Incorrect syntax near '2003'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Execute SQL Task 1
View 4 Replies
View Related
Nov 27, 2006
We have deployed an SSIS package successfully to production. We needed to apply SP1 to fix a different issue and now have encountered a new problem. We have numerous Data Reader Sources in different Data Flow Tasks that connect to a IBM iSeries (DB2) source. Pretty simple extracts that have worked fine in the past. They pump the data into staging tables on the SQL2K5 instance running the package (64-bit).
After we applied SP1 however, all of the Data Reader tasks fail AFTER they successfully copy the records with the following error.
[iSeries Invoice Details [1]] Error: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
If I delete the source and destination and recreate identical transforms, they work fine, but I don't feel like rebuilding all of the extracts. Any ideas! The problem occurs in all environments that we've tried.
TIA,
Michael Shugarman
P.S. I just tried the SP2 CTP, but that doesn't fix the problem.
View 2 Replies
View Related
Sep 20, 2006
When I have an alternet Data Flow in an event handler, caused by a record failing to be inserted due to a unique-key constraint violation, does this increment the number of errors, counting towards the MaximumErrorCount? How can I NOT count it as an error?
The thing is, I need to insert 300,000+ records each day, and some may be duplicates from data already in the table. So I set a unique key constraint on the table, and if during the load, it fails, it will trigger an alernate data flow to load the error records into another table. But if someone tries to load a file that already has been loaded, for example, all the records would be duplicates, which would be equivelant to 300,000+ errors, and I don't want to keep setting the MaximumErrorCount property higher and higher.
Is there any way to treat the error as "being handled" in the dataflow, so therefore doesn't treat it as an error? Or conversely, can I set the MaximumErrorCount property to 0 or -1 to accept all errors, no matter how many?
View 6 Replies
View Related
Sep 24, 2007
Hello,
I'm getting the following error running a package...
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message
ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
09/24/2007 15:00:00,Hourly Extract From OReSA,Error,0,INHSCTSTTOMVM82,Hourly Extract From OReSA,(Job outcome),,The
job failed. The Job was invoked by Schedule 7 (Hourly). The last step to run was step 1 (OReSA
Extract).,00:00:59,0,0,,,,0
09/24/2007 15:00:01,Hourly Extract From OReSA,Error,1,INHSCTSTTOMVM82,Hourly Extract From OReSA,OReSA
Extract,,Executed as user: INENVts_hia. hod call failed. End Error Error: 2007-09-24 15:00:58.93 Code:
0xC0047017 Source: dtProduceExtractFiles DTS.Pipeline Description: component "ole_srcExtractDB" (22) failed
validation and returned error code 0xC020801C. End Error Error: 2007-09-24 15:00:58.93 Code: 0xC004700C
Source: dtProduceExtractFiles DTS.Pipeline Description: One or more component failed validation. End Error
Error: 2007-09-24 15:00:58.93 Code: 0xC0024107 Source: dtProduceExtractFiles Description: There were
errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started:
3:00:01 PM Finished: 3:00:58 PM Elapsed: 57.75 seconds. The package execution failed. The step
failed.,00:00:58,0,0,,,,0
But it works on other machines and other SSIS packages are running ok on the offending box.
Any ideas?
Thanks in advance,
Tony.
View 4 Replies
View Related
