Drivers/Hardware :: Flash Drives Have Become Invisible In (PC And Disk Management)
Oct 1, 2015
After installing Win-10 with a Flash Drive, The Flash Drive no longer visible either in My PC Folder or in Disk Management Thought this was a Isolated incident, Apparently not as 2 other flash dives i have have also disappeared, Really strange as 1 of the flash drives is less then 2 weeks old, Tried to find them using CMD & Diskpart but noting visible there either .
Flash Drive 1 16GB - Kingston DataTraveler 2.0
Flash Drive 2 16GB - SanDisk Cruiser Blade 2.0
Flash Drive 3 8GB - Was a Gift Dont Know Make 2.0
My Motherboard is USB v3.0 (Incase u need this info)
View 1 Replies
Similar Messages:
Nov 7, 2015
under disk management its showing two C drives one with
Healthy (OEM Partition)
Healthy (Boot, Page File, Crash Dump, OEM Partition)
recently upgraded from windows 8.1 to windows 10.
upon right click it only showing help.
View 2 Replies
Nov 24, 2015
Problem:
I have a 2TB seagate barracuda HDD that is not showing up in:
- disk management
- CMD -> diskpart -> list disk
It does show up in:
- device manager
- bios
- Intel rapid storage technology
Screenshots:
Specs:
CPU: I5 6500
Motherboard: GA-Z170XP-SLI
Windows 10
I also tried switching out cables and ports. Same results.
View 5 Replies
Jan 29, 2016
Lately, every flash drive I've bought requires to be NTFS formatted. Quick formatting gives me the option to change allocation size. Is there a specific size I should be using or just go small?
View 4 Replies
Oct 19, 2015
I have recently bought a 32gb micro sd card from eBay and was wondering if there is some kind of check I can do to make sure it has correct memory on it, I have heard that some of the sd, hard drives and flash cards from eBay are being faked and what looks like a 500gb hard drive people find out later that its just a 1gb flash drive inside with some kind of modded files in it that makes it look like a 500gb drive, upon transferring files they just delete anything past 1gb.
View 5 Replies
Feb 10, 2016
There is no drive assigned. I wonder what it refers to? I've checked the registry but can't figure it out. How would I remove it?
View 1 Replies
Oct 27, 2015
I just installed Win 10. First impression is that I'm not impressed with the new design. I think mobile devices are ruining the internet.How do I get to disk management? Is it similar to Win 7? how do I get to Services and Event Viewer?
View 9 Replies
Jan 2, 2016
My WD red 1tb hard drive wont appear on disk management but I know it is being found some how because it comes up under hardware.
View 1 Replies
Mar 11, 2016
I have received this message about not enough storage on my OC (C: ). So I searched and made changes to some of my files such as MyDocuments. I changed the location of it to my other disk (D: ). However, after a few days I get that message again so I have searched it up again and merging my extra space from other drive into OS(C: ). Perhaps looking at the image attached would explain my situation better than my English
My OC(C: ) Is only 119 GB and its almost full, yet I have plenty of storage in "Disk 2" as my "Data 2" File is empty.
View 8 Replies
Aug 13, 2015
The latest windows 10 update caused my computer to no longer recognize my second hard drive. How to get my drive It doesn't show up in disk management either.
View 1 Replies
Oct 24, 2015
Experiencing an issue of flash drives that are detected and functioning fine for a while spontaneously losing their connection to Win 10 Home? I don't have the issue in Win 7. One of the devices is brand new and has never been used on any other PC or OS. I reformatting another one that was originally provisioned on XP. No change afterwards, it still works fine in Win 7 and still has the issue in Win 10.
View 1 Replies
Feb 20, 2016
When I go to disk management and right click on my # 2 HDD to give it a drive letter, it only shows Convert to Dynamic Disk, Properties and Help. change drive letter and paths does not show up ??.
View 1 Replies
Aug 21, 2015
My Windows 10 File Explorer is muddled showing many items, and in particular USB Flash Drives twice!
View 4 Replies
Oct 6, 2015
Is their anyway to speed up window 10 have tried deleting all history,flash,java and cleaning up disk nothing seems to work...
View 1 Replies
Aug 26, 2015
In my device manager my canon printer is listed under Disk drives, USB connection?? Its also listed correctly under printers too. Should I remove it from being listed under disk drives?? or leave it alone?
View 2 Replies
Nov 17, 2015
Running windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
View 5 Replies
Nov 4, 2015
I am working with windows 10 and see that I have Windows Defender to scan drives...how do I scan flash drives to see if they have any problems?
View 7 Replies
Feb 10, 2016
I have a USB flash drive which for some reason is formatted with an active partition.
I usually use Minitool Partition Wizard to set a partition as inactive but for some reason it doesn't work on this flash drive. I also tried booting from the Partition Wizard boot disk but that won't set the partition inactive either. I even deleted the partition and reformatted the flash drive but it popped up as active again!
How can I force the partition to be set inactive? Note it's quite an old USB flash drive so I'm wondering if there something in the hardware which stops it being set inactive?
View 9 Replies
Dec 6, 2015
I recently purchased a Windows 10 tablet, everything else works fine except one annoying issue. I have a 64 GB USB 2.0 flash drive, which works well on my desktop PC (Windows 7). I also have another 16 GB USB stick (USB 2.0). Both USB sticks work fine on my desktop PC. However, when I test the full size USB port on my tablet, only the 16 GB USB stick worked. For the 64 GB USB stick, as soon as I plug it in, the USB light starts to blink forever.
While the USB light blinks, I keep hearing the windows sound for detecting new USB device, but see no notification messages. When I open DISK management or File explorer, I see no trace of this USB stick at all. I also checked "device manager", under USB controllers, I do NOT see any USB Mass storage there, and there are no unknown device in the device manager either. I tried re-scan devices, restart computer, clean USB registry ... None of them works. Then I choose to show "hidden devices" in device manager, and now see a new "USB Mass Storage Device" appear under USB controllers, however the status is "not connected", even though the USB stick is plugged in and the light is blinking.
As I said, I tested the USB stick with my other computer and worked fine. I also tested the tablet's USB port by plugging in other USB devices, such as a 16 GB USB stick, a MicroSD USB reader with a 32GB MicroSD inserted, a USB mouse, etc. and they all worked fine. Now I am really puzzled. It does not look like my USB stick is dead or the USB port on the tablet has any problem.
View 9 Replies
Oct 18, 2015
I need to disable Flash Hardware Acceleration in edge. My videos are green screens. Where I can do this? The only option I seem to have is to switch Flash off in Edge?
View 2 Replies
Oct 19, 2015
I recently used a 16GB USB flash drive to create an installer for a new Linux distro. I noticed that the created partition is 8GB and the rest 8GB is unused. I want to create a second NTFS partition so I can use the USB as a recording medium for my PVR, but Disk Management doesn't give me this option. I then used MiniTool Partition Wizard Home Edition, which did create the partition but warned that it won't be recognized by Windows as it normally sees only the first partition on a USB Flash drive. I even went back to Disk Management and assigned a drive letter to the second partition, but in Explorer I see only the EFI partition (first, drive is formatted in GPT mode) with that drive letter. Is there any workaround? Of course I could just format the whole drive as NTFS, but I wouldn't like to do so until I don't need the installer anymore.
View 9 Replies
Jan 26, 2016
I have a Windows 7 PC with 3 DVD drives. Imgburn shows them as connected to 3 different SATA busses: [2:0:0], [3:0:0], and [4:0:0].
After upgrading to Windows 10, all of them ended up on the same bus, [2:0:0], like this:
Why did that change? I tried connecting them on different SATA plugs, but they are always shown on that [2:0:0] bus. The thing is, I really need them to be on different busses, because of a particular requirement of a legacy application I use.
View 4 Replies
Aug 22, 2015
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
View 1 Replies
Nov 16, 2015
Why my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
View 3 Replies
Feb 23, 2016
I've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
View 1 Replies
Nov 28, 2015
So I have set up my SSD and using it for my OS (Win10) and my F drive (1TB HDD) as a drive for my programs and documents, however when I try to search for items vis Windows Start Menu it only shows items for my C drive, how to make it to search both drives for documents/files?
View 6 Replies
