When I open the Task Scheduler, I get many error messages, which mostly resemble to "Task Name: The task object version is either unsupported or invalid" along with a few "The selected task 'Name' no longer exists. To see current task, click Refresh".
One thing I noticed, the tasks were all/mostly (I haven't fully checked) outside the "Microsoft" folder under "Task Scheduler Library" based on my research into the Registry Editor. I have also deleted a few with a back up for each, but, if I try to restore the registry files with elevated rights, I get an error message: "This app can't run on your PC - To find a version with your PC, check with the software publisher". This includes the "regidlebackup" task which I shouldn't have deleted, but it does not want to be restored.
I don't think this occurred before I upgraded to Windows 10 from Windows 7.Also, I could revert back to Windows 7, but the problem is if this issue would be solved by doing so.
I have tried listing the tasks (before the changes in RegEdit) into a text file. For privacy, I have replaced my name by "????".
test.txt
Due to no one responding after 2 days or so, I took the risk of deleting the entries corresponding to the tasks' name in the registry after having exporting each entry. So far, the computer seem to work even after a restart and the Task Schedule shows no error after being opened and the logs/windows in the middle also work.
From my guess, upgrading to Windows 10 failed to delete the old entries after re-arranging them in the registry.
Been noticing a number of errors when I open task scheduler for e.g. SVC Restart Task - The task XML contains a value that is incorrectly formatted or out of range" Other than the aforementioned task there are errors with the following:
a) Schedule Scan b) Reboot c) Policy Install d) Queue Reporting e) sih f) Scheduled Start g) Automatic App Update
I am a member of the WIndows Insider programme, and these errors have persisted across different builds including the latest one 10240. These were reported to MS thru the Feedback app.
I downloaded the official ISO today and upon doing a clean install noticed the errors.
Application Log entries read as follows:
Error 16385 "Failed to schedule Software Protection service for re-start at 2115-07-05T14:11:34Z. Error Code: 0x80041318"
This happens every 30 seconds or so for about 3 minutes. And starts again every time I launch an MS Office program.
I have tried the old trusted method of deleting the relevant registry entries and importing the task XML to no avail.
I have installed Speedfan and it won't run at the windows startup, so I tried to schedule it in task scheduler, I am not familiar with using it and wondered if there is a guide for W10 64
I'm trying to set up a task using Task Scheduler to run a game which is on one of my secondary drives, drive F: - I have Windows 10 installed on the C: drive.
The problem I'm having is Task Scheduler doesn't seem able to start a program if it's on any drive except C: - I can create a task to run any program or open any file if it's on the C: drive, but nothing runs if it tries to access the F: drive.
As an experiment, I created a simple task to open a jpeg picture - it opened no problem on the C drive, but on the F drive I was prompted to pick an application to open it with (I chose Windows picture viewer) after which the jpeg wouldn't open/load.
What I can do to create a task which will run on my F drive?
When I access Task Scheduler, an error appears that says SqmUpload_S-1-5-21......... no longer exists. To see the current tasks, click Refresh. However, the same message appears when I click Refresh. I can close the message and it appears the Task Scheduler is OK. A person on the Microsoft boards gave me several steps to follow beginning with booting into Safe Mode. However, I received a message when I accessed Task Scheduler that it doesn't function in Safe Mode.
At one time I was showed how to set an alarm using Task scheduler. It worked great when I was using Windows 7. Since I have upgraded to Windows 10, it doesn't work anymore.
I put in the scheduler the same words but when it is time to go, a pop up comes and asks
"what program do you want to use to open this?" I am using a mp4 file and I have it associated with my VLC player. It opens up great from within the folder however doesn't work using the Task scheduler.
I have a Windows 10 Laptop. Tried using Task Scheduler to automatically run Good Sync program on a predefined schedule. However, it fails to run the program. My user account has administrative priviledges.
I scheduled a task in scheduler and now it just won't boot up is there any way I can get it to stop. I can't even remember what task it was. But I thought maybe isn't there a way to like edit the registry offline through parted magic while its offline to stop whatever it is?
Task Scheduler service found a misconfiguration in the NT TASKMicrosoftWindowsMedia CenterRegisterSearch definition. Additional Data: Error Value: %SystemRoot%ehomeehPrivJob.exe.
I'm running a task schedule to run a program at a certain time. It worked great in windows 7 but since I upgraded to 10 nothing happens when the task is run. I've run SFC and Dism see below and no problems found.
C:WINDOWSsystem32>sfc /scannow
Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations.
In my LAN I have a PC, NAS and a Laptop. I need to schedule a backup from NAS to PC once a week. My NAS automaticaly powers on but I need my PC to do the same and to copy certain folders from NAS to a backup folder in my PC. The NAS has a letter asigned in my PCs Windows Explorer. Fist, it needs to delete those folders from the previous backup, and then to start backing up from NAS.
My monitor keeps turning on in the middle of the night (desktop on 24x7) and I went through the power settings (advanced) and turned off network/keyboard/mouse pwr mgmnt in device manager. It still keeps turning on overnight but I don't know specific time.
Under powercfg - waketimers I see one entry for mcupdate scheduled. I went into turn windows features on/off via control panel and under Media there is only Media Player, there is no Windows Media Center that I could uncheck. How can I turn this *feature* off and hopefully it won't impact windows updates, my malwarebytes or avast scans (which both run after midnight at some point).
I was thinking it was Avast turning on monitor to display results of scan. Only issue it sees every night is unable to access my Outlook *.ost files for 2 email accounts. I think I just need to know how to disable the mcupdate task but haven't found exactly where to do this. What is turning my monitor on overnight. I physically turn it off when done using the PC and this only happens overnight while asleep.
My wife's machine, she has an 'action' button and 'action' panel on her 'task scheduler' window.There is no 'action' button on my 'task scheduler' window.Neither is there an 'action' panel on the right side of my 'task scheduler' window.
After upgrade to windows 10, tasks still run but don't appear in task scheduler so I can't edit them. Where are they kept? More importantly, how to I get them to show up where I can edit them?
When opening Task Scheduler I get at least 50 boxes I have to close before I can exit the program (or use task manager to do so.)
I am creating a task in the task scheduler to delay the startup of OneDrive for 5 minutes and it is working but when it launches it is opening a window instead of minimizing or running in background. I am using "minimize" as argument but it's not working.
What do I use to get it to launch in the background?
So when I try to start up task scheduler it says remote computer was not found. I have tried many things to fix this. I am now running sfc /scannow and have tried to regedit back to original values to no avail. Its dependencies are running and it has full permissions...
I am trying to set up Task Scheduler to run a .vbs script file. The script runs without a problem if I double-click on the file, but if I try to run it using Task Scheduler, a windows headed "How do you want to open this file?" appears, and Microsoft Windows Based Script Host is not listed as an option. I have performed a repair install of Windows 10, but even this did not work.
or a few days now I am unable to install or uninstall anything, do a anti-virus-scan, run anything as administrator, opening an .exe-file or simply opening the Task-Manager. I always get the same error message (see attachment). Except when I'm in Safe Mode.
Avira-Systemcheck in Safe Mode doesn't find anything bad and so I have no clue what causes this and how to repair it.
Say I have a desktop 1 with MS Word open. If I then open another desktop (desktop 2), and then open a word file from my hard drive on desktop 2, windows 10 will take me out of desktop 2, put be back on desktop 1, and then open the file I requested. I then have to open the desktop switcher, and manually drag the word document from desktop 1 to desktop 2.
Effectively, if I have a window of one application open in one desktop, and I then open the same application in a different desktop, windows will move me back to the original desktop and open the application there.
This is extremely annoying and occurs with all applications, is there any way to fix it?
I've been having this issue with Java Update Scheduler running on his own and ramming my CPU usage to 80%, 10 to 15 minutes every time after I boot the PC, and every time I need to manually close it. I've searched it up online and people recommended setting s manual task scheduler for it, I did, it didn't work .
Some people recommended disabling "check for updates" in the Java configure window but I didn't even have Java installed, where this came from and how that process starts and why. So I installed Java, disabled updates and I still get this issue every time I boot the PC, I officially give up since I don't know what to do anymore.
I installed Win 10 from win 7 successfully. After a day I have lost half of the win 10 actions . i.e., menu looks like Win 7, have lost Edge Nd Mail tells me it is still working. The Win 10 Desktop also does not show.