I have been considering getting the Surface 3 to use in class as an electronic notepad of sorts, as well as for general consumption use. I also have an ultrabook running W10, and when I'm at home I like to work using an external monitor. Obviously I can't lug a monitor to the library, but I was hoping maybe the Surface 3 would be able to serve that purpose when I work there. I know that there are Android and iOS apps that turn a tablet into a monitor, but are there any that do the same for Windows? The app can be a Store app or for the desktop, no matter.
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
I got an external monitor today that does not have speakers included. I was surprised to find that when the monitor is connected (over DisplayPort) sound will not come out of my bluetooth speaker or my Windows 10 powered laptop's main speakers. How can I get around this huge issue??
I know our Surface Pro 3 has a lower volume threshold when you listen via headphones or speakers. Put the volume at 100% and for some of us, the volume is not loud enough.
I plugged my Surface Pro 3 into my docking station which is then connected to my ASUS VG248QE (external monitor). The volume, in my opinion is not loud enough at 100%. I am not looking to wake up my neighbors but I am looking to listen to a movie/TV show loud enough where the AC noise does not get in the way or any external outside noise.
Today I took the plunged into the windows 10 experience. Everything is great and all but my speakers that are plugged into my external monitor, via hdmi, aren't being recognized. I have confirmed that the speakers do still work, by testing them with my phone. My computer does sport an Realtek HD audio device. Windows says the drivers are up to date when checked with device manager for both.
I do know i can plug the speakers straight into my laptop, but the speaker wires aren't long enough to reach to that side of my laptop on my current set up. My external monitor is a g247hl, not that it should matter. plugged into that is a Logitech speaker system and a lenovo speaker system (through a slitter).
I'm trying to just run my laptop as a desktop, as the screen hinges are faulty. Its a Lenovo Y410P. I know how to switch the display to the external monitor in the control panel settings. But I want to make it so that I can put the laptop to sleep or restart the laptop, and upon boot up have the login be displayed on the second monitor exclusively.
Currently, when the laptop is started from sleep or restarts, it will display everything only on the laptop screen. Then I have to open up the laptop, switch settings and send it to the external monitor.
Monitor is a ViewSonic VA2265smh. I'm running this via HDMI cable.
I have a Dell XPS 13 (2016) with a Dell USB-C adapter. It will not detect my NEC LCD external monitor. I have tried a Dell USB-C adapter and a D-SUB cable to the monitor. I have also tried a Monoprice USB-C adapter with a Monoprice HDMI cable. Neither work. The monitor works fine with my Mac. I have told the computer to extend and duplicate the display using the Windows-P command. I have tried to update the driver for the monitor (I have NEC's driver), but it will not install because the monitor is not detected.
I have a 2013 Lenovo Helix running Windows 10 that I'm using for college. I'm trying to connect it via mini-displayport adapter to hdmi to dvi to my Acer G276HL monitor. I've tried updating the drivers for my Helix, which didn't work. Next I tried installing the driver from Acer's website using the manual method in device manager.When I installed Acer's drivers, I was able to see that the computer recognized the monitor as a G276HL, but it was still just a blank black screen on the monitor.
I then found this article that seems to be what I need, but I can't figure out how to install a .inf file in compatibility mode. When I download and unzip the driver for the monitor from Acer, there are just 2 files, one is a .icm file and the other is a .inf file. Neither of these seem to be able to install in compatibility mode, as least as far as I can tell.
I have the new Acer Aspire laptop and a TV which I use as a monitor. They have worked together very happily some time now. But yesterday I had to do a forced shutdown when the start button would not work and the TV screen shrank in size and there were error messages. When I rebooted, the TV monitor stayed black and a computer screen came alive for about 10 seconds as it was rebooting, then went black. I disconnected the TV from the computer and started her up and the computer screen behaved itself.
Even if I set all of the display parameters to indicate only one screen (the computer screen), if the TV monitor is connected to the computer, I end up with two black screens.I have tried many display duplicate and extension.No new software installed.There is one clue. I disconnect the TV monitor from the computer, boot up, choose duplicates to display. Then I connect the TV monitor to the computer. What happens, for about one second, is that both screens light up.
After win10's installation my external monitor has black borders.
This was happening also with win7 after installation. with catalyst control center [which I cannot open anymore in win 10... as I have an ATI Mobility Radeon HD4670 which is not supported] I could easily fix the issue:
- open Catalyst Control Center - go to My Digital Flat-Panels - choose Scaling Options - slide the slider all the way to the right (so that it is a 0%)
So, this is a monitor scaling options (or border padding I think in windows) issue that I need to fix. I search everywhere but I cannot find any fix in win10.
I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:
- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options - plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal - plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV - reinstalling nvidia and onboard-graphics drivers and update to the latest - Made a clean install of windows, tried windows 8 also but the same result - Updated my BIOS and EC - Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable
Ok so I recently updated to Windows 10 but now when I connect my laptop to my external monitor the laptop screen doesn't show up on the external monitor.
My laptop's screen is broken so I can't see anything. The laptop is still on the screen immediately after updating so I could blindly work my way through the update screens, but someone would have to upload pictures of the screens immediately after updating to Windows 10.
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
MSI R9 390 GPU AMD Catalyst version 15.7.1 Main monitor is CrossOver QHD270 via Dual Link DVI Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
My SP3 was originally on Win 8.1. I used Microsoft's media creation tool to create a USB installer for Win 10, then upgraded to Win 10 from usb. After upgrading, I verified that Win 10 was activated. I then booted from the USB installer and did a clean install.
The strange thing is, every few days, "Activate Windows" would appear on the bottom right of my screen. When I try to activate windows, I get this:
However, sometimes upon restarting the SP3 it would be activated again.
So basically after a certain amount of time, when I reboot my Surface Pro 3 or sometimes even leave it running for that long, I wind up getting hit by an error that says that I need to verify my identity. I then have to go over to the Accounts option in Settings and then click the word "Verify" to type my PIN in, otherwise all installed Windows Store apps crash, Cortana becomes disabled and reverts back to the standard search function. I've already tried making a new User Account, reinstalling Windows 10, using an account troubleshooter, restarting and signing in with my original password (not the PIN), clearing the extra devices that are called "PC" under my account that my Surface Pro 3 seems to create every time this issue appears at URL... and Sign in to your Microsoft account, changing my Microsoft account password, and of course, verifying my identity by typing in my PIN. Nothing works. Aside from taking a hammer to the device?
Surface Pro, running Widows 10 perfectly, except when I want the on screen keyboard, selecting in the lower right task bar. It brings up another window, which allows me to select a keyboard, or scribe, then I want to select a keyboard.
BUT, every time I relaunch the keyboard, it goes thru the same process.
Why can't I have my keyboard come up without asking if I want to scribe or talk, just bring up the correct style keyboard.
I set a pin on my surface during technical preview. It worked until windows 10 went live and I updated my desktop. PIN works on my desktop, but it requires my password on the surface?
I tried to reset the security policies, but the option does not exist on the surface. I do however see red text saying "some policies on this PC are preventing some options from being shown." What policies is this referring to?
I have a surface pro 3 and I am trying to do an in place upgrade to 10. Both OSes are Enterprise versions. The install goes fine and eventually gets to a point where it will revert back to windows 8.1 with the following error: 0xC1900101-0x40017.
Small background on the machine: It is running windows 8.1 ENT, SCEP for virus scanner, is on a domain, has been originally imaged using SCCM
Here is what I have tried to get this error gone and get 10 installed:
Clean boot
Disabled all startup items from task manager and all services not marked as Microsoft
DISM /online /cleanup-image /checkhealth (succeeded) DISM /online /cleanup-image /scanhealth (succeeded) DISM /online /cleanup-image /restorehealth (Failed) Ran via command prompt and all succeeded net stop wuauserv
[Code] ....
found corrupt files but couldn't fix them.
Running offline scan not but I don't know that it will change the result of the online scan (done this before on other machines)
Tried running from local machine via extracted ISO (Failed)
Tried running from USB3 Thumb drive via extracted ISO (Failed)
I get that message on my Surface Pro 3 almost every time I sign on. When I click the "Fix" button what looks like a sign-on window briefly pops up and then disappears, then nothing else happens. Usually if I do that a few times the error will eventually go away.
