after upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 Replieswhen i connect a dvi or hdmi from my gtx 780 to my acer H274HL Monitor all works fine but when i want to connect display port cable on my gtx 780 and the other side is hdmi that goes to my monitor than there is no signal at all.
i am running windows 10 64 bit enterprise and all drivers are up to date also windows updates are up to date.
Just unboxed my computer from CyberpowerPC, GTX 720 graphics card, installed/updated all drivers with drivereasy (paid for just now) and I am still having the issue with HDMI port not working. I have tried to plug into a monitor and a TV, neither are working, I have also tried to use multiple HDMI cables, still does not work. My monitor has an auto-switch source availability and turned on, when I plug my computer into the monitor with HDMI it continually cycles, finds no signal and goes into sleep mode. Then rinse/repeats until I either turn off the computer, monitor or just unplug the monitor from the computer. Currently I am using a DVI(computer) to HDMI (tv) and its working fine. So I know its the port on the computer. Do I need to contact CyberpowerPC to send the computer back to get this issue resolved?
View 7 RepliesEvery time I restart or boot up my PC with my monitors turned on first I always get a issue with the monitor connected to the HDMI port, it always says "Input not supported" and all I do is turn my monitor off then back on and the issue has been resolved...
GPU: GTX 650
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
I have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
View 1 RepliesSince upgrading to Windows 10 I can't send e-mails from my HP Pavilion 15 laptop (64 bit) but I do receive them on both outlook and live mail but this problem does not effect my dell desktop (32bit) is this a windows problem or my laptop
View 2 RepliesI have an hp pavilion dm4 laptop. i have installed windows 10 and using for last 10 months but after updating to latest build 11082 my finger print scanner is not detected in start up login but i can add fingers and delete fingers in windows hello section. this started only after latest build was installed prior to that i was able to work it out.
View 1 RepliesI am using hp pavilion 15 series P077tx laptop. Currently I am running windows 10 single language. Everything works just fine but when i turn off the laptop it wont shutdown the display goes off but the power led & the system led remains on. I have to hold the power key for 5sec to turn off my laptop every time.
View 1 RepliesI have an Asus Desktop. I plugged a working HDMI cord into my older Sony Bravia TV (Smart TV). I have a GTX 760 192 Bit NVIDIA graphics card. I went to the NVIDIA control panel, and it wont read the TV. I tried going through the windows 10 64 bit version of trying to find connected devices, and the TV shows up but as a media streaming device. It almost seems like the PC itself doesn't know it has an HDMI slot.
View 3 RepliesI have an Acer Aspire V17 Nitro laptop (i7, 16 Gb RAM) which I am using with an external monitor (through the built-in HDMI port).
I recently purchased a USB to HDMI converter so that I could have a second external monitor. This was advertised as being applicable for Windows 7 and 8.1 systems so I figured it should work for Windows 10 also.
Unfortunately when I installed the software, the system crashed. Eventually I managed to restore it to an earlier point so I managed to get the system back to normal. However I cannot seem to be able to find any way of getting this device to work on my laptop. I tried allowing Windows to find the best driver, and even tried a third-party driver that I found on the internet but to no avail.
When I contacted the supplier he said that he had written to his own supplier about this but got no reply, so he offered me half of what I had paid for it as a refund. I accepted this but would really like to be able to use the device.
I updated my HP Pavilion laptop to Windows 10 last weekend. Ever since then, I've had a problem any time I'm typing. I can't seem to type for more than 5 seconds without a left click happening on its own (sometimes it's a right click, oddly), which usually either opens a menu, moves where in the document/webpage I'm typing, or stops my typing altogether.
For example, if I'm on an email website, and click New Mail or Reply and leave my cursor hovering over that button, after about five seconds of my typing, the button is clicked again. If I'm typing in a box (like I'm doing right now), I can keep the cursor hovering over the box and my cursor will click somewhere else in the box suddenly, or if I keep the cursor hovering over the outside of the page it'll click and suddenly I can't type anymore. If the cursor is hovering over something I've already typed, I'm suddenly typing back in that earlier text.
This happens when using both a wireless mouse or the touchpad. I typically have the touchpad turned off so I can use the wireless mouse, but have the same problem with the mouse off and its USB dongle not connected.
I also have a problem when using the touch pad that after I've typed for, again, about five seconds the touch pad is completely unresponsive. That's not as bad a problem, since I normally use the wireless mouse. But I'd like to get that fixed, too.
I have a new all in one desktop. I want to use the monitor as an extenal screen for my laptop. I connect the hmdi lead from the laptop to the AiO hdmi input socket. The laptop 'sees' the external monitor (Fn and F5 tells me this) but the monitor will not detect the laptop.
View 1 RepliesI tested the internal HDD with CrystalDiskMark and was able to get 109 MBPS both on sequential read and write tests. Then, when I tested my 1 TB WD My Passport USB 3.0 External HDD with CrystalDiskMark the sequential read and write speed did not exceed 40 MBPS the few times I tried. Got similar 30-40 MBPS speed when transferring movies from external HDD to internal HDD.So far, I have tried updating the external HDD and USB 3.0 Controller drivers. Tried with 'USB selective suspend setting' disabled (Under Power Plan Options). Also tried with write caching enabled. But havent been able to solve the issue.My laptop is running Win 10 Home 64-Bit. I am sure I used the USB 3.0 port. And, I used the USB 3.0 cable supplied with the external HDD. I don't have another USB 3.0 device so cannot figure out whether the issue is with my laptop of the external HDD.'
View 4 RepliesSo when I installed windows 10 my mouse stopped working but its been recognized in device manager and I don't know whats wrong. Mouse is ps/2 ....
View 1 RepliesI have a Dell Inspiron N5110 from 2011. Windows 10 is installed and working, Using it right now but with an external monitor. Found several posts about booting into a black screen but they seem to only be the case when there is a cursor floating round as well.
My problem is that when I boot up the laptop I get the windows 10 loading screen. Then it goes black and stays black. The screen is definitely on but not showing anything. And I've left it for an hour and nothing happens. But when I plug in a second monitor it works on there and seems to detect this second monitor as the only one. Once this monitor is attached, the laptop screen turns itself off and cannot be turned back on, not even to the state it was in before of just being black.
Checked and all drivers are up to date. If I change the settings, by hitting windows key and p, to extend the screen then i can drag the mouse from the second monitor into apparently nothing so I really can't tell if the computer knows about its own screen or not. Also sound is working through the laptop.
I encountered this issue recently, and it's caused me a fair bit of frustration. I keep searching for solutions but it seems nobody has any. What I can do to restore Windows 7 (preferably with my files intact) or at the very least finish the upgrade to Windows 10?
View 2 Repliesi can't use my mousepad on my asus laptop after upgrade win8 to win10.
Eventhough i can use the touchscreen but i also need the mousepad to work.
After upgrading to windows 10 my laptop is started heating up and slowed down. I noticed in task manager there is an application named 'IAStoreDataSvc (32 bit)', its using about 30% CPU.
And when I end this app, my laptop behaves normal (no heatup, no slow down). What is this application is for?
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
View 9 RepliesI recently upgraded my laptop from Windows 7 to Windows 10 64 bit and shortly after it was completed, everything was working fine until the screen suddenly went black. The computer was still running but I could not see anything on the screen to restart the computer so I closed the laptop so that it would shut off to sleep. Coincidentally a power outage happend lasting for about an hr after. When I am finally able to boot up the computer, it show the ASUS splash screen and the windows logo with the loading spin cycle but then shows a black screen after. My guess is that the OS may have been corrupted or something so that I plan on backing up my hard drive before going to a tech shop. I'm not sure what the issue is but it seems like I may have to reinstall the operating system. i have an ASUS N61J. I can't boot into bios or safe mode and can't get passed the black screen to log into my user account.
View 1 RepliesThere is no sound output in my sony vaio laptop after upgrading to windows 10.
View 7 RepliesI recently started trying out Windows 10. It's buggy and frustrating, but it's still in preview mode, so... That's expected.
Nothing was working when I installed build 10074 off disc, so I installed build 9926 off a disc (I got the iso from MSDNAA, I'm a programming student) then upgraded via settings to 10074.
During the upgrade, my laptop started resetting, normal. But halfway through, the resets stopped working.
The screen switches off, the cd drive switches off and the hdd activity light switches off, but the power stays on, and the fan keeps running. It also doesn't switch off on shutdown either.
I finally have a working version of Windows 10, minus Cortana and Spartan (I'm in Aus), but now my laptop won't shut down.
Could it be drivers? Is it OS interference? Is there a way to fix it without uninstalling and re installing Win 10? I really cbf going through all that again....
Lost audio on HP DV6700 laptop since upgrading to Windows 10. Ihave removed sound device from device manager and reinstalled, have replaced driver with previously saved W7 driver....still nothing, not even the windows system sounds, critical battery etc.... All seems eps ok except this.....saw a post that says the sound is integrated with the graphic card, but the graphic card now has a windows 10 driver from nvidea.....maybe should downgrade GPU with W7 driver...
Just tried the idea of setting frequency to 16bit 9600 but I received no sound output error box....then went to enhancements settings where it has bass etc etc settings, was disabled so enabled it without choosing any option..then went back to frequency and changed it to default, which is 24 bit 19200....then was told not supported by this device but then miraculously it worked....now have all sound restored windows music everything...not sure if still have windows 7 driver...it is MS 2008... really scared to update the driver as it is all now working....not sure how I fixed it though, was it one particular action ? or a combination...?
I had recently clean installed Windows 10 on my laptop. Before doing that, all my drivers were working well except for WiFi - a problem since build 10158. Currently I am on build 10240.
When I plug usb sticks into the USB 3.0 ports on my laptop, they don't connect. It's not like the 'not recognised' problem. It simply shows no sign of connection like blinking its LED or any response from the OS. On the other hand, when I connect my Lumia phone in the same ports, it warns me of Slow Charging.
And when I plug it into the 2.0 port, it gets connected. Why is this happening? All of my device drivers are up to date. I believe its not a hardware issue because my laptop has two such ports and both of them have the same problem.
I have windows 8.1 installed on my laptop and when I try to upgrade to windows 10, it overheats, shuts down and when I restart it, goes back to windows 8.1.
My fans are clean and everything works just fine with the laptop, I don't understand why is this happening. I also have a friend with a similar laptop model who is having the same overheating problem when upgrading to windows 10 (in his case, from windows 7).