Computer Doesn't Reboot Back After Restart
Jan 21, 2016
I just currently started having this issue. My computer runs completely fine. However I applied recent windows 10 upgrades and I for some reason had to restart I cant remember why. However after the initial restart the computer simply stayed on and didn't initiate boot. I then turned off the computer and turned it back on. It boots fine, no problems. However if I set the computer to restart from the start menu it will but it wont boot back. It will just stay on and make a louder fan noise but wont reboot?
View 7 Replies
Similar Messages:
Jan 15, 2016
I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
View 1 Replies
Aug 31, 2015
Noticed that after an update from Windows Update you "Must" do a Reboot for the installation/update to process. In prior versions of Windows when I would take an update, I might just wait until I shut the PC down for the night, and it would finish up in the morning upon startup. In Windows 10 that no longer works (for me) it MUST be a Reboot for it to process...
View 9 Replies
Dec 23, 2015
A few days ago my Pc started to act slow and slugging so i restarted it a couple of times and on the 3rd reboot it started a disc check. Once it finished it worked flawlessly BUT it had reverted to a previously unknown restore point. Ok i thought and reinstalled some programs that were missing and went to bed. Next day i booted it up and all the programs were missing again.....The same unknown restore point was back! Curious now, i installed a program, rebooted the pc, and once again, same restore point! Just what is happening?
View 4 Replies
Oct 10, 2015
When I try to install windows 10 into my newly built pc, everything goes normally... then it says that the pc need to reboot, and it does. After the reboot, the windows logo appears and it brings me back to the windows installation process.
View 1 Replies
Dec 13, 2015
Can't close my system since windows 10 (only forced ) And also its not possible to do a restart
View 1 Replies
Jul 31, 2015
I have windows 8.1 installed on my laptop and when I try to upgrade to windows 10, it overheats, shuts down and when I restart it, goes back to windows 8.1.
My fans are clean and everything works just fine with the laptop, I don't understand why is this happening. I also have a friend with a similar laptop model who is having the same overheating problem when upgrading to windows 10 (in his case, from windows 7).
View 2 Replies
Sep 22, 2015
Problem back with 10547. Windows Update trying to install 15 year old driver for printer. Previously hid the update with Wushowhide and it was gone for months. Back again this morning. Reran Wushowhide and it showed the update was hidden but still there after restart.
View 1 Replies
Sep 5, 2015
On my system, I have Automatically Restart set in the system failure but when it BSOD's, it says that the system will restart after the dump but it appears it just stays at the blue screen without restarting even after an hour on atleast 3 occasions since I've upgraded to Win10 from Win7 Home Premium on August 11, 2015, the system is able to restart and shutdown normally.
View 9 Replies
Mar 5, 2016
I leave my pc running most of the day and it locks either manually (windows key + L) or locks through screensaver. After 10 mins the screen is set to turn off.
Sometimes when I move the mouse or tap the keyboard to wake the monitor it comes up with the logon screen but the password box is black rather than white which is ready to type in the password.
Nothing else works other than pressing the button on the pc to restart.
View 5 Replies
Aug 5, 2015
I have a Barebone PC (Gigabyte GB-BXI3H-5010) which was running Windows 8.1, and now it has been upgraded to Windows 10. I use this PC to run a home server with Plex media server and Plex Home Theater - so I've got it connected to the TV, and the PC is always on. So when I turn on the TV, I have to press any button on the keyboard or move the mouse for the graphics card to kick in, which is fine. But when it does, it goes to a blank desktop. There's nothing there. I can see the open apps listed in the start tray, but none of them open. I'm quite confused to be honest. It's connected via HDMI to an LG TV.
View 1 Replies
Oct 3, 2015
The generic PnP monitor driver in the device manager keeps reenabling/reinstalling itself whenever I restart Windows 10 on my early 2011 MBP (Boot Camp). I want to leave it disabled so the brightness controls on the keyboard work, otherwise they don't.
I do not want to disable automatic driver update checking by Windows 10. I know that if I turn off automatic driver installation via device installation settings and enabling "Prevent installation of other devices not described by other policy settings" will keep the "Generic PnP Monitor" driver uninstalled, and this is certainly one solution that works, but disabling these features interferes with the installation of other devices (one example is the TAP driver for the Private Internet Access Windows client).
There is no available apple display driver I can install over the generic driver that I have found, but the brightness controls work perfectly when the Generic PnP driver is disabled/uninstalled. I just wish it'd stay that way after a restart.
View 1 Replies
Sep 29, 2015
I set up a wake-up alarm in the Computer management --> Task Scheduler that automatically plays a custom mp3 every morning at 7AM.The speaker is in my monitor and it goes sleep 10 min after idle. It's ok, I don't want to keep it turned on for whole nights. But, when the scheduled alarm comes, it does not automatically turn back on the monitor and therefore its speaker doesn't play the MP3 because the monitor remains in sleep.I tired various ways to make the alarm turn the monitor back on but failed.I just need my music file played as an alarm in the mornings.
View 1 Replies
Sep 12, 2015
So, just installed Windows 10 and things seem to be doing pretty good but the computer is in bad need of a reset still. Following the recommendation of Microsoft, I've gone ahead and installed Windows 10 and am now ready to proceed. I pull up the boot menu, select reset and to remove all files and the computer boots up as normal. Then, it comes up with a screen asking if I just want to clean out my main driver or all drives. The problem is there is no mouse, I can't select it. I've hit all the keys on the keyboard I could think of (F keys, number keys, arrow keys and enter) to no avail. And thus, I had to abort and come back here. Why my mouse is not working then? It's working now so it doesn't seem to be an issue with it.
View 5 Replies
Dec 16, 2015
There are certain sound inputs that I do not wish to use.So, I disable them. However, when I reboot my computer all of them are active again. How can I make them permanently inactive?
View 2 Replies
Sep 18, 2015
The store we went to sold us a computer they had on display. They didn't reset the computer and left their administrators on the computer. I've installed google chrome office 365 and downloaded documents but when it sleeps or when i've restarted the computer everything "saved" is gone. Will reverting back to a previous system as suggested here [URL]
View 5 Replies
Oct 31, 2015
I am having troubles downloading the win 10 upgrade from Microsoft. I have did the updates but my computer shutdown and then reboot in the middle of download. I have installed a new PSU already that seems to stabilizes win 8.1. I can't seem to get win 10 download from shutdown my pc from finishing the download.
View 1 Replies
Sep 21, 2015
So today I tried to update to windows 10 from windows 7 through the "get windows 10" app on my desktop. Everything went well until reboots started. When my computer attempted to reboot it stuck at start up screen where you are supposed to either go to boot menu by pressing f12 or let your system boot like it should.
View 1 Replies
Aug 7, 2015
Upgrade from win 8.1..The install was very smooth when I upgraded, i am having minimal problem with my pc. the only problem is that at the moment, random of times my pc will automatically reset with out warning, no BSOD, no errors. Here is how it will go,
Playing game
Sudden power off (sometimes up to x3)
Restart (sometimes up to x3)
then it will auto automatically boot to windows and ill have a full day before it does it again.
My PC specs are provided.....
View 7 Replies
Feb 10, 2016
My Lenovo PC suddenly shut down today and when I restarted it I got a BSOD with a 'bad pool header' message. I did eventually restart but soon shut down again with a 'k mode exception not handled' message. Now when I restart I get a blue page 'RECOVERY Your computer could not start properly. A required device isn't connected or can't be accessed. Error: 0xc0000225.'
I have a windows 10 system repair disk but when I try and boot from it I get 'non system disk or disk error'.
I recently (2 weeks ago) replaced the hard drive because the old one was showing SMART errors. I cloned the old disk to an identical disk and it seemed to be going fine until today. Not sure quite what to do next.
View 9 Replies
Nov 12, 2015
Since installing Win 10 my computer will restart on its own if the electrical power "blips" or I unplug the unit and plug it back in. It did not happen when I had Win 7.
I also have to manually restart the system twice to get past the black screen with the blue window. If I go to safe mode using msconfig to change boot method I usually do not have the problem. But everything seems to slow down.
View 1 Replies
Dec 31, 2015
I just built a new pc. Specs are Asus Z87-Pro Motherboard, Intel i7 4790k, 16gb RAM, 3T seagate HD. Everything has been performing well on my computer except for when it needs to restart. When I go into windows and click shutdown it has no problem but when I click restart it will exit windows and turn off the display but the computer will remain running and will not boot back up.
I have to manually press the power button to turn it off and then press it again to boot it back up. This also happens when it needs to restart from other programs. From what I have found is it may have to be something with bios versions or settings but I honestly have no clue. I have the most recent bios update for my mobo and I haven't found any settings that would fix this in my bios either.
View 1 Replies
Oct 3, 2015
Today i turned my computer on and for some reason I cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
View 1 Replies
Nov 3, 2015
I recently replaced the mobo and the CPU on this system. I am getting BSOD and/or the computer randomly freeze or restart on its own. I did run the computer in safe mode for a whole day and did not have any of the aforementioned issues.
View 1 Replies
Aug 27, 2015
When I restart my computer, ie after installing an update, it hangs at the restart screen and I have to press power button to reboot system.
View 3 Replies
Oct 3, 2015
Today i turned my computer on and for some reason i cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
View 1 Replies
