I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
I've been playing on 144HZ for about a year now. A few days ago I downloaded Windows 10, and still had 144hz. When I woke up today I only get 60hz... That's the only options both on my nvidia and monitor settings.. If I set my native resolution down to 1024x768 I can get 120hz. That looks weird, and I had 144hz on 1920x1080 native resolution yesterday..
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
This is probably the most painful issue I have with Windows 10 right now (and likely previous versions as well, but I didn't have a multi-monitor setup back then).
The monitors I have are as follows: 3840x2160 (4K UHD) monitor with preferred DPI: 144 (150%)1920x1080 (Full HD) monitor with preferred DPI: 96 (100%)
Whenever one of these monitors are set as primary, all desktop applications displayed on the secondary monitor (doesn't matter which) has blurry text. Exceptions are the Windows Store Apps like Windows Store and Microsoft Edge, along with the Taskbar/Start Menu, the Taskbar/Start Menu settings screen, the Taskbar context menu, and the desktop context menu which passes the DPI test with flying colours, with crispy text on both monitors (occasionally a DPI switch bug gets in, but I can mostly ignore that). The problem is, as you can probably guess, is that >99% of the applications I use aren't Windows Store Apps.
Here are some screenshots. The "Taskbar and Start Menu Properties" text is what the text should look like while the Visual Studio 2015 text is an example of the text most desktop apps get. The blurry image is what happens when the UHD monitor is not the primary monitor. Attachment 48493Attachment 48494 Note: Both of these screenshots came from the 150% DPI monitor so it's best viewed at that (144) DPI level. The 96 DPI monitor is similarly affected.
Things I've already tried: Reinstall the graphics driver. Did this multiple times in fact for unrelated reasons.Reinstall Windows 10 (through Reset This PC recovery option). I did this for also unrelated reasons but it definitely doesn't fix this issue.Use the XP Explorer "fix". Merely worsens the problem. Adjusting Clear Type options. Alleviates the issue a bit but see next point.Disabling Clear Type on the affected monitor. The text obviously sharpens, but it's painful to read and a close inspection of the text reveals the issue isn't solved at all, only mitigated slightly.Replacing the video card. I swapped this in with my older GTX 560 Ti but it's obvious the problem remains. Both it and my current card are NVIDIAs though, so it's vaguely possible the drivers or the cards themselves are the cause. I don't have an ATI/AMD card (that still works, at least) to test the setup and every Intel iGPU I have either has only one monitor output or is incapable of handling UHD resolutions.
Things I won't try: Setting both monitors' DPI to 96. Text would become microscopic considering the UHD monitor's actual size.Use the text resizing feature instead. I'm going take a wild guess that this is not monitor-specific and would cause everything on the HD monitor to be far too large to the point that I'd rather unplug it.
Looking for multi-resolution, multi-DPI, multi-monitor setup with or without this issue? The text is painful to read on whichever is the secondary monitor right now, and is extremely apparent whenever the background is dark.
I am cleaning out and setting up an old-ish PC and whenever I connect it to my TV or Monitor it says either "No Input to TV" or it is just black when I turn it on, I am using VGA to connect it, I tried with a GTX 650 and with just the built in graphics, and still no luck, any reason why?
I have temporarily connected a 22 inch LCD tv monitor( until i get a new one) to pc via HDMI lead but i cannot get resolution set right.The recommended native makes the taskbar disappear of screen and the desktop icons are barely visible on left side of screen.
I have tried various resolution settings but all are no good apart from one which makes the desktop look like like a laptop screen.
I have reset Windows 10 and updated Intel Graphic Card drivers to the latest but still resolution cannot be set correctly for monitor and used a VGA lead aswell.
Is it because you need a proper pc monitor to have correct resolution ?
Have a user with a Sony vaio laptop, 15" screen, 1920x1080. They also plug an HDMI cable into a 23" dell widescreen monitor for a second display. This 23" monitor is also 1920x1080. They are complaining that fonts on this second monitor are blurry. They tried to live with it a week but they said can it be made clear again like it was when they had Windows 7?
Are you familiar with the possibility of fonts being blurry only on one monitor if they are both set to the native?
I'm asking them to see if they change the font dpi to 100%, logoff and on if its any better. For whatever reason that seemed to work for my laptop (another Sony Vaio), but my concern is they will be disappointed at legibility on the laptop screen (it makes everything tiny).
I have a Dell XPS 13 (2016) with a Dell USB-C adapter. It will not detect my NEC LCD external monitor. I have tried a Dell USB-C adapter and a D-SUB cable to the monitor. I have also tried a Monoprice USB-C adapter with a Monoprice HDMI cable. Neither work. The monitor works fine with my Mac. I have told the computer to extend and duplicate the display using the Windows-P command. I have tried to update the driver for the monitor (I have NEC's driver), but it will not install because the monitor is not detected.
It worked fine in windows 7 but now when I choose "duplicate display" from the side menu popup the tv goes blank as if Ive unplugged the hdmi. All 3 of the remaining display options work including the extend display and tv only setting so its not a cable issue. Laptop model is XPS 17 L702X. Now when I used to do it in win 7 sometimes it wouldnt autodetect it so I would have to right click desktop, open invidia up and click rigorous display detect or something like that and then laptop screen would blink and make the beep noise like when hdmi cable got connected. Now in the invida panel it just simply wont allow mirroring, nothing happens when I right click on the display box that would normally show 1 and a smaller box would say 2. I dont get it but Id really like that feature back If its something simple I could do.
My computer currently has 3 monitors connected to it. 2 through the graphics card (R9 280), 1 through the integrated graphics (AMD HD 3000). Not sure when why or how, but the integrated graphics card can never pick up what type of monitor is connected to it... so it always gives me a bunch of generic 4:3 resolutions...
I've tried uninstalling the drivers and letting them reinstall. I've tried swapping around the cables to see if i could get lucky with one of the other screens, but they all face the same issues. I've tried buying brand new cables across the board because sometimes people say that's the issue. But not success.
The cloest thing i have is apparently a custom resolution setter, but it was created for windows 7 in mind and doesn't seem to work on windows 10 (PowerStrip).
My question is, is there anyway to format the list so i can select the correct resolution? It's a Toshiba TV/Monitor and it seems like every thing else attached to my pc (even 3rd party programs i tried to use to forcably change the resolution) can spot it and hand me back the correct resolution but i can't seem to change it. I get Genertic pnp through the control panel (the only place the monitor shows up in) and even then the correct driver doesn't show, it's the Microsoft Generic driver.
Mobo: MSI AMD 3000 series, cant find exact model.
I've updated my AMD drivers to the latest and so far can only modify the resolution to stock ones that look horrid on the screen. Any program in windows 10 to change the resolution of a screen.
I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:
- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options - plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal - plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV - reinstalling nvidia and onboard-graphics drivers and update to the latest - Made a clean install of windows, tried windows 8 also but the same result - Updated my BIOS and EC - Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable
Ok so I recently updated to Windows 10 but now when I connect my laptop to my external monitor the laptop screen doesn't show up on the external monitor.
My laptop's screen is broken so I can't see anything. The laptop is still on the screen immediately after updating so I could blindly work my way through the update screens, but someone would have to upload pictures of the screens immediately after updating to Windows 10.
I just updated to Windows 10 and already having problems. I have a dual monitor setup and back on windows 8, both monitors had a good display. Now on windows 10, my main monitor has a blurry or less quality compared to my second monitor. It was always fine until I switched windows.
Every time I restart or boot up my PC with my monitors turned on first I always get a issue with the monitor connected to the HDMI port, it always says "Input not supported" and all I do is turn my monitor off then back on and the issue has been resolved...
I'm trying to adjust my snap/multitasking settings to keep all of the snap settings in Windows 10 except for the ones that try to snap windows to the side of one monitor when I try to drag it to the other monitor. Is there any way to disable the snapping between the two monitors while still keeping the snap settings of dragging windows to the opposite sides/top of the screen?
I'm running my audio via HDMI from my graphics card and it plays through the speakers built into my monitor.
When I first did the Win 10 update I had no audio whatsoever, and followed some suggestions on online forums that lead me to disable the Realtek High Definition Audio which I did and upon a reboot- my HDMI audio was working.
But then I had another weird issue. My PC is set to never sleep as I use it as a media server, but my screens turn off automatically after 10 minutes. What im finding is that when I wake up my monitors the audio stops. When I view playback devices I can't do any tests because "the device is already in use by another application"
(note: I have the checkbox for allowing an application to take exclusive control of a device un-checked).
So far there are only 2 ways to restore audio. 1) restart the PC. 2) go into device manager > Sound, video and game controllers > AMD High Definition Audio Device > Disable... wait a few moments > Enable.
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
I've recently setup a secondary monitor, but the mouse simply wont lock into the screen where the game is being played (total war) and if i do end up clicking somewhere on the secondary monitor the game will be minimized which is bothersome, I have tried borderless and fullscreen but in vain.
Another issue I've had is that the secondary screen (1600x900) gets some flicker/lines whenever i use vga to connect it, but it works superb with dvi, why?
Now another thing is that when i move the mouse/cursor from the top right corner of the main monitor(1920x1080) it wont switch over to the secondary one(my idea being that the res/size is different).
Surfing the web like normal with Photoshop in the background (not doing anything on it yet)Monitor goes dark blue/green and returns to normal saying Photoshop has stopped working, and saying in the bottom right corner that the driver had failed and then recovered.
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
So I just got the dell P27Q15 monitor, it's 4K and supports 4k60hz and I have it connected over displayport, but for some reason it is not working on this monitor. I reinstalled the latest drivers on my NVidia 770m on my asus G750jx, but nothing is working. Any tips on getting this to work?
My taskbar is out of place when I connect the second monitor. I extended the view.
It happens now and then. I think it seems to be working fine until I install the internet download manager. But again it might just be my suspicion.
Once I plug out the second monitor, the taskbar goes back to normal. This issue is the same for the wall paper. When i connect, the wall paper will look ok on the laptop but looks cut away in the second monitor. Same thing goes, once I plug out it will go back to normal.
I've got a dual monitor PC running the now released windows 10. Everything about it went very smoothly, right up until I tried to change the background. At first both screens had the same image (that cool windows 10 logo with light beams picture). But of course that wasn't sufficient, so I changed it. I liked that windows 7 would rotate my wallpapers with pictures in my photo library. So I dug in and made the necessary changes, and.... then I hit an odd snag.
The two screens were showing different background pictures. At first it was cool! I was blown away. I never even thought about changing the wallpapers separately! But, I'm a creature of habit. And having that second monitor with a different wallpaper was getting on my nerves. Now, I know I can change both wallpapers to be the same picture. BUT, I'm greedy and want it all! I want it to also show the slideshow of all the photos.... one at a time, on both screens, at once.
On a side note, whenever I right click the desktop and ask windows to skip ahead to the next desktop background, it does one screen only. I have to do it again and then the other screen will change. If they HAVE to be separate, I'd at least like some control over them.